remove tinyusb directory

19 files changed, 0 insertions, 1191 deletions

diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt b/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt
deleted file mode 100755
index 639dde99..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-# TOP is absolute path to root directory of TinyUSB git repo
-# needed for esp32sx build. TOOD could be removed later on
-set(TOP "../../..")
-get_filename_component(TOP "${TOP}" REALPATH)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-# Check for -DFAMILY=
-if(FAMILY MATCHES "^esp32s[2-3]")
-else()
-  message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
-endif()
diff --git a/tinyusb/examples/device/cdc_msc_freertos/Makefile b/tinyusb/examples/device/cdc_msc_freertos/Makefile
deleted file mode 100755
index 86bacd2d..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-DEPS_SUBMODULES += lib/FreeRTOS-Kernel
-
-include ../../../tools/top.mk
-include ../../make.mk
-
-FREERTOS_SRC = lib/FreeRTOS-Kernel
-
-INC += \
-	src \
-	$(TOP)/hw \
-	$(TOP)/$(FREERTOS_SRC)/include \
-	$(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)
-	
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-# FreeRTOS source, all files in port folder
-SRC_C += \
-	$(FREERTOS_SRC)/list.c \
-	$(FREERTOS_SRC)/queue.c \
-	$(FREERTOS_SRC)/tasks.c \
-	$(FREERTOS_SRC)/timers.c \
-	$(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c))
-
-# FreeRTOS (lto + Os) linker issue
-LDFLAGS += -Wl,--undefined=vTaskSwitchContext
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults b/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults
deleted file mode 100755
index 83871619..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_IDF_CMAKE=y
-CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
-CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt b/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt
deleted file mode 100755
index 6b188fd3..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-idf_component_register(SRCS "main.c" "usb_descriptors.c" "msc_disk.c"
-                    INCLUDE_DIRS "."
-                    REQUIRES freertos soc)
-
-file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake)
-
-if(EXISTS ${board_cmake})
-    include(${board_cmake})
-endif()
-
-idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH)
-target_include_directories(${COMPONENT_TARGET} PUBLIC
-  "${FREERTOS_ORIG_INCLUDE_PATH}"
-  "${TOP}/hw"
-  "${TOP}/src"
-)
-
-target_sources(${COMPONENT_TARGET} PUBLIC
-  "${TOP}/src/tusb.c"
-  "${TOP}/src/common/tusb_fifo.c"
-  "${TOP}/src/device/usbd.c"
-  "${TOP}/src/device/usbd_control.c"
-  "${TOP}/src/class/cdc/cdc_device.c"
-  "${TOP}/src/class/dfu/dfu_rt_device.c"
-  "${TOP}/src/class/hid/hid_device.c"
-  "${TOP}/src/class/midi/midi_device.c"
-  "${TOP}/src/class/msc/msc_device.c"
-  "${TOP}/src/class/net/net_device.c"
-  "${TOP}/src/class/usbtmc/usbtmc_device.c"
-  "${TOP}/src/class/vendor/vendor_device.c"
-  "${TOP}/src/portable/espressif/esp32sx/dcd_esp32sx.c"
-)
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h b/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h
deleted file mode 100755
index 568b27a1..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * FreeRTOS Kernel V10.0.0
- * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software. If you wish to use our Amazon
- * FreeRTOS name, please do so in a fair use way that does not cause confusion.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
- *
- * See http://www.freertos.org/a00110.html.
