remove tinyusb directory

32 files changed, 0 insertions, 1216 deletions

diff --git a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.h b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.h
deleted file mode 100755
index 2c58e8fe..00000000
--- a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define _PINNUM(port, pin)    ((port)*32 + (pin))
-
-// LED
-#define LED_PIN               _PINNUM(1, 1)
-#define LED_STATE_ON          1
-
-// Button
-#define BUTTON_PIN            _PINNUM(1, 02)
-#define BUTTON_STATE_ACTIVE   0
-
-// UART
-#define UART_RX_PIN           4
-#define UART_TX_PIN           5
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.mk b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.mk
deleted file mode 100755
index f31899eb..00000000
--- a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-MCU_VARIANT = nrf52840
-CFLAGS += -DNRF52840_XXAA
-
-$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
-	adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
-
-# flash using adafruit-nrfutil dfu
-flash: $(BUILD)/$(PROJECT).zip
-	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
-	adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200
diff --git a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld
deleted file mode 100755
index 5314a4e9..00000000
--- a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Linker script to configure memory regions. */
-
-SEARCH_DIR(.)
-GROUP(-lgcc -lc -lnosys)
-
-MEMORY
-{
-  FLASH (rx)     : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000
-
-  /* SRAM required by S132 depend on
-   * - Attribute Table Size
-   * - Vendor UUID count
-   * - Max ATT MTU
-   * - Concurrent connection peripheral + central + secure links
-   * - Event Len, HVN queue, Write CMD queue
-   */ 
-  RAM (rwx) :  ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400
-}
-
-SECTIONS
-{
-  . = ALIGN(4);
-  .svc_data :
-  {
-    PROVIDE(__start_svc_data = .);
-    KEEP(*(.svc_data))
-    PROVIDE(__stop_svc_data = .);
-  } > RAM
-  
-  .fs_data :
-  {
-    PROVIDE(__start_fs_data = .);
-    KEEP(*(.fs_data))
-    PROVIDE(__stop_fs_data = .);
-  } > RAM
-} INSERT AFTER .data;
-
-INCLUDE "nrf52_common.ld"
diff --git a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld
deleted file mode 100755
index f570740b..00000000
--- a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Linker script to configure memory regions. */
-
-SEARCH_DIR(.)
-GROUP(-lgcc -lc -lnosys)
-
-MEMORY
-{
-  FLASH (rx) : ORIGIN = 0x10000, LENGTH = 0xf0000
-  RAM_NVIC (rwx) : ORIGIN = 0x20000000, LENGTH = 0x100
-  RAM_CRASH_DATA (rwx) : ORIGIN = (0x20000000 + 0x100), LENGTH = 0x100
-  RAM (rwx) : ORIGIN = ((0x20000000 + 0x100) + 0x100), LENGTH = (0x40000 - (0x100 + 0x100))
-}
-
-SECTIONS
-{
-  . = ALIGN(4);
-  .svc_data :
-  {
-    PROVIDE(__start_svc_data = .);
-    KEEP(*(.svc_data))
-    PROVIDE(__stop_svc_data = .);
-  } > RAM
-  
-  .fs_data :
-  {
-    PROVIDE(__start_fs_data = .);
-    KEEP(*(.fs_data))
-    PROVIDE(__stop_fs_data = .);
-  } > RAM
-} INSERT AFTER .data;
-
-INCLUDE "nrf52_common.ld"
diff --git a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.h b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.h
deleted file mode 100755
index d548e01c..00000000
--- a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define _PINNUM(port, pin)    ((port)*32 + (pin))
-
-// LED
-#define LED_PIN               _PINNUM(0, 24)
-#define LED_STATE_ON          0
-
-// Button
-#define BUTTON_PIN            _PINNUM(1, 11) // D2
-#define BUTTON_STATE_ACTIVE   0
-
-// UART
-#define UART_RX_PIN           _PINNUM(1, 10)
-#define UART_TX_PIN           _PINNUM(1, 3)
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.mk b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.mk
