diff options
author | joeycastillo <joeycastillo@utexas.edu> | 2021-08-30 14:42:11 -0400 |
---|---|---|
committer | GitHub <noreply@github.com> | 2021-08-30 14:42:11 -0400 |
commit | eb3d9b26cbda2d2612f11eb39843b221224f1fa7 (patch) | |
tree | 7a514b4d21dd0d2a324a5e1313a144f26bf20799 /tinyusb/src/portable/microchip/samg/dcd_samg.c | |
parent | ee9cc322d301631c9ff0751d9bed717c6492b6a5 (diff) | |
parent | b0845cc3f1a8234a30c980eccf10e44765e4e105 (diff) | |
download | Sensor-Watch-eb3d9b26cbda2d2612f11eb39843b221224f1fa7.tar.gz Sensor-Watch-eb3d9b26cbda2d2612f11eb39843b221224f1fa7.tar.bz2 Sensor-Watch-eb3d9b26cbda2d2612f11eb39843b221224f1fa7.zip |
Merge pull request #9 from joeycastillo/usb-refactor
USB refactor / Makefile simplification
Diffstat (limited to 'tinyusb/src/portable/microchip/samg/dcd_samg.c')
-rwxr-xr-x | tinyusb/src/portable/microchip/samg/dcd_samg.c | 486 |
1 files changed, 486 insertions, 0 deletions
diff --git a/tinyusb/src/portable/microchip/samg/dcd_samg.c b/tinyusb/src/portable/microchip/samg/dcd_samg.c new file mode 100755 index 00000000..d50621ce --- /dev/null +++ b/tinyusb/src/portable/microchip/samg/dcd_samg.c @@ -0,0 +1,486 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUSB_MCU == OPT_MCU_SAMG + +#include "sam.h" +#include "device/dcd.h" + +// TODO should support (SAM3S || SAM4S || SAM4E || SAMG55) + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +#define EP_COUNT 6 + +// Transfer descriptor +typedef struct +{ + uint8_t* buffer; + // tu_fifo_t* ff; // TODO support dcd_edpt_xfer_fifo API + uint16_t total_len; + volatile uint16_t actual_len; + uint16_t epsize; +} xfer_desc_t; + +// Endpoint 0-5, each can only be either OUT or In +xfer_desc_t _dcd_xfer[EP_COUNT]; + +void xfer_epsize_set(xfer_desc_t* xfer, uint16_t epsize) +{ + xfer->epsize = epsize; +} + +void xfer_begin(xfer_desc_t* xfer, uint8_t * buffer, uint16_t total_bytes) +{ + xfer->buffer = buffer; + // xfer->ff = NULL; // TODO support dcd_edpt_xfer_fifo API + xfer->total_len = total_bytes; + xfer->actual_len = 0; +} + +void xfer_end(xfer_desc_t* xfer) +{ + xfer->buffer = NULL; + // xfer->ff = NULL; // TODO support dcd_edpt_xfer_fifo API + xfer->total_len = 0; + xfer->actual_len = 0; +} + +uint16_t xfer_packet_len(xfer_desc_t* xfer) +{ + // also cover zero-length packet + return tu_min16(xfer->total_len - xfer->actual_len, xfer->epsize); +} + +void xfer_packet_done(xfer_desc_t* xfer) +{ + uint16_t const xact_len = xfer_packet_len(xfer); + + xfer->buffer += xact_len; + xfer->actual_len += xact_len; +} + +//------------- Transaction helpers -------------// + +// Write data to EP FIFO, return number of written bytes +static void xact_ep_write(uint8_t epnum, uint8_t* buffer, uint16_t xact_len) +{ + for(uint16_t i=0; i<xact_len; i++) + { + UDP->UDP_FDR[epnum] = (uint32_t) buffer[i]; + } +} + +// Read data from EP FIFO +static void xact_ep_read(uint8_t epnum, uint8_t* buffer, uint16_t xact_len) +{ + for(uint16_t i=0; i<xact_len; i++) + { + buffer[i] = (uint8_t) UDP->UDP_FDR[epnum]; + } +} + + +//! Bitmap for all status bits in CSR that are not affected by a value 1. +#define CSR_NO_EFFECT_1_ALL (UDP_CSR_RX_DATA_BK0 | UDP_CSR_RX_DATA_BK1 | UDP_CSR_STALLSENT | UDP_CSR_RXSETUP | UDP_CSR_TXCOMP) + +// Per