diff options
author | Willian Paixao <willian@ufpa.br> | 2021-12-05 19:16:34 +0100 |
---|---|---|
committer | Willian Paixao <willian@ufpa.br> | 2021-12-05 19:16:34 +0100 |
commit | ac2e205ae9f465c27297ea542c72e8cfe4966f8c (patch) | |
tree | 16e4d1268b2631ba7e17dcda8f366f070fbd7475 /tinyusb/src/portable/raspberrypi/rp2040/dcd_rp2040.c | |
parent | bbd394a19aaa334a179c36cf2ed2a066f1bb312c (diff) | |
download | Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.tar.gz Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.tar.bz2 Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.zip |
remove tinyusb directory
Diffstat (limited to 'tinyusb/src/portable/raspberrypi/rp2040/dcd_rp2040.c')
-rwxr-xr-x | tinyusb/src/portable/raspberrypi/rp2040/dcd_rp2040.c | 485 |
1 files changed, 0 insertions, 485 deletions
diff --git a/tinyusb/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/tinyusb/src/portable/raspberrypi/rp2040/dcd_rp2040.c deleted file mode 100755 index 49284e92..00000000 --- a/tinyusb/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ /dev/null @@ -1,485 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "tusb_option.h" - -#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_RP2040 - -#include "pico.h" -#include "rp2040_usb.h" - -#if TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX -#include "pico/fix/rp2040_usb_device_enumeration.h" -#endif - -#include "device/dcd.h" - -// Current implementation force vbus detection as always present, causing device think it is always plugged into host. -// Therefore it cannot detect disconnect event, mistaken it as suspend. -// Note: won't work if change to 0 (for now) -#define FORCE_VBUS_DETECT 1 - -/*------------------------------------------------------------------*/ -/* Low level controller - *------------------------------------------------------------------*/ - -#define usb_hw_set hw_set_alias(usb_hw) -#define usb_hw_clear hw_clear_alias(usb_hw) - -// Init these in dcd_init -static uint8_t *next_buffer_ptr; - -// USB_MAX_ENDPOINTS Endpoints, direction TUSB_DIR_OUT for out and TUSB_DIR_IN for in. -static struct hw_endpoint hw_endpoints[USB_MAX_ENDPOINTS][2]; - -static inline struct hw_endpoint *hw_endpoint_get_by_num(uint8_t num, tusb_dir_t dir) -{ - return &hw_endpoints[num][dir]; -} - -static struct hw_endpoint *hw_endpoint_get_by_addr(uint8_t ep_addr) -{ - uint8_t num = tu_edpt_number(ep_addr); - tusb_dir_t dir = tu_edpt_dir(ep_addr); - return hw_endpoint_get_by_num(num, dir); -} - -static void _hw_endpoint_alloc(struct hw_endpoint *ep, uint8_t transfer_type) -{ - // size must be multiple of 64 - uint16_t size = tu_div_ceil(ep->wMaxPacketSize, 64) * 64u; - - // double buffered Bulk endpoint - if ( transfer_type == TUSB_XFER_BULK ) - { - size *= 2u; - } - - ep->hw_data_buf = next_buffer_ptr; - next_buffer_ptr += size; - - assert(((uintptr_t )next_buffer_ptr & 0b111111u) == 0); - uint dpram_offset = hw_data_offset(ep->hw_data_buf); - assert(hw_data_offset(next_buffer_ptr) <= USB_DPRAM_MAX); - - pico_info(" Alloced %d bytes at offset 0x%x (0x%p)\r\n", size, dpram_offset, ep->hw_data_buf); - - // Fill in endpoint control register with buffer offset - uint32_t const reg = EP_CTRL_ENABLE_BITS | (transfer_type << EP_CTRL_BUFFER_TYPE_LSB) | dpram_offset; - - *ep->endpoint_control = reg; -} - -#if 0 // todo unused -static void _hw_endpoint_close(struct hw_endpoint *ep) -{ - // Clear hardware registers and then zero the struct - // Clears endpoint enable - *ep->endpoint_control = 0; - // Clears buffer available, etc - *ep->buffer_control = 0; - // Clear any endpoint state - memset(ep, 0, sizeof(struct