diff options
author | joeycastillo <joeycastillo@utexas.edu> | 2021-12-08 15:52:07 -0500 |
---|---|---|
committer | GitHub <noreply@github.com> | 2021-12-08 15:52:07 -0500 |
commit | c0d02ceddd233ccccd4926b6eb5b6fe54771aac0 (patch) | |
tree | 88c257f6b70111b4ae09fd8518e38e9197cd2a4e /tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h | |
parent | c25b6929cd4a3db9daa33738350b969ec590cd28 (diff) | |
parent | d33d3fbd51253e3e072186a71959fdf97c8d2e75 (diff) | |
download | Sensor-Watch-c0d02ceddd233ccccd4926b6eb5b6fe54771aac0.tar.gz Sensor-Watch-c0d02ceddd233ccccd4926b6eb5b6fe54771aac0.tar.bz2 Sensor-Watch-c0d02ceddd233ccccd4926b6eb5b6fe54771aac0.zip |
Merge pull request #25 from willianpaixao/add-submodules
Add tinyusb as git submodules
Diffstat (limited to 'tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h')
m--------- | tinyusb | 0 | ||||
-rwxr-xr-x | tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h | 116 |
2 files changed, 0 insertions, 116 deletions
diff --git a/tinyusb b/tinyusb new file mode 160000 +Subproject f8288be03f28ad7b944e6925f49422dfa39202c diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h b/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h deleted file mode 100755 index 3a31783a..00000000 --- a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_0 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - -#define UART_DEV USART3 -#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* The PWR block is always enabled on the H7 series- there is no clock - enable. For now, use the default VOS3 scale mode (lowest) and limit clock - frequencies to avoid potential current draw problems from bus - power when using the max clock speeds throughout the chip. */ - - /* Enable HSE Oscillator and activate PLL1 with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSIState = RCC_HSI_OFF; - RCC_OscInitStruct.CSIState = RCC_CSI_OFF; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 336; - RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLQ = 7; - RCC_OscInitStruct.PLL.PLLR = 2; /* Unused */ - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_0; - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; - RCC_OscInitStruct.PLL.PLLFRACN = 0; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | \ - RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | \ - RCC_CLOCKTYPE_D3PCLK1); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; - - /* Unlike on the STM32F4 family, it appears the maximum APB frequencies are - device-dependent- 120 MHz for this board according to Figure 2 of - the datasheet. Dividing by half will be safe for now. */ - RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; - RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; - - /* 4 wait states required for 168MHz and VOS3. */ - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); - - /* Like on F4, on H7, USB's actual peripheral clock and bus clock are - separate. However, the main system PLL (PLL1) doesn't have a direct - connection to the USB peripheral clock to generate 48 MHz, so we do this - dance. This will connect PLL1's Q output to the USB peripheral clock. */ - RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct; - - RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - RCC_PeriphCLKInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL; - HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct); -} - -#ifdef __cplusplus - } -#endif - -#endif |