- *----------------------------------------------------------*/
-
-// Include MCU header
-#include "bsp/board_mcu.h"
-
-extern uint32_t SystemCoreClock;
-
-/* Cortex M23/M33 port configuration. */
-#define configENABLE_MPU								        0
-#define configENABLE_FPU								        1
-#define configENABLE_TRUSTZONE					        0
-#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
-
-#define configUSE_PREEMPTION                    1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
-#define configCPU_CLOCK_HZ                      SystemCoreClock
-#define configTICK_RATE_HZ                      ( 1000 )
-#define configMAX_PRIORITIES                    ( 5 )
-#define configMINIMAL_STACK_SIZE                ( 128 )
-#define configTOTAL_HEAP_SIZE                   ( 0*1024 ) // dynamic is not used
-#define configMAX_TASK_NAME_LEN                 16
-#define configUSE_16_BIT_TICKS                  0
-#define configIDLE_SHOULD_YIELD                 1
-#define configUSE_MUTEXES                       1
-#define configUSE_RECURSIVE_MUTEXES             1
-#define configUSE_COUNTING_SEMAPHORES           1
-#define configQUEUE_REGISTRY_SIZE               2
-#define configUSE_QUEUE_SETS                    0
-#define configUSE_TIME_SLICING                  0
-#define configUSE_NEWLIB_REENTRANT              0
-#define configENABLE_BACKWARD_COMPATIBILITY     1
-#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
-
-#define configSUPPORT_STATIC_ALLOCATION         1
-#define configSUPPORT_DYNAMIC_ALLOCATION        0
-
-/* Hook function related definitions. */
-#define configUSE_IDLE_HOOK                    0
-#define configUSE_TICK_HOOK                    0
-#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
-#define configCHECK_FOR_STACK_OVERFLOW         2
-
-/* Run time and task stats gathering related definitions. */
-#define configGENERATE_RUN_TIME_STATS          0
-#define configUSE_TRACE_FACILITY               1 // legacy trace
-#define configUSE_STATS_FORMATTING_FUNCTIONS   0
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                  0
-#define configMAX_CO_ROUTINE_PRIORITIES        2
-
-/* Software timer related definitions. */
-#define configUSE_TIMERS                       1
-#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
-#define configTIMER_QUEUE_LENGTH               32
-#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
-
-/* Optional functions - most linkers will remove unused functions anyway. */
-#define INCLUDE_vTaskPrioritySet               0
-#define INCLUDE_uxTaskPriorityGet              0
-#define INCLUDE_vTaskDelete                    0
-#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
-#define INCLUDE_xResumeFromISR                 0
-#define INCLUDE_vTaskDelayUntil                1
-#define INCLUDE_vTaskDelay                     1
-#define INCLUDE_xTaskGetSchedulerState         0
-#define INCLUDE_xTaskGetCurrentTaskHandle      0
-#define INCLUDE_uxTaskGetStackHighWaterMark    0
-#define INCLUDE_xTaskGetIdleTaskHandle         0
-#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
-#define INCLUDE_pcTaskGetTaskName              0
-#define INCLUDE_eTaskGetState                  0
-#define INCLUDE_xEventGroupSetBitFromISR       0
-#define INCLUDE_xTimerPendFunctionCall         0
-
-/* Define to trap errors during development. */
-// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
-#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
-  #define configASSERT(_exp) \
-    do {\
-      if ( !(_exp) ) { \
-        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
-        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
-          taskDISABLE_INTERRUPTS(); \
-           __asm("BKPT #0\n"); \
-        }\
-      }\
-    } while(0)
-#else
-  #define configASSERT( x )
-#endif
-
-#ifdef __RX__
-/* Renesas RX series */
-#define vSoftwareInterruptISR					INT_Excep_ICU_SWINT
-#define vTickISR								INT_Excep_CMT0_CMI0
-#define configPERIPHERAL_CLOCK_HZ				(configCPU_CLOCK_HZ/2)
-#define configKERNEL_INTERRUPT_PRIORITY			1
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
-
-#else
-
-/* FreeRTOS hooks to NVIC vectors */
-#define xPortPendSVHandler    PendSV_Handler
-#define xPortSysTickHandler   SysTick_Handler
-#define vPortSVCHandler       SVC_Handler
-
-//--------------------------------------------------------------------+
-// Interrupt nesting behavior configuration.
