From 09f0b50ae838bd6e2bbf0aa22de9f352122297de Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 22 Apr 2016 11:06:03 +0200 Subject: [PATCH 079/102] net-next: mediatek: add fixed-phy support The MT7623 SoC has a builtin gigabit switch. If we want to use it, GMAC1 needs to be configured using a fixed link speed and flow control settings. The easiest way to do this is to used the fixed-phy driver, allowing us to reuse the existing mdio polling code to setup the MAC. Reviewed-by: Andrew Lunn Signed-off-by: John Crispin --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 3436c7b..ab61789 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -229,6 +229,9 @@ static int mtk_phy_connect(struct mtk_mac *mac) u32 val, ge_mode; np = of_parse_phandle(mac->of_node, "phy-handle", 0); + if (!np && of_phy_is_fixed_link(mac->of_node)) + if (!of_phy_register_fixed_link(mac->of_node)) + np = of_node_get(mac->of_node); if (!np) return -ENODEV; @@ -257,6 +260,9 @@ static int mtk_phy_connect(struct mtk_mac *mac) mac->phy_dev->autoneg = AUTONEG_ENABLE; mac->phy_dev->speed = 0; mac->phy_dev->duplex = 0; + if (of_phy_is_fixed_link(mac->of_node)) + mac->phy_dev->supported |= SUPPORTED_Pause | + SUPPORTED_Asym_Pause; mac->phy_dev->supported &= PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause; mac->phy_dev->advertising = mac->phy_dev->supported | -- 1.7.10.4