#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xF7E0
#define PRODUCT_ID 0x0412
#define DEVICE_VER 0x0003
#define MANUFACTURER Fate Everywhere
#define PRODUCT Stand Aside
#define DESCRIPTION A compact 60% keyboard
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D1, F4, F6, F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { F5, D0, D4, C6, D7, E6, B4, B5 }
#define UNUSED_PINS {}
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN C7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Enable RGB Underlighting
*/
#define RGB_DI_PIN C7
#define RGBLED_NUM 12
#define RGBLIGHT_ANIMATIONS
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
/*
* HD44780 LCD Display Configuration
*/
/*
#define LCD_LINES 2 //< number of visible lines of the display
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
#if LCD_IO_MODE
#define LCD_PORT PORTB //< port for the LCD lines
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
#define LCD_RS_PORT LCD_PORT //< port for RS line
#define LCD_RS_PIN 3 //< pin for RS line
#define LCD_RW_PORT LCD_PORT //< port for RW line
#define LCD_RW_PIN 2 //< pin for RW line
#define LCD_E_PORT LCD_PORT //< port for Enable line
#define LCD_E_PIN 1 //< pin for Enable line
#endif
*/
id='n84' href='#n84'>84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
#
# Copyright (C) 2007 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
# $Id$
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=ntfs-3g
PKG_VERSION:=0.20070207-RC1
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tgz
PKG_SOURCE_URL:=http://www.ntfs-3g.org/
PKG_MD5SUM:=7c8c7a1338a0d36e315b665422e04c46
PKG_CAT:=zcat
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
PKG_BUILD_DEPENDS:=libfuse
include $(INCLUDE_DIR)/package.mk
define Package/ntfs-3g
TITLE:=NTFS-3G
DEPENDS:=+libfuse +fuse-utils @LINUX_2_6
SECTION:=utils
CATEGORY:=Utilities
DESCRIPTION:=\
Third generation Read/Write NTFS driver
URL:=http://www.ntfs-3g.org
endef
define Build/Configure
(cd $(PKG_BUILD_DIR); rm -f config.cache; \
touch configure.in ; \
touch aclocal.m4 ; \
touch Makefile.in ; \
touch include/config.h.in ; \
touch configure ; \
$(TARGET_CONFIGURE_OPTS) \
PKG_CONFIG_PATH="$(STAGING_DIR)/usr/lib/pkgconfig" \
PKG_CONFIG_LIBDIR="$(STAGING_DIR)/usr/lib/pkgconfig" \
CPPFLAGS="-I$(STAGING_DIR)/usr/include" \
CFLAGS="$(TARGET_CFLAGS)" \
LDFLAGS="-L$(STAGING_DIR)/usr/lib" \
./configure \
--target=$(GNU_TARGET_NAME) \
--host=$(GNU_TARGET_NAME) \
--build=$(GNU_HOST_NAME) \
--program-prefix="" \
--program-suffix="" \
--prefix=/usr \
--exec-prefix=/usr \
--bindir=/usr/bin \
--datadir=/usr/share \
--includedir=/usr/include \
--infodir=/usr/share/info \
--libdir=/usr/lib \
--libexecdir=/usr/lib \
--localstatedir=/var \
--mandir=/usr/share/man \
--sbindir=/usr/sbin \
--sysconfdir=/etc \
$(DISABLE_LARGEFILE) \
$(DISABLE_NLS) \
--enable-shared \
--enable-static \
--disable-rpath \
--enable-kernel-module \
--enable-lib \
--enable-util \
--disable-example \
--disable-auto-modprobe \
--with-kernel="$(LINUX_DIR)" \
--disable-mtab \
);
endef
define Build/Compile
$(MAKE) -C $(PKG_BUILD_DIR) \
ARCH="$(LINUX_KARCH)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
DESTDIR="$(PKG_INSTALL_DIR)" \
all install
endef
define Build/InstallDev
mkdir -p $(STAGING_DIR)/usr/include
$(CP) $(PKG_INSTALL_DIR)/usr/include/ntfs-3g $(STAGING_DIR)/usr/include/
mkdir -p $(STAGING_DIR)/usr/lib
$(CP) $(PKG_INSTALL_DIR)/usr/lib/libntfs-3g.{a,so*} $(STAGING_DIR)/usr/lib/
endef
define Build/UninstallDev
rm -rf $(STAGING_DIR)/usr/include/ntfs-3g \
$(STAGING_DIR)/usr/lib/libntfs-3g.{a,so*}
endef
define Package/ntfs-3g/install
$(INSTALL_DIR) $(1)/usr/bin
$(CP) $(PKG_INSTALL_DIR)/usr/bin/ntfs-3g $(1)/usr/bin/
$(INSTALL_DIR) $(1)/usr/lib
$(CP) $(PKG_INSTALL_DIR)/usr/lib/libntfs-3g.so.* $(1)/usr/lib/
endef
$(eval $(call BuildPackage,ntfs-3g))
|