Specs: CSR need synchronization each write +static inline void csr_write(uint8_t epnum, uint32_t value) +{ + uint32_t const csr = value; + UDP->UDP_CSR[epnum] = csr; + + volatile uint32_t nop_count; + for (nop_count = 0; nop_count < 20; nop_count ++) __NOP(); +} + +// Per Specs: CSR need synchronization each write +static inline void csr_set(uint8_t epnum, uint32_t mask) +{ + csr_write(epnum, UDP->UDP_CSR[epnum] | CSR_NO_EFFECT_1_ALL | mask); +} + +// Per Specs: CSR need synchronization each write +static inline void csr_clear(uint8_t epnum, uint32_t mask) +{ + csr_write(epnum, (UDP->UDP_CSR[epnum] | CSR_NO_EFFECT_1_ALL) & ~mask); +} + +/*------------------------------------------------------------------*/ +/* Device API + *------------------------------------------------------------------*/ + +// Set up endpoint 0, clear all other endpoints +static void bus_reset(void) +{ + tu_memclr(_dcd_xfer, sizeof(_dcd_xfer)); + + xfer_epsize_set(&_dcd_xfer[0], CFG_TUD_ENDPOINT0_SIZE); + + // Enable EP0 control + csr_write(0, UDP_CSR_EPEDS_Msk); + + // Enable interrupt : EP0, Suspend, Resume, Wakeup + UDP->UDP_IER = UDP_IER_EP0INT_Msk | UDP_IER_RXSUSP_Msk | UDP_IER_RXRSM_Msk | UDP_IER_WAKEUP_Msk; + + // Enable transceiver + UDP->UDP_TXVC &= ~UDP_TXVC_TXVDIS_Msk; +} + +// Initialize controller to device mode +void dcd_init (uint8_t rhport) +{ + tu_memclr(_dcd_xfer, sizeof(_dcd_xfer)); + dcd_connect(rhport); +} + +// Enable device interrupt +void dcd_int_enable (uint8_t rhport) +{ + (void) rhport; + NVIC_EnableIRQ(UDP_IRQn); +} + +// Disable device interrupt +void dcd_int_disable (uint8_t rhport) +{ + (void) rhport; + NVIC_DisableIRQ(UDP_IRQn); +} + +// Receive Set Address request, mcu port must also include status IN response +void dcd_set_address (uint8_t rhport, uint8_t dev_addr) +{ + (void) rhport; + (void) dev_addr; + + // Response with zlp status + dcd_edpt_xfer(rhport, 0x80, NULL, 0); + + // DCD can only set address after status for this request is complete. + // do it at dcd_edpt0_status_complete() +} + +// Wake up host +void dcd_remote_wakeup (uint8_t rhport) +{ + (void) rhport; +} + +void dcd_connect(uint8_t rhport) +{ + (void) rhport; + + // Enable pull-up, disable transceiver + UDP->UDP_TXVC = UDP_TXVC_PUON | UDP_TXVC_TXVDIS_Msk; +} + +void dcd_disconnect(uint8_t rhport) +{ + (void) rhport; + + // disable both pullup and transceiver + UDP->UDP_TXVC = UDP_TXVC_TXVDIS_Msk; +} + +//--------------------------------------------------------------------+ +// Endpoint API +//--------------------------------------------------------------------+ + +// Invoked when a control transfer's status stage is complete. +// May help DCD to prepare for next control transfer, this API is optional. +void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * request) +{ + (void) rhport; + + if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && + request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD ) + { + if (request->bRequest == TUSB_REQ_SET_ADDRESS) + { + uint8_t const dev_addr = (uint8_t) request->wValue; + + // Enable addressed state + UDP->UDP_GLB_STAT |= UDP_GLB_STAT_FADDEN_Msk; + + // Set new address & Function enable bit + UDP->UDP_FADDR = UDP_FADDR_FEN_Msk | UDP_FADDR_FADD(dev_addr); + } + else if (request->bRequest == TUSB_REQ_SET_CONFIGURATION) + { + // Configured State + UDP->UDP_GLB_STAT |= UDP_GLB_STAT_CONFG_Msk; + } + } +} + +// Configure endpoint's registers according to descriptor +// SAMG doesn't support a same endpoint number with IN and OUT +// e.g EP1 OUT & EP1 IN cannot exist together +bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) +{ + (void) rhport; + + uint8_t const epnum = tu_edpt_number(ep_desc->bEndpointAddress); + uint8_t const dir = tu_edpt_dir(ep_desc->bEndpointAddress); + + // TODO Isochronous is not supported yet + TU_VERIFY(ep_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS); + TU_VERIFY(epnum < EP_COUNT); + + // Must not already enabled + TU_ASSERT((UDP->UDP_CSR[epnum] & UDP_CSR_EPEDS_Msk) == 0); + + xfer_epsize_set(&_dcd_xfer[epnum], ep_desc->wMaxPacketSize.size); + + // Configure type and enable EP + csr_write(epnum, UDP_CSR_EPEDS_Msk | UDP_CSR_EPTYPE(ep_desc->bmAttributes.xfer + 4*dir)); + + // Enable EP Interrupt for IN + if (dir == TUSB_DIR_IN) UDP->UDP_IER |= (1 << epnum); + + return true; +} + +// Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack +bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +{ + (void) rhport; + + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + xfer_desc_t* xfer = &_dcd_xfer[epnum]; + xfer_begin(xfer, buffer, total_bytes); + + if (dir == TUSB_DIR_OUT) + { + // Enable interrupt when starting OUT transfer + if (epnum != 0) UDP->UDP_IER |= (1 << epnum); + } + else + { + xact_ep_write(epnum, xfer->buffer, xfer_packet_len(xfer)); + + // TX ready for transfer + csr_set(epnum, UDP_CSR_TXPKTRDY_Msk); + } + + return true; +} + +#if 0 // TODO support dcd_edpt_xfer_fifo API +bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +{ + (void) rhport; + return true; +} +#endif + +// Stall endpoint +void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + + // For EP0 USBD will stall both EP0 Out and In with 0x00 and 0x80 + // only handle one by skipping 0x80 + if ( ep_addr == tu_edpt_addr(0, TUSB_DIR_IN_MASK) ) return; + + uint8_t const epnum = tu_edpt_number(ep_addr); + + // Set force stall bit + csr_set(epnum, UDP_CSR_FORCESTALL_Msk); +} + +// clear stall, data toggle is also reset to DATA0 +void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + + uint8_t const epnum = tu_edpt_number(ep_addr); + + // clear stall + csr_clear(epnum, UDP_CSR_FORCESTALL_Msk); + + // must also reset EP to clear data toggle + UDP->UDP_RST_EP |= (1 << epnum); + UDP->UDP_RST_EP &= ~(1 << epnum); +} + +//--------------------------------------------------------------------+ +// ISR +//--------------------------------------------------------------------+ +void dcd_int_handler(uint8_t rhport) +{ + uint32_t const intr_mask = UDP->UDP_IMR; + uint32_t const intr_status = UDP->UDP_ISR & intr_mask; + + // clear interrupt + UDP->UDP_ICR = intr_status; + + // Bus reset + if (intr_status & UDP_ISR_ENDBUSRES_Msk) + { + bus_reset(); + dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true); + } + + // SOF +// if (intr_status & UDP_ISR_SOFINT_Msk) dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); + + // Suspend + if (intr_status & UDP_ISR_RXSUSP_Msk) dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); + + // Resume + if (intr_status & UDP_ISR_RXRSM_Msk) dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); + + // Wakeup + if (intr_status & UDP_ISR_WAKEUP_Msk) dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); + + //------------- Endpoints -------------// + + if ( intr_status & TU_BIT(0) ) + { + // setup packet + if ( UDP->UDP_CSR[0] & UDP_CSR_RXSETUP ) + { + // get setup from FIFO + uint8_t setup[8]; + for(uint8_t i=0; i<sizeof(setup); i++) + { + setup[i] = (uint8_t) UDP->UDP_FDR[0]; + } + + // notify usbd + dcd_event_setup_received(rhport, setup, true); + + // Set EP direction bit according to DATA stage + // MUST only be set before RXSETUP is clear per specs + if ( tu_edpt_dir(setup[0]) ) + { + csr_set(0, UDP_CSR_DIR_Msk); + } + else + { + csr_clear(0, UDP_CSR_DIR_Msk); + } + + // Clear Setup, stall and other on-going transfer bits + csr_clear(0, UDP_CSR_RXSETUP_Msk | UDP_CSR_TXPKTRDY_Msk | UDP_CSR_TXCOMP_Msk | UDP_CSR_RX_DATA_BK0 | UDP_CSR_RX_DATA_BK1 | UDP_CSR_STALLSENT_Msk | UDP_CSR_FORCESTALL_Msk); + } + } + + for(uint8_t epnum = 0; epnum < EP_COUNT; epnum++) + { + if ( intr_status & TU_BIT(epnum) ) + { + xfer_desc_t* xfer = &_dcd_xfer[epnum]; + + //------------- Endpoint IN -------------// + if (UDP->UDP_CSR[epnum] & UDP_CSR_TXCOMP_Msk) + { + xfer_packet_done(xfer); + + uint16_t const xact_len = xfer_packet_len(xfer); + + if (xact_len) + { + // write to EP fifo +#if 0 // TODO support dcd_edpt_xfer_fifo + if (xfer->ff) + { + tu_fifo_read_n_const_addr_full_words(xfer->ff, (void *) &UDP->UDP_FDR[epnum], xact_len); + } + else +#endif + { + xact_ep_write(epnum, xfer->buffer, xact_len); + } + + // TX ready for transfer + csr_set(epnum, UDP_CSR_TXPKTRDY_Msk); + }else + { + // xfer is complete + dcd_event_xfer_complete(rhport, epnum | TUSB_DIR_IN_MASK, xfer->actual_len, XFER_RESULT_SUCCESS, true); + + // Required since control OUT can happen right after before stack handle this event + xfer_end(xfer); + } + + // Clear TX Complete bit + csr_clear(epnum, UDP_CSR_TXCOMP_Msk); + } + + //------------- Endpoint OUT -------------// + // Ping-Pong is a MUST for Bulk/Iso + // NOTE: When both Bank0 and Bank1 are both set, there is no way to know which one comes first + uint32_t const banks_complete = UDP->UDP_CSR[epnum] & (UDP_CSR_RX_DATA_BK0_Msk | UDP_CSR_RX_DATA_BK1_Msk); + if (banks_complete) + { + uint16_t const xact_len = (uint16_t) ((UDP->UDP_CSR[epnum] & UDP_CSR_RXBYTECNT_Msk) >> UDP_CSR_RXBYTECNT_Pos); + + // Read from EP fifo +#if 0 // TODO support dcd_edpt_xfer_fifo API + if (xfer->ff) + { + tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void *) &UDP->UDP_FDR[epnum], xact_len); + } + else +#endif + { + xact_ep_read(epnum, xfer->buffer, xact_len); + } + + xfer_packet_done(xfer); + + if ( 0 == xfer_packet_len(xfer) ) + { + // Disable OUT EP interrupt when transfer is complete + if (epnum != 0) UDP->UDP_IDR |= (1 << epnum); + + dcd_event_xfer_complete(rhport, epnum, xfer->actual_len, XFER_RESULT_SUCCESS, true); + xfer_end(xfer); + } + + // Clear DATA Bank0/1 bit + csr_clear(epnum, banks_complete); + } + + // Stall sent to host + if (UDP->UDP_CSR[epnum] & UDP_CSR_STALLSENT_Msk) + { + csr_clear(epnum, UDP_CSR_STALLSENT_Msk); + } + } + } +} + +#endif |