remove unused ASF code

6 files changed, 0 insertions, 1313 deletions

diff --git a/watch-library/hal/include/hal_adc_sync.h b/watch-library/hal/include/hal_adc_sync.h
deleted file mode 100644
index 1b66e3df..00000000
--- a/watch-library/hal/include/hal_adc_sync.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/**
- * \file
- *
- * \brief ADC functionality declaration.
- *
- * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _HAL_ADC_SYNC_H_INCLUDED
-#define _HAL_ADC_SYNC_H_INCLUDED
-
-#include <hpl_adc_sync.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \addtogroup doc_driver_hal_adc_sync
- *
- * @{
- */
-
-/**
- * \brief ADC descriptor
- *
- * The ADC descriptor forward declaration.
- */
-struct adc_sync_descriptor;
-
-/**
- * \brief ADC descriptor
- */
-struct adc_sync_descriptor {
-	/** ADC device */
-	struct _adc_sync_device device;
-};
-
-/**
- * \brief Initialize ADC
- *
- * This function initializes the given ADC descriptor.
- * It checks if the given hardware is not initialized and if the given hardware
- * is permitted to be initialized.
- *
- * \param[out] descr An ADC descriptor to initialize
- * \param[in] hw     The pointer to hardware instance
- * \param[in] func   The pointer to a set of functions pointers
- *
- * \return Initialization status.
- */
-int32_t adc_sync_init(struct adc_sync_descriptor *const descr, void *const hw, void *const func);
-
-/**
- * \brief Deinitialize ADC
- *
- * This function deinitializes the given ADC descriptor.
- * It checks if the given hardware is initialized and if the given hardware is
- * permitted to be deinitialized.
- *
- * \param[in] descr An ADC descriptor to deinitialize
- *
- * \return De-initialization status.
- */
-int32_t adc_sync_deinit(struct adc_sync_descriptor *const descr);
-
-/**
- * \brief Enable ADC
- *
- * Use this function to set the ADC peripheral to enabled state.
- *
- * \param[in] descr    Pointer to the ADC descriptor
- * \param[in] channel  Channel number
- *
- * \return Operation status
- *
- */
-int32_t adc_sync_enable_channel(struct adc_sync_descriptor *const descr, const uint8_t channel);
-
-/**
- * \brief Disable ADC
- *
- * Use this function to set the ADC peripheral to disabled state.
- *
- * \param[in] descr   Pointer to the ADC descriptor
- * \param[in] channel Channel number
- *
- * \return Operation status
- *
- */
-int32_t adc_sync_disable_channel(struct adc_sync_descriptor *const descr, const uint8_t channel);
-
-/**
- * \brief Read data from ADC
- *
- * \param[in] descr    The pointer to the ADC descriptor
- * \param[in] channel  Channel number
- * \param[in] buf      A buffer to read data to
- * \param[in] length   The size of a buffer
- *
- * \return The number of bytes read.
- */
-int32_t adc_sync_read_channel(struct adc_sync_descriptor *const descr, const uint8_t channel, uint8_t *const buffer,
-                              const uint16_t length);
-
-/**
- * \brief Set ADC reference source
- *
- * This function sets ADC reference source.
- *
- * \param[in] descr     The pointer to the ADC descriptor
- * \param[in] reference A reference source to set
- *
- * \return Status of the ADC reference source setting.
- */
-int32_t adc_sync_set_reference(struct adc_sync_descriptor *const descr, const adc_reference_t reference);
-
-/**
- * \brief Set ADC resolution
- *
- * This function sets ADC resolution.
- *
- * \param[in] descr      The pointer to the ADC descriptor
- * \param[in] resolution A resolution to set
- *
- * \return Status of the ADC resolution setting.
- */
-int32_t adc_sync_set_resolution(struct adc_sync_descriptor *const descr, const adc_resolution_t resolution);
-
-/**
- * \brief Set ADC input source of a channel
- *
- * This function sets ADC positive and negative input sources.
- *
- * \param[in] descr     The pointer to the ADC descriptor
- * \param[in] pos_input A positive input source to set
- * \param[in] neg_input A negative input source to set
- * \param[in] channel   Channel number
- *
- * \return Status of the ADC channels setting.
- */
-int32_t adc_sync_set_inputs(struct adc_sync_descriptor *const descr, const adc_pos_input_t pos_input,
-                            const adc_neg_input_t neg_input, const uint8_t channel);
-
-/**
- * \brief Set ADC conversion mode
- *
- * This function sets ADC conversion mode.
- *
- * \param[in] descr The pointer to the ADC descriptor
- * \param[in] mode  A conversion mode to set
- *
- * \return Status of the ADC conversion mode setting.
- */
-int32_t adc_sync_set_conversion_mode(struct adc_sync_descriptor *const descr, const enum adc_conversion_mode mode);
-
-/**
- * \brief Set ADC differential mode
- *
- * This function sets ADC differential mode.
- *
