remove timer; tick based on RTC PER7 interrupt

17 files changed, 18 insertions, 979 deletions

diff --git a/Smol Watch Project/My Project/.atmelstart/AtmelStart.gpdsc b/Smol Watch Project/My Project/.atmelstart/AtmelStart.gpdsc
index 0b330bc3..6951bd52 100644
--- a/Smol Watch Project/My Project/.atmelstart/AtmelStart.gpdsc
+++ b/Smol Watch Project/My Project/.atmelstart/AtmelStart.gpdsc
@@ -48,7 +48,6 @@
         <file category="doc" condition="ARMCC, GCC, IAR" name="hal/documentation/i2c_master_sync.rst"/>
         <file category="doc" condition="ARMCC, GCC, IAR" name="hal/documentation/pwm.rst"/>
         <file category="doc" condition="ARMCC, GCC, IAR" name="hal/documentation/slcd_sync.rst"/>
-        <file category="doc" condition="ARMCC, GCC, IAR" name="hal/documentation/timer.rst"/>
         <file category="header" condition="ARMCC, GCC, IAR" name="hal/include/hal_atomic.h"/>
         <file category="header" condition="ARMCC, GCC, IAR" name="hal/include/hal_calendar.h"/>
         <file category="header" condition="ARMCC, GCC, IAR" name="hal/include/hal_delay.h"/>
@@ -144,7 +143,6 @@
         <file category="source" condition="ARMCC, GCC, IAR" name="examples/driver_examples.c"/>
         <file category="header" condition="ARMCC, GCC, IAR" name="hal/include/hal_adc_sync.h"/>
         <file category="header" condition="ARMCC, GCC, IAR" name="hal/include/hal_pwm.h"/>
-        <file category="header" condition="ARMCC, GCC, IAR" name="hal/include/hal_timer.h"/>
         <file category="header" condition="ARMCC, GCC, IAR" name="hal/include/hpl_adc_async.h"/>
         <file category="header" condition="ARMCC, GCC, IAR" name="hal/include/hpl_adc_sync.h"/>
         <file category="header" condition="ARMCC, GCC, IAR" name="hal/include/hpl_calendar.h"/>
@@ -163,7 +161,6 @@
         <file category="source" condition="ARMCC, GCC, IAR" name="hal/src/hal_calendar.c"/>
         <file category="source" condition="ARMCC, GCC, IAR" name="hal/src/hal_ext_irq.c"/>
         <file category="source" condition="ARMCC, GCC, IAR" name="hal/src/hal_pwm.c"/>
-        <file category="source" condition="ARMCC, GCC, IAR" name="hal/src/hal_timer.c"/>
         <file category="header" condition="ARMCC, GCC, IAR" name="hal/utils/include/parts.h"/>
         <file category="source" condition="ARMCC, GCC, IAR" name="hpl/adc/hpl_adc.c"/>
         <file category="header" condition="ARMCC, GCC, IAR" name="hpl/adc/hpl_adc_base.h"/>
diff --git a/Smol Watch Project/My Project/.atmelstart/atmel_start_config.atstart b/Smol Watch Project/My Project/.atmelstart/atmel_start_config.atstart
index 4ed8c273..95c9e7f0 100644
--- a/Smol Watch Project/My Project/.atmelstart/atmel_start_config.atstart
+++ b/Smol Watch Project/My Project/.atmelstart/atmel_start_config.atstart
@@ -859,37 +859,6 @@ drivers:
     variant: null
     clocks:
       domain_group: null
-  TIMER_0:
-    user_label: TIMER_0
-    definition: Atmel:SAML22_Drivers:0.0.1::SAML22J18A-AN::TC0::driver_config_definition::Timer::HAL:Driver:Timer
-    functionality: Timer
-    api: HAL:Driver:Timer
-    configuration:
-      tc_arch_dbgrun: false
-      tc_arch_evact: Event action disabled
-      tc_arch_mceo0: false
-      tc_arch_mceo1: false
-      tc_arch_ondemand: false
-      tc_arch_ovfeo: false
-      tc_arch_presync: Reload or reset counter on next GCLK
-      tc_arch_runstdby: true
-      tc_arch_tcei: false
-      tc_arch_tcinv: false
-      timer_advanced_configuration: true
-      timer_event_control: false
-      timer_prescaler: Divide by 2
-      timer_tick: 61
-    optional_signals: []
-    variant: null
-    clocks:
-      domain_group:
-        nodes:
-        - name: TC
-          input: Generic clock generator 3
-          external: false
-          external_frequency: 0
-        configuration:
-          tc_gclk_selection: Generic clock generator 3
   PWM_0:
     user_label: PWM_0
     definition: Atmel:SAML22_Drivers:0.0.1::SAML22J18A-AN::TC3::driver_config_definition::PWM::HAL:Driver:PWM
diff --git a/Smol Watch Project/My Project/Config/hpl_tc_config.h b/Smol Watch Project/My Project/Config/hpl_tc_config.h
index 8414d88a..61e5b1b6 100644
--- a/Smol Watch Project/My Project/Config/hpl_tc_config.h
+++ b/Smol Watch Project/My Project/Config/hpl_tc_config.h
@@ -4,177 +4,6 @@
 
