remove tinyusb directory

5 files changed, 0 insertions, 519 deletions

diff --git a/tinyusb/examples/device/dfu/CMakeLists.txt b/tinyusb/examples/device/dfu/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/dfu/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/dfu/Makefile b/tinyusb/examples/device/dfu/Makefile
deleted file mode 100755
index 69b633fe..00000000
--- a/tinyusb/examples/device/dfu/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/dfu/src/main.c b/tinyusb/examples/device/dfu/src/main.c
deleted file mode 100755
index 5c846452..00000000
--- a/tinyusb/examples/device/dfu/src/main.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
- /*
-  * After device is enumerated in dfu mode run the following commands
-  *
-  * To transfer firmware from host to device (best to test with text file)
-  *
-  * $ dfu-util -d cafe -a 0 -D [filename]
-  * $ dfu-util -d cafe -a 1 -D [filename]
-  *
-  * To transfer firmware from device to host:
-  *
-  * $ dfu-util -d cafe -a 0 -U [filename]
-  * $ dfu-util -d cafe -a 1 -U [filename]
-  *
-  */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-const char* upload_image[2]=
-{
-  "Hello world from TinyUSB DFU! - Partition 0",
-  "Hello world from TinyUSB DFU! - Partition 1"
-};
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// DFU callbacks
-// Note: alt is used as the partition number, in order to support multiple partitions like FLASH, EEPROM, etc.
-//--------------------------------------------------------------------+
-
-// Invoked right before tud_dfu_download_cb() (state=DFU_DNBUSY) or tud_dfu_manifest_cb() (state=DFU_MANIFEST)
-// Application return timeout in milliseconds (bwPollTimeout) for the next download/manifest operation.
-// During this period, USB host won't try to communicate with us.
-uint32_t tud_dfu_get_timeout_cb(uint8_t alt, uint8_t state)
-{
-  if ( state == DFU_DNBUSY )
-  {
-    // For this example
-    // - Atl0 Flash is fast : 1   ms
-    // - Alt1 EEPROM is slow: 100 ms
-    return (alt == 0) ? 1 : 100;
-  }
-  else if (state == DFU_MANIFEST)
-  {
-    // since we don't buffer entire image and do any flashing in manifest stage
-    return 0;
-  }
-
-  return 0;
-}
-
-// Invoked when received DFU_DNLOAD (wLength>0) following by DFU_GETSTATUS (state=DFU_DNBUSY) requests
-// This callback could be returned before flashing op is complete (async).
-// Once finished flashing, application must call tud_dfu_finish_flashing()
-void tud_dfu_download_cb(uint8_t alt, uint16_t block_num, uint8_t const* data, uint16_t length)
-{
-  (void) alt;
-  (void) block_num;
-
-  //printf("\r\nReceived Alt %u BlockNum %u of length %u\r\n", alt, wBlockNum, length);
-
-  for(uint16_t i=0; i<length; i++)
-  {
-    printf("%c", data[i]);
-  }
-
-  // flashing op for download complete without error
-  tud_dfu_finish_flashing(DFU_STATUS_OK);
-}
-
-// Invoked when download process is complete, received DFU_DNLOAD (wLength=0) following by DFU_GETSTATUS (state=Manifest)
-// Application can do checksum, or actual flashing if buffered entire image previously.
-// Once finished flashing, application must call tud_dfu_finish_flashing()
-void tud_dfu_manifest_cb(uint8_t alt)
-{
-  (void) alt;
-  printf("Download completed, enter manifestation\r\n");
-
-  // flashing op for manifest is complete without error
-  // Application can perform checksum, should it fail, use appropriate status such as errVERIFY.
-  tud_dfu_finish_flashing(DFU_STATUS_OK);
-}
-
-// Invoked when received DFU_UPLOAD request
-// Application must populate data with up to length bytes and
-// Return the number of written bytes
-uint16_t tud_dfu_upload_cb(uint8_t alt, uint16_t block_num, uint8_t* data, uint16_t length)
-{
-  (void) block_num;
-  (void) length;
-
-  uint16_t const xfer_len = (uint16_t) strlen(upload_image[alt]);
-  memcpy(data, upload_image[alt], xfer_len);
-
-  return xfer_len;
-}
-
-// Invoked when the Host has terminated a download or upload transfer
-void tud_dfu_abort_cb(uint8_t alt)
-{
-  (void) alt;
-  printf("Host aborted transfer\r\n");
-}
-
-// Invoked when a DFU_DETACH request is received
-void tud_dfu_detach_cb(void)
-{
-  printf("Host detach, we should probably reboot\r\n");
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK + Indicator pulse
-//--------------------------------------------------------------------+
-
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/dfu/src/tusb_config.h b/tinyusb/examples/device/dfu/src/tusb_config.h
deleted file mode 100755
index 66e35702..00000000
--- a/tinyusb/examples/device/dfu/src/tusb_config.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * tusb_config.h
- *
- *  Created on: May 5, 2021
- *      Author: Jeremiah McCarthy
- */
-
-#ifndef TUSB_CONFIG_H_
-#define TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_DFU    1
-
-// DFU buffer size, it has to be set to the buffer size used in TUD_DFU_DESCRIPTOR
-#define CFG_TUD_DFU_XFER_BUFSIZE    512
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/dfu/src/usb_descriptors.c b/tinyusb/examples/device/dfu/src/usb_descriptors.c
deleted file mode 100755
index 1cfe29c5..00000000
--- a/tinyusb/examples/device/dfu/src/usb_descriptors.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-#include "class/dfu/dfu_device.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-  #if CFG_TUD_CDC
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-  #else
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-  #endif
-
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-// Number of Alternate Interface (each for 1 flash partition)
-#define ALT_COUNT   2
-
-enum
-{
-  ITF_NUM_DFU_MODE,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_DFU_DESC_LEN(ALT_COUNT))
-
-#define FUNC_ATTRS (DFU_ATTR_CAN_UPLOAD | DFU_ATTR_CAN_DOWNLOAD | DFU_ATTR_MANIFESTATION_TOLERANT)
-
-uint8_t const desc_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, Alternate count, starting string index, attributes, detach timeout, transfer size
-  TUD_DFU_DESCRIPTOR(ITF_NUM_DFU_MODE, ALT_COUNT, 4, FUNC_ATTRS, 1000, CFG_TUD_DFU_XFER_BUFSIZE),
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-  "FLASH",                       // 4: DFU Partition 1
-  "EEPROM",                      // 5: DFU Partition 2
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  size_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }
-  else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) {
-      chr_count = 31;
-    }
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u));
-
-  return _desc_str;
-}