diff options
author | Willian Paixao <willian@ufpa.br> | 2021-12-05 19:16:34 +0100 |
---|---|---|
committer | Willian Paixao <willian@ufpa.br> | 2021-12-05 19:16:34 +0100 |
commit | ac2e205ae9f465c27297ea542c72e8cfe4966f8c (patch) | |
tree | 16e4d1268b2631ba7e17dcda8f366f070fbd7475 /tinyusb/hw/bsp/msp430/family.c | |
parent | bbd394a19aaa334a179c36cf2ed2a066f1bb312c (diff) | |
download | Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.tar.gz Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.tar.bz2 Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.zip |
remove tinyusb directory
Diffstat (limited to 'tinyusb/hw/bsp/msp430/family.c')
-rwxr-xr-x | tinyusb/hw/bsp/msp430/family.c | 218 |
1 files changed, 0 insertions, 218 deletions
diff --git a/tinyusb/hw/bsp/msp430/family.c b/tinyusb/hw/bsp/msp430/family.c deleted file mode 100755 index 4b8ae393..00000000 --- a/tinyusb/hw/bsp/msp430/family.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "board.h" -#include "msp430.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void __attribute__ ((interrupt(USB_UBM_VECTOR))) USB_UBM_ISR(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -uint32_t cnt = 0; - -static void SystemClock_Config(void) -{ - WDTCTL = WDTPW + WDTHOLD; // Disable watchdog. - - // Increase VCore to level 2- required for 16 MHz operation on this MCU. - PMMCTL0 = PMMPW + PMMCOREV_2; - - UCSCTL3 = SELREF__XT2CLK; // FLL is fed by XT2. - - // XT1 used for ACLK (default- not used in this demo) - P5SEL |= BIT4; // Required to enable XT1 - // Loop until XT1 fault flag is cleared. - do - { - UCSCTL7 &= ~XT1LFOFFG; - }while(UCSCTL7 & XT1LFOFFG); - - // XT2 is 4 MHz an external oscillator, use PLL to boost to 16 MHz. - P5SEL |= BIT2; // Required to enable XT2. - // Loop until XT2 fault flag is cleared - do - { - UCSCTL7 &= ~XT2OFFG; - }while(UCSCTL7 & XT2OFFG); - - // Kickstart the DCO into the correct frequency range, otherwise a - // fault will occur. - // FIXME: DCORSEL_6 should work according to datasheet params, but generates - // a fault. I am not sure why it faults. - UCSCTL1 = DCORSEL_7; - UCSCTL2 = FLLD_2 + 3; // DCO freq = D * (N + 1) * (FLLREFCLK / n) - // DCOCLKDIV freq = (N + 1) * (FLLREFCLK / n) - // N = 3, D = 2, thus DCO freq = 32 MHz. - - // MCLK configured for 16 MHz using XT2. - // SMCLK configured for 8 MHz using XT2. - UCSCTL4 |= SELM__DCOCLKDIV + SELS__DCOCLKDIV; - UCSCTL5 |= DIVM__16 + DIVS__2; - - // Now wait till everything's stabilized. - do - { - UCSCTL7 &= ~(XT2OFFG + XT1LFOFFG + DCOFFG); - SFRIFG1 &= ~OFIFG; - }while(SFRIFG1 & OFIFG); - - // Configure Timer A to use SMCLK as a source. Count 1000 ticks at 1 MHz. - TA0CCTL0 |= CCIE; - TA0CCR0 = 999; // 1000 ticks. - TA0CTL |= TASSEL_2 + ID_3 + MC__UP; // Use SMCLK, divide by 8, start timer. - - // Initialize USB power and PLL. - USBKEYPID = USBKEY; - - // VUSB enabled automatically. - // Wait two milliseconds to stabilize, per manual recommendation. - uint32_t ms_elapsed = board_millis(); - do - { - while((board_millis() - ms_elapsed) < 2); - }while(!(USBPWRCTL & USBBGVBV)); - - // USB uses XT2 (4 MHz) directly. Enable the PLL. - USBPLLDIVB |= USBPLL_SETCLK_4_0; - USBPLLCTL |= (UPFDEN | UPLLEN); - - // Wait until PLL locks. Check every 2ms, per manual. - ms_elapsed = board_millis(); - do - { - USBPLLIR &= ~USBOOLIFG; - while((board_millis() - ms_elapsed) < 2); - }while(USBPLLIR & USBOOLIFG); - - USBKEYPID = 0; -} - -uint32_t wait = 0; - -void board_init(void) -{ - __bis_SR_register(GIE); // Enable interrupts. - SystemClock_Config(); - - // Enable basic I/O. - P1DIR |= LED_PIN; // LED output. - P1REN |= BUTTON_PIN; // Internal resistor enable. - P1OUT |= BUTTON_PIN; // Pullup. - - // Enable the backchannel UART (115200) - P4DIR |= BIT5; - P4SEL |= (BIT5 | BIT4); - - UCA1CTL1 |= (UCSSEL__SMCLK | UCSWRST); // Hold in reset, use SMCLK. - UCA1BRW = 4; - UCA1MCTL |= (UCBRF_3 | UCBRS_5 | UCOS16); // Overampling mode, 115200 baud. - // Copied from manual. - UCA1CTL1 &= ~UCSWRST; - - // Set up USB pins. - USBKEYPID = USBKEY; - USBPHYCTL |= PUSEL; // Convert USB D+/D- pins to USB functionality. - USBKEYPID = 0; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - if(state) - { - LED_PORT |= LED_PIN; - } - else - { - LED_PORT &= ~LED_PIN; - } -} - -uint32_t board_button_read(void) -{ - return ((P1IN & BIT1) >> 1) == BUTTON_STATE_ACTIVE; -} - -int board_uart_read(uint8_t * buf, int len) -{ - for(int i = 0; i < len; i++) - { - // Wait until something to receive (cleared by reading buffer). - while(!(UCA1IFG & UCRXIFG)); - buf[i] = UCA1RXBUF; - } - - return len; -} - -int board_uart_write(void const * buf, int len) -{ - const char * char_buf = (const char *) buf; - - for(int i = 0; i < len; i++) - { - // Wait until TX buffer is empty (cleared by writing buffer). - while(!(UCA1IFG & UCTXIFG)); - UCA1TXBUF = char_buf[i]; - } - - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void __attribute__ ((interrupt(TIMER0_A0_VECTOR))) TIMER0_A0_ISR (void) -{ - system_ticks++; - // TAxCCR0 CCIFG resets itself as soon as interrupt is invoked. -} - -uint32_t board_millis(void) -{ - uint32_t systick_mirror; - - // 32-bit update is not atomic on MSP430. We can read the bottom 16-bits, - // an interrupt occurs, updates _all_ 32 bits, and then we return a - // garbage value. And I've seen it happen! - TA0CCTL0 &= ~CCIE; - systick_mirror = system_ticks; - TA0CCTL0 |= CCIE; - - return systick_mirror; -} -#endif |