 // <<< Use Configuration Wizard in Context Menu >>>
 
-#ifndef CONF_TC0_ENABLE
-#define CONF_TC0_ENABLE 1
-#endif
-
-#include "peripheral_clk_config.h"
-
-// <h> Basic configuration
-
-// <o> Prescaler
-// <0x0=> No division
-// <0x1=> Divide by 2
-// <0x2=> Divide by 4
-// <0x3=> Divide by 8
-// <0x4=> Divide by 16
-// <0x5=> Divide by 64
-// <0x6=> Divide by 256
-// <0x7=> Divide by 1024
-// <i> This defines the prescaler value
-// <id> timer_prescaler
-#ifndef CONF_TC0_PRESCALER
-#define CONF_TC0_PRESCALER 0x1
-#endif
-
-// <o> Length of one timer tick in uS <0-4294967295>
-// <id> timer_tick
-#ifndef CONF_TC0_TIMER_TICK
-#define CONF_TC0_TIMER_TICK 61
-#endif
-// </h>
-
-// <e> Advanced configuration
-// <id> timer_advanced_configuration
-#ifndef CONF_TC0__ADVANCED_CONFIGURATION_ENABLE
-#define CONF_TC0__ADVANCED_CONFIGURATION_ENABLE 1
-#endif
-
-// <y> Prescaler and Counter Synchronization Selection
-// <TC_CTRLA_PRESCSYNC_GCLK_Val"> Reload or reset counter on next GCLK
-// <TC_CTRLA_PRESCSYNC_PRESC_Val"> Reload or reset counter on next prescaler clock
-// <TC_CTRLA_PRESCSYNC_RESYNC_Val"> Reload or reset counter on next GCLK and reset prescaler counter
-// <i> These bits select if on retrigger event, the Counter should be cleared or reloaded on the next GCLK_TCx clock or on the next prescaled GCLK_TCx clock.
-// <id> tc_arch_presync
-#ifndef CONF_TC0_PRESCSYNC
-#define CONF_TC0_PRESCSYNC TC_CTRLA_PRESCSYNC_GCLK_Val
-#endif
-
-// <q> Run in standby
-// <i> Indicates whether the module will continue to run in standby sleep mode
-// <id> tc_arch_runstdby
-#ifndef CONF_TC0_RUNSTDBY
-#define CONF_TC0_RUNSTDBY 1
-#endif
-
-// <q> Run in debug mode
-// <i> Indicates whether the module will run in debug mode
-// <id> tc_arch_dbgrun
-#ifndef CONF_TC0_DBGRUN
-#define CONF_TC0_DBGRUN 0
-#endif
-
-// <q> Run on demand
-// <i> Run if requested by some other peripheral in the device
-// <id> tc_arch_ondemand
-#ifndef CONF_TC0_ONDEMAND
-#define CONF_TC0_ONDEMAND 0
-#endif
-
-// </e>
-
-// <e> Event control
-// <id> timer_event_control
-#ifndef CONF_TC0_EVENT_CONTROL_ENABLE
-#define CONF_TC0_EVENT_CONTROL_ENABLE 0
-#endif
-
-// <q> Output Event On Match or Capture on Channel 0
-// <i> Enable output of event on timer tick
-// <id> tc_arch_mceo0
-#ifndef CONF_TC0_MCEO0
-#define CONF_TC0_MCEO0 0
-#endif
-
-// <q> Output Event On Match or Capture on Channel 1
-// <i> Enable output of event on timer tick
-// <id> tc_arch_mceo1
-#ifndef CONF_TC0_MCEO1
-#define CONF_TC0_MCEO1 0
-#endif
-
-// <q> Output Event On Timer Tick
-// <i> Enable output of event on timer tick
-// <id> tc_arch_ovfeo
-#ifndef CONF_TC0_OVFEO
-#define CONF_TC0_OVFEO 0
-#endif
-
-// <q> Event Input
-// <i> Enable asynchronous input events
-// <id> tc_arch_tcei
-#ifndef CONF_TC0_TCEI
-#define CONF_TC0_TCEI 0
-#endif
-
-// <q> Inverted Event Input
-// <i> Invert the asynchronous input events
-// <id> tc_arch_tcinv
-#ifndef CONF_TC0_TCINV
-#define CONF_TC0_TCINV 0
-#endif
-
-// <o> Event action
-// <0=> Event action disabled
-// <1=> Start, restart or re-trigger TC on event
-// <2=> Count on event
-// <3=> Start on event
-// <4=> Time stamp capture
-// <5=> Period captured in CC0, pulse width in CC1
-// <6=> Period captured in CC1, pulse width in CC0
-// <7=> Pulse width capture
-// <i> Event which will be performed on an event
-//<id> tc_arch_evact
-#ifndef CONF_TC0_EVACT
-#define CONF_TC0_EVACT 0
-#endif
-// </e>
-
-// Default values which the driver needs in order to work correctly
-
-// Mode set to 32-bit
-#ifndef CONF_TC0_MODE
-#define CONF_TC0_MODE TC_CTRLA_MODE_COUNT32_Val
-#endif
-
-// CC 1 register set to 0
-#ifndef CONF_TC0_CC1
-#define CONF_TC0_CC1 0
-#endif
-
-#ifndef CONF_TC0_ALOCK
-#define CONF_TC0_ALOCK 0
-#endif
-
-// Not used in 32-bit mode
-#define CONF_TC0_PER 0
-
-// Calculating correct top value based on requested tick interval.
-#define CONF_TC0_PRESCALE (1 << CONF_TC0_PRESCALER)
-
-// Prescaler set to 64
-#if CONF_TC0_PRESCALER > 0x4
-#undef CONF_TC0_PRESCALE
-#define CONF_TC0_PRESCALE 64
-#endif
-
-// Prescaler set to 256
-#if CONF_TC0_PRESCALER > 0x5
-#undef CONF_TC0_PRESCALE
-#define CONF_TC0_PRESCALE 256
-#endif
-
-// Prescaler set to 1024
-#if CONF_TC0_PRESCALER > 0x6
-#undef CONF_TC0_PRESCALE
-#define CONF_TC0_PRESCALE 1024
-#endif
-
-#ifndef CONF_TC0_CC0
-#define CONF_TC0_CC0                                                                                                   \
-	(uint32_t)(((float)CONF_TC0_TIMER_TICK / 1000000.f) / (1.f / (CONF_GCLK_TC0_FREQUENCY / CONF_TC0_PRESCALE)))
-#endif
-
 #include <peripheral_clk_config.h>
 
 #ifndef CONF_TC3_ENABLE
diff --git a/Smol Watch Project/My Project/Config/peripheral_clk_config.h b/Smol Watch Project/My Project/Config/peripheral_clk_config.h
index 3ff28a39..9050e808 100644
--- a/Smol Watch Project/My Project/Config/peripheral_clk_config.h
+++ b/Smol Watch Project/My Project/Config/peripheral_clk_config.h
@@ -146,32 +146,6 @@
 // <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4
 
 // <i> Select the clock source for TC.
-#ifndef CONF_GCLK_TC0_SRC
-#define CONF_GCLK_TC0_SRC GCLK_PCHCTRL_GEN_GCLK3_Val
-#endif
-
-/**
- * \def CONF_GCLK_TC0_FREQUENCY
- * \brief TC0's Clock frequency
- */
-#ifndef CONF_GCLK_TC0_FREQUENCY
-#define CONF_GCLK_TC0_FREQUENCY 32768
-#endif
-
-// <y> TC Clock Source
-// <id> tc_gclk_selection
-
-// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0
-
-// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1
-
-// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2
-
-// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3
-
-// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4
-
-// <i> Select the clock source for TC.
 #ifndef CONF_GCLK_TC3_SRC
 #define CONF_GCLK_TC3_SRC GCLK_PCHCTRL_GEN_GCLK0_Val
 #endif
diff --git a/Smol Watch Project/My Project/My Project.cproj b/Smol Watch Project/My Project/My Project.cproj
index e0d7ff49..a4a9b383 100644
--- a/Smol Watch Project/My Project/My Project.cproj
+++ b/Smol Watch Project/My Project/My Project.cproj
@@ -142,11 +142,10 @@
           <AcmeProjectActionInfo Action="File" Source="driver_init.c" IsConfig="false" Hash="Zw9TBuFm3x3YlHbeguapNQ" />

           <AcmeProjectActionInfo Action="File" Source="driver_init.h" IsConfig="false" Hash="jGwg9E39uUvuPsyqQD0HpA" />

           <AcmeProjectActionInfo Action="File" Source="atmel_start_pins.h" IsConfig="false" Hash="5lmo1agoLOJW6nYY8SQiUQ" />

-          <AcmeProjectActionInfo Action="File" Source="examples/driver_examples.h" IsConfig="false" Hash="0DI0D6jkFhuGhaDnKmEnXA" />

