From 6a313b6072925ab757688328b9f91b16d5a39bb3 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 9 Feb 2018 10:11:32 +0800 Subject: [PATCH] MLK-17380-4 usb: host: xhci: add EH SINGLE_STEP_SET_FEATURE Test for USB2 This function is similar with EHCI's, but implemented using XHCI. The USB2 host needs to send SETUP packet first, then wait 15 seconds before DATA (IN) + STATUS stage. It is needed at USB Certification test for Embedded Host 2.0, and the detail is at CH6.4.1.1 of On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification Acked-by: Jun Li Signed-off-by: Peter Chen (cherry picked from commit 8d46e3bca527a5d899446d3858274fb5cbab1a1e) --- drivers/usb/host/xhci-hub.c | 9 ++++ drivers/usb/host/xhci-ring.c | 123 +++++++++++++++++++++++++++++++++++++++++++ drivers/usb/host/xhci.c | 1 + drivers/usb/host/xhci.h | 10 ++++ 4 files changed, 143 insertions(+) --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1420,6 +1420,15 @@ int xhci_hub_control(struct usb_hcd *hcd /* 4.19.6 Port Test Modes (USB2 Test Mode) */ if (hcd->speed != HCD_USB2) goto error; +#ifdef CONFIG_USB_HCD_TEST_MODE + if (test_mode == EHSET_TEST_SINGLE_STEP_SET_FEATURE) { + spin_unlock_irqrestore(&xhci->lock, flags); + retval = ehset_single_step_set_feature(hcd, + wIndex + 1); + spin_lock_irqsave(&xhci->lock, flags); + break; + } +#endif if (test_mode > TEST_FORCE_EN || test_mode < TEST_J) goto error; retval = xhci_enter_test_mode(xhci, test_mode, wIndex, --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3580,6 +3580,129 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * return 0; } +#ifdef CONFIG_USB_HCD_TEST_MODE +/* + * This function prepare TRBs and submits them for the + * SINGLE_STEP_SET_FEATURE Test. + * This is done in two parts: first SETUP req for GetDesc is sent then + * 15 seconds later, the IN stage for GetDesc starts to req data from dev + * + * is_setup : argument decides which of the two stage needs to be + * performed; TRUE - SETUP and FALSE - IN+STATUS + * Returns 0 if success + */ +int xhci_submit_single_step_set_feature(struct usb_hcd *hcd, + struct urb *urb, int is_setup) +{ + int slot_id; + unsigned int ep_index; + struct xhci_ring *ep_ring; + int ret; + struct usb_ctrlrequest *setup; + struct xhci_generic_trb *start_trb; + int start_cycle; + u32 field, length_field, remainder; + struct urb_priv *urb_priv; + struct xhci_td *td; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + /* urb_priv will be free after transcation has completed */ + urb_priv = kzalloc(sizeof(struct urb_priv) + + sizeof(struct xhci_td), GFP_KERNEL); + if (!urb_priv) + return -ENOMEM; + + td = &urb_priv->td[0]; + urb_priv->num_tds = 1; + urb_priv->num_tds_done = 0; + urb->hcpriv = urb_priv; + + ep_ring = xhci_urb_to_transfer_ring(xhci, urb); + if (!ep_ring) { + ret = -EINVAL; + goto free_priv; + } + + slot_id = urb->dev->slot_id; + ep_index = xhci_get_endpoint_index(&urb->ep->desc); + + setup = (struct usb_ctrlrequest *) urb->setup_packet; + if (is_setup) { + ret = prepare_transfer(xhci, xhci->devs[slot_id], + ep_index, urb->stream_id, + 1, urb, 0, GFP_KERNEL); + if (ret < 0) + goto free_priv; + + start_trb = &ep_ring->enqueue->generic; + start_cycle = ep_ring->cycle_state; + /* Save the DMA address of the last TRB in the TD */ + td->last_trb = ep_ring->enqueue; + field = TRB_IOC | TRB_IDT | TRB_TYPE(TRB_SETUP) | start_cycle; + /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */ + if ((xhci->hci_version >= 0x100) || + (xhci->quirks & XHCI_MTK_HOST)) + field |= TRB_TX_TYPE(TRB_DATA_IN); + + queue_trb(xhci, ep_ring, false, + setup->bRequestType | setup->bRequest << 8 | + le16_to_cpu(setup->wValue) << 16, + le16_to_cpu(setup->wIndex) | + le16_to_cpu(setup->wLength) << 16, + TRB_LEN(8) | TRB_INTR_TARGET(0), + /* Immediate data in pointer */ + field); + giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, + start_cycle, start_trb); + return 0; + } + + ret = prepare_transfer(xhci, xhci->devs[slot_id], + ep_index, urb->stream_id, + 2, urb, 0, GFP_KERNEL); + if (ret < 0) + goto free_priv; + + start_trb = &ep_ring->enqueue->generic; + start_cycle = ep_ring->cycle_state; + field = TRB_ISP | TRB_TYPE(TRB_DATA); + + remainder = xhci_td_remainder(xhci, 0, + urb->transfer_buffer_length, + urb->transfer_buffer_length, + urb, 1); + + length_field = TRB_LEN(urb->transfer_buffer_length) | + TRB_TD_SIZE(remainder) | + TRB_INTR_TARGET(0); + + if (urb->transfer_buffer_length > 0) { + field |= TRB_DIR_IN; + queue_trb(xhci, ep_ring, true, + lower_32_bits(urb->transfer_dma), + upper_32_bits(urb->transfer_dma), + length_field, + field | ep_ring->cycle_state); + } + + td->last_trb = ep_ring->enqueue; + field = TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state; + queue_trb(xhci, ep_ring, false, + 0, + 0, + TRB_INTR_TARGET(0), + field); + + giveback_first_trb(xhci, slot_id, ep_index, 0, + start_cycle, start_trb); + + return 0; +free_priv: + xhci_urb_free_priv(urb_priv); + return ret; +} +#endif /* CONFIG_USB_HCD_TEST_MODE */ + /* * The transfer burst count field of the isochronous TRB defines the number of * bursts that are required to move all packets in this TD. Only SuperSpeed --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -5364,6 +5364,7 @@ static const struct hc_driver xhci_hc_dr .disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout, .find_raw_port_number = xhci_find_raw_port_number, .clear_tt_buffer_complete = xhci_clear_tt_buffer_complete, + .submit_single_step_set_feature = xhci_submit_single_step_set_feature, }; void xhci_init_driver(struct hc_driver *drv, --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2144,6 +2144,16 @@ int xhci_find_raw_port_number(struct usb struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd); void xhci_hc_died(struct xhci_hcd *xhci); +#ifdef CONFIG_USB_HCD_TEST_MODE +int xhci_submit_single_step_set_feature(struct usb_hcd *hcd, + struct urb *urb, int is_setup); +#else +static inline int xhci_submit_single_step_set_feature(struct usb_hcd *hcd, + struct urb *urb, int is_setup) +{ + return 0; +} +#endif #ifdef CONFIG_PM int xhci_bus_suspend(struct usb_hcd *hcd);