deleted file mode 100755
index 94babd82..00000000
--- a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-MCU_VARIANT = nrf52840
-CFLAGS += -DNRF52840_XXAA
-
-LD_FILE = $(BOARD_PATH)/$(BOARD).ld
-
-# flash using bossac (as part of Nano33 BSP tools)
-# can be found in arduino15/packages/arduino/tools/bossac/
-# Add it to your PATH or change BOSSAC variable to match your installation
-BOSSAC = bossac
-
-flash: $(BUILD)/$(PROJECT).bin
-	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
-	$(BOSSAC) --port=$(SERIAL) -U -i -e -w $^ -R
diff --git a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h
deleted file mode 100755
index a86c9dc7..00000000
--- a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define _PINNUM(port, pin)    ((port)*32 + (pin))
-
-// LED
-#define LED_PIN         _PINNUM(1, 14)
-#define LED_STATE_ON    1
-
-// Button
-#define BUTTON_PIN      _PINNUM(1, 15)
-#define BUTTON_STATE_ACTIVE   1
-
-// UART
-#define UART_RX_PIN     30
-#define UART_TX_PIN     14
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk
deleted file mode 100755
index f31899eb..00000000
--- a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-MCU_VARIANT = nrf52840
-CFLAGS += -DNRF52840_XXAA
-
-$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
-	adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
-
-# flash using adafruit-nrfutil dfu
-flash: $(BUILD)/$(PROJECT).zip
-	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
-	adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200
diff --git a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld
deleted file mode 100755
index 5314a4e9..00000000
--- a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Linker script to configure memory regions. */
-
-SEARCH_DIR(.)
-GROUP(-lgcc -lc -lnosys)
-
-MEMORY
-{
-  FLASH (rx)     : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000
-
-  /* SRAM required by S132 depend on
-   * - Attribute Table Size
-   * - Vendor UUID count
-   * - Max ATT MTU
-   * - Concurrent connection peripheral + central + secure links
-   * - Event Len, HVN queue, Write CMD queue
-   */ 
-  RAM (rwx) :  ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400
-}
-
-SECTIONS
-{
-  . = ALIGN(4);
-  .svc_data :
-  {
-    PROVIDE(__start_svc_data = .);
-    KEEP(*(.svc_data))
-    PROVIDE(__stop_svc_data = .);
-  } > RAM
-  
-  .fs_data :
-  {
-    PROVIDE(__start_fs_data = .);
-    KEEP(*(.fs_data))
-    PROVIDE(__stop_fs_data = .);
-  } > RAM
-} INSERT AFTER .data;
-
-INCLUDE "nrf52_common.ld"
diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.h
deleted file mode 100755
index 3208a948..00000000
--- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define _PINNUM(port, pin)    ((port)*32 + (pin))
-
-// LED
-#define LED_PIN         _PINNUM(1, 15)
-#define LED_STATE_ON    1
-
-// Button
-#define BUTTON_PIN      _PINNUM(1, 02)
-#define BUTTON_STATE_ACTIVE   0
-
-// UART
-#define UART_RX_PIN     24
-#define UART_TX_PIN     25
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk
deleted file mode 100755
index f31899eb..00000000
--- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-MCU_VARIANT = nrf52840
-CFLAGS += -DNRF52840_XXAA
-
-$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
-	adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
-
-# flash using adafruit-nrfutil dfu
-flash: $(BUILD)/$(PROJECT).zip
-	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
-	adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200
diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld
deleted file mode 100755
index 5314a4e9..00000000
--- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Linker script to configure memory regions. */
-
-SEARCH_DIR(.)