-          <AcmeProjectActionInfo Action="File" Source="examples/driver_examples.c" IsConfig="false" Hash="YRl/+3+qtVZNdSNNmpcdgA" />

+          <AcmeProjectActionInfo Action="File" Source="examples/driver_examples.h" IsConfig="false" Hash="vA0AOZ9ZthDRQ3WRx2TPBA" />

+          <AcmeProjectActionInfo Action="File" Source="examples/driver_examples.c" IsConfig="false" Hash="tLQq4aGf9J1UF19OmI/x/Q" />

           <AcmeProjectActionInfo Action="File" Source="hal/include/hal_adc_sync.h" IsConfig="false" Hash="ez1X5T9kpYwT+1+5x4Pxqg" />

           <AcmeProjectActionInfo Action="File" Source="hal/include/hal_pwm.h" IsConfig="false" Hash="br6uNoL0TWVIiQVzPc8hPA" />

-          <AcmeProjectActionInfo Action="File" Source="hal/include/hal_timer.h" IsConfig="false" Hash="5pZVthtMl40VMvofOld2ng" />

           <AcmeProjectActionInfo Action="File" Source="hal/include/hpl_adc_async.h" IsConfig="false" Hash="kKbVmqgGDUkuWZYErBwgVA" />

           <AcmeProjectActionInfo Action="File" Source="hal/include/hpl_adc_sync.h" IsConfig="false" Hash="dCWrizZn0RtcCM73jZ/k6A" />

           <AcmeProjectActionInfo Action="File" Source="hal/include/hpl_calendar.h" IsConfig="false" Hash="E2gwBBatdcqZegUjH8HtWg" />

@@ -165,7 +164,6 @@
           <AcmeProjectActionInfo Action="File" Source="hal/src/hal_calendar.c" IsConfig="false" Hash="lYVRpDSx+np+02xVeQ9HHQ" />

           <AcmeProjectActionInfo Action="File" Source="hal/src/hal_ext_irq.c" IsConfig="false" Hash="l6Jmb4zu10+HvXQ0Iej4dQ" />

           <AcmeProjectActionInfo Action="File" Source="hal/src/hal_pwm.c" IsConfig="false" Hash="BSJaZa+fyJkrV3upQM/zBw" />

-          <AcmeProjectActionInfo Action="File" Source="hal/src/hal_timer.c" IsConfig="false" Hash="F2MrEXhHq4umI9xpONnlGg" />

           <AcmeProjectActionInfo Action="File" Source="hal/utils/include/parts.h" IsConfig="false" Hash="WeBzxZ+YnHMwGm/905+44Q" />

           <AcmeProjectActionInfo Action="File" Source="hpl/adc/hpl_adc.c" IsConfig="false" Hash="7Fex3op00XgU9E7Lp0VEUg" />

           <AcmeProjectActionInfo Action="File" Source="hpl/adc/hpl_adc_base.h" IsConfig="false" Hash="19A6ERNtsVVhqvnpGbR3Lg" />

@@ -188,7 +186,7 @@
           <AcmeProjectActionInfo Action="File" Source="hpl/slcd/hpl_slcd_cm_14_seg_mapping.h" IsConfig="false" Hash="rYmxchucbzcdRRtphbbizw" />

           <AcmeProjectActionInfo Action="File" Source="hpl/slcd/hpl_slcd_cm_7_seg_mapping.h" IsConfig="false" Hash="hcaiqS+ibM0/3hPBICykuw" />

           <AcmeProjectActionInfo Action="File" Source="hpl/systick/hpl_systick.c" IsConfig="false" Hash="YYWQVH26EDBDzYTUwepAcA" />

-          <AcmeProjectActionInfo Action="File" Source="hpl/tc/hpl_tc.c" IsConfig="false" Hash="Cu7R+CLmxZgQ2gv6L3xHbQ" />

+          <AcmeProjectActionInfo Action="File" Source="hpl/tc/hpl_tc.c" IsConfig="false" Hash="q1uHBcnbo2uDnGnq/yDLUA" />

           <AcmeProjectActionInfo Action="File" Source="hpl/tc/hpl_tc_base.h" IsConfig="false" Hash="Eb0LuGB6ltGJO9QC3fi2Sw" />

           <AcmeProjectActionInfo Action="File" Source="hpl/tcc/hpl_tcc.c" IsConfig="false" Hash="NHgO5jvkjzWYJ00X3I85jQ" />

           <AcmeProjectActionInfo Action="File" Source="hpl/tcc/hpl_tcc.h" IsConfig="false" Hash="vHpM8WwxGAodLqLXX56hlg" />

@@ -206,9 +204,9 @@
           <AcmeProjectActionInfo Action="File" Source="config/hpl_sercom_config.h" IsConfig="true" Hash="x/EmsaDJwEm2EI8zXUSlWw" />

           <AcmeProjectActionInfo Action="File" Source="config/hpl_slcd_config.h" IsConfig="true" Hash="ErbI2VSUDy3ufREFJTO9Uw" />

           <AcmeProjectActionInfo Action="File" Source="config/hpl_systick_config.h" IsConfig="true" Hash="tlT3lNDKWFe82MiGWfQzcA" />

-          <AcmeProjectActionInfo Action="File" Source="config/hpl_tc_config.h" IsConfig="true" Hash="ttsCFzSNH+7C39wCjBDTKg" />

+          <AcmeProjectActionInfo Action="File" Source="config/hpl_tc_config.h" IsConfig="true" Hash="s9fqdoBaH2BH7Id2JoCHTg" />

           <AcmeProjectActionInfo Action="File" Source="config/hpl_tcc_config.h" IsConfig="true" Hash="5OifPvGmHqsckywrqS3ctQ" />

-          <AcmeProjectActionInfo Action="File" Source="config/peripheral_clk_config.h" IsConfig="true" Hash="6S9yz6YklqQ4b9txk3kYDw" />

+          <AcmeProjectActionInfo Action="File" Source="config/peripheral_clk_config.h" IsConfig="true" Hash="qGv3tsNPPKYSGfAxyoGOsg" />

         </AcmeActionInfos>

         <NonsecureFilesInfo />

       </AcmeProjectConfig>

@@ -602,9 +600,6 @@
     <Compile Include="hal\include\hal_sleep.h">

       <SubType>compile</SubType>

     </Compile>

-    <Compile Include="hal\include\hal_timer.h">

-      <SubType>compile</SubType>

-    </Compile>

     <Compile Include="hal\include\hpl_adc_async.h">

       <SubType>compile</SubType>

     </Compile>

@@ -743,9 +738,6 @@
     <Compile Include="hal\src\hal_sleep.c">

       <SubType>compile</SubType>

     </Compile>

-    <Compile Include="hal\src\hal_timer.c">

-      <SubType>compile</SubType>

-    </Compile>

     <Compile Include="hal\utils\include\compiler.h">

       <SubType>compile</SubType>

     </Compile>

@@ -1043,9 +1035,6 @@
     <None Include="hal\documentation\slcd_sync.rst">

       <SubType>compile</SubType>

     </None>

-    <None Include="hal\documentation\timer.rst">

-      <SubType>compile</SubType>

-    </None>

   </ItemGroup>

   <Import Project="$(AVRSTUDIO_EXE_PATH)\\Vs\\Compiler.targets" />

 </Project>
\ No newline at end of file
diff --git a/Smol Watch Project/My Project/driver_init.c b/Smol Watch Project/My Project/driver_init.c
index 39e68e84..510f4074 100644
--- a/Smol Watch Project/My Project/driver_init.c
+++ b/Smol Watch Project/My Project/driver_init.c
@@ -13,7 +13,6 @@
 
