diff options
author | joeycastillo <joeycastillo@utexas.edu> | 2021-08-30 14:42:11 -0400 |
---|---|---|
committer | GitHub <noreply@github.com> | 2021-08-30 14:42:11 -0400 |
commit | eb3d9b26cbda2d2612f11eb39843b221224f1fa7 (patch) | |
tree | 7a514b4d21dd0d2a324a5e1313a144f26bf20799 /tinyusb/examples/device/cdc_msc_freertos | |
parent | ee9cc322d301631c9ff0751d9bed717c6492b6a5 (diff) | |
parent | b0845cc3f1a8234a30c980eccf10e44765e4e105 (diff) | |
download | Sensor-Watch-eb3d9b26cbda2d2612f11eb39843b221224f1fa7.tar.gz Sensor-Watch-eb3d9b26cbda2d2612f11eb39843b221224f1fa7.tar.bz2 Sensor-Watch-eb3d9b26cbda2d2612f11eb39843b221224f1fa7.zip |
Merge pull request #9 from joeycastillo/usb-refactor
USB refactor / Makefile simplification
Diffstat (limited to 'tinyusb/examples/device/cdc_msc_freertos')
19 files changed, 1191 insertions, 0 deletions
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12 diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI diff --git a/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt b/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt new file mode 100755 index 00000000..639dde99 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt @@ -0,0 +1,22 @@ +cmake_minimum_required(VERSION 3.5) + +# TOP is absolute path to root directory of TinyUSB git repo +# needed for esp32sx build. TOOD could be removed later on +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +# Check for -DFAMILY= +if(FAMILY MATCHES "^esp32s[2-3]") +else() + message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") +endif() diff --git a/tinyusb/examples/device/cdc_msc_freertos/Makefile b/tinyusb/examples/device/cdc_msc_freertos/Makefile new file mode 100755 index 00000000..86bacd2d --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/Makefile @@ -0,0 +1,29 @@ +DEPS_SUBMODULES += lib/FreeRTOS-Kernel + +include ../../../tools/top.mk +include ../../make.mk + +FREERTOS_SRC = lib/FreeRTOS-Kernel + +INC += \ + src \ + $(TOP)/hw \ + $(TOP)/$(FREERTOS_SRC)/include \ + $(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT) + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +# FreeRTOS source, all files in port folder +SRC_C += \ + $(FREERTOS_SRC)/list.c \ + $(FREERTOS_SRC)/queue.c \ + $(FREERTOS_SRC)/tasks.c \ + $(FREERTOS_SRC)/timers.c \ + $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) + +# FreeRTOS (lto + Os) linker issue +LDFLAGS += -Wl,--undefined=vTaskSwitchContext + +include ../../rules.mk diff --git a/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults b/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults new file mode 100755 index 00000000..83871619 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults @@ -0,0 +1,3 @@ +CONFIG_IDF_CMAKE=y +CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt b/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt new file mode 100755 index 00000000..6b188fd3 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt @@ -0,0 +1,32 @@ +idf_component_register(SRCS "main.c" "usb_descriptors.c" "msc_disk.c" + INCLUDE_DIRS "." + REQUIRES freertos soc) + +file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake) + +if(EXISTS ${board_cmake}) + include(${board_cmake}) +endif() + +idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH) +target_include_directories(${COMPONENT_TARGET} PUBLIC + "${FREERTOS_ORIG_INCLUDE_PATH}" + "${TOP}/hw" + "${TOP}/src" +) + +target_sources(${COMPONENT_TARGET} PUBLIC + "${TOP}/src/tusb.c" + "${TOP}/src/common/tusb_fifo.c" + "${TOP}/src/device/usbd.c" + "${TOP}/src/device/usbd_control.c" + "${TOP}/src/class/cdc/cdc_device.c" + "${TOP}/src/class/dfu/dfu_rt_device.c" + "${TOP}/src/class/hid/hid_device.c" + "${TOP}/src/class/midi/midi_device.c" + "${TOP}/src/class/msc/msc_device.c" + "${TOP}/src/class/net/net_device.c" + "${TOP}/src/class/usbtmc/usbtmc_device.c" + "${TOP}/src/class/vendor/vendor_device.c" + "${TOP}/src/portable/espressif/esp32sx/dcd_esp32sx.c" +) diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h b/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h new file mode 100755 index 00000000..568b27a1 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h @@ -0,0 +1,182 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// Include MCU header +#include "bsp/board_mcu.h" + +extern uint32_t SystemCoreClock; + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( 0*1024 ) // dynamic is not used +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 0 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +#ifdef __RX__ +/* Renesas RX series */ +#define vSoftwareInterruptISR INT_Excep_ICU_SWINT +#define vTickISR INT_Excep_CMT0_CMI0 +#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) +#define configKERNEL_INTERRUPT_PRIORITY 1 +#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 + +#else + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ +#if defined(__NVIC_PRIO_BITS) + // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h + #define