From 00942d1a1bd93ac108c1b92d504c568a37be1833 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 17 Jan 2014 10:58:49 -0300 Subject: [PATCH] [media] media: rc: add sysfs scancode filtering interface Add and document a generic sysfs based scancode filtering interface for making use of IR data matching hardware to filter out uninteresting scancodes. Two filters exist, one for normal operation and one for filtering scancodes which are permitted to wake the system from suspend. The following files are added to /sys/class/rc/rc?/: - filter: normal scancode filter value - filter_mask: normal scancode filter mask - wakeup_filter: wakeup scancode filter value - wakeup_filter_mask: wakeup scancode filter mask A new s_filter() driver callback is added which must arrange for the specified filter to be applied at the right time. Drivers can convert the scancode filter into a raw IR data filter, which can be applied immediately or later (for wake up filters). Signed-off-by: James Hogan Cc: Mauro Carvalho Chehab Cc: linux-media@vger.kernel.org Cc: Rob Landley Cc: linux-doc@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- Documentation/ABI/testing/sysfs-class-rc | 58 +++++++++++++ drivers/media/rc/rc-main.c | 136 +++++++++++++++++++++++++++++++ include/media/rc-core.h | 29 +++++++ 3 files changed, 223 insertions(+) From 7b802ce7e8c67510389fdbbe29edd87a75df3a93 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Mon, 10 Feb 2014 18:31:56 -0300 Subject: [PATCH] [media] rc-main: store_filter: pass errors to userland MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Propagate errors returned by drivers from the s_filter callback back to userland when updating scancode filters. This allows userland to see when the filter couldn't be updated, usually because it's not a valid filter for the hardware. Previously the filter was being updated conditionally on success of s_filter, but the write always reported success back to userland. Reported-by: Antti Seppälä Signed-off-by: James Hogan Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) From b8c7d915087c97a21fa415fa0e860e59739da202 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 28 Feb 2014 20:17:02 -0300 Subject: [PATCH] [media] rc-main: add generic scancode filtering MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add generic scancode filtering of RC input events, and fall back to permitting any RC_FILTER_NORMAL scancode filter to be set if no s_filter callback exists. This allows raw IR decoder events to be filtered, and potentially allows hardware decoders to set looser filters and rely on generic code to filter out the corner cases. Signed-off-by: James Hogan Reviewed-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-main.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) From 1a1934fab0c920f0d3bceeb60c9fe2dae8a56be9 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 28 Feb 2014 20:17:03 -0300 Subject: [PATCH] [media] rc: abstract access to allowed/enabled protocols MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The allowed and enabled protocol masks need to be expanded to be per filter type in order to support wakeup filter protocol selection. To ease that process abstract access to the rc_dev::allowed_protos and rc_dev::enabled_protocols members with inline functions. Signed-off-by: James Hogan Reviewed-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab --- drivers/hid/hid-picolcd_cir.c | 2 +- drivers/media/common/siano/smsir.c | 2 +- drivers/media/i2c/ir-kbd-i2c.c | 4 ++-- drivers/media/pci/cx23885/cx23885-input.c | 2 +- drivers/media/pci/cx88/cx88-input.c | 2 +- drivers/media/rc/ati_remote.c | 2 +- drivers/media/rc/ene_ir.c | 2 +- drivers/media/rc/fintek-cir.c | 2 +- drivers/media/rc/gpio-ir-recv.c | 4 ++-- drivers/media/rc/iguanair.c | 2 +- drivers/media/rc/imon.c | 7 ++++--- drivers/media/rc/ir-jvc-decoder.c | 2 +- drivers/media/rc/ir-lirc-codec.c | 2 +- drivers/media/rc/ir-mce_kbd-decoder.c | 2 +- drivers/media/rc/ir-nec-decoder.c | 2 +- drivers/media/rc/ir-raw.c | 2 +- drivers/media/rc/ir-rc5-decoder.c | 6 +++--- drivers/media/rc/ir-rc5-sz-decoder.c | 2 +- drivers/media/rc/ir-rc6-decoder.c | 6 +++--- drivers/media/rc/ir-sanyo-decoder.c | 2 +- drivers/media/rc/ir-sharp-decoder.c | 2 +- drivers/media/rc/ir-sony-decoder.c | 10 +++++----- drivers/media/rc/ite-cir.c | 2 +- drivers/media/rc/mceusb.c | 2 +- drivers/media/rc/nuvoton-cir.c | 2 +- drivers/media/rc/rc-loopback.c | 2 +- drivers/media/rc/redrat3.c | 2 +- drivers/media/rc/st_rc.c | 2 +- drivers/media/rc/streamzap.c | 2 +- drivers/media/rc/ttusbir.c | 2 +- drivers/media/rc/winbond-cir.c | 2 +- drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 2 +- drivers/media/usb/dvb-usb/dvb-usb-remote.c | 2 +- drivers/media/usb/em28xx/em28xx-input.c | 8 ++++---- drivers/media/usb/tm6000/tm6000-input.c | 2 +- include/media/rc-core.h | 22 ++++++++++++++++++++++ 36 files changed, 73 insertions(+), 50 deletions(-) From acff5f24732acc8a55d0a0f0ee1d19442267df63 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 