 #include <hpl_adc_base.h>
 
-struct timer_descriptor     TIMER_0;
 struct slcd_sync_descriptor SEGMENT_LCD_0;
 
 struct adc_sync_descriptor ADC_0;
@@ -159,19 +158,6 @@ void delay_driver_init(void)
 	delay_init(SysTick);
 }
 
-/**
- * \brief Timer initialization function
- *
- * Enables Timer peripheral, clocks and initializes Timer driver
- */
-void TIMER_0_init(void)
-{
-	hri_mclk_set_APBCMASK_TC0_bit(MCLK);
-	hri_gclk_write_PCHCTRL_reg(GCLK, TC0_GCLK_ID, CONF_GCLK_TC0_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos));
-
-	timer_init(&TIMER_0, TC0, _tc_get_timer());
-}
-
 void PWM_0_PORT_init(void)
 {
 
diff --git a/Smol Watch Project/My Project/driver_init.h b/Smol Watch Project/My Project/driver_init.h
index 99062100..1c11d10c 100644
--- a/Smol Watch Project/My Project/driver_init.h
+++ b/Smol Watch Project/My Project/driver_init.h
@@ -30,7 +30,6 @@ extern "C" {
 #include <hal_i2c_m_sync.h>
 
 #include <hal_delay.h>
-#include <hal_timer.h>
 #include <hpl_tc_base.h>
 #include <hal_pwm.h>
 #include <hpl_tc_base.h>
@@ -45,8 +44,6 @@ extern struct calendar_descriptor CALENDAR_0;
 
 extern struct i2c_m_sync_desc I2C_0;
 
-extern struct timer_descriptor TIMER_0;
-
 extern struct pwm_descriptor PWM_0;
 
 extern struct pwm_descriptor       PWM_1;
@@ -65,8 +62,6 @@ void I2C_0_PORT_init(void);
 
 void delay_driver_init(void);
 
-void TIMER_0_init(void);
-
 void PWM_0_PORT_init(void);
 void PWM_0_CLOCK_init(void);
 void PWM_0_init(void);
diff --git a/Smol Watch Project/My Project/examples/driver_examples.c b/Smol Watch Project/My Project/examples/driver_examples.c
index 122ac73f..19327003 100644
--- a/Smol Watch Project/My Project/examples/driver_examples.c
+++ b/Smol Watch Project/My Project/examples/driver_examples.c
@@ -97,33 +97,6 @@ void delay_example(void)
 	delay_ms(5000);
 }
 
-static struct timer_task TIMER_0_task1, TIMER_0_task2;
-
-/**
- * Example of using TIMER_0.
- */
-static void TIMER_0_task1_cb(const struct timer_task *const timer_task)
-{
-}
-
-static void TIMER_0_task2_cb(const struct timer_task *const timer_task)
-{
-}
-
-void TIMER_0_example(void)
-{
-	TIMER_0_task1.interval = 100;
-	TIMER_0_task1.cb       = TIMER_0_task1_cb;
-	TIMER_0_task1.mode     = TIMER_TASK_REPEAT;
-	TIMER_0_task2.interval = 200;
-	TIMER_0_task2.cb       = TIMER_0_task2_cb;
-	TIMER_0_task2.mode     = TIMER_TASK_REPEAT;
-
-	timer_add_task(&TIMER_0, &TIMER_0_task1);
-	timer_add_task(&TIMER_0, &TIMER_0_task2);
-	timer_start(&TIMER_0);
-}
-
 /**
  * Example of using PWM_0.
  */
diff --git a/Smol Watch Project/My Project/examples/driver_examples.h b/Smol Watch Project/My Project/examples/driver_examples.h
index 59627ca9..4295ca9f 100644
--- a/Smol Watch Project/My Project/examples/driver_examples.h
+++ b/Smol Watch Project/My Project/examples/driver_examples.h
@@ -22,8 +22,6 @@ void I2C_0_example(void);
 
 void delay_example(void);
 
-void TIMER_0_example(void);
-
 void PWM_0_example(void);
 