-GROUP(-lgcc -lc -lnosys)
-
-MEMORY
-{
-  FLASH (rx)     : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000
-
-  /* SRAM required by S132 depend on
-   * - Attribute Table Size
-   * - Vendor UUID count
-   * - Max ATT MTU
-   * - Concurrent connection peripheral + central + secure links
-   * - Event Len, HVN queue, Write CMD queue
-   */ 
-  RAM (rwx) :  ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400
-}
-
-SECTIONS
-{
-  . = ALIGN(4);
-  .svc_data :
-  {
-    PROVIDE(__start_svc_data = .);
-    KEEP(*(.svc_data))
-    PROVIDE(__stop_svc_data = .);
-  } > RAM
-  
-  .fs_data :
-  {
-    PROVIDE(__start_fs_data = .);
-    KEEP(*(.fs_data))
-    PROVIDE(__stop_fs_data = .);
-  } > RAM
-} INSERT AFTER .data;
-
-INCLUDE "nrf52_common.ld"
diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h
deleted file mode 100755
index ece6e34c..00000000
--- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define _PINNUM(port, pin)    ((port)*32 + (pin))
-
-// LED
-#define LED_PIN         _PINNUM(1, 9)
-#define LED_STATE_ON    1
-
-// Button
-#define BUTTON_PIN      _PINNUM(1, 02)
-#define BUTTON_STATE_ACTIVE   0
-
-// UART
-#define UART_RX_PIN     24
-#define UART_TX_PIN     25
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk
deleted file mode 100755
index f31899eb..00000000
--- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-MCU_VARIANT = nrf52840
-CFLAGS += -DNRF52840_XXAA
-
-$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
-	adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
-
-# flash using adafruit-nrfutil dfu
-flash: $(BUILD)/$(PROJECT).zip
-	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
-	adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200
diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld
deleted file mode 100755
index 5314a4e9..00000000
--- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Linker script to configure memory regions. */
-
-SEARCH_DIR(.)
-GROUP(-lgcc -lc -lnosys)
-
-MEMORY
-{
-  FLASH (rx)     : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000
-
-  /* SRAM required by S132 depend on
-   * - Attribute Table Size
-   * - Vendor UUID count
-   * - Max ATT MTU
-   * - Concurrent connection peripheral + central + secure links
-   * - Event Len, HVN queue, Write CMD queue
-   */ 
-  RAM (rwx) :  ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400
-}
-
-SECTIONS
-{
-  . = ALIGN(4);
-  .svc_data :
-  {
-    PROVIDE(__start_svc_data = .);
-    KEEP(*(.svc_data))
-    PROVIDE(__stop_svc_data = .);
-  } > RAM
-  
-  .fs_data :
-  {
-    PROVIDE(__start_fs_data = .);
-    KEEP(*(.fs_data))
-    PROVIDE(__stop_fs_data = .);
-  } > RAM
-} INSERT AFTER .data;
-
-INCLUDE "nrf52_common.ld"
diff --git a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h
deleted file mode 100755
index 132173a8..00000000
--- a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define _PINNUM(port, pin)    ((port)*32 + (pin))
-
-// LED
-#define LED_PIN         _PINNUM(0, 6)
-#define LED_STATE_ON    1
-
-// Button
-#define BUTTON_PIN      _PINNUM(0, 29)
-#define BUTTON_STATE_ACTIVE   0
-
-// UART
-#define UART_RX_PIN     25
-#define UART_TX_PIN     24
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk
deleted file mode 100755
index f31899eb..00000000
--- a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-MCU_VARIANT = nrf52840
-CFLAGS += -DNRF52840_XXAA
-
-$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
-	adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
-
-# flash using adafruit-nrfutil dfu
-flash: $(BUILD)/$(PROJECT).zip
-	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
-	adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200
diff --git a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld
deleted file mode 100755
index 5314a4e9..00000000
--- a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Linker script to configure memory regions. */
-
-SEARCH_DIR(.)