hw_endpoint)); -} - -static void hw_endpoint_close(uint8_t ep_addr) -{ - struct hw_endpoint *ep = hw_endpoint_get_by_addr(ep_addr); - _hw_endpoint_close(ep); -} -#endif - -static void hw_endpoint_init(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type) -{ - struct hw_endpoint *ep = hw_endpoint_get_by_addr(ep_addr); - - const uint8_t num = tu_edpt_number(ep_addr); - const tusb_dir_t dir = tu_edpt_dir(ep_addr); - - ep->ep_addr = ep_addr; - - // For device, IN is a tx transfer and OUT is an rx transfer - ep->rx = (dir == TUSB_DIR_OUT); - - // Response to a setup packet on EP0 starts with pid of 1 - ep->next_pid = (num == 0 ? 1u : 0u); - - ep->wMaxPacketSize = wMaxPacketSize; - ep->transfer_type = transfer_type; - - // Every endpoint has a buffer control register in dpram - if ( dir == TUSB_DIR_IN ) - { - ep->buffer_control = &usb_dpram->ep_buf_ctrl[num].in; - } - else - { - ep->buffer_control = &usb_dpram->ep_buf_ctrl[num].out; - } - - // Clear existing buffer control state - *ep->buffer_control = 0; - - if ( num == 0 ) - { - // EP0 has no endpoint control register because - // the buffer offsets are fixed - ep->endpoint_control = NULL; - - // Buffer offset is fixed (also double buffered) - ep->hw_data_buf = (uint8_t*) &usb_dpram->ep0_buf_a[0]; - } - else - { - // Set the endpoint control register (starts at EP1, hence num-1) - if ( dir == TUSB_DIR_IN ) - { - ep->endpoint_control = &usb_dpram->ep_ctrl[num - 1].in; - } - else - { - ep->endpoint_control = &usb_dpram->ep_ctrl[num - 1].out; - } - - // alloc a buffer and fill in endpoint control register - _hw_endpoint_alloc(ep, transfer_type); - } -} - -static void hw_endpoint_xfer(uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) -{ - struct hw_endpoint *ep = hw_endpoint_get_by_addr(ep_addr); - hw_endpoint_xfer_start(ep, buffer, total_bytes); -} - -static void hw_handle_buff_status(void) -{ - uint32_t remaining_buffers = usb_hw->buf_status; - pico_trace("buf_status 0x%08x\n", remaining_buffers); - uint bit = 1u; - for (uint i = 0; remaining_buffers && i < USB_MAX_ENDPOINTS * 2; i++) - { - if (remaining_buffers & bit) - { - // clear this in advance - usb_hw_clear->buf_status = bit; - // IN transfer for even i, OUT transfer for odd i - struct hw_endpoint *ep = hw_endpoint_get_by_num(i >> 1u, !(i & 1u)); - // Continue xfer - bool done = hw_endpoint_xfer_continue(ep); - if (done) - { - // Notify - dcd_event_xfer_complete(0, ep->ep_addr, ep->xferred_len, XFER_RESULT_SUCCESS, true); - hw_endpoint_reset_transfer(ep); - } - remaining_buffers &= ~bit; - } - bit <<= 1u; - } -} - -static void reset_ep0(void) -{ - // If we have finished this transfer on EP0 set pid back to 1 for next - // setup transfer. Also clear a stall in case - uint8_t addrs[] = {0x0, 0x80}; - for (uint i = 0 ; i < TU_ARRAY_SIZE(addrs); i++) - { - struct hw_endpoint *ep = hw_endpoint_get_by_addr(addrs[i]); - ep->next_pid = 1u; - } -} - -static void reset_all_endpoints(void) -{ - memset(hw_endpoints, 0, sizeof(hw_endpoints)); - next_buffer_ptr = &usb_dpram->epx_data[0]; - - // Init Control endpoint out & in - hw_endpoint_init(0x0, 64, TUSB_XFER_CONTROL); - hw_endpoint_init(0x80, 64, TUSB_XFER_CONTROL); -} - -static void dcd_rp2040_irq(void) -{ - uint32_t const status = usb_hw->ints; - uint32_t handled = 0; - - if (status & USB_INTS_SETUP_REQ_BITS) - { - handled |= USB_INTS_SETUP_REQ_BITS; - uint8_t const *setup = (uint8_t const *)&usb_dpram->setup_packet; - // Clear stall bits and reset pid - reset_ep0(); - // Pass setup packet to tiny usb - dcd_event_setup_received(0, setup, true); - usb_hw_clear->sie_status = USB_SIE_STATUS_SETUP_REC_BITS; - } - - if (status & USB_INTS_BUFF_STATUS_BITS) - { - handled |= USB_INTS_BUFF_STATUS_BITS; - hw_handle_buff_status(); - } - -#if FORCE_VBUS_DETECT == 0 - // Since we force VBUS detect On, device will always think it is connected and - // couldn't distinguish between disconnect and suspend - if (status & USB_INTS_DEV_CONN_DIS_BITS) - { - handled |= USB_INTS_DEV_CONN_DIS_BITS; - - if ( usb_hw->sie_status & USB_SIE_STATUS_CONNECTED_BITS ) - { - // Connected: nothing to do - }else - { - // Disconnected - dcd_event_bus_signal(0, DCD_EVENT_UNPLUGGED, true); - } - - usb_hw_clear->sie_status = USB_SIE_STATUS_CONNECTED_BITS; - } -#endif - - // SE0 for 2.5 us or more (will last at least 10ms) - if (status & USB_INTS_BUS_RESET_BITS) - { - pico_trace("BUS RESET\n"); - - handled |= USB_INTS_BUS_RESET_BITS; - - usb_hw->dev_addr_ctrl = 0; - reset_all_endpoints(); - dcd_event_bus_reset(0, TUSB_SPEED_FULL, true); - usb_hw_clear->sie_status = USB_SIE_STATUS_BUS_RESET_BITS; - -#if TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX - // Only run enumeration walk-around if pull up is enabled - if ( usb_hw->sie_ctrl & USB_SIE_CTRL_PULLUP_EN_BITS ) rp2040_usb_device_enumeration_fix(); -#endif - } - - /* Note from pico datasheet 4.1.2.6.4 (v1.2) - * If you enable the suspend interrupt, it is likely you will see a suspend interrupt when - * the device is first connected but the bus is idle. The bus can be idle for a few ms before - * the host begins sending start of frame packets. You will also see a suspend interrupt - * when the device is disconnected if you do not have a VBUS detect circuit connected. This is - * because without VBUS detection, it is impossible to tell the difference between - * being disconnected and suspended. - */ - if (status & USB_INTS_DEV_SUSPEND_BITS) - { - handled |= USB_INTS_DEV_SUSPEND_BITS; - dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true); - usb_hw_clear->sie_status = USB_SIE_STATUS_SUSPENDED_BITS; - } - - if (status & USB_INTS_DEV_RESUME_FROM_HOST_BITS) - { - handled |= USB_INTS_DEV_RESUME_FROM_HOST_BITS; - dcd_event_bus_signal(0, DCD_EVENT_RESUME, true); - usb_hw_clear->sie_status = USB_SIE_STATUS_RESUME_BITS; - } - - if (status ^ handled) - { - panic("Unhandled IRQ 0x%x\n", (uint) (status ^ handled)); - } -} - -#define USB_INTS_ERROR_BITS ( \ - USB_INTS_ERROR_DATA_SEQ_BITS | \ - USB_INTS_ERROR_BIT_STUFF_BITS | \ - USB_INTS_ERROR_CRC_BITS | \ - USB_INTS_ERROR_RX_OVERFLOW_BITS | \ - USB_INTS_ERROR_RX_TIMEOUT_BITS) - -/*------------------------------------------------------------------*/ -/* Controller API - *------------------------------------------------------------------*/ - -void dcd_init (uint8_t rhport) -{ - pico_trace("dcd_init %d\n", rhport); - assert(rhport == 0); - - // Reset hardware to default state - rp2040_usb_init(); - -#if FORCE_VBUS_DETECT - // Force VBUS detect so the device thinks it is plugged into a host - usb_hw->pwr = USB_USB_PWR_VBUS_DETECT_BITS | USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_BITS; -#endif - - irq_set_exclusive_handler(USBCTRL_IRQ, dcd_rp2040_irq); - - // reset endpoints - reset_all_endpoints(); - - // Initializes the USB peripheral for device mode and enables it. - // Don't need to enable the pull up here. Force VBUS - usb_hw->main_ctrl = USB_MAIN_CTRL_CONTROLLER_EN_BITS; - - // Enable individual controller IRQS here. Processor interrupt enable will be used - // for the global interrupt enable... - // Note: Force VBUS detect cause disconnection not detectable - usb_hw->sie_ctrl = USB_SIE_CTRL_EP0_INT_1BUF_BITS; - usb_hw->inte = USB_INTS_BUFF_STATUS_BITS | USB_INTS_BUS_RESET_BITS | USB_INTS_SETUP_REQ_BITS | - USB_INTS_DEV_SUSPEND_BITS | USB_INTS_DEV_RESUME_FROM_HOST_BITS | - (FORCE_VBUS_DETECT ? 