 void PWM_1_example(void);
diff --git a/Smol Watch Project/My Project/hal/documentation/timer.rst b/Smol Watch Project/My Project/hal/documentation/timer.rst
deleted file mode 100644
index c5ca63d1..00000000
--- a/Smol Watch Project/My Project/hal/documentation/timer.rst
+++ /dev/null
@@ -1,52 +0,0 @@
-============================
-The Timer driver (bare-bone)
-============================
-
-The Timer driver provides means for delayed and periodical function invocation.
-
-A timer task is a piece of code (function) executed at a specific time or periodically by the timer after the task has
-been added to the timers task queue. The execution delay or period is set in ticks, where one tick is defined as a
-configurable number of clock cycles in the hardware timer. Changing the number of clock cycles in a tick automatically
-changes execution delays and periods for all tasks in the timers task queue.
-
-A task has two operation modes, single-shot or repeating mode. In single-shot mode the task is removed from the task queue
-and then is executed once, in repeating mode the task reschedules itself automatically after it has executed based on
-the period set in the task configuration.
-In single-shot mode a task is removed from the task queue before its callback is invoked. It allows an application to
-reuse the memory of expired task in the callback.
-
-Each instance of the Timer driver supports infinite amount of timer tasks, only limited by the amount of RAM available.
-
-Features
---------
-* Initialization and de-initialization
-* Starting and stopping
-* Timer tasks - periodical invocation of functions
-* Changing and obtaining of the period of a timer
-
-Applications
-------------
-* Delayed and periodical function execution for middle-ware stacks and applications.
-
-Dependencies
-------------
-* Each instance of the driver requires separate hardware timer capable of generating periodic interrupt.
-
-Concurrency
------------
-The Timer driver is an interrupt driven driver.This means that the interrupt that triggers a task may occur during
-the process of adding or removing a task via the driver's API. In such case the interrupt processing is postponed
-until the task adding or removing is complete.
-
-The task queue is not protected from the access by interrupts not used by the driver. Due to this
-it is not recommended to add or remove a task from such interrupts: in case if a higher priority interrupt supersedes
-the driver's interrupt, adding or removing a task may cause unpredictable behavior of the driver.
-
-Limitations
------------
-* The driver is designed to work outside of an operating system environment, the task queue is therefore processed in interrupt context which may delay execution of other interrupts.
-* If there are a lot of frequently called interrupts with the priority higher than the driver's one, it may cause delay for triggering of a task.
-
-Knows issues and workarounds
-----------------------------
-Not applicable
diff --git a/Smol Watch Project/My Project/hal/include/hal_timer.h b/Smol Watch Project/My Project/hal/include/hal_timer.h
deleted file mode 100644
index 43a1ff47..00000000
--- a/Smol Watch Project/My Project/hal/include/hal_timer.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/**
- * \file
- *
- * \brief Timer task functionality declaration.
- *
- * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _HAL_TIMER_H_INCLUDED
-#define _HAL_TIMER_H_INCLUDED
-
-#include <utils_list.h>
-#include <hpl_timer.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \addtogroup doc_driver_hal_timer
- *
- * @{
- */
-
-/**
- * \brief Timer mode type
- */
-enum timer_task_mode { TIMER_TASK_ONE_SHOT, TIMER_TASK_REPEAT };
-
-/**
- * \brief Timer task descriptor
- *
- * The timer task descriptor forward declaration.
- */
-struct timer_task;
-
-/**
- * \brief Timer task callback function type
- */
-typedef void (*timer_cb_t)(const struct timer_task *const timer_task);
-
-/**
- * \brief Timer task structure
- */
-struct timer_task {
-	struct list_element elem;       /*! List element. */
-	uint32_t            time_label; /*! Absolute timer start time. */
-
-	uint32_t             interval; /*! Number of timer ticks before calling the task. */
-	timer_cb_t           cb;       /*! Function pointer to the task. */
-	enum timer_task_mode mode;     /*! Task mode: one shot or repeat. */
-};
-
-/**
- * \brief Timer structure
- */
-struct timer_descriptor {
-	struct _timer_device   device;
-	uint32_t               time;
-	struct list_descriptor tasks; /*! Timer tasks list. */
-	volatile uint8_t       flags;
-};
-
-/**
- * \brief Initialize timer
- *
- * This function initializes the given timer.
- * It checks if the given hardware is not initialized and if the given hardware
- * is permitted to be initialized.
- *
- * \param[out] descr A timer descriptor to initialize
- * \param[in] hw The pointer to the hardware instance
- * \param[in] func The pointer to a set of function pointers
- *
- * \return Initialization status.
- */
-int32_t timer_init(struct timer_descriptor *const descr, void *const hw, struct _timer_hpl_interface *const func);
-
-/**
- * \brief Deinitialize timer
- *
- * This function deinitializes the given timer.
- * It checks if the given hardware is initialized and if the given hardware is
- * permitted to be deinitialized.
- *
- * \param[in] descr A timer descriptor to deinitialize
- *
- * \return De-initialization status.
- */
-int32_t timer_deinit(struct timer_descriptor *const descr);
-
-/**
- * \brief Start timer
- *
- * This function starts the given timer.
- * It checks if the given hardware is initialized.
- *
- * \param[in] descr The timer descriptor of a timer to start
- *
- * \return Timer starting status.
- */
-int32_t timer_start(struct timer_descriptor *const descr);
-
-/**
- * \brief Stop timer
- *
- * This function stops the given timer.
- * It checks if the given hardware is initialized.
- *
- * \param[in] descr The timer descriptor of a timer to stop
- *
- * \return Timer stopping status.
- */
-int32_t timer_stop(struct timer_descriptor *const descr);
-
-/**
- * \brief Set amount of clock cycles per timer tick
- *
- * This function sets the amount of clock cycles per timer tick for the given timer.
- * It checks if the given hardware is initialized.
- *
- * \param[in] descr The timer descriptor of a timer to stop
- * \param[in] clock_cycles The amount of clock cycles per tick to set
- *
- * \return Setting clock cycles amount status.
- */
-int32_t timer_set_clock_cycles_per_tick(struct timer_descriptor *const descr, const uint32_t clock_cycles);
-
-/**
- * \brief Retrieve the amount of clock cycles in a tick
- *
- * This function retrieves how many clock cycles there are in a single timer tick.
- * It checks if the given hardware is initialized.
- *
- * \param[in]  descr The timer descriptor of a timer to convert ticks to
- * clock cycles
- * \param[out] cycles The amount of clock cycles
- *
- * \return The status of clock cycles retrieving.
- */
-int32_t timer_get_clock_cycles_in_tick(const struct timer_descriptor *const descr, uint32_t *const cycles);
-
-/**
- * \brief Add timer task
- *