-GROUP(-lgcc -lc -lnosys)
-
-MEMORY
-{
-  FLASH (rx)     : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000
-
-  /* SRAM required by S132 depend on
-   * - Attribute Table Size
-   * - Vendor UUID count
-   * - Max ATT MTU
-   * - Concurrent connection peripheral + central + secure links
-   * - Event Len, HVN queue, Write CMD queue
-   */ 
-  RAM (rwx) :  ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400
-}
-
-SECTIONS
-{
-  . = ALIGN(4);
-  .svc_data :
-  {
-    PROVIDE(__start_svc_data = .);
-    KEEP(*(.svc_data))
-    PROVIDE(__stop_svc_data = .);
-  } > RAM
-  
-  .fs_data :
-  {
-    PROVIDE(__start_fs_data = .);
-    KEEP(*(.fs_data))
-    PROVIDE(__stop_fs_data = .);
-  } > RAM
-} INSERT AFTER .data;
-
-INCLUDE "nrf52_common.ld"
diff --git a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h
deleted file mode 100755
index 01dd1f24..00000000
--- a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define _PINNUM(port, pin)    ((port)*32 + (pin))
-
-// LED
-#define LED_PIN               _PINNUM(0, 23)
-#define LED_STATE_ON          0
-
-// Button
-#define BUTTON_PIN            _PINNUM(0, 18)
-#define BUTTON_STATE_ACTIVE   0
-
-// UART
-#define UART_RX_PIN           2
-#define UART_TX_PIN           3
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk
deleted file mode 100755
index 3afa234a..00000000
--- a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-MCU_VARIANT = nrf52840
-CFLAGS += -DNRF52840_XXAA
-
-LD_FILE = $(BOARD_PATH)/$(BOARD).ld
-
-# flash using Nordic nrfutil (pip3 install nrfutil)
-# 	make BOARD=nrf52840_mdk_dongle SERIAL=/dev/ttyACM0 all flash
-NRFUTIL = nrfutil
-
-$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
-	$(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@
-
-flash: $(BUILD)/$(PROJECT).zip
-	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
-	$(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200
\ No newline at end of file
diff --git a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld
deleted file mode 100755
index 78eddc9c..00000000
--- a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Linker script to configure memory regions. */
-
-SEARCH_DIR(.)
-GROUP(-lgcc -lc -lnosys)
-
-MEMORY
-{
-  FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xE0000-0x1000
-  RAM (rwx) :  ORIGIN = 0x20000008, LENGTH = 0x3fff8
-}
-
-
-INCLUDE "nrf_common.ld"
diff --git a/tinyusb/hw/bsp/nrf/boards/pca10056/board.h b/tinyusb/hw/bsp/nrf/boards/pca10056/board.h
deleted file mode 100755
index ab12d21a..00000000
--- a/tinyusb/hw/bsp/nrf/boards/pca10056/board.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-// LED
-#define LED_PIN               13
-#define LED_STATE_ON          0
-
-// Button
-#define BUTTON_PIN            11
-#define BUTTON_STATE_ACTIVE   0
-
-// UART
-#define UART_RX_PIN           8
-#define UART_TX_PIN           6
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/pca10056/board.mk b/tinyusb/hw/bsp/nrf/boards/pca10056/board.mk
deleted file mode 100755
index be2ed331..00000000
--- a/tinyusb/hw/bsp/nrf/boards/pca10056/board.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-MCU_VARIANT = nrf52840
-CFLAGS += -DNRF52840_XXAA
-
-LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld
-
-# flash using jlink
-flash: flash-jlink
diff --git a/tinyusb/hw/bsp/nrf/boards/pca10059/board.h b/tinyusb/hw/bsp/nrf/boards/pca10059/board.h
deleted file mode 100755
index 0810be64..00000000
--- a/tinyusb/hw/bsp/nrf/boards/pca10059/board.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define _PINNUM(port, pin)    ((port)*32 + (pin))
-
-// LED
-#define LED_PIN               8
-#define LED_STATE_ON          0
-
-// Button
-#define BUTTON_PIN            _PINNUM(1, 6)
-#define BUTTON_STATE_ACTIVE   0
-
-// UART
-#define UART_RX_PIN           8
-#define UART_TX_PIN           6
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/pca10059/board.mk b/tinyusb/hw/bsp/nrf/boards/pca10059/board.mk
deleted file mode 100755
index 0b82ecdb..00000000
--- a/tinyusb/hw/bsp/nrf/boards/pca10059/board.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-MCU_VARIANT = nrf52840