28 Feb 2014 20:17:04 -0300 Subject: [PATCH] [media] rc: add allowed/enabled wakeup protocol masks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only a single allowed and enabled protocol mask currently exists in struct rc_dev, however to support a separate wakeup filter protocol two of each are needed, ideally as an array. Therefore make both rc_dev::allowed_protos and rc_dev::enabled_protocols arrays, update all users to reference the first element (RC_FILTER_NORMAL), and add a couple more helper functions for drivers to use for setting the allowed and enabled wakeup protocols. We also rename allowed_protos to allowed_protocols while we're at it, which is more consistent with enabled_protocols. Signed-off-by: James Hogan Reviewed-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-main.c | 10 +++++----- include/media/rc-core.h | 32 ++++++++++++++++++++++++-------- 2 files changed, 29 insertions(+), 13 deletions(-) From ab88c66deace78989aa71cb139284cf7fb227ba4 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 28 Feb 2014 20:17:05 -0300 Subject: [PATCH] [media] rc: add wakeup_protocols sysfs file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a wakeup_protocols sysfs file which controls the new rc_dev::enabled_protocols[RC_FILTER_WAKEUP], which is the mask of protocols that are used for the wakeup filter. A new RC driver callback change_wakeup_protocol() is called to change the wakeup protocol mask. Signed-off-by: James Hogan Reviewed-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab --- Documentation/ABI/testing/sysfs-class-rc | 23 +++++- .../DocBook/media/v4l/remote_controllers.xml | 20 +++++- drivers/media/rc/rc-main.c | 82 +++++++++++++--------- include/media/rc-core.h | 3 + 4 files changed, 90 insertions(+), 38 deletions(-) From 6bea25af147fcddcd8fd4557f4184c847c5c6ffd Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 28 Feb 2014 20:17:06 -0300 Subject: [PATCH] [media] rc-main: automatically refresh filter on protocol change MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When either of the normal or wakeup filter protocols are changed, refresh the corresponding scancode filter, i.e. try and set the same scancode filter with the new protocol. If that fails clear the filter instead. If no protocol was selected the filter is just cleared, and if no s_filter callback exists the filter is left unmodified. Similarly clear the filter mask when the filter is set if no protocol is currently selected. This simplifies driver code which no longer has to explicitly worry about modifying the filter on a protocol change. This also allows the change_wakeup_protocol callback to be omitted entirely if there is only a single available wakeup protocol at a time, since selecting no protocol will automatically clear the wakeup filter, disabling wakeup. Signed-off-by: James Hogan Reviewed-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-main.c | 41 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 39 insertions(+), 2 deletions(-) From 262912335c823a2bbcc87003ee55d62cc27f4e48 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Sat, 1 Mar 2014 19:52:25 -0300 Subject: [PATCH] [media] rc-main: fix missing unlock if no devno left While playing with make coccicheck I noticed this message: drivers/media/rc/rc-main.c:1245:3-9: preceding lock on line 1238 It was introduced by commit 587d1b06e07b ([media] rc-core: reuse device numbers) which returns -ENOMEM after a mutex_lock without first unlocking it when there are no more device numbers left. The added code doesn't depend on the device lock, so move it before the lock is taken. Signed-off-by: James Hogan Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-main.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) --- a/drivers/hid/hid-picolcd_cir.c +++ b/drivers/hid/hid-picolcd_cir.c @@ -114,7 +114,7 @@ int picolcd_init_cir(struct picolcd_data rdev->priv = data; rdev->driver_type = RC_DRIVER_IR_RAW; - rdev->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rdev, RC_BIT_ALL); rdev->open = picolcd_cir_open; rdev->close = picolcd_cir_close; rdev->input_name = data->hdev->name; --- a/drivers/media/common/siano/smsir.c +++ b/drivers/media/common/siano/smsir.c @@ -88,7 +88,7 @@ int sms_ir_init(struct smscore_device_t dev->priv = coredev; dev->driver_type = RC_DRIVER_IR_RAW; - dev->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(dev, RC_BIT_ALL); dev->map_name = sms_get_board(board_id)->rc_codes; dev->driver_name = MODULE_NAME; --- a/drivers/media/i2c/ir-kbd-i2c.c +++ b/drivers/media/i2c/ir-kbd-i2c.c @@ -431,8 +431,8 @@ static int ir_probe(struct i2c_client *c * Initialize the other fields of rc_dev */ rc->map_name = ir->ir_codes; - rc->allowed_protos = rc_type; - rc->enabled_protocols = rc_type; + rc_set_allowed_protocols(rc, rc_type); + rc_set_enabled_protocols(rc, rc_type); if (!rc->driver_name) rc->driver_name = MODULE_NAME; --- a/drivers/media/pci/cx23885/cx23885-input.c +++ b/drivers/media/pci/cx23885/cx23885-input.c @@ -346,7 +346,7 @@ int cx23885_input_init(struct cx23885_de } rc->dev.parent = &dev->pci->dev; rc->driver_type = driver_type; - rc->allowed_protos = allowed_protos; + rc_set_allowed_protocols(rc, allowed_protos); rc->priv = kernel_ir; rc->open = cx23885_input_ir_open; rc->close = cx23885_input_ir_close; --- a/drivers/media/pci/cx88/cx88-input.c +++ b/drivers/media/pci/cx88/cx88-input.c @@ -469,7 +469,7 @@ int cx88_ir_init(struct cx88_core *core, dev->timeout = 10 * 1000 * 1000; /* 10 ms */ } else { dev->driver_type = RC_DRIVER_SCANCODE; - dev->allowed_protos = rc_type; + rc_set_allowed_protocols(dev, rc_type); } ir->core = core; --- a/drivers/media/rc/ati_remote.c +++ b/drivers/media/rc/ati_remote.c @@ -784,7 +784,7 @@ static void ati_remote_rc_init(struct at rdev->priv = ati_remote; rdev->driver_type = RC_DRIVER_SCANCODE; - rdev->allowed_protos = RC_BIT_OTHER; + rc_set_allowed_protocols(rdev, RC_BIT_OTHER); rdev->driver_name = "ati_remote"; rdev->open = ati_remote_rc_open; --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -1059,7 +1059,7 @@ static int ene_probe(struct pnp_dev *pnp learning_mode_force = false; rdev->driver_type = RC_DRIVER_IR_RAW; - rdev->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rdev, RC_BIT_ALL); rdev->priv = dev; rdev->open = ene_open; rdev->close = ene_close; --- a/drivers/media/rc/fintek-cir.c +++ b/drivers/media/rc/fintek-cir.c @@ -541,7 +541,7 @@ static int fintek_probe(struct pnp_dev * /* Set up the rc device */ rdev->priv = fintek; rdev->driver_type = RC_DRIVER_IR_RAW; - rdev->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rdev, RC_BIT_ALL); rdev->open = fintek_open; rdev->close = fintek_close; rdev->input_name = FINTEK_DESCRIPTION; --- a/drivers/media/rc/gpio-ir-recv.c +++ b/drivers/media/rc/gpio-ir-recv.c @@ -145,9 +145,9 @@ static int gpio_ir_recv_probe(struct pla rcdev->dev.parent = &pdev->dev; rcdev->driver_name = GPIO_IR_DRIVER_NAME; if (pdata->allowed_protos) - rcdev->allowed_protos = pdata->allowed_protos; + rc_set_allowed_protocols(rcdev, pdata->allowed_protos); else - rcdev->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rcdev, RC_BIT_ALL); rcdev->map_name = pdata->map_name ?: RC_MAP_EMPTY; gpio_dev->rcdev = rcdev; --- a/drivers/media/rc/iguanair.c +++ b/drivers/media/rc/iguanair.c @@ -494,7 +494,7 @@ static int iguanair_probe(struct usb_int usb_to_input_id(ir->udev, &rc->input_id); rc->dev.parent = &intf->dev; rc->driver_type = RC_DRIVER_IR_RAW; - rc->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rc, RC_BIT_ALL); rc->priv = ir; rc->open = iguanair_open; rc->close = iguanair_close; --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1017,7 +1017,7 @@ static int imon_ir_change_protocol(struc unsigned char ir_proto_packet[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 }; - if (*rc_type && !(*rc_type & rc->allowed_protos)) + if (*rc_type && !rc_protocols_allowed(rc, *rc_type)) dev_warn(dev, "Looks like you're trying to use an IR protocol " "this device does not support\n"); @@ -1867,7 +1867,8 @@ static struct rc_dev *imon_init_rdev(str rdev->priv = ictx; rdev->driver_type = RC_DRIVER_SCANCODE; - rdev->allowed_protos = RC_BIT_OTHER | RC_BIT_RC6_MCE; /* iMON PAD or MCE */ + /* iMON PAD or MCE */ + rc_set_allowed_protocols(rdev, RC_BIT_OTHER | RC_BIT_RC6_MCE); rdev->change_protocol = imon_ir_change_protocol; rdev->driver_name = MOD_NAME; @@ -1880,7 +1881,7 @@ static struct rc_dev *imon_init_rdev(str if (ictx->product == 0xffdc) { imon_get_ffdc_type(ictx); - rdev->allowed_protos = ictx->rc_type; + rc_set_allowed_protocols(rdev, ictx->rc_type); } imon_set_display_type(ictx); --- a/drivers/media/rc/ir-jvc-decoder.c +++ b/drivers/media/rc/ir-jvc-decoder.c @@ -47,7 +47,7 @@ static int ir_jvc_decode(struct rc_dev * { struct jvc_dec *data = &dev->raw->jvc; - if (!(dev->enabled_protocols & RC_BIT_JVC)) + if (!rc_protocols_enabled(dev, RC_BIT_JVC)) return 0; if (!is_timing_event(ev)) { --- a/drivers/media/rc/ir-lirc-codec.c +++ b/drivers/media/rc/ir-lirc-codec.c @@ -35,7 +35,7 @@ static int ir_lirc_decode(struct rc_dev struct lirc_codec *lirc = &dev->raw->lirc; int sample; - if (!(dev->enabled_protocols & RC_BIT_LIRC)) + if (!rc_protocols_enabled(dev, RC_BIT_LIRC)) return 0; if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf) --- a/drivers/media/rc/ir-mce_kbd-decoder.c +++ b/drivers/media/rc/ir-mce_kbd-decoder.c @@ -216,7 +216,7 @@ static int ir_mce_kbd_decode(struct rc_d u32 scancode; unsigned long delay; - if (!(dev->enabled_protocols & RC_BIT_MCE_KBD)) + if (!rc_protocols_enabled(dev, RC_BIT_MCE_KBD)) return 0; if (!is_timing_event(ev)) { --- a/drivers/media/rc/ir-nec-decoder.c +++ b/drivers/media/rc/ir-nec-decoder.c @@ -52,7 +52,7 @@ static int ir_nec_decode(struct rc_dev * u8 address, not_address, command, not_command; bool send_32bits = false; - if (!