diff options
author | Willian Paixao <willian@ufpa.br> | 2021-12-05 19:16:34 +0100 |
---|---|---|
committer | Willian Paixao <willian@ufpa.br> | 2021-12-05 19:16:34 +0100 |
commit | ac2e205ae9f465c27297ea542c72e8cfe4966f8c (patch) | |
tree | 16e4d1268b2631ba7e17dcda8f366f070fbd7475 /tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h | |
parent | bbd394a19aaa334a179c36cf2ed2a066f1bb312c (diff) | |
download | Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.tar.gz Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.tar.bz2 Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.zip |
remove tinyusb directory
Diffstat (limited to 'tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h')
-rwxr-xr-x | tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h | 134 |
1 files changed, 0 insertions, 134 deletions
diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h b/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h deleted file mode 100755 index 30a7a9ff..00000000 --- a/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOJ -#define LED_PIN GPIO_PIN_2 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - -// UART -#define UART_DEV USART3 -#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - - /*!< Supply configuration update enable */ - /* For STM32H750XB, use "HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);" */ - HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY); - - /* The voltage scaling allows optimizing the power consumption when the - device is clocked below the maximum system frequency, to update the - voltage scaling value regarding system frequency refer to product - datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.HSIState = RCC_HSI_OFF; - RCC_OscInitStruct.CSIState = RCC_CSI_OFF; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - - /* PLL1 for System Clock */ - RCC_OscInitStruct.PLL.PLLM = 5; - RCC_OscInitStruct.PLL.PLLN = 160; - RCC_OscInitStruct.PLL.PLLFRACN = 0; - RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLR = 2; - RCC_OscInitStruct.PLL.PLLQ = 4; - - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* PLL3 for USB Clock */ - PeriphClkInitStruct.PLL3.PLL3M = 25; - PeriphClkInitStruct.PLL3.PLL3N = 336; - PeriphClkInitStruct.PLL3.PLL3FRACN = 0; - PeriphClkInitStruct.PLL3.PLL3P = 2; - PeriphClkInitStruct.PLL3.PLL3R = 2; - PeriphClkInitStruct.PLL3.PLL3Q = 7; - - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select PLL as system clock source and configure bus clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ - RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); - - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; - RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); - - /*activate CSI clock mondatory for I/O Compensation Cell*/ - __HAL_RCC_CSI_ENABLE() ; - - /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ - __HAL_RCC_SYSCFG_CLK_ENABLE() ; - - /* Enables the I/O Compensation Cell */ - HAL_EnableCompensationCell(); -} - -#ifdef __cplusplus - } -#endif - -#endif |