-CFLAGS += -DNRF52840_XXAA
-
-LD_FILE = $(BOARD_PATH)/$(BOARD).ld
-
-# flash using Nordic nrfutil (pip2 install nrfutil)
-# 	make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash
-NRFUTIL = nrfutil
-
-$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
-	$(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@
-
-flash: $(BUILD)/$(PROJECT).zip
-	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
-	$(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200
diff --git a/tinyusb/hw/bsp/nrf/boards/pca10059/pca10059.ld b/tinyusb/hw/bsp/nrf/boards/pca10059/pca10059.ld
deleted file mode 100755
index 510bfdd8..00000000
--- a/tinyusb/hw/bsp/nrf/boards/pca10059/pca10059.ld
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Linker script to configure memory regions. */
-
-SEARCH_DIR(.)
-GROUP(-lgcc -lc -lnosys)
-
-MEMORY
-{
-  FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xff000
-  RAM (rwx) :  ORIGIN = 0x20000008, LENGTH = 0x3fff8
-}
-
-
-INCLUDE "nrf_common.ld"
diff --git a/tinyusb/hw/bsp/nrf/boards/pca10100/board.h b/tinyusb/hw/bsp/nrf/boards/pca10100/board.h
deleted file mode 100755
index 88113303..00000000
--- a/tinyusb/hw/bsp/nrf/boards/pca10100/board.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define _PINNUM(port, pin)    ((port)*32 + (pin))
-
-// LED
-#define LED_PIN               13
-#define LED_STATE_ON          0
-
-// Button
-#define BUTTON_PIN            11
-#define BUTTON_STATE_ACTIVE   0
-
-// UART
-#define UART_RX_PIN           8
-#define UART_TX_PIN           6
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/pca10100/board.mk b/tinyusb/hw/bsp/nrf/boards/pca10100/board.mk
deleted file mode 100755
index 5fba269b..00000000
--- a/tinyusb/hw/bsp/nrf/boards/pca10100/board.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-MCU_VARIANT = nrf52833
-CFLAGS += -DNRF52833_XXAA
-
-LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52833_xxaa.ld
-
-# flash using jlink
-flash: flash-jlink
diff --git a/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h b/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h
deleted file mode 100755
index dcf829d9..00000000
--- a/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define _PINNUM(port, pin)    ((port)*32 + (pin))
-
-// LED
-#define LED_PIN               _PINNUM(1, 13)
-#define LED_STATE_ON          0
-
-// Button
-#define BUTTON_PIN            _PINNUM(0, 15)
-#define BUTTON_STATE_ACTIVE   0
-
-// UART
-#define UART_RX_PIN     25
-#define UART_TX_PIN     24
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* BOARD_H_ */
diff --git a/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk b/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk
deleted file mode 100755
index be2ed331..00000000
--- a/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-MCU_VARIANT = nrf52840
-CFLAGS += -DNRF52840_XXAA
-
-LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld
-
-# flash using jlink
-flash: flash-jlink
diff --git a/tinyusb/hw/bsp/nrf/family.c b/tinyusb/hw/bsp/nrf/family.c
deleted file mode 100755
index ed742daa..00000000
--- a/tinyusb/hw/bsp/nrf/family.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include "bsp/board.h"
-#include "board.h"
-
-#include "nrfx.h"
-#include "nrfx/hal/nrf_gpio.h"
-#include "nrfx/drivers/include/nrfx_power.h"
-#include "nrfx/drivers/include/nrfx_uarte.h"
-
-#ifdef SOFTDEVICE_PRESENT
-#include "nrf_sdm.h"
-#include "nrf_soc.h"
-#endif
-
-//--------------------------------------------------------------------+
-// Forward USB interrupt events to TinyUSB IRQ Handler
-//--------------------------------------------------------------------+
-void USBD_IRQHandler(void)
-{
-  tud_int_handler(0);
-}
-
-/*------------------------------------------------------------------*/
-/* MACRO TYPEDEF CONSTANT ENUM
- *------------------------------------------------------------------*/
-
-static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0);
-
-// tinyusb function that handles power event (detected, ready, removed)
-// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled.
