From 5f1a35c3f5c17cc6229873248a56784fcd03db1c Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Fri, 27 Sep 2019 15:18:41 +0800 Subject: [PATCH] serial: fsl_lpuart: enable two stop bits Add two stop bits support. User can run the command to enable two stop bits for test: stty cstopb -F /dev/ttyLPx Signed-off-by: Fugang Duan --- drivers/tty/serial/fsl_lpuart.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2135,11 +2135,12 @@ lpuart32_set_termios(struct uart_port *p { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); unsigned long flags; - unsigned long ctrl, old_ctrl, modem; + unsigned long ctrl, old_ctrl, bd, modem; unsigned int baud; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL); + bd = lpuart32_read(&sport->port, UARTBAUD); modem = lpuart32_read(&sport->port, UARTMODIR); /* * only support CS8 and CS7, and for CS7 must enable PE. @@ -2176,7 +2177,9 @@ lpuart32_set_termios(struct uart_port *p } if (termios->c_cflag & CSTOPB) - termios->c_cflag &= ~CSTOPB; + bd |= UARTBAUD_SBNS; + else + bd &= ~UARTBAUD_SBNS; /* parity must be enabled when CS7 to match 8-bits format */ if ((termios->c_cflag & CSIZE) == CS7) @@ -2246,6 +2249,7 @@ lpuart32_set_termios(struct uart_port *p lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), UARTCTRL); + lpuart32_write(&sport->port, bd, UARTBAUD); lpuart32_serial_setbrg(sport, baud); lpuart32_write(&sport->port, modem, UARTMODIR); lpuart32_write(&sport->port, ctrl, UARTCTRL);