/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef MCUCONF_H
#define MCUCONF_H
/*
* STM32F3xx drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
#define STM32F3xx_MCUCONF
#define STM32F303_MCUCONF
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
#define STM32_HSI_ENABLED TRUE
#define STM32_LSI_ENABLED TRUE
#define STM32_HSE_ENABLED TRUE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PREDIV_VALUE 1
#define STM32_PLLMUL_VALUE 9
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
#define STM32_USART1SW STM32_USART1SW_PCLK
#define STM32_USART2SW STM32_USART2SW_PCLK
#define STM32_USART3SW STM32_USART3SW_PCLK
#define STM32_UART4SW STM32_UART4SW_PCLK
#define STM32_UART5SW STM32_UART5SW_PCLK
#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
#define STM32_TIM1SW STM32_TIM1SW_PCLK2
#define STM32_TIM8SW STM32_TIM8SW_PCLK2
#define STM32_RTCSEL STM32_RTCSEL_LSI
#define STM32_USB_CLOCK_REQUIRED TRUE
#define STM32_USBPRE STM32_USBPRE_DIV1P5
/*
* IRQ system settings.
*/
#define STM32_IRQ_EXTI0_PRIORITY 6
#define STM32_IRQ_EXTI1_PRIORITY 6
#define STM32_IRQ_EXTI2_PRIORITY 6
#define STM32_IRQ_EXTI3_PRIORITY 6
#define STM32_IRQ_EXTI4_PRIORITY 6
#define STM32_IRQ_EXTI5_9_PRIORITY 6
#define STM32_IRQ_EXTI10_15_PRIORITY 6
#define STM32_IRQ_EXTI16_PRIORITY 6
#define STM32_IRQ_EXTI17_PRIORITY 15
#define STM32_IRQ_EXTI18_PRIORITY 6
#define STM32_IRQ_EXTI19_PRIORITY 15
#define STM32_IRQ_EXTI20_PRIORITY 15
#define STM32_IRQ_EXTI21_22_29_PRIORITY 6
#define STM32_IRQ_EXTI30_32_PRIORITY 6
#define STM32_IRQ_EXTI33_PRIORITY 6
#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
#define STM32_IRQ_TIM1_CC_PRIORITY 7
/*
* ADC driver system settings.
*/
#define STM32_ADC_DUAL_MODE FALSE
#define STM32_ADC_COMPACT_SAMPLES FALSE
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_USE_ADC2 FALSE
#define STM32_ADC_USE_ADC3 FALSE
#define STM32_ADC_USE_ADC4 FALSE
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC2_DMA_PRIORITY 2
#define STM32_ADC_ADC3_DMA_PRIORITY 2
#define STM32_ADC_ADC4_DMA_PRIORITY 2
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
#define STM32_ADC_ADC3_IRQ_PRIORITY 5
#define STM32_ADC_ADC4_IRQ_PRIORITY 5
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
/*
* CAN driver system settings.
*/
#define STM32_CAN_USE_CAN1 FALSE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
/*
* DAC driver system settings.
*/
#define STM32_DAC_DUAL_MODE FALSE
#define STM32_DAC_USE_DAC1_CH1 TRUE
#define STM32_DAC_USE_DAC1_CH2 TRUE
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE
#define STM32_GPT_USE_TIM6 TRUE
#define STM32_GPT_USE_TIM7 TRUE
#define STM32_GPT_USE_TIM8 TRUE
#define STM32_GPT_USE_TIM15 FALSE
#define STM32_GPT_USE_TIM16 FALSE
#define STM32_GPT_USE_TIM17 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
#define STM32_GPT_TIM6_IRQ_PRIORITY 7
#define STM32_GPT_TIM7_IRQ_PRIORITY 7
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 TRUE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 10
#define STM32_I2C_I2C2_IRQ_PRIORITY 10
#define STM32_I2C_USE_DMA FALSE
#define STM32_I2C_I2C1_DMA_PRIORITY 1
#define STM32_I2C_I2C2_DMA_PRIORITY 1
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_USE_TIM4 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_USE_TIM15 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 TRUE
#define STM32_PWM_USE_TIM3 TRUE
#define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_USE_TIM15 FALSE
#define STM32_PWM_USE_TIM16 FALSE
#define STM32_PWM_USE_TIM17 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
/*
* RTC driver system settings.
*/
#define STM32_RTC_PRESA_VALUE 32
#define STM32_RTC_PRESS_VALUE 1024
#define STM32_RTC_CR_INIT 0
#define STM32_RTC_TAMPCR_INIT 0
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 TRUE
#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12
#define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_UART4_PRIORITY 12
#define STM32_SERIAL_UART5_PRIORITY 12
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 8
#define STM32_ST_USE_TIMER 3
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
/*
* WDG driver system settings.
*/
#define STM32_WDG_USE_IWDG FALSE
#endif /* MCUCONF_H */
09'>209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
#!/usr/bin/env python
"""