-extern void tusb_hal_nrf_power_event(uint32_t event);
-
-
-// nrf power callback, could be unused if SD is enabled or usb is disabled (board_test example)
-TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event)
-{
-  tusb_hal_nrf_power_event((uint32_t) event);
-}
-
-void board_init(void)
-{
-  // stop LF clock just in case we jump from application without reset
-  NRF_CLOCK->TASKS_LFCLKSTOP = 1UL;
-
-  // Use Internal OSC to compatible with all boards
-  NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_RC;
-  NRF_CLOCK->TASKS_LFCLKSTART = 1UL;
-
-  // LED
-  nrf_gpio_cfg_output(LED_PIN);
-  board_led_write(false);
-
-  // Button
-  nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP);
-
-  // 1ms tick timer
-  SysTick_Config(SystemCoreClock/1000);
-
-  // UART
-  nrfx_uarte_config_t uart_cfg =
-  {
-    .pseltxd   = UART_TX_PIN,
-    .pselrxd   = UART_RX_PIN,
-    .pselcts   = NRF_UARTE_PSEL_DISCONNECTED,
-    .pselrts   = NRF_UARTE_PSEL_DISCONNECTED,
-    .p_context = NULL,
-    .baudrate  = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE
-    .interrupt_priority = 7,
-    .hal_cfg = {
-      .hwfc      = NRF_UARTE_HWFC_DISABLED,
-      .parity    = NRF_UARTE_PARITY_EXCLUDED,
-    }
-  };
-
-  nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler);
-
-  //------------- USB -------------//
-#if TUSB_OPT_DEVICE_ENABLED
-  // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice
-  // 2 is highest for application
-  NVIC_SetPriority(USBD_IRQn, 2);
-
-  // USB power may already be ready at this time -> no event generated
-  // We need to invoke the handler based on the status initially
-  uint32_t usb_reg;
-
-#ifdef SOFTDEVICE_PRESENT
-  uint8_t sd_en = false;
-  sd_softdevice_is_enabled(&sd_en);
-
-  if ( sd_en ) {
-    sd_power_usbdetected_enable(true);
-    sd_power_usbpwrrdy_enable(true);
-    sd_power_usbremoved_enable(true);
-
-    sd_power_usbregstatus_get(&usb_reg);
-  }else
-#endif
-  {
-    // Power module init
-    const nrfx_power_config_t pwr_cfg = { 0 };
-    nrfx_power_init(&pwr_cfg);
-
-    // Register tusb function as USB power handler
-    // cause cast-function-type warning
-    const nrfx_power_usbevt_config_t config = { .handler = power_event_handler };
-    nrfx_power_usbevt_init(&config);
-
-    nrfx_power_usbevt_enable();
-
-    usb_reg = NRF_POWER->USBREGSTATUS;
-  }
-
-  if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED);
-  if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk  ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY);
-#endif
-}
-
-//--------------------------------------------------------------------+
-// Board porting API
-//--------------------------------------------------------------------+
-
-void board_led_write(bool state)
-{
-  nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
-}
-
-uint32_t board_button_read(void)
-{
-  return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN);
-}
-
-int board_uart_read(uint8_t* buf, int len)
-{
-  (void) buf; (void) len;
-  return 0;
-//  return NRFX_SUCCESS == nrfx_uart_rx(&_uart_id, buf, (size_t) len) ? len : 0;
-}
-
