// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "cn71xx.dtsi" #include #include / { compatible = "ubnt,edgerouter-e300", "cavium,cn7130"; model = "Ubiquiti EdgeRouter E300 series"; aliases { /* White + Blinking Blue */ led-boot = &led_power_white; /* Blue + Blinking White */ led-failsafe = &led_power_blue; /* Constant Blue */ led-running = &led_power_blue; /* Blue + Blinking White */ led-upgrade = &led_power_blue; }; memory@0 { device_type = "memory"; reg = <0x0 0x00000000>, <0x0 0x10000000>, <0x0 0x20000000>, <0x0 0x30000000>; }; leds { compatible = "gpio-leds"; led_power_blue: power_blue { label = "blue:power"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; led_power_white: power_white { label = "white:power"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys-polled"; poll-interval = <20>; reset { label = "reset"; linux,code = ; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; sfp: sfp { compatible = "sff,sfp"; i2c-bus = <&twsi0>; /* Pins 12, 13 and 14 gets pulled low when SFP is plugged in */ mod-def0-gpio = <&gpio 12 GPIO_ACTIVE_LOW>; }; }; &uart0 { status = "okay"; }; &usb0 { status = "okay"; }; &xhci0 { status = "okay"; dr_mode = "host"; }; &twsi0 { status = "okay"; sfp_eeprom@50 { compatible = "at,24c04"; reg = <0x50>; }; sfp_eeprom@51 { compatible = "at,24c04"; reg = <0x51>; }; }; &spi { status = "okay"; flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "Macronix,mx25l6405d", "spi-flash"; reg = <0>; spi-max-frequency = <25000000>; partition@0 { label = "boot0"; read-only; reg = <0x000000 0x300000>; }; partition@300000 { label = "dummy"; read-only; reg = <0x300000 0x100000>; }; eeprom: partition@400000 { label = "eeprom"; read-only; reg = <0x400000 0x10000>; }; }; }; &mmc { status = "okay"; mmc-slot@0 { compatible = "mmc-slot"; reg = <0>; non-removable; max-frequency = <26000000>; voltage-ranges = <3300 3300>; bus-width = <8>; }; }; &smi0 { status = "okay"; phy4: ethernet-phy@4 { device_type = "ethernet-phy"; interrupts = <17 8>; interrupt-parent = <&gpio>; compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; reg = <4>; sfp = <&sfp>; }; phy5: ethernet-phy@5 { device_type = "ethernet-phy"; interrupts = <17 8>; interrupt-parent = <&gpio>; compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; reg = <5>; }; phy6: ethernet-phy@6 { device_type = "ethernet-phy"; interrupts = <17 8>; interrupt-parent = <&gpio>; compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; reg = <6>; }; phy7: ethernet-phy@7 { device_type = "ethernet-phy"; interrupts = <17 8>; interrupt-parent = <&gpio>; compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; reg = <7>; }; }; &pip { status = "okay"; interface@0 { status = "okay"; ethernet@1 { label = "lan0"; status = "okay"; phy-mode = "sgmii"; phy-handle = <&phy5>; mtd-mac-address = <&eeprom 0>; mac-address-increment = <(1)>; }; ethernet@2 { label = "lan1"; status = "okay"; phy-mode = "sgmii"; phy-handle = <&phy6>; mtd-mac-address = <&eeprom 0>; mac-address-increment = <(2)>; }; ethernet@3 { label = "lan2"; status = "okay"; phy-mode = "sgmii"; phy-handle = <&phy7>; mtd-mac-address = <&eeprom 0>; mac-address-increment = <(3)>; }; }; };