From 6d7e10038aba81d7273f72f36db64c71ae7f8f69 Mon Sep 17 00:00:00 2001 From: Nagesh Koneti Date: Wed, 25 Sep 2019 12:01:19 +0530 Subject: [PATCH] staging: fsl_ppfe/eth: Disable termination of CRC fwd. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit LS1012A MAC PCS block has an erratum that is seen with specific PHY AR803x. The issue is triggered by the (spec-compliant) operation of the AR803x PHY on the LS1012A-FRWY board.Due to this, good FCS packet is reported as error packet by MAC, so for these error packets FCS should be validated and discard only real error packets in PFE Rx packet path. Signed-off-by: Nagesh Koneti Signed-off-by: Nagesh Koneti <“koneti.nagesh@nxp.com”> --- drivers/staging/fsl_ppfe/pfe_hal.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/drivers/staging/fsl_ppfe/pfe_hal.c +++ b/drivers/staging/fsl_ppfe/pfe_hal.c @@ -860,8 +860,9 @@ void gemac_set_mode(void *base, int mode /*Remove loopbank*/ val &= ~EMAC_RCNTRL_LOOP; - /* Enable flow control and MII mode and terminate received CRC */ - val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE | EMAC_RCNTRL_CRC_FWD); + /* Enable flow control and MII mode.PFE firmware always expects + CRC should be forwarded by MAC to validate CRC in software.*/ + val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE); writel(val, base + EMAC_RCNTRL_REG); }