-int board_uart_write(void const * buf, int len)
-{
-  return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0;
-}
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-void SysTick_Handler (void)
-{
-  system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-  return system_ticks;
-}
-#endif
-
-#ifdef SOFTDEVICE_PRESENT
-// process SOC event from SD
-uint32_t proc_soc(void)
-{
-  uint32_t soc_evt;
-  uint32_t err = sd_evt_get(&soc_evt);
-
-  if (NRF_SUCCESS == err)
-  {
-    /*------------- usb power event handler -------------*/
-    int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED   ) ? NRFX_POWER_USB_EVT_DETECTED:
-                     (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY   :
-                     (soc_evt == NRF_EVT_POWER_USB_REMOVED    ) ? NRFX_POWER_USB_EVT_REMOVED : -1;
-
-    if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt);
-  }
-
-  return err;
-}
-
-uint32_t proc_ble(void)
-{
-  // do nothing with ble
-  return NRF_ERROR_NOT_FOUND;
-}
-
-void SD_EVT_IRQHandler(void)
-{
-  // process BLE and SOC until there is no more events
-  while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) )
-  {
-
-  }
-}
-
-void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info)
-{
-  (void) id;
-  (void) pc;
-  (void) info;
-}
-#endif
diff --git a/tinyusb/hw/bsp/nrf/family.mk b/tinyusb/hw/bsp/nrf/family.mk
deleted file mode 100755
index d1afd258..00000000
--- a/tinyusb/hw/bsp/nrf/family.mk
+++ /dev/null
@@ -1,60 +0,0 @@
-UF2_FAMILY_ID = 0xADA52840
-DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/nordic/nrfx
-
-include $(TOP)/$(BOARD_PATH)/board.mk
-
-CFLAGS += \
-  -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
-  -DCFG_TUSB_MCU=OPT_MCU_NRF5X \
-  -DCONFIG_GPIO_AS_PINRESET
-
-# suppress warning caused by vendor mcu driver
-CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align
-
-# due to tusb_hal_nrf_power_event
-GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion)))
-ifeq ($(CMDEXE),1)
-  ifeq ($(shell if $(GCCVERSION) geq 8 echo 1), 1)
-  CFLAGS += -Wno-error=cast-function-type
-  endif
-else
-  ifeq ($(shell expr $(GCCVERSION) \>= 8), 1)
-  CFLAGS += -Wno-error=cast-function-type
-  endif
-endif
-
-# All source paths should be relative to the top level.
-LD_FILE ?= hw/bsp/nrf/boards/$(BOARD)/nrf52840_s140_v6.ld
-
-LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk
-
-SRC_C += \
-  src/portable/nordic/nrf5x/dcd_nrf5x.c \
-  hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \
-  hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \
-  hw/mcu/nordic/nrfx/mdk/system_$(MCU_VARIANT).c
-
-INC += \
-  $(TOP)/$(BOARD_PATH) \
-  $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
-  $(TOP)/hw/mcu/nordic \
-  $(TOP)/hw/mcu/nordic/nrfx \
-  $(TOP)/hw/mcu/nordic/nrfx/mdk \
-  $(TOP)/hw/mcu/nordic/nrfx/hal \
-  $(TOP)/hw/mcu/nordic/nrfx/drivers/include \
-  $(TOP)/hw/mcu/nordic/nrfx/drivers/src \
-
-SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_$(MCU_VARIANT).S
-
-ASFLAGS += -D__HEAP_SIZE=0
-
-# For freeRTOS port source
-FREERTOS_PORT = ARM_CM4F
-
-# For flash-jlink target
-JLINK_DEVICE = $(MCU_VARIANT)_xxaa