configPRIO_BITS __NVIC_PRIO_BITS +#elif defined(__ECLIC_INTCTLBITS) + // RISC-V Bumblebee core from nuclei + #define configPRIO_BITS __ECLIC_INTCTLBITS +#else + #error "FreeRTOS configPRIO_BITS to be defined" +#endif + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) + +/* The highest interrupt priority that can be used by any interrupt service +routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL +INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER +PRIORITY THAN THIS! (higher priorities are lower numeric values. */ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 + +/* Interrupt priorities used by the kernel port layer itself. These are generic +to all Cortex-M ports, and do not rely on any particular library functions. */ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! +See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +#endif + +#endif /* __FREERTOS_CONFIG__H */ diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c b/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c new file mode 100755 index 00000000..ab885947 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c @@ -0,0 +1,114 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +//--------------------------------------------------------------------+ +// INCLUDE +//--------------------------------------------------------------------+ +#include "FreeRTOS.h" +#include "task.h" +#include "common/tusb_common.h" + + +void vApplicationMallocFailedHook(void) +{ + taskDISABLE_INTERRUPTS(); + TU_ASSERT(false, ); +} + +void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) +{ + (void) pxTask; + (void) pcTaskName; + + taskDISABLE_INTERRUPTS(); + TU_ASSERT(false, ); +} + +/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an + * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is + * used by the Idle task. */ +void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) +{ + /* If the buffers to be provided to the Idle task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xIdleTaskTCB; + static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Idle task's + state will be stored. */ + *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; + + /* Pass out the array that will be used as the Idle task's stack. */ + *ppxIdleTaskStackBuffer = uxIdleTaskStack; + + /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; +} + +/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the + * application must provide an implementation of vApplicationGetTimerTaskMemory() + * to provide the memory that is used by the Timer service task. */ +void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize ) +{ + /* If the buffers to be provided to the Timer task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xTimerTaskTCB; + static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Timer + task's state will be stored. */ + *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; + + /* Pass out the array that will be used as the Timer task's stack. */ + *ppxTimerTaskStackBuffer = uxTimerTaskStack; + + /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */ + *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; +} + +#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X +#include "iodefine.h" +void vApplicationSetupTimerInterrupt(void) +{ + /* Enable CMT0 */ + SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); + MSTP(CMT0) = 0; + SYSTEM.PRCR.WORD = (0xA5u<<8); + + CMT0.CMCNT = 0; + CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); + CMT0.CMCR.WORD = TU_BIT(6) | 2; + IR(CMT0, CMI0) = 0; + IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY; + IEN(CMT0, CMI0) = 1; + CMT.CMSTR0.BIT.STR0 = 1; +} +#endif diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/main.c b/tinyusb/examples/device/cdc_msc_freertos/src/main.c new file mode 100755 index 00000000..c27b7fed --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/main.c @@ -0,0 +1,230 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "FreeRTOS.h" +#include "task.h" +#include "timers.h" +#include "queue.h" +#include "semphr.h" + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +// static timer +StaticTimer_t blinky_tmdef; +TimerHandle_t blinky_tm; + +// static task for usbd +// Increase stack size when debug log is enabled +#if CFG_TUSB_DEBUG + #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE) +#else + #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) +#endif + +StackType_t usb_device_stack[USBD_STACK_SIZE]; +StaticTask_t usb_device_taskdef; + +// static task for cdc +#define CDC_STACK_SZIE configMINIMAL_STACK_SIZE +StackType_t cdc_stack[CDC_STACK_SZIE]; +StaticTask_t cdc_taskdef; + + +void led_blinky_cb(TimerHandle_t xTimer); +void usb_device_task(void* param); +void cdc_task(void* params); + +//--------------------------------------------------------------------+ +// Main +//--------------------------------------------------------------------+ + +int main(void) +{ + board_init(); + + // soft