From ded577553b06a85c12a89b8fbcfa2b51f30bc037 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sat, 18 May 2013 22:06:15 +0200 Subject: [PATCH 13/33] PCI: MIPS: adds mt7620a pcie driver Signed-off-by: John Crispin --- arch/mips/pci/Makefile | 1 + arch/mips/pci/pci-mt7620a.c | 363 +++++++++++++++++++++++++++++++++++++++++++ arch/mips/ralink/Kconfig | 1 + 3 files changed, 365 insertions(+) create mode 100644 arch/mips/pci/pci-mt7620a.c diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 3cbfd9b..025d3a7 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o +obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o diff --git a/arch/mips/pci/pci-mt7620a.c b/arch/mips/pci/pci-mt7620a.c new file mode 100644 index 0000000..271763c --- /dev/null +++ b/arch/mips/pci/pci-mt7620a.c @@ -0,0 +1,363 @@ +/* + * Ralink MT7620A SoC PCI support + * + * Copyright (C) 2007-2013 Bruce Chang + * Copyright (C) 2013 John Crispin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define RALINK_PCI_MM_MAP_BASE 0x20000000 +#define RALINK_PCI_IO_MAP_BASE 0x10160000 + +#define RALINK_INT_PCIE0 4 +#define RALINK_SYSTEM_CONTROL_BASE 0xb0000000 +#define RALINK_SYSCFG1 0x14 +#define RALINK_CLKCFG1 0x30 +#define RALINK_GPIOMODE 0x60 +#define RALINK_PCIE_CLK_GEN 0x7c +#define RALINK_PCIE_CLK_GEN1 0x80 +#define PCIEPHY0_CFG 0x90 +#define PPLL_CFG1 0x9c +#define PPLL_DRV 0xa0 +#define RALINK_PCI_HOST_MODE_EN (1<<7) +#define RALINK_PCIE_RC_MODE_EN (1<<8) +#define RALINK_PCIE_RST (1<<23) +#define RALINK_PCI_RST (1<<24) +#define RALINK_PCI_CLK_EN (1<<19) +#define RALINK_PCIE_CLK_EN (1<<21) +#define PCI_SLOTx2 (1<<11) +#define PCI_SLOTx1 (2<<11) +#define PDRV_SW_SET (1<<31) +#define LC_CKDRVPD_ (1<<19) + +#define RALINK_PCI_CONFIG_ADDR 0x20 +#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24 +#define MEMORY_BASE 0x0 +#define RALINK_PCIE0_RST (1<<26) +#define RALINK_PCI_BASE 0xB0140000 +#define RALINK_PCI_MEMBASE 0x28 +#define RALINK_PCI_IOBASE 0x2C + +#define RT6855_PCIE0_OFFSET 0x2000 + +#define RALINK_PCI_PCICFG_ADDR 0x00 +#define RALINK_PCI0_BAR0SETUP_ADDR 0x10 +#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18 +#define RALINK_PCI0_ID 0x30 +#define RALINK_PCI0_CLASS 0x34 +#define RALINK_PCI0_SUBID 0x38 +#define RALINK_PCI0_STATUS 0x50 +#define RALINK_PCI_PCIMSK_ADDR 0x0C + +#define RALINK_PCIE0_CLK_EN (1 << 26) + +#define BUSY 0x80000000 +#define WAITRETRY_MAX 10 +#define WRITE_MODE (1UL << 23) +#define DATA_SHIFT 0 +#define ADDR_SHIFT 8 + + +static void __iomem *bridge_base; +static void __iomem *pcie_base; + +static struct reset_control *rstpcie0; + +static inline void bridge_w32(u32 val, unsigned reg) +{ + iowrite32(val, bridge_base + reg); +} + +static inline u32 bridge_r32(unsigned reg) +{ + return ioread32(bridge_base + reg); +} + +static inline void pcie_w32(u32 val, unsigned reg) +{ + iowrite32(val, pcie_base + reg); +} + +static inline u32 pcie_r32(unsigned reg) +{ + return ioread32(pcie_base + reg); +} + +static inline void pcie_m32(u32 clr, u32 set, unsigned reg) +{ + u32 val = pcie_r32(reg); + val &= ~clr; + val |= set; + pcie_w32(val, reg); +} + +int wait_pciephy_busy(void) +{ + unsigned long reg_value = 0x0, retry = 0; + + while (1) { + //reg_value = rareg(READMODE, PCIEPHY0_CFG, 0); + reg_value = pcie_r32(PCIEPHY0_CFG); + + if (reg_value & BUSY) + mdelay(100); + else + break; + if (retry++ > WAITRETRY_MAX){ + printk("PCIE-PHY retry failed.\n"); + return -1; + } + } + return 0; +} + +static void pcie_phy(unsigned long addr, unsigned long val) +{ + wait_pciephy_busy(); + pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG); + mdelay(1); + wait_pciephy_busy(); +} + +static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) +{ + unsigned int slot = PCI_SLOT(devfn); + u8 func = PCI_FUNC(devfn); + u32 address; + u32 data; + + address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; + bridge_w32(address, RALINK_PCI_CONFIG_ADDR); + data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG); + + switch (size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + *val = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + *val = data; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) +{ + unsigned int slot = PCI_SLOT(devfn); + u8 func = PCI_FUNC(devfn); + u32 address; + u32 data; + + address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; + bridge_w32(address, RALINK_PCI_CONFIG_ADDR); + data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG); + + switch (size) { + case 1: + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 2: + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 4: + data = val; + break; + } + + bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRTUAL_REG); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops mt7620a_pci_ops= { + .read = pci_config_read, + .write = pci_config_write, +}; + +static struct resource mt7620a_res_pci_mem1 = { + .name = "pci memory", + .start = RALINK_PCI_MM_MAP_BASE, + .end = (u32) ((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)), + .flags = IORESOURCE_MEM, +}; +static struct resource mt7620a_res_pci_io1 = { + .name = "pci io", + .start = RALINK_PCI_IO_MAP_BASE, + .end = (u32) ((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)), + .flags = IORESOURCE_IO, +}; + +struct pci_controller mt7620a_controller = { + .pci_ops = &mt7620a_pci_ops, + .mem_resource = &mt7620a_res_pci_mem1, + .io_resource = &mt7620a_res_pci_io1, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, + .io_map_base = 0xa0000000, +}; + +static int mt7620a_pci_probe(struct platform_device *pdev) +{ + struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + + rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0"); + if (IS_ERR(rstpcie0)) + return PTR_ERR(rstpcie0); + + bridge_base = devm_request_and_ioremap(&pdev->dev, bridge_res); + if (!bridge_base) + return -ENOMEM; + + pcie_base = devm_request_and_ioremap(&pdev->dev, pcie_res); + if (!pcie_base) + return -ENOMEM; + + iomem_resource.start = 0; + iomem_resource.end= ~0; + ioport_resource.start= 0; + ioport_resource.end = ~0; + + /* PCIE: bypass PCIe DLL */ + pcie_phy(0x0, 0x80); + pcie_phy(0x1, 0x04); + /* PCIE: Elastic buffer control */ + pcie_phy(0x68, 0xB4); + + reset_control_assert(rstpcie0); + rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); + rt_sysc_m32(1<<19, 1<<31, PPLL_DRV); + rt_sysc_m32(0x3 << 16, 0, RALINK_GPIOMODE); + + reset_control_deassert(rstpcie0); + rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1); + + mdelay(100); + + if (!(rt_sysc_r32(PPLL_CFG1) & 1<<23)) { + printk("MT7620 PPLL unlock\n"); + reset_control_assert(rstpcie0); + rt_sysc_m32(BIT(26), 0, RALINK_CLKCFG1); + return 0; + } + rt_sysc_m32((0x1<<18) | (0x1<<17), (0x1 << 19) | (0x1 << 31), PPLL_DRV); + + mdelay(100); + reset_control_assert(rstpcie0); + rt_sysc_m32(0x30, 2 << 4, RALINK_SYSCFG1); + + rt_sysc_m32(~0x7fffffff, 0x80000000, RALINK_PCIE_CLK_GEN); + rt_sysc_m32(~0x80ffffff, 0xa << 24, RALINK_PCIE_CLK_GEN1); + + mdelay(50); + reset_control_deassert(rstpcie0); + pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR); + mdelay(100); + + if (( pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) { + reset_control_assert(rstpcie0); + rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); + rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV); + printk("PCIE0 no card, disable it(RST&CLK)\n"); + } + + bridge_w32(0xffffffff, RALINK_PCI_MEMBASE); + bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE); + + pcie_w32(0x7FFF0000, RALINK_PCI0_BAR0SETUP_ADDR); + pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR); + pcie_w32(0x08021814, RALINK_PCI0_ID); + pcie_w32(0x06040001, RALINK_PCI0_CLASS); + pcie_w32(0x28801814, RALINK_PCI0_SUBID); + pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR); + + register_pci_controller(&mt7620a_controller); + + return 0; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + const struct resource *res; + u16 cmd; + u32 val; + int i, irq = 0; + + if ((dev->bus->number == 0) && (slot == 0)) { + pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE + pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE); + pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val); + } else if ((dev->bus->number == 1) && (slot == 0x0)) { + irq = RALINK_INT_PCIE0; + } else { + printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot); + return 0; + } + + for (i = 0; i < 6; i++) { + res = &dev->resource[i]; + } + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14 + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10 + pci_read_config_word(dev, PCI_COMMAND, &cmd); + + // FIXME + cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, cmd); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + //pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq); + + return irq; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +static const struct of_device_id mt7620a_pci_ids[] = { + { .compatible = "ralink,mt7620a-pci" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mt7620a_pci_ids); + +static struct platform_driver mt7620a_pci_driver = { + .probe = mt7620a_pci_probe, + .driver = { + .name = "mt7620a-pci", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mt7620a_pci_ids), + }, +}; + +static int __init mt7620a_pci_init(void) +{ + return platform_driver_register(&mt7620a_pci_driver); +} + +arch_initcall(mt7620a_pci_init); diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig index 592e5f9..992e365 100644 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -24,6 +24,7 @@ choice config SOC_MT7620 bool "MT7620" + select HW_HAS_PCI endchoice -- 1.7.10.4