- * This function adds the given timer task to the given timer.
- * It checks if the given hardware is initialized.
- *
- * \param[in] descr The timer descriptor of a timer to add task to
- * \param[in] task A task to add
- *
- * \return Timer's task adding status.
- */
-int32_t timer_add_task(struct timer_descriptor *const descr, struct timer_task *const task);
-
-/**
- * \brief Remove timer task
- *
- * This function removes the given timer task from the given timer.
- * It checks if the given hardware is initialized.
- *
- * \param[in] descr The timer descriptor of a timer to remove task from
- * \param[in] task A task to remove
- *
- * \return Timer's task removing status.
- */
-int32_t timer_remove_task(struct timer_descriptor *const descr, const struct timer_task *const task);
-
-/**
- * \brief Retrieve the current driver version
- *
- * \return Current driver version.
- */
-uint32_t timer_get_version(void);
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _HAL_TIMER_H_INCLUDED */
diff --git a/Smol Watch Project/My Project/hal/src/hal_timer.c b/Smol Watch Project/My Project/hal/src/hal_timer.c
deleted file mode 100644
index 565c6db1..00000000
--- a/Smol Watch Project/My Project/hal/src/hal_timer.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/**
- * \file
- *
- * \brief Timer functionality implementation.
- *
- * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- *
- */
-
-#include "hal_timer.h"
-#include <utils_assert.h>
-#include <utils.h>
-#include <hal_atomic.h>
-#include <hpl_irq.h>
-
-/**
- * \brief Driver version
- */
-#define DRIVER_VERSION 0x00000001u
-
-/**
- * \brief Timer flags
- */
-#define TIMER_FLAG_QUEUE_IS_TAKEN 1
-#define TIMER_FLAG_INTERRUPT_TRIGERRED 2
-
-static void timer_add_timer_task(struct list_descriptor *list, struct timer_task *const new_task, const uint32_t time);
-static void timer_process_counted(struct _timer_device *device);
-
-/**
- * \brief Initialize timer
- */
-int32_t timer_init(struct timer_descriptor *const descr, void *const hw, struct _timer_hpl_interface *const func)
-{
-	ASSERT(descr && hw);
-	_timer_init(&descr->device, hw);
-	descr->time                           = 0;
-	descr->device.timer_cb.period_expired = timer_process_counted;
-
-	return ERR_NONE;
-}
-
-/**
- * \brief Deinitialize timer
- */
-int32_t timer_deinit(struct timer_descriptor *const descr)
-{
-	ASSERT(descr);
-	_timer_deinit(&descr->device);
-
-	return ERR_NONE;
-}
-
-/**
- * \brief Start timer
- */
-int32_t timer_start(struct timer_descriptor *const descr)
-{
-	ASSERT(descr);
-	if (_timer_is_started(&descr->device)) {
-		return ERR_DENIED;
-	}
-	_timer_start(&descr->device);
-
-	return ERR_NONE;
-}
-
-/**
- * \brief Stop timer
- */
-int32_t timer_stop(struct timer_descriptor *const descr)
-{
-	ASSERT(descr);
-	if (!_timer_is_started(&descr->device)) {
-		return ERR_DENIED;
-	}
-	_timer_stop(&descr->device);
-
-	return ERR_NONE;
-}
-
-/**
- * \brief Set amount of clock cycler per timer tick
- */
-int32_t timer_set_clock_cycles_per_tick(struct timer_descriptor *const descr, const uint32_t clock_cycles)
-{
-	ASSERT(descr);
-	_timer_set_period(&descr->device, clock_cycles);
-
-	return ERR_NONE;
-}
-
-/**
- * \brief Add timer task
- */
-int32_t timer_add_task(struct timer_descriptor *const descr, struct timer_task *const task)
-{
-	ASSERT(descr && task);
-
-	descr->flags |= TIMER_FLAG_QUEUE_IS_TAKEN;
-	if (is_list_element(&descr->tasks, task)) {
-		descr->flags &= ~TIMER_FLAG_QUEUE_IS_TAKEN;
-		ASSERT(false);
-		return ERR_ALREADY_INITIALIZED;
-	}
-	task->time_label = descr->time;
-	timer_add_timer_task(&descr->tasks, task, descr->time);
-
-	descr->flags &= ~TIMER_FLAG_QUEUE_IS_TAKEN;
-	if (descr->flags & TIMER_FLAG_INTERRUPT_TRIGERRED) {
-		CRITICAL_SECTION_ENTER()
-		descr->flags &= ~TIMER_FLAG_INTERRUPT_TRIGERRED;
-		_timer_set_irq(&descr->device);
-		CRITICAL_SECTION_LEAVE()
-	}
-
-	return ERR_NONE;
-}
-
-/**
- * \brief Remove timer task
- */
-int32_t timer_remove_task(struct timer_descriptor *const descr, const struct timer_task *const task)
-{
-	ASSERT(descr && task);
-
-	descr->flags |= TIMER_FLAG_QUEUE_IS_TAKEN;
-	if (!is_list_element(&descr->tasks, task)) {
-		descr->flags &= ~TIMER_FLAG_QUEUE_IS_TAKEN;
-		ASSERT(false);
-		return ERR_NOT_FOUND;
-	}
-	list_delete_element(&descr->tasks, task);
-
-	descr->flags &= ~TIMER_FLAG_QUEUE_IS_TAKEN;
-	if (descr->flags & TIMER_FLAG_INTERRUPT_TRIGERRED) {
-		CRITICAL_SECTION_ENTER()
-		descr->flags &= ~TIMER_FLAG_INTERRUPT_TRIGERRED;
-		_timer_set_irq(&descr->device);
-		CRITICAL_SECTION_LEAVE()
-	}
-
-	return ERR_NONE;
-}
-
-/**
- * \brief Retrieve the amount of clock cycles in a tick
- */
-int32_t timer_get_clock_cycles_in_tick(const struct timer_descriptor *const descr, uint32_t *const cycles)
-{
-	ASSERT(descr && cycles);
-	*cycles = _timer_get_period(&descr->device);
-	return ERR_NONE;
-}
-
-/**
- * \brief Retrieve the current driver version
- */
-uint32_t timer_get_version(void)
-{
-	return DRIVER_VERSION;
-}
-
-/**
- * \internal Insert a timer task into sorted timer's list
- *
- * \param[in] head The pointer to the head of timer task list
- * \param[in] task The pointer to task to add
- * \param[in] time Current timer time
- */
-static void timer_add_timer_task(struct list_descriptor *list, struct timer_task *const new_task, const uint32_t time)
-{
-	struct timer_task *it, *prev = NULL, *head = (struct timer_task *)list_get_head(list);
-
-	if (!head) {
-		list_insert_as_head(list, new_task);
-		return;
-	}
-
-	for (it = head; it; it = (struct timer_task *)list_get_next_element(it)) {
-		uint32_t time_left;
-
-		if (it->time_label <= time) {
-			time_left = it->interval - (time - it->time_label);
-		} else {
-			time_left = it->interval - (0xFFFFFFFF - it->time_label) - time;
-		}
-		if (time_left >= new_task->interval)
-			break;
-		prev = it;
-	}
-
-	if (it == head) {
-		list_insert_as_head(list, new_task);
-	} else {
-		list_insert_after(prev, new_task);
-	}
-}
-
-/**
- * \internal Process interrupts
- */
-static void timer_process_counted(struct _timer_device *device)
-{
-	struct timer_descriptor *timer = CONTAINER_OF(device, struct timer_descriptor, device);
-	struct timer_task *      it    = (struct timer_task *)list_get_head(&timer->tasks);
-	uint32_t                 time  = ++timer->time;
-
-	if ((timer->flags & TIMER_FLAG_QUEUE_IS_TAKEN) || (timer->flags & TIMER_FLAG_INTERRUPT_TRIGERRED)) {
-		timer->flags |= TIMER_FLAG_INTERRUPT_TRIGERRED;
-		return;
-	}
-
-	while (it && ((time - it->time_label) >= it->interval)) {
-		struct timer_task *tmp = it;
-
-		list_remove_head(&timer->tasks);
-		if (TIMER_TASK_REPEAT == tmp->mode) {
-			tmp->time_label = time;
-			timer_add_timer_task(&timer->tasks, tmp, time);
-		}
-		it = (struct timer_task *)list_get_head(&timer->tasks);
-
-		tmp->cb(tmp);
-	}
-}
diff --git a/Smol Watch Project/My Project/hpl/rtc/hpl_rtc.c b/Smol Watch Project/My Project/hpl/rtc/hpl_rtc.c
index 2369a03a..c28ddec6 100644
--- a/Smol Watch Project/My Project/hpl/rtc/hpl_rtc.c
+++ b/Smol Watch Project/My Project/hpl/rtc/hpl_rtc.c
@@ -316,10 +316,10 @@ int32_t _tamper_register_callback(struct calendar_dev *const dev, tamper_drv_cb_
 		NVIC_EnableIRQ(RTC_IRQn);
 