-//--------------------------------------------------------------------+
-#if defined(__NVIC_PRIO_BITS)
-  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
-	#define configPRIO_BITS       __NVIC_PRIO_BITS
-#elif defined(__ECLIC_INTCTLBITS)
-  // RISC-V Bumblebee core from nuclei
-  #define configPRIO_BITS       __ECLIC_INTCTLBITS
-#else
-  #error "FreeRTOS configPRIO_BITS to be defined"
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-#endif
-
-#endif /* __FREERTOS_CONFIG__H */
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c b/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c
deleted file mode 100755
index ab885947..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-//--------------------------------------------------------------------+
-// INCLUDE
-//--------------------------------------------------------------------+
-#include "FreeRTOS.h"
-#include "task.h"
-#include "common/tusb_common.h"
-
-
-void vApplicationMallocFailedHook(void)
-{
-  taskDISABLE_INTERRUPTS();
-  TU_ASSERT(false, );
-}
-
-void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName)
-{
-  (void) pxTask;
-  (void) pcTaskName;
-
-  taskDISABLE_INTERRUPTS();
-  TU_ASSERT(false, );
-}
-
-/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
- * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
- * used by the Idle task. */
-void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize )
-{
-  /* If the buffers to be provided to the Idle task are declared inside this
-   * function then they must be declared static - otherwise they will be allocated on
-   * the stack and so not exists after this function exits. */
-  static StaticTask_t xIdleTaskTCB;
-  static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ];
-
-  /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
-    state will be stored. */
-  *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
-
-  /* Pass out the array that will be used as the Idle task's stack. */
-  *ppxIdleTaskStackBuffer = uxIdleTaskStack;
-
-  /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
-    Note that, as the array is necessarily of type StackType_t,
-    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
-  *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
-}
-
-/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
- * application must provide an implementation of vApplicationGetTimerTaskMemory()
- * to provide the memory that is used by the Timer service task. */
-void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize )
-{
-  /* If the buffers to be provided to the Timer task are declared inside this
-   * function then they must be declared static - otherwise they will be allocated on
-   * the stack and so not exists after this function exits. */
-  static StaticTask_t xTimerTaskTCB;
-  static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ];
-
-  /* Pass out a pointer to the StaticTask_t structure in which the Timer
-    task's state will be stored. */
-  *ppxTimerTaskTCBBuffer = &xTimerTaskTCB;
-
-  /* Pass out the array that will be used as the Timer task's stack. */
-  *ppxTimerTaskStackBuffer = uxTimerTaskStack;
-
-  /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.
-    Note that, as the array is necessarily of type StackType_t,
-    configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */
-  *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
-}
-
-#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X
-#include "iodefine.h"
-void vApplicationSetupTimerInterrupt(void)
-{
-  /* Enable CMT0 */
-  SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1);
-  MSTP(CMT0)       = 0;
-  SYSTEM.PRCR.WORD = (0xA5u<<8);
-
-  CMT0.CMCNT      = 0;
-  CMT0.CMCOR      = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128);
-  CMT0.CMCR.WORD  = TU_BIT(6) | 2;
-  IR(CMT0, CMI0)  = 0;
-  IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY;
-  IEN(CMT0, CMI0) = 1;
-  CMT.CMSTR0.BIT.STR0 = 1;
-}
-#endif
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/main.c b/tinyusb/examples/device/cdc_msc_freertos/src/main.c
deleted file mode 100755
index c27b7fed..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/main.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "FreeRTOS.h"
-#include "task.h"
-#include "timers.h"
-#include "queue.h"
-#include "semphr.h"
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-// static timer
-StaticTimer_t blinky_tmdef;
-TimerHandle_t blinky_tm;
-
-// static task for usbd
-// Increase stack size when debug log is enabled
-#if CFG_TUSB_DEBUG
-  #define USBD_STACK_SIZE     (3*configMINIMAL_STACK_SIZE)
-#else
-  #define USBD_STACK_SIZE     (3*configMINIMAL_STACK_SIZE/2)
-#endif
-
-StackType_t  usb_device_stack[USBD_STACK_SIZE];
-StaticTask_t usb_device_taskdef;
-
-// static task for cdc
-#define CDC_STACK_SZIE      configMINIMAL_STACK_SIZE
-StackType_t  cdc_stack[CDC_STACK_SZIE];
-StaticTask_t cdc_taskdef;
-
-
-void led_blinky_cb(TimerHandle_t xTimer);
-void usb_device_task(void* param);
-void cdc_task(void* params);
-
-//--------------------------------------------------------------------+
-// Main
-//--------------------------------------------------------------------+
-
-int main(void)
-{
-  board_init();
-
-  // soft timer for blinky
-  blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef);
-  xTimerStart(blinky_tm, 0);
-
-  // Create a task for tinyusb device stack
-  (void) xTaskCreateStatic( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef);
-
-  // Create CDC task
-  (void) xTaskCreateStatic( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef);
-
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-#if CFG_TUSB_MCU != OPT_MCU_ESP32S2 && CFG_TUSB_MCU != OPT_MCU_ESP32S3
-  vTaskStartScheduler();
-#endif
-
-  return 0;
-}
-
-#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
-void app_main(void)
-{
-  main();
-}
-#endif
-
-// USB Device Driver task
-// This top level thread process all usb events and invoke callbacks
-void usb_device_task(void* param)
-{
-  (void) param;
-
-  // This should be called after scheduler/kernel is started.