(dev->enabled_protocols & RC_BIT_NEC)) + if (!rc_protocols_enabled(dev, RC_BIT_NEC)) return 0; if (!is_timing_event(ev)) { --- a/drivers/media/rc/ir-raw.c +++ b/drivers/media/rc/ir-raw.c @@ -256,7 +256,7 @@ int ir_raw_event_register(struct rc_dev return -ENOMEM; dev->raw->dev = dev; - dev->enabled_protocols = ~0; + rc_set_enabled_protocols(dev, ~0); rc = kfifo_alloc(&dev->raw->kfifo, sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE, GFP_KERNEL); --- a/drivers/media/rc/ir-rc5-decoder.c +++ b/drivers/media/rc/ir-rc5-decoder.c @@ -52,7 +52,7 @@ static int ir_rc5_decode(struct rc_dev * u8 toggle; u32 scancode; - if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X))) + if (!rc_protocols_enabled(dev, RC_BIT_RC5 | RC_BIT_RC5X)) return 0; if (!is_timing_event(ev)) { @@ -128,7 +128,7 @@ again: if (data->wanted_bits == RC5X_NBITS) { /* RC5X */ u8 xdata, command, system; - if (!(dev->enabled_protocols & RC_BIT_RC5X)) { + if (!rc_protocols_enabled(dev, RC_BIT_RC5X)) { data->state = STATE_INACTIVE; return 0; } @@ -145,7 +145,7 @@ again: } else { /* RC5 */ u8 command, system; - if (!(dev->enabled_protocols & RC_BIT_RC5)) { + if (!rc_protocols_enabled(dev, RC_BIT_RC5)) { data->state = STATE_INACTIVE; return 0; } --- a/drivers/media/rc/ir-rc5-sz-decoder.c +++ b/drivers/media/rc/ir-rc5-sz-decoder.c @@ -48,7 +48,7 @@ static int ir_rc5_sz_decode(struct rc_de u8 toggle, command, system; u32 scancode; - if (!(dev->enabled_protocols & RC_BIT_RC5_SZ)) + if (!rc_protocols_enabled(dev, RC_BIT_RC5_SZ)) return 0; if (!is_timing_event(ev)) { --- a/drivers/media/rc/ir-rc6-decoder.c +++ b/drivers/media/rc/ir-rc6-decoder.c @@ -89,9 +89,9 @@ static int ir_rc6_decode(struct rc_dev * u32 scancode; u8 toggle; - if (!(dev->enabled_protocols & - (RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 | - RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE))) + if (!rc_protocols_enabled(dev, RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | + RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 | + RC_BIT_RC6_MCE)) return 0; if (!is_timing_event(ev)) { --- a/drivers/media/rc/ir-sanyo-decoder.c +++ b/drivers/media/rc/ir-sanyo-decoder.c @@ -58,7 +58,7 @@ static int ir_sanyo_decode(struct rc_dev u32 scancode; u8 address, command, not_command; - if (!(dev->enabled_protocols & RC_BIT_SANYO)) + if (!rc_protocols_enabled(dev, RC_BIT_SANYO)) return 0; if (!is_timing_event(ev)) { --- a/drivers/media/rc/ir-sony-decoder.c +++ b/drivers/media/rc/ir-sony-decoder.c @@ -45,8 +45,8 @@ static int ir_sony_decode(struct rc_dev u32 scancode; u8 device, subdevice, function; - if (!(dev->enabled_protocols & - (RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20))) + if (!rc_protocols_enabled(dev, RC_BIT_SONY12 | RC_BIT_SONY15 | + RC_BIT_SONY20)) return 0; if (!is_timing_event(ev)) { @@ -124,7 +124,7 @@ static int ir_sony_decode(struct rc_dev switch (data->count) { case 12: - if (!(dev->enabled_protocols & RC_BIT_SONY12)) { + if (!rc_protocols_enabled(dev, RC_BIT_SONY12)) { data->state = STATE_INACTIVE; return 0; } @@ -133,7 +133,7 @@ static int ir_sony_decode(struct rc_dev function = bitrev8((data->bits >> 4) & 0xFE); break; case 15: - if (!(dev->enabled_protocols & RC_BIT_SONY15)) { + if (!rc_protocols_enabled(dev, RC_BIT_SONY15)) { data->state = STATE_INACTIVE; return 0; } @@ -142,7 +142,7 @@ static int ir_sony_decode(struct rc_dev function = bitrev8((data->bits >> 7) & 0xFE); break; case 20: - if (!(dev->enabled_protocols & RC_BIT_SONY20)) { + if (!rc_protocols_enabled(dev, RC_BIT_SONY20)) { data->state = STATE_INACTIVE; return 0; } --- a/drivers/media/rc/ite-cir.c +++ b/drivers/media/rc/ite-cir.c @@ -1563,7 +1563,7 @@ static int ite_probe(struct pnp_dev *pde /* set up ir-core props */ rdev->priv = itdev; rdev->driver_type = RC_DRIVER_IR_RAW; - rdev->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rdev, RC_BIT_ALL); rdev->open = ite_open; rdev->close = ite_close; rdev->s_idle = ite_s_idle; --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -1217,7 +1217,7 @@ static struct rc_dev *mceusb_init_rc_dev rc->dev.parent = dev; rc->priv = ir; rc->driver_type = RC_DRIVER_IR_RAW; - rc->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rc, RC_BIT_ALL); rc->timeout = MS_TO_NS(100); if (!ir->flags.no_tx) { rc->s_tx_mask = mceusb_set_tx_mask; --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -1042,7 +1042,7 @@ static int nvt_probe(struct pnp_dev *pde /* Set up the rc device */ rdev->priv = nvt; rdev->driver_type = RC_DRIVER_IR_RAW; - rdev->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rdev, RC_BIT_ALL); rdev->open = nvt_open; rdev->close = nvt_close; rdev->tx_ir = nvt_tx_ir; --- a/drivers/media/rc/rc-loopback.c +++ b/drivers/media/rc/rc-loopback.c @@ -195,7 +195,7 @@ static int __init loop_init(void) rc->map_name = RC_MAP_EMPTY; rc->priv = &loopdev; rc->driver_type = RC_DRIVER_IR_RAW; - rc->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rc, RC_BIT_ALL); rc->timeout = 100 * 1000 * 1000; /* 100 ms */ rc->min_timeout = 1; rc->max_timeout = UINT_MAX; --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -633,6 +633,7 @@ EXPORT_SYMBOL_GPL(rc_repeat); static void ir_do_keydown(struct rc_dev *dev, int scancode, u32 keycode, u8 toggle) { + struct rc_scancode_filter *filter; bool new_event = !dev->keypressed || dev->last_scancode != scancode || dev->last_toggle != toggle; @@ -640,6 +641,11 @@ static void ir_do_keydown(struct rc_dev if (new_event && dev->keypressed) ir_do_keyup(dev, false); + /* Generic scancode filtering */ + filter = &dev->scancode_filters[RC_FILTER_NORMAL]; + if (filter->mask && ((scancode ^ filter->data) & filter->mask)) + return; + input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode); if (new_event && keycode != KEY_RESERVED) { @@ -795,13 +801,38 @@ static struct { }; /** - * show_protocols() - shows the current IR protocol(s) + * struct rc_filter_attribute - Device attribute relating to a filter type. + * @attr: Device attribute. + * @type: Filter type. + * @mask: false for filter value, true for filter mask. + */ +struct rc_filter_attribute { + struct device_attribute attr; + enum rc_filter_type type; + bool mask; +}; +#define to_rc_filter_attr(a) container_of(a, struct rc_filter_attribute, attr) + +#define RC_PROTO_ATTR(_name, _mode, _show, _store, _type) \ + struct rc_filter_attribute dev_attr_##_name = { \ + .attr = __ATTR(_name, _mode, _show, _store), \ + .type = (_type), \ + } +#define RC_FILTER_ATTR(_name, _mode, _show, _store, _type, _mask) \ + struct rc_filter_attribute dev_attr_##_name = { \ + .attr = __ATTR(_name, _mode, _show, _store), \ + .type = (_type), \ + .mask = (_mask), \ + } + +/** + * show_protocols() - shows the current/wakeup IR protocol(s) * @device: the device descriptor * @mattr: the device attribute struct (unused) * @buf: a pointer to the output buffer * * This routine is a callback routine for input read the IR protocol type(s). - * it is trigged by reading /sys/class/rc/rc?/protocols. + * it is trigged by reading /sys/class/rc/rc?/[wakeup_]protocols. * It returns the protocol names of supported protocols. * Enabled protocols are printed in brackets. * @@ -812,6 +843,7 @@ static ssize_t show_protocols(struct dev struct device_attribute *mattr, char *buf) { struct rc_dev *dev = to_rc_dev(device); + struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr); u64 allowed, enabled; char *tmp = buf; int i; @@ -822,9 +854,10 @@ static ssize_t show_protocols(struct dev mutex_lock(&dev->lock); - enabled = dev->enabled_protocols; - if (dev->driver_type == RC_DRIVER_SCANCODE) - allowed = dev->allowed_protos; + enabled = dev->enabled_protocols[fattr->type]; + if (dev->driver_type == RC_DRIVER_SCANCODE || + fattr->type == RC_FILTER_WAKEUP) + allowed = dev->allowed_protocols[fattr->type]; else if (dev->raw) allowed = ir_raw_get_allowed_protocols(); else { @@ -856,14 +889,14 @@ static ssize_t show_protocols(struct dev } /** - * store_protocols() - changes the current IR protocol(s) + * store_protocols() - changes the current/wakeup IR protocol(s) * @device: the device descriptor * @mattr: the device attribute struct (unused) * @buf: a pointer to the input buffer * @len: length of the input buffer * * This routine is for changing the IR protocol type. - * It is trigged by writing to /sys/class/rc/rc?/protocols. + * It is trigged by writing to /sys/class/rc/rc?/[wakeup_]protocols. * Writing "+proto" will add a protocol to the list of enabled protocols. * Writing "-proto" will remove a protocol from the list of enabled protocols. * Writing "proto" will enable only "proto". @@ -880,12 +913,15 @@ static ssize_t store_protocols(struct de size_t len) { struct rc_dev *dev = to_rc_dev(device); + struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr); bool enable, disable; const char *tmp; - u64 type; + u64 old_type, type; u64 mask; int rc, i, count = 0; ssize_t ret; + int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); + struct rc_scancode_filter local_filter, *filter; /* Device is being removed */ if (!dev) @@ -898,7 +934,8 @@ static ssize_t store_protocols(struct de ret = -EINVAL; goto out; } - type = dev->enabled_protocols; + old_type = dev->enabled_protocols[fattr->type]; + type = old_type; while ((tmp = strsep((char **) &data, " \n")) != NULL) { if (!*tmp) @@ -946,8 +983,10 @@ static ssize_t store_protocols(struct de goto out; } - if (dev->change_protocol) { - rc = dev->change_protocol(dev, &type); + change_protocol = (fattr->type == RC_FILTER_NORMAL) + ? dev->change_protocol : dev->change_wakeup_protocol; + if (change_protocol) { + rc = change_protocol(dev, &type); if (rc < 0) { IR_dprintk(1, "Error setting protocols to 0x%llx\n", (long long)type); @@ -956,10 +995,40 @@ static ssize_t store_protocols(struct de } } - dev->enabled_protocols = type; + dev->enabled_protocols[fattr->type] = type; IR_dprintk(1, "Current protocol(s): 0x%llx\n", (long long)type); + /* + * If the protocol is changed the filter needs updating. + * Try setting the same filter with the new protocol (if any). + * Fall back to clearing the filter. + */ + filter = &dev->scancode_filters[fattr->type]; + if (old_type != type && filter->mask) { + local_filter = *filter; + if (!type) { + /* no protocol => clear filter */ + ret = -1; + } else if (!dev->s_filter) { + /* generic filtering => accept any filter */ + ret = 0; + } else { + /* hardware filtering => try setting, otherwise clear */ + ret = dev->s_filter(dev, fattr->type, &local_filter); + } + if (ret < 0) { + /* clear the filter */ + local_filter.data = 0; + local_filter.mask = 0; + if (dev->s_filter) + dev->s_filter(dev, fattr->type, &local_filter); + } + + /* commit the new filter */ + *filter = local_filter; + } + ret = len; out: @@ -967,6 +1036,115 @@ out: return ret; } +/** + * show_filter() - shows the current scancode filter value or mask + * @device: the device descriptor + * @attr: the device attribute struct + * @buf: a pointer to the output buffer + * + * This routine is a callback routine to read a scancode filter value or mask. + * It is trigged by reading /sys/class/rc/rc?/[wakeup_]filter[_mask]. + * It prints the current scancode filter value or mask of the appropriate filter + * type in hexadecimal into @buf and returns the size of the buffer. + * + * Bits of the filter value corresponding to set bits in the filter mask are + * compared against input scancodes and non-matching scancodes are discarded. + * + * dev->lock is taken to guard against races between device registration, + * store_filter and show_filter. + */ +static ssize_t show_filter(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct rc_dev *dev = to_rc_dev(device); + struct rc_filter_attribute *fattr = to_rc_filter_attr(attr); + u32 val; + + /* Device is being removed */ + if (!dev) + return -EINVAL; + + mutex_lock(&dev->lock); + if (fattr->mask) + val = dev->scancode_filters[fattr->type].mask; + else + val = dev->scancode_filters[fattr->type].data; + mutex_unlock(&dev->lock); + + return sprintf(buf, "%#x\n", val); +} + +/** + * store_filter() - changes the scancode filter value + * @device: the device descriptor + * @attr: the device attribute struct + * @buf: a pointer to the input buffer + * @len: length of the input buffer + * + * This routine is for changing a scancode filter value or mask. + * It is trigged by writing to /sys/class/rc/rc?/[wakeup_]filter[_mask]. + * Returns -EINVAL if an invalid filter value for the current protocol was + * specified or if scancode filtering is not supported by the driver, otherwise + * returns @len. + * + * Bits of the filter value corresponding to set bits in the filter mask are + * compared against input scancodes and non-matching scancodes are discarded. + * + * dev->lock is taken to guard against races between device registration, + * store_filter and show_filter. + */ +static ssize_t store_filter(struct device *device, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct rc_dev *dev = to_rc_dev(device); + struct rc_filter_attribute *fattr = to_rc_filter_attr(attr); + struct rc_scancode_filter local_filter, *filter; + int ret; + unsigned long val; + + /* Device is being removed */ + if (!dev) + return -EINVAL; + + ret = kstrtoul(buf, 0, &val); + if (ret < 0) + return ret; + + /* Scancode filter not supported (but still accept 0) */ + if (!dev->s_filter && fattr->type != RC_FILTER_NORMAL) + return val ? -EINVAL : count; + + mutex_lock(&dev->lock); + + /* Tell the driver about the new filter */ + filter = &dev->scancode_filters[fattr->type]; + local_filter = *filter; + if (fattr->mask) + local_filter.mask = val; + else + local_filter.data = val; + if (!dev->enabled_protocols[fattr->type] && local_filter.mask) { + /* refuse to set a filter unless a protocol is enabled */ + ret = -EINVAL; + goto unlock; + } + if (dev->s_filter) { + ret = dev->s_filter(dev, fattr->type, &local_filter); + if (ret < 0) + goto unlock; + } + + /* Success, commit the new filter */ + *filter = local_filter; + +unlock: + mutex_unlock(&dev->lock); + return (ret < 0) ? ret : count; +} + static void rc_dev_release(struct device *device) { } @@ -996,11 +1174,26 @@ static int rc_dev_uevent(struct device * /* * Static device attribute struct with the sysfs attributes for IR's */ -static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR, - show_protocols, store_protocols); +static RC_PROTO_ATTR(protocols, S_IRUGO | S_IWUSR, + show_protocols, store_protocols, RC_FILTER_NORMAL); +static RC_PROTO_ATTR(wakeup_protocols, S_IRUGO | S_IWUSR, + show_protocols, store_protocols, RC_FILTER_WAKEUP); +static RC_FILTER_ATTR(filter, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_NORMAL, false); +static RC_FILTER_ATTR(filter_mask, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_NORMAL, true); +static RC_FILTER_ATTR(wakeup_filter, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_WAKEUP, false); +static RC_FILTER_ATTR(wakeup_filter_mask, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_WAKEUP, true); static struct attribute *rc_dev_attrs[] = { - &dev_attr_protocols.attr, + &dev_attr_protocols.attr.attr, + &dev_attr_wakeup_protocols.attr.attr, + &dev_attr_filter.attr.attr, + &dev_attr_filter_mask.attr.attr, + &dev_attr_wakeup_filter.attr.attr, + &dev_attr_wakeup_filter_mask.attr.attr, NULL, }; @@ -1091,14 +1284,6 @@ int