 		/* enable tamper interrupt */
-		hri_rtcmode0_set_INTEN_TAMPER_bit(dev->hw);
+		hri_rtcmode0_set_INTEN_PER7_bit(dev->hw);
 	} else {
 		/* disable tamper interrupt */
-		hri_rtcmode0_clear_INTEN_TAMPER_bit(dev->hw);
+		hri_rtcmode0_clear_INTEN_PER7_bit(dev->hw);
 
 		/* disable RTC_IRQn */
 		NVIC_DisableIRQ(RTC_IRQn);
@@ -372,11 +372,11 @@ static void _rtc_interrupt_handler(struct calendar_dev *dev)
 
 		/* Clear interrupt flag */
 		hri_rtcmode0_clear_interrupt_CMP0_bit(dev->hw);
-	} else if ((interrupt_status & interrupt_enabled) & RTC_MODE2_INTFLAG_TAMPER) {
+	} else if ((interrupt_status & interrupt_enabled) & RTC_MODE2_INTFLAG_PER7) {
 		dev->callback_tamper(dev);
 
 		/* Clear interrupt flag */
-		hri_rtcmode0_clear_interrupt_TAMPER_bit(dev->hw);
+		hri_rtcmode0_clear_interrupt_PER7_bit(dev->hw);
 	}
 }
 /**
diff --git a/Smol Watch Project/My Project/hpl/tc/hpl_tc.c b/Smol Watch Project/My Project/hpl/tc/hpl_tc.c
index 362977a0..38fa8938 100644
--- a/Smol Watch Project/My Project/hpl/tc/hpl_tc.c
+++ b/Smol Watch Project/My Project/hpl/tc/hpl_tc.c
@@ -139,60 +139,12 @@ static struct _pwm_hpl_interface _tc_pwm_functions = {
     _tc_pwm_set_irq_state,
 };
 
-static struct _timer_device *_tc0_dev = NULL;
-
 static struct _pwm_device *_tc3_dev = NULL;
 
 static int8_t         get_tc_index(const void *const hw);
 static void           _tc_init_irq_param(const void *const hw, void *dev);
 static inline uint8_t _get_hardware_offset(const void *const hw);
 /**
- * \brief Initialize TC
- */
-int32_t _timer_init(struct _timer_device *const device, void *const hw)
-{
-	int8_t i = get_tc_index(hw);
-
-	device->hw = hw;
-	ASSERT(ARRAY_SIZE(_tcs));
-
-	if (!hri_tc_is_syncing(hw, TC_SYNCBUSY_SWRST)) {
-		if (hri_tc_get_CTRLA_reg(hw, TC_CTRLA_ENABLE)) {
-			hri_tc_clear_CTRLA_ENABLE_bit(hw);
-			hri_tc_wait_for_sync(hw, TC_SYNCBUSY_ENABLE);
-		}
-		hri_tc_write_CTRLA_reg(hw, TC_CTRLA_SWRST);
-	}
-	hri_tc_wait_for_sync(hw, TC_SYNCBUSY_SWRST);
-
-	hri_tc_write_CTRLA_reg(hw, _tcs[i].ctrl_a);
-	hri_tc_write_DBGCTRL_reg(hw, _tcs[i].dbg_ctrl);
-	hri_tc_write_EVCTRL_reg(hw, _tcs[i].event_ctrl);
-	hri_tc_write_WAVE_reg(hw, TC_WAVE_WAVEGEN_MFRQ);
-
-	if ((_tcs[i].ctrl_a & TC_CTRLA_MODE_Msk) == TC_CTRLA_MODE_COUNT32) {
-		hri_tccount32_write_CC_reg(hw, 0, _tcs[i].cc0);
-		hri_tccount32_write_CC_reg(hw, 1, _tcs[i].cc1);
-
-	} else if ((_tcs[i].ctrl_a & TC_CTRLA_MODE_Msk) == TC_CTRLA_MODE_COUNT16) {
-		hri_tccount16_write_CC_reg(hw, 0, (uint16_t)_tcs[i].cc0);
-		hri_tccount16_write_CC_reg(hw, 1, (uint16_t)_tcs[i].cc1);
-
-	} else if ((_tcs[i].ctrl_a & TC_CTRLA_MODE_Msk) == TC_CTRLA_MODE_COUNT8) {
-		hri_tccount8_write_CC_reg(hw, 0, (uint8_t)_tcs[i].cc0);
-		hri_tccount8_write_CC_reg(hw, 1, (uint8_t)_tcs[i].cc1);
-		hri_tccount8_write_PER_reg(hw, _tcs[i].per);
-	}
-	hri_tc_set_INTEN_OVF_bit(hw);
-
-	_tc_init_irq_param(hw, (void *)device);
-	NVIC_DisableIRQ(_tcs[i].irq);
-	NVIC_ClearPendingIRQ(_tcs[i].irq);
-	NVIC_EnableIRQ(_tcs[i].irq);
-
-	return ERR_NONE;
-}
-/**
  * \brief Initialize TC for PWM mode
  */
 int32_t _tc_pwm_init(struct _pwm_device *const device, void *const hw)
@@ -233,20 +185,6 @@ int32_t _tc_pwm_init(struct _pwm_device *const device, void *const hw)
 	return 0;
 }
 /**
- * \brief De-initialize TC
- */
-void _timer_deinit(struct _timer_device *const device)
-{
-	void *const hw = device->hw;
-	int8_t      i  = get_tc_index(hw);
-	ASSERT(ARRAY_SIZE(_tcs));
-
-	NVIC_DisableIRQ(_tcs[i].irq);
-
-	hri_tc_clear_CTRLA_ENABLE_bit(hw);
-	hri_tc_set_CTRLA_SWRST_bit(hw);
-}
-/**
  * \brief De-initialize TC for PWM mode
  */
 void _tc_pwm_deinit(struct _pwm_device *const device)
@@ -261,13 +199,6 @@ void _tc_pwm_deinit(struct _pwm_device *const device)
 	hri_tc_set_CTRLA_SWRST_bit(hw);
 }
 /**
- * \brief Start hardware timer
- */
-void _timer_start(struct _timer_device *const device)
-{
-	hri_tc_set_CTRLA_ENABLE_bit(device->hw);
-}
-/**
  * \brief Start PWM
  */
 void _tc_start_pwm(struct _pwm_device *const device)
@@ -275,13 +206,6 @@ void _tc_start_pwm(struct _pwm_device *const device)
 	hri_tc_set_CTRLA_ENABLE_bit(device->hw);
 }
 /**
- * \brief Stop hardware timer
- */
-void _timer_stop(struct _timer_device *const device)
-{
-	hri_tc_clear_CTRLA_ENABLE_bit(device->hw);
-}
-/**
  * \brief Stop PWM
  */
 void _tc_stop_pwm(struct _pwm_device *const device)
@@ -289,21 +213,6 @@ void _tc_stop_pwm(struct _pwm_device *const device)
 	hri_tc_clear_CTRLA_ENABLE_bit(device->hw);
 }
 /**
- * \brief Set timer period
- */
-void _timer_set_period(struct _timer_device *const device, const uint32_t clock_cycles)
-{
-	void *const hw = device->hw;
-
-	if (TC_CTRLA_MODE_COUNT32_Val == hri_tc_read_CTRLA_MODE_bf(hw)) {
-		hri_tccount32_write_CC_reg(hw, 0, clock_cycles);
-	} else if (TC_CTRLA_MODE_COUNT16_Val == hri_tc_read_CTRLA_MODE_bf(hw)) {
-		hri_tccount16_write_CC_reg(hw, 0, (uint16_t)clock_cycles);
-	} else if (TC_CTRLA_MODE_COUNT8_Val == hri_tc_read_CTRLA_MODE_bf(hw)) {
-		hri_tccount8_write_PER_reg(hw, clock_cycles);
-	}
-}
-/**
  * \brief Set PWM parameter
  */
 void _tc_set_pwm_param(struct _pwm_device *const device, const pwm_period_t period, const pwm_period_t duty_cycle)
@@ -356,30 +265,6 @@ uint32_t _tc_pwm_get_duty(const struct _pwm_device *const device)
 	return ((duty_cycle * 1000) / per);
 }
 /**
- * \brief Retrieve timer period
- */
-uint32_t _timer_get_period(const struct _timer_device *const device)
-{
-	void *const hw = device->hw;
-
-	if (TC_CTRLA_MODE_COUNT32_Val == hri_tc_read_CTRLA_MODE_bf(hw)) {
-		return hri_tccount32_read_CC_reg(hw, 0);
-	} else if (TC_CTRLA_MODE_COUNT16_Val == hri_tc_read_CTRLA_MODE_bf(hw)) {
-		return hri_tccount16_read_CC_reg(hw, 0);
-	} else if (TC_CTRLA_MODE_COUNT8_Val == hri_tc_read_CTRLA_MODE_bf(hw)) {
-		return hri_tccount8_read_PER_reg(hw);
-	}
-
-	return 0;
-}
-/**
- * \brief Check if timer is running
- */
-bool _timer_is_started(const struct _timer_device *const device)
-{
-	return hri_tc_get_CTRLA_ENABLE_bit(device->hw);
-}
-/**
  * \brief Check if PWM is running
  */
 bool _tc_is_pwm_enabled(const struct _pwm_device *const device)
@@ -416,33 +301,6 @@ struct _pwm_hpl_interface *_tc_get_pwm(void)
 	return &_tc_pwm_functions;
 }
 /**
- * \brief Set timer IRQ
- *
- * \param[in] hw The pointer to hardware instance
- */
-void _timer_set_irq(struct _timer_device *const device)
-{
-	void *const hw = device->hw;
-	int8_t      i  = get_tc_index(hw);
-	ASSERT(ARRAY_SIZE(_tcs));
-
-	_irq_set(_tcs[i].irq);
-}
-/**
- * \internal TC interrupt handler for Timer
- *
- * \param[in] instance TC instance number
- */
-static void tc_interrupt_handler(struct _timer_device *device)
-{
-	void *const hw = device->hw;
-
-	if (hri_tc_get_interrupt_OVF_bit(hw)) {
-		hri_tc_clear_interrupt_OVF_bit(hw);
-		device->timer_cb.period_expired(device);
-	}
-}
-/**
  * \internal TC interrupt handler for PWM
  *
  * \param[in] instance TC instance number
@@ -468,14 +326,6 @@ static void tc_pwm_interrupt_handler(struct _pwm_device *device)
 /**
  * \brief TC interrupt handler
  */
-void TC0_Handler(void)
-{
-	tc_interrupt_handler(_tc0_dev);
-}
-
-/**
- * \brief TC interrupt handler
- */
 void TC3_Handler(void)
 {
 	tc_pwm_interrupt_handler(_tc3_dev);
@@ -508,9 +358,6 @@ static int8_t get_tc_index(const void *const hw)
  */
 static void _tc_init_irq_param(const void *const hw, void *dev)
 {
-	if (hw == TC0) {
-		_tc0_dev = (struct _timer_device *)dev;
-	}
 	if (hw == TC3) {
 		_tc3_dev = (struct _pwm_device *)dev;
 	}
diff --git a/Smol Watch Project/My Project/main.c b/Smol Watch Project/My Project/main.c
index 19fddb2f..45bb5dc0 100644
--- a/Smol Watch Project/My Project/main.c
+++ b/Smol Watch Project/My Project/main.c
@@ -29,9 +29,11 @@ static void light_callback() {
 static void alarm_callback() {
 }
 