-  // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
-  tusb_init();
-
-  // RTOS forever loop
-  while (1)
-  {
-    // tinyusb device task
-    tud_task();
-  }
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), 0);
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_SUSPENDED), 0);
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
-}
-
-//--------------------------------------------------------------------+
-// USB CDC
-//--------------------------------------------------------------------+
-void cdc_task(void* params)
-{
-  (void) params;
-
-  // RTOS forever loop
-  while ( 1 )
-  {
-    // connected() check for DTR bit
-    // Most but not all terminal client set this when making connection
-    // if ( tud_cdc_connected() )
-    {
-      // There are data available
-      if ( tud_cdc_available() )
-      {
-        uint8_t buf[64];
-
-        // read and echo back
-        uint32_t count = tud_cdc_read(buf, sizeof(buf));
-        (void) count;
-
-        // Echo back
-        // Note: Skip echo by commenting out write() and write_flush()
-        // for throughput test e.g
-        //    $ dd if=/dev/zero of=/dev/ttyACM0 count=10000
-        tud_cdc_write(buf, count);
-        tud_cdc_write_flush();
-      }
-    }
-
-    // For ESP32-S2 this delay is essential to allow idle how to run and reset wdt
-    vTaskDelay(pdMS_TO_TICKS(10));
-  }
-}
-
-// Invoked when cdc when line state changed e.g connected/disconnected
-void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
-{
-  (void) itf;
-  (void) rts;
-
-  // TODO set some indicator
-  if ( dtr )
-  {
-    // Terminal connected
-  }else
-  {
-    // Terminal disconnected
-  }
-}
-
-// Invoked when CDC interface received data from host
-void tud_cdc_rx_cb(uint8_t itf)
-{
-  (void) itf;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinky_cb(TimerHandle_t xTimer)
-{
-  (void) xTimer;
-  static bool led_state = false;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c b/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c
deleted file mode 100755
index 5aa7befc..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-#if CFG_TUD_MSC
-
-// Some MCU doesn't have enough 8KB SRAM to store the whole disk
-// We will use Flash as read-only disk with board that has
-// CFG_EXAMPLE_MSC_READONLY defined
-
-#define README_CONTENTS \
-"This is tinyusb's MassStorage Class demo.\r\n\r\n\
-If you find any bugs or get any questions, feel free to file an\r\n\
-issue at github.com/hathach/tinyusb"
-
-enum
-{
-  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
-  DISK_BLOCK_SIZE = 512
-};
-
-#ifdef CFG_EXAMPLE_MSC_READONLY
-const
-#endif
-uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
-{
-  //------------- Block0: Boot Sector -------------//
-  // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
-  // sector_per_cluster = 1; reserved_sectors = 1;
-  // fat_num            = 1; fat12_root_entry_num = 16;
-  // sector_per_fat     = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0;
-  // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
-  // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC";
-  // FAT magic code at offset 510-511
-  {
-      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
-      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
-      'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
-
-      // Zero up to 2 last bytes of FAT magic code
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
-  },
-
-  //------------- Block1: FAT12 Table -------------//
-  {
-      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
-  },
-
-  //------------- Block2: Root Directory -------------//
-  {
-      // first entry is volume label
-      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      // second entry is readme file
-      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
-      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
-      sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
-  },
-
-  //------------- Block3: Readme Content -------------//
-  README_CONTENTS
-};
-
-// Invoked when received SCSI_CMD_INQUIRY
-// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
-void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
-{
-  (void) lun;
-
-  const char vid[] = "TinyUSB";
-  const char pid[] = "Mass Storage";
-  const char rev[] = "1.0";
-
-  memcpy(vendor_id  , vid, strlen(vid));
-  memcpy(product_id , pid, strlen(pid));
-  memcpy(product_rev, rev, strlen(rev));
-}
-
-// Invoked when received Test Unit Ready command.
-// return true allowing host to read/write this LUN e.g SD card inserted
-bool tud_msc_test_unit_ready_cb(uint8_t lun)
-{
-  (void) lun;
-
-  return true; // RAM disk is always ready
-}
-
-// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
-// Application update block count and block size
-void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
-{
-  (void) lun;
-
-  *block_count = DISK_BLOCK_NUM;
-  *block_size  = DISK_BLOCK_SIZE;
-}
-
-// Invoked when received Start Stop Unit command
-// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
-// - Start = 1 : active mode, if load_eject = 1 : load disk storage
-bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
-{
-  (void) lun;
-  (void) power_condition;
-
-  if ( load_eject )
-  {
-    if (start)
-    {
-      // load disk storage
-    }else
-    {
-      // unload disk storage
-    }
-  }
-
-  return true;
-}
-
-// Callback invoked when received READ10 command.
-// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
-int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
-{
-  (void) lun;
-
-  uint8_t const* addr = msc_disk[lba] + offset;
-  memcpy(buffer, addr, bufsize);
-
-  return bufsize;
-}
-
-// Callback invoked when received WRITE10 command.
-// Process data in buffer to disk's storage and return number of written bytes
-int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
-{
-  (void) lun;
-
-#ifndef CFG_EXAMPLE_MSC_READONLY
-  uint8_t* addr = msc_disk[lba] + offset;
-  memcpy(addr, buffer, bufsize);
-#else
-  (void) lba; (void) offset; (void) buffer;
-#endif
-
-  return bufsize;
-}
-
-// Callback invoked when received an SCSI command not in built-in list below
-// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
-// - READ10 and WRITE10 has their own callbacks
-int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
-{
-  // read10 & write10 has their own callback and MUST not be handled here
-
-  void const* response = NULL;
-  uint16_t resplen = 0;
-
-  // most scsi handled is input
-  bool in_xfer = true;
-
-  switch (scsi_cmd[0])
-  {
-    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-      // Host is about to read/write etc ... better not to disconnect disk
-      resplen = 0;
-    break;
-
-    default:
-      // Set Sense = Invalid Command Operation
-      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
-
-      // negative means error -> tinyusb could stall and/or response with failed status
-      resplen = -1;
-    break;
-  }
-
-  // return resplen must not larger than bufsize
-  if ( resplen > bufsize ) resplen = bufsize;
-
-  if ( response && (resplen > 0) )
-  {
-    if(in_xfer)
-    {
-      memcpy(buffer, response, resplen);
-    }else
-    {
-      // SCSI output
-    }
-  }
-
-  return resplen;
-}
-
-#endif
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h b/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h
deleted file mode 100755
index ff543834..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-// This examples use FreeRTOS
-#define CFG_TUSB_OS               OPT_OS_FREERTOS
-
-// can be defined by compiler in DEBUG build
-#ifndef CFG_TUSB_DEBUG
-  #define CFG_TUSB_DEBUG           0
-#endif
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC              1
-#define CFG_TUD_MSC              1
-#define CFG_TUD_HID              0
-#define CFG_TUD_MIDI             0
-#define CFG_TUD_VENDOR           0
-
-// CDC FIFO size of TX and RX
-#define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-#define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-// CDC Endpoint transfer buffer size, more is faster
-#define CFG_TUD_CDC_EP_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-// MSC Buffer size of Device Mass storage
-#define CFG_TUD_MSC_EP_BUFSIZE   512
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c
deleted file mode 100755
index 75b5ce7b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_NUM_CDC = 0,
-  ITF_NUM_CDC_DATA,
-  ITF_NUM_MSC,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
-  #define EPNUM_CDC_NOTIF   0x81
-  #define EPNUM_CDC_OUT     0x02
-  #define EPNUM_CDC_IN      0x82
-
-  #define EPNUM_MSC_OUT     0x05
-  #define EPNUM_MSC_IN      0x85
-
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG
-  // SAMG doesn't support a same endpoint number with different direction IN and OUT
-  //    e.g EP1 OUT & EP1 IN cannot exist together
-  #define EPNUM_CDC_NOTIF   0x81
-  #define EPNUM_CDC_OUT     0x02
-  #define EPNUM_CDC_IN      0x83
-
-  #define EPNUM_MSC_OUT     0x04
-  #define EPNUM_MSC_IN      0x85
-
-#else
-  #define EPNUM_CDC_NOTIF   0x81
-  #define EPNUM_CDC_OUT     0x02
-  #define EPNUM_CDC_IN      0x82
-
-  #define EPNUM_MSC_OUT     0x03
-  #define EPNUM_MSC_IN      0x83
-
-#endif
-
-uint8_t const desc_fs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
-};
-
-#if TUD_OPT_HIGH_SPEED
-uint8_t const desc_hs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
-};
-#endif
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-
-#if TUD_OPT_HIGH_SPEED
-  // Although we are highspeed, host may be fullspeed.
-  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
-#else
-  return desc_fs_configuration;
-#endif
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-  "TinyUSB CDC",                 // 4: CDC Interface
-  "TinyUSB MSC",                 // 5: MSC Interface
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}