rc_register_device(struct rc_dev *de if (dev->close) dev->input_dev->close = ir_close; - /* - * Take the lock here, as the device sysfs node will appear - * when device_add() is called, which may trigger an ir-keytable udev - * rule, which will in turn call show_protocols and access - * dev->enabled_protocols before it has been initialized. - */ - mutex_lock(&dev->lock); - do { devno = find_first_zero_bit(ir_core_dev_number, IRRCV_NUM_DEVICES); @@ -1107,6 +1292,14 @@ int rc_register_device(struct rc_dev *de return -ENOMEM; } while (test_and_set_bit(devno, ir_core_dev_number)); + /* + * Take the lock here, as the device sysfs node will appear + * when device_add() is called, which may trigger an ir-keytable udev + * rule, which will in turn call show_protocols and access + * dev->enabled_protocols before it has been initialized. + */ + mutex_lock(&dev->lock); + dev->devno = devno; dev_set_name(&dev->dev, "rc%ld", dev->devno); dev_set_drvdata(&dev->dev, dev); @@ -1172,7 +1365,7 @@ int rc_register_device(struct rc_dev *de rc = dev->change_protocol(dev, &rc_type); if (rc < 0) goto out_raw; - dev->enabled_protocols = rc_type; + dev->enabled_protocols[RC_FILTER_NORMAL] = rc_type; } mutex_unlock(&dev->lock); --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -922,7 +922,7 @@ static struct rc_dev *redrat3_init_rc_de rc->dev.parent = dev; rc->priv = rr3; rc->driver_type = RC_DRIVER_IR_RAW; - rc->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rc, RC_BIT_ALL); rc->timeout = US_TO_NS(2750); rc->tx_ir = redrat3_transmit_ir; rc->s_tx_carrier = redrat3_set_tx_carrier; --- a/drivers/media/rc/st_rc.c +++ b/drivers/media/rc/st_rc.c @@ -287,7 +287,7 @@ static int st_rc_probe(struct platform_d st_rc_hardware_init(rc_dev); rdev->driver_type = RC_DRIVER_IR_RAW; - rdev->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rdev, RC_BIT_ALL); /* rx sampling rate is 10Mhz */ rdev->rx_resolution = 100; rdev->timeout = US_TO_NS(MAX_SYMB_TIME); --- a/drivers/media/rc/streamzap.c +++ b/drivers/media/rc/streamzap.c @@ -322,7 +322,7 @@ static struct rc_dev *streamzap_init_rc_ rdev->dev.parent = dev; rdev->priv = sz; rdev->driver_type = RC_DRIVER_IR_RAW; - rdev->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rdev, RC_BIT_ALL); rdev->driver_name = DRIVER_NAME; rdev->map_name = RC_MAP_STREAMZAP; --- a/drivers/media/rc/ttusbir.c +++ b/drivers/media/rc/ttusbir.c @@ -318,7 +318,7 @@ static int ttusbir_probe(struct usb_inte usb_to_input_id(tt->udev, &rc->input_id); rc->dev.parent = &intf->dev; rc->driver_type = RC_DRIVER_IR_RAW; - rc->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(rc, RC_BIT_ALL); rc->priv = tt; rc->driver_name = DRIVER_NAME; rc->map_name = RC_MAP_TT_1500; --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -1082,7 +1082,7 @@ wbcir_probe(struct pnp_dev *device, cons data->dev->dev.parent = &device->dev; data->dev->timeout = MS_TO_NS(100); data->dev->rx_resolution = US_TO_NS(2); - data->dev->allowed_protos = RC_BIT_ALL; + rc_set_allowed_protocols(data->dev, RC_BIT_ALL); err = rc_register_device(data->dev); if (err) --- a/drivers/media/usb/dvb-usb/dvb-usb-remote.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-remote.c @@ -272,7 +272,7 @@ static int rc_core_dvb_usb_remote_init(s dev->driver_name = d->props.rc.core.module_name; dev->map_name = d->props.rc.core.rc_codes; dev->change_protocol = d->props.rc.core.change_protocol; - dev->allowed_protos = d->props.rc.core.allowed_protos; + rc_set_allowed_protocols(dev, d->props.rc.core.allowed_protos); dev->driver_type = d->props.rc.core.driver_type; usb_to_input_id(d->udev, &dev->input_id); dev->input_name = "IR-receiver inside an USB DVB receiver"; --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c @@ -164,7 +164,7 @@ static int dvb_usbv2_remote_init(struct dev->driver_name = (char *) d->props->driver_name; dev->map_name = d->rc.map_name; dev->driver_type = d->rc.driver_type; - dev->allowed_protos = d->rc.allowed_protos; + rc_set_allowed_protocols(dev, d->rc.allowed_protos); dev->change_protocol = d->rc.change_protocol; dev->priv = d; --- a/drivers/media/usb/em28xx/em28xx-input.c +++ b/drivers/media/usb/em28xx/em28xx-input.c @@ -725,7 +725,7 @@ static int em28xx_ir_init(struct em28xx case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: rc->map_name = RC_MAP_HAUPPAUGE; ir->get_key_i2c = em28xx_get_key_em_haup; - rc->allowed_protos = RC_BIT_RC5; + rc_set_allowed_protocols(rc, RC_BIT_RC5); break; case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE: rc->map_name = RC_MAP_WINFAST_USBII_DELUXE; @@ -741,7 +741,7 @@ static int em28xx_ir_init(struct em28xx switch (dev->chip_id) { case CHIP_ID_EM2860: case CHIP_ID_EM2883: - rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC; + rc_set_allowed_protocols(rc, RC_BIT_RC5 | RC_BIT_NEC); ir->get_key = default_polling_getkey; break; case CHIP_ID_EM2884: @@ -749,8 +749,8 @@ static int em28xx_ir_init(struct em28xx case CHIP_ID_EM28174: case CHIP_ID_EM28178: ir->get_key = em2874_polling_getkey; - rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC | - RC_BIT_RC6_0; + rc_set_allowed_protocols(rc, RC_BIT_RC5 | RC_BIT_NEC | + RC_BIT_RC6_0); break; default: err = -ENODEV; --- a/drivers/media/usb/tm6000/tm6000-input.c +++ b/drivers/media/usb/tm6000/tm6000-input.c @@ -422,7 +422,7 @@ int tm6000_ir_init(struct tm6000_core *d ir->rc = rc; /* input setup */ - rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC; + rc_set_allowed_protocols(rc, RC_BIT_RC5 | RC_BIT_NEC); /* Neded, in order to support NEC remotes with 24 or 32 bits */ rc->scanmask = 0xffff; rc->priv = ir; --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -35,6 +35,29 @@ enum rc_driver_type { }; /** + * struct rc_scancode_filter - Filter scan codes. + * @data: Scancode data to match. + * @mask: Mask of bits of scancode to compare. + */ +struct rc_scancode_filter { + u32 data; + u32 mask; +}; + +/** + * enum rc_filter_type - Filter type constants. + * @RC_FILTER_NORMAL: Filter for normal operation. + * @RC_FILTER_WAKEUP: Filter for waking from suspend. + * @RC_FILTER_MAX: Number of filter types. + */ +enum rc_filter_type { + RC_FILTER_NORMAL = 0, + RC_FILTER_WAKEUP, + + RC_FILTER_MAX +}; + +/** * struct rc_dev - represents a remote control device * @dev: driver model's view of this device * @input_name: name of the input child device @@ -50,8 +73,10 @@ enum rc_driver_type { * @input_dev: the input child device used to communicate events to userspace * @driver_type: specifies if protocol decoding is done in hardware or software * @idle: used to keep track of RX state - * @allowed_protos: bitmask with the supported RC_BIT_* protocols - * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols + * @allowed_protocols: bitmask with the supported RC_BIT_* protocols for each + * filter type + * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols for each + * filter type * @scanmask: some hardware decoders are not capable of providing the full * scancode to the application. As this is a hardware limit, we can't do * anything with it. Yet, as the same keycode table can be used with other @@ -70,7 +95,10 @@ enum rc_driver_type { * @max_timeout: maximum timeout supported by device * @rx_resolution : resolution (in ns) of input sampler * @tx_resolution: resolution (in ns) of output sampler + * @scancode_filters: scancode filters (indexed by enum rc_filter_type) * @change_protocol: allow changing the protocol used on hardware decoders + * @change_wakeup_protocol: allow changing the protocol used for wakeup + * filtering * @open: callback to allow drivers to enable polling/irq when IR input device * is opened. * @close: callback to allow drivers to disable polling/irq when IR input device @@ -84,6 +112,7 @@ enum rc_driver_type { * device doesn't interrupt host until it sees IR pulses * @s_learning_mode: enable wide band receiver used for learning * @s_carrier_report: enable carrier reports + * @s_filter: set the scancode filter of a given type */ struct rc_dev { struct device dev; @@ -99,8 +128,8 @@ struct rc_dev { struct input_dev *input_dev; enum rc_driver_type driver_type; bool idle; - u64 allowed_protos; - u64 enabled_protocols; + u64 allowed_protocols[RC_FILTER_MAX]; + u64 enabled_protocols[RC_FILTER_MAX]; u32 users; u32 scanmask; void *priv; @@ -116,7 +145,9 @@ struct rc_dev { u32 max_timeout; u32 rx_resolution; u32 tx_resolution; + struct rc_scancode_filter scancode_filters[RC_FILTER_MAX]; int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); + int (*change_wakeup_protocol)(struct rc_dev *dev, u64 *rc_type); int (*open)(struct rc_dev *dev); void (*close)(struct rc_dev *dev); int (*s_tx_mask)(struct rc_dev *dev, u32 mask); @@ -127,10 +158,49 @@ struct rc_dev { void (*s_idle)(struct rc_dev *dev, bool enable); int (*s_learning_mode)(struct rc_dev *dev, int enable); int (*s_carrier_report) (struct rc_dev *dev, int enable); + int (*s_filter)(struct rc_dev *dev, + enum rc_filter_type type, + struct rc_scancode_filter *filter); }; #define to_rc_dev(d) container_of(d, struct rc_dev, dev) +static inline bool rc_protocols_allowed(struct rc_dev *rdev, u64 protos) +{ + return rdev->allowed_protocols[RC_FILTER_NORMAL] & protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_allowed_protocols(struct rc_dev *rdev, u64 protos) +{ + rdev->allowed_protocols[RC_FILTER_NORMAL] = protos; +} + +static inline bool rc_protocols_enabled(struct rc_dev *rdev, u64 protos) +{ + return rdev->enabled_protocols[RC_FILTER_NORMAL] & protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_enabled_protocols(struct rc_dev *rdev, u64 protos) +{ + rdev->enabled_protocols[RC_FILTER_NORMAL] = protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_allowed_wakeup_protocols(struct rc_dev *rdev, + u64 protos) +{ + rdev->allowed_protocols[RC_FILTER_WAKEUP] = protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_enabled_wakeup_protocols(struct rc_dev *rdev, + u64 protos) +{ + rdev->enabled_protocols[RC_FILTER_WAKEUP] = protos; +} + /* * From rc-main.c * Those functions can be used on any type of Remote Controller. They