+int lightOn = 0;
+
 static void tick_callback() {
-	gpio_set_pin_level(GREEN, true);
-	gpio_set_pin_level(GREEN, false);
+	gpio_set_pin_level(GREEN, lightOn == 0);
+	lightOn = (lightOn + 1) % 10;
 }
 
 int main(void)
@@ -55,8 +57,6 @@ int main(void)
 	watch_register_button_callback(&watch, BTN_ALARM, &alarm_callback);
 	watch_register_button_callback(&watch, BTN_LIGHT, &light_callback);
 
-	watch_enable_tick(tick_callback);
-/*
 	watch_enable_date_time(&watch);
 	struct calendar_date_time date_time;
 	date_time.date.year = 2021;
@@ -74,7 +74,8 @@ int main(void)
 	alarm.callback = calendar_callback;
 	update_display(&watch, date_time);
 	calendar_set_alarm(&CALENDAR_0, &alarm, &calendar_callback);
-*/
+	watch_enable_tick(tick_callback);
+
 	while (1) {
 		sleep(2);
 	}
diff --git a/Smol Watch Project/My Project/watch-library/watch.c b/Smol Watch Project/My Project/watch-library/watch.c
index 36608cdb..69eacde9 100644
--- a/Smol Watch Project/My Project/watch-library/watch.c
+++ b/Smol Watch Project/My Project/watch-library/watch.c
@@ -239,22 +239,14 @@ void watch_get_date_time(struct calendar_date_time *date_time) {
 

 static ext_irq_cb_t tick_user_callback;

 

-static void tick_callback(const struct timer_task *const timer_task) {
+static void tick_callback(struct calendar_dev *const dev) {
 	tick_user_callback();
 }
 
-static struct timer_task tick_task;
-
 void watch_enable_tick(ext_irq_cb_t callback) {
-	TIMER_0_init();
-
-	tick_task.interval = 16384;
-	tick_task.cb = tick_callback;
-	tick_task.mode = TIMER_TASK_REPEAT;
 	tick_user_callback = callback;
-
-	timer_add_task(&TIMER_0, &tick_task);
-	timer_start(&TIMER_0);
+	// TODO: rename this method to reflect that it now sets the PER7 interrupt.
+	_tamper_register_callback(&CALENDAR_0.device, &tick_callback);
 }

 

 void watch_enable_analog(Watch *watch, const uint8_t pin) {

diff --git a/Smol Watch Project/My Project/watch-library/watch.h b/Smol Watch Project/My Project/watch-library/watch.h
index 1b50251f..860102f9 100644
--- a/Smol Watch Project/My Project/watch-library/watch.h
+++ b/Smol Watch Project/My Project/watch-library/watch.h
@@ -11,9 +11,6 @@
 #include <stdint.h>

 #include "hpl_calendar.h"

 #include "hal_ext_irq.h"

-#include "hal_timer.h"

-

-typedef void (*watch_tick_cb)(void);

 

 typedef struct Watch {

 	bool display_enabled;