timer for blinky + blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); + xTimerStart(blinky_tm, 0); + + // Create a task for tinyusb device stack + (void) xTaskCreateStatic( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); + + // Create CDC task + (void) xTaskCreateStatic( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); + + // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#if CFG_TUSB_MCU != OPT_MCU_ESP32S2 && CFG_TUSB_MCU != OPT_MCU_ESP32S3 + vTaskStartScheduler(); +#endif + + return 0; +} + +#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +void app_main(void) +{ + main(); +} +#endif + +// USB Device Driver task +// This top level thread process all usb events and invoke callbacks +void usb_device_task(void* param) +{ + (void) param; + + // This should be called after scheduler/kernel is started. + // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. + tusb_init(); + + // RTOS forever loop + while (1) + { + // tinyusb device task + tud_task(); + } +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0); +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), 0); +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_SUSPENDED), 0); +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0); +} + +//--------------------------------------------------------------------+ +// USB CDC +//--------------------------------------------------------------------+ +void cdc_task(void* params) +{ + (void) params; + + // RTOS forever loop + while ( 1 ) + { + // connected() check for DTR bit + // Most but not all terminal client set this when making connection + // if ( tud_cdc_connected() ) + { + // There are data available + if ( tud_cdc_available() ) + { + uint8_t buf[64]; + + // read and echo back + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + (void) count; + + // Echo back + // Note: Skip echo by commenting out write() and write_flush() + // for throughput test e.g + // $ dd if=/dev/zero of=/dev/ttyACM0 count=10000 + tud_cdc_write(buf, count); + tud_cdc_write_flush(); + } + } + + // For ESP32-S2 this delay is essential to allow idle how to run and reset wdt + vTaskDelay(pdMS_TO_TICKS(10)); + } +} + +// Invoked when cdc when line state changed e.g connected/disconnected +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) +{ + (void) itf; + (void) rts; + + // TODO set some indicator + if ( dtr ) + { + // Terminal connected + }else + { + // Terminal disconnected + } +} + +// Invoked when CDC interface received data from host +void tud_cdc_rx_cb(uint8_t itf) +{ + (void) itf; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinky_cb(TimerHandle_t xTimer) +{ + (void) xTimer; + static bool led_state = false; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c b/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c new file mode 100755 index 00000000..5aa7befc --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -0,0 +1,249 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board.h" +#include "tusb.h" + +#if CFG_TUD_MSC + +// Some MCU doesn't have enough 8KB SRAM to store the whole disk +// We will use Flash as read-only disk with board that has +// CFG_EXAMPLE_MSC_READONLY defined + +#define README_CONTENTS \ +"This is tinyusb's MassStorage Class demo.\r\n\r\n\ +If you find any bugs or get any questions, feel free to file an\r\n\ +issue at github.com/hathach/tinyusb" + +enum +{ + DISK_BLOCK_NUM = 16, // 8KB is the smallest size that windows allow to mount + DISK_BLOCK_SIZE = 512 +}; + +#ifdef CFG_EXAMPLE_MSC_READONLY +const +#endif +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +{ + //------------- Block0: Boot Sector -------------// + // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; + // sector_per_cluster = 1; reserved_sectors = 1; + // fat_num = 1; fat12_root_entry_num = 16; + // sector_per_fat = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0; + // drive_number = 0x80; media_type = 0xf8; extended_boot_signature = 0x29; + // filesystem_type = "FAT12 "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC"; + // FAT magic code at offset 510-511 + { + 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00, + 0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' , + 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00, + + // Zero up to 2 last bytes of FAT magic code + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA + }, + + //------------- Block1: FAT12 Table -------------// + { + 0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file + }, + + //------------- Block2: Root Directory -------------// + { + // first entry is volume label + 'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + // second entry is readme file + 'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D, + 0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00, + sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes) + }, + + //------------- Block3: Readme Content -------------// + README_CONTENTS +}; + +// Invoked when received SCSI_CMD_INQUIRY +// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively +void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) +{ + (void) lun; + + const char vid[] = "TinyUSB"; + const char pid[] = "Mass Storage"; + const char rev[] = "1.0"; + + memcpy(vendor_id , vid, strlen(vid)); + memcpy(product_id , pid, strlen(pid)); + memcpy(product_rev, rev, strlen(rev)); +} + +// Invoked when received Test Unit Ready command. +// return true allowing host to read/write this LUN e.g SD card inserted +bool tud_msc_test_unit_ready_cb(uint8_t lun) +{ + (void) lun; + + return true; // RAM disk is always ready +} + +// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size +// Application update block count and block size +void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) +{ + (void) lun; + + *block_count = DISK_BLOCK_NUM; + *block_size = DISK_BLOCK_SIZE; +} + +// Invoked when received Start Stop Unit command +// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage +// - Start = 1 : active mode, if load_eject = 1 : load disk storage +bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) +{ + (void) lun; + (void) power_condition; + + if ( load_eject ) + { + if (start) + { + // load disk storage + }else + { + // unload disk storage + } + } + + return true; +} + +// Callback invoked when received READ10 command. +// Copy disk's data to buffer (up to bufsize) and return number of copied bytes. +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) +{ + (void) lun; + + uint8_t const* addr = msc_disk[lba] + offset; + memcpy(buffer, addr, bufsize); + + return bufsize; +} + +// Callback invoked when received WRITE10 command. +// Process data in buffer to disk's storage and return number of written bytes +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) +{ + (void) lun; + +#ifndef CFG_EXAMPLE_MSC_READONLY + uint8_t* addr = msc_disk[lba] + offset; + memcpy(addr, buffer, bufsize); +#else + (void) lba; (void) offset; (void) buffer; +#endif + + return bufsize; +} + +// Callback invoked when received an SCSI command not in built-in list below +// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE +// - READ10 and WRITE10 has their own callbacks +int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) +{ + // read10 & write10 has their own callback and MUST not be handled here + + void const* response = NULL; + uint16_t resplen = 0; + + // most scsi handled is input + bool in_xfer = true; + + switch (scsi_cmd[0]) + { + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + // Host is about to read/write etc ... better not to disconnect disk + resplen = 0; + break; + + default: + // Set Sense = Invalid Command Operation + tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + + // negative means error -> tinyusb could stall and/or response with failed status + resplen = -1; + break; + } + + // return resplen must not larger than bufsize + if ( resplen > bufsize ) resplen = bufsize; + + if ( response && (resplen > 0) ) + { + if(in_xfer) + { + memcpy(buffer, response, resplen); + }else + { + // SCSI output + } + } + + return resplen; +} + +#endif diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h b/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h new file mode 100755 index 00000000..ff543834 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -0,0 +1,119 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +// This examples use FreeRTOS +#define CFG_TUSB_OS OPT_OS_FREERTOS + +// can be defined by compiler in DEBUG build +#ifndef CFG_TUSB_DEBUG + #define CFG_TUSB_DEBUG 0 +#endif + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 1 +#define CFG_TUD_MSC 1 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// CDC Endpoint transfer buffer size, more is faster +#define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// MSC Buffer size of Device Mass storage +#define CFG_TUD_MSC_EP_BUFSIZE 512 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c new file mode 100755 index 00000000..75b5ce7b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -0,0 +1,211 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_CDC = 0, + ITF_NUM_CDC_DATA, + ITF_NUM_MSC, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + + #define EPNUM_MSC_OUT 0x05 + #define EPNUM_MSC_IN 0x85 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG + // SAMG doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + + #define EPNUM_MSC_OUT 0x04 + #define EPNUM_MSC_IN 0x85 + +#else + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + + #define EPNUM_MSC_OUT 0x03 + #define EPNUM_MSC_IN 0x83 + +#endif + +uint8_t const desc_fs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64), +}; + +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), +}; +#endif + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID + "TinyUSB CDC", // 4: CDC Interface + "TinyUSB MSC", // 5: MSC Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} |