# OpenWRT download directory cleanup utility.
# Delete all but the very last version of the program tarballs.
#
# Copyright (C) 2010 Michael Buesch <mb@bu3sch.de>
# Copyright (C) 2013 OpenWrt.org
"""
import sys
import os
import re
import getopt
# Commandline options
opt_dryrun = False
def parseVer_1234(match, filepath):
progname = match.group(1)
progversion = (int(match.group(2)) << 64) |\
(int(match.group(3)) << 48) |\
(int(match.group(4)) << 32) |\
(int(match.group(5)) << 16)
return (progname, progversion)
def parseVer_123(match, filepath):
progname = match.group(1)
try:
patchlevel = match.group(5)
except (IndexError), e:
patchlevel = None
if patchlevel:
patchlevel = ord(patchlevel[0])
else:
patchlevel = 0
progversion = (int(match.group(2)) << 64) |\
(int(match.group(3)) << 48) |\
(int(match.group(4)) << 32) |\
patchlevel
return (progname, progversion)
def parseVer_12(match, filepath):
progname = match.group(1)
try:
patchlevel = match.group(4)
except (IndexError), e:
patchlevel = None
if patchlevel:
patchlevel = ord(patchlevel[0])
else:
patchlevel = 0
progversion = (int(match.group(2)) << 64) |\
(int(match.group(3)) << 48) |\
patchlevel
return (progname, progversion)
def parseVer_r(match, filepath):
progname = match.group(1)
progversion = (int(match.group(2)) << 64)
return (progname, progversion)
def parseVer_ymd(match, filepath):
progname = match.group(1)
progversion = (int(match.group(2)) << 64) |\
(int(match.group(3)) << 48) |\
(int(match.group(4)) << 32)
return (progname, progversion)
def parseVer_GIT(match, filepath):
progname = match.group(1)
st = os.stat(filepath)
progversion = int(st.st_mtime) << 64
return (progname, progversion)
extensions = (
".tar.gz",
".tar.bz2",
".tar.xz",
".orig.tar.gz",
".orig.tar.bz2",
".orig.tar.xz",
".zip",
".tgz",
".tbz",
".txz",
)
versionRegex = (
(re.compile(r"(.+)[-_](\d+)\.(\d+)\.(\d+)\.(\d+)"), parseVer_1234), # xxx-1.2.3.4
(re.compile(r"(.+)[-_](\d\d\d\d)-?(\d\d)-?(\d\d)"), parseVer_ymd), # xxx-YYYY-MM-DD
(re.compile(r"(.+)[-_]([0-9a-fA-F]{40,40})"), parseVer_GIT), # xxx-GIT_SHASUM
(re.compile(r"(.+)[-_](\d+)\.(\d+)\.(\d+)(\w?)"), parseVer_123), # xxx-1.2.3a
(re.compile(r"(.+)[-_](\d+)_(\d+)_(\d+)"), parseVer_123), # xxx-1_2_3
(re.compile(r"(.+)[-_](\d+)\.(\d+)(\w?)"), parseVer_12), # xxx-1.2a
(re.compile(r"(.+)[-_]r?(\d+)"), parseVer_r), # xxx-r1111
)
blacklist = [
("linux", re.compile(r"linux-.*")),
("gcc", re.compile(r"gcc-.*")),
("wl_apsta", re.compile(r"wl_apsta.*")),
(".fw", re.compile(r".*\.fw")),
(".arm", re.compile(r".*\.arm")),
(".bin", re.compile(r".*\.bin")),
("rt-firmware", re.compile(r"RT[\d\w]+_Firmware.*")),
]
class EntryParseError(Exception): pass
class Entry:
def __init__(self, directory, filename):
self.directory = directory
self.filename = filename
self.progname = ""
self.fileext = ""
for ext in extensions:
if filename.endswith(ext):
filename = filename[0:0-len(ext)]
self.fileext = ext
break
else:
print self.filename, "has an unknown file-extension"
raise EntryParseError("ext")
for (regex, parseVersion) in versionRegex:
match = regex.match(filename)
if match:
(self.progname, self.version) = parseVersion(
match, directory + "/" + filename + self.fileext)
break
else:
print self.filename, "has an unknown version pattern"
raise EntryParseError("ver")
def deleteFile(self):
path = (self.directory + "/" + self.filename).replace("//", "/")
print "Deleting", path
if not opt_dryrun:
os.unlink(path)
def __eq__(self, y):
return self.filename == y.filename
def __ge__(self, y):
return self.version >= y.version
def usage():
print "OpenWRT download directory cleanup utility"
print "Usage: " + sys.argv[0] + " [OPTIONS] <path/to/dl>"
print ""
print " -d|--dry-run Do a dry-run. Don't delete any files"
print " -B|--show-blacklist Show the blacklist and exit"
print " -w|--whitelist ITEM Remove ITEM from blacklist"
def main(argv):
global opt_dryrun
try:
(opts, args) = getopt.getopt(argv[1:],
"hdBw:",
[ "help", "dry-run", "show-blacklist", "whitelist=", ])
if len(args) != 1:
usage()
return 1
except getopt.GetoptError:
usage()
return 1
directory = args[0]
for (o, v) in opts:
if o in ("-h", "--help"):
usage()
return 0
if o in ("-d", "--dry-run"):
opt_dryrun = True
if o in ("-w", "--whitelist"):
for i in range(0, len(blacklist)):
(name, regex) = blacklist[i]
if name == v:
del blacklist[i]
break
else:
print "Whitelist error: Item", v,\
"is not in blacklist"
return 1
if o in ("-B", "--show-blacklist"):
for (name, regex) in blacklist:
print name
return 0
# Create a directory listing and parse the file names.
entries = []
for filename in os.listdir(directory):
if filename == "." or filename == "..":
continue
for (name, regex) in blacklist:
if regex.match(filename):
if opt_dryrun:
print filename, "is blacklisted"
break
else:
try:
entries.append(Entry(directory, filename))
except (EntryParseError), e: pass
# Create a map of programs
progmap = {}
for entry in entries:
if entry.progname in progmap.keys():
progmap[entry.progname].append(entry)
else:
progmap[entry.progname] = [entry,]
# Traverse the program map and delete everything but the last version
for prog in progmap:
lastVersion = None
versions = progmap[prog]
for version in versions:
if lastVersion is None or version >= lastVersion:
lastVersion = version
if lastVersion:
for version in versions:
if version != lastVersion:
version.deleteFile()
if opt_dryrun:
print "Keeping", lastVersion.filename
return 0
if __name__ == "__main__":
sys.exit(main(sys.argv))
|