0 : USB_INTS_DEV_CONN_DIS_BITS); - - dcd_connect(rhport); -} - -void dcd_int_enable(uint8_t rhport) -{ - assert(rhport == 0); - irq_set_enabled(USBCTRL_IRQ, true); -} - -void dcd_int_disable(uint8_t rhport) -{ - assert(rhport == 0); - irq_set_enabled(USBCTRL_IRQ, false); -} - -void dcd_set_address (uint8_t rhport, uint8_t dev_addr) -{ - pico_trace("dcd_set_address %d %d\n", rhport, dev_addr); - assert(rhport == 0); - - // Can't set device address in hardware until status xfer has complete - // Send 0len complete response on EP0 IN - reset_ep0(); - hw_endpoint_xfer(0x80, NULL, 0); -} - -void dcd_remote_wakeup(uint8_t rhport) -{ - pico_info("dcd_remote_wakeup %d\n", rhport); - assert(rhport == 0); - usb_hw_set->sie_ctrl = USB_SIE_CTRL_RESUME_BITS; -} - -// disconnect by disabling internal pull-up resistor on D+/D- -void dcd_disconnect(uint8_t rhport) -{ - pico_info("dcd_disconnect %d\n", rhport); - assert(rhport == 0); - usb_hw_clear->sie_ctrl = USB_SIE_CTRL_PULLUP_EN_BITS; -} - -// connect by enabling internal pull-up resistor on D+/D- -void dcd_connect(uint8_t rhport) -{ - pico_info("dcd_connect %d\n", rhport); - assert(rhport == 0); - usb_hw_set->sie_ctrl = USB_SIE_CTRL_PULLUP_EN_BITS; -} - -/*------------------------------------------------------------------*/ -/* DCD Endpoint port - *------------------------------------------------------------------*/ - -void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * request) -{ - (void) rhport; - - if ( request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && - request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && - request->bRequest == TUSB_REQ_SET_ADDRESS ) - { - pico_trace("Set HW address %d\n", request->wValue); - usb_hw->dev_addr_ctrl = (uint8_t) request->wValue; - } - - reset_ep0(); -} - -bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) -{ - assert(rhport == 0); - hw_endpoint_init(desc_edpt->bEndpointAddress, desc_edpt->wMaxPacketSize.size, desc_edpt->bmAttributes.xfer); - return true; -} - -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) -{ - assert(rhport == 0); - hw_endpoint_xfer(ep_addr, buffer, total_bytes); - return true; -} - -void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) -{ - pico_trace("dcd_edpt_stall %02x\n", ep_addr); - assert(rhport == 0); - - if ( tu_edpt_number(ep_addr) == 0 ) - { - // A stall on EP0 has to be armed so it can be cleared on the next setup packet - usb_hw_set->ep_stall_arm = (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) ? USB_EP_STALL_ARM_EP0_IN_BITS : USB_EP_STALL_ARM_EP0_OUT_BITS; - } - - struct hw_endpoint *ep = hw_endpoint_get_by_addr(ep_addr); - - // TODO check with double buffered - _hw_endpoint_buffer_control_set_mask32(ep, USB_BUF_CTRL_STALL); -} - -void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) -{ - pico_trace("dcd_edpt_clear_stall %02x\n", ep_addr); - assert(rhport == 0); - - if (tu_edpt_number(ep_addr)) - { - struct hw_endpoint *ep = hw_endpoint_get_by_addr(ep_addr); - - // clear stall also reset toggle to DATA0 - // TODO check with double buffered - _hw_endpoint_buffer_control_clear_mask32(ep, USB_BUF_CTRL_STALL | USB_BUF_CTRL_DATA1_PID); - } -} - -void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) -{ - (void) rhport; - (void) ep_addr; - - // usbd.c says: In progress transfers on this EP may be delivered after this call - pico_trace("dcd_edpt_close %02x\n", ep_addr); -} - -void dcd_int_handler(uint8_t rhport) -{ - (void) rhport; - dcd_rp2040_irq(); -} - -#endif |