From 1e759a179923236660f7f2070fd52e9d2cc09b22 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 2 Mar 2016 07:18:52 +0100 Subject: [PATCH 48/91] net-next: mediatek: document MediaTek SoC ethernet binding This adds the binding documentation for the MediaTek Ethernet controller. Signed-off-by: John Crispin Acked-by: Rob Herring Cc: devicetree@vger.kernel.org --- .../devicetree/bindings/net/mediatek-net.txt | 77 ++++++++++++++++++++ 1 file changed, 77 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/mediatek-net.txt diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt new file mode 100644 index 0000000..5ca7929 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -0,0 +1,77 @@ +MediaTek Frame Engine Ethernet controller +========================================= + +The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs +have dual GMAC each represented by a child node.. + +* Ethernet controller node + +Required properties: +- compatible: Should be "mediatek,mt7623-eth" +- reg: Address and length of the register set for the device +- interrupts: Should contain the frame engines interrupt +- clocks: the clock used by the core +- clock-names: the names of the clock listed in the clocks property. These are + "ethif", "esw", "gp2", "gp1" +- power-domains: phandle to the power domain that the ethernet is part of +- resets: Should contain a phandle to the ethsys reset signal +- reset-names: Should contain the reset signal name "eth" +- mediatek,ethsys: phandle to the syscon node that handles the port setup +- mediatek,pctl: phandle to the syscon node that handles the ports slew rate + and driver current + +Optional properties: +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device + + +* Ethernet MAC node + +Required properties: +- compatible: Should be "mediatek,eth-mac" +- reg: The number of the MAC +- phy-handle: see ethernet.txt file in the same directory. + +Example: + +eth: ethernet@1b100000 { + compatible = "mediatek,mt7623-eth"; + reg = <0 0x1b100000 0 0x20000>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <ðsys CLK_ETHSYS_ESW>, + <ðsys CLK_ETHSYS_GP2>, + <ðsys CLK_ETHSYS_GP1>; + clock-names = "ethif", "esw", "gp2", "gp1"; + interrupts = ; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + resets = <ðsys MT2701_ETHSYS_ETH_RST>; + reset-names = "eth"; + mediatek,ethsys = <ðsys>; + mediatek,pctl = <&syscfg_pctl_a>; + #address-cells = <1>; + #size-cells = <0>; + + gmac1: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-handle = <&phy0>; + }; + + gmac2: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy1>; + }; + + mdio-bus { + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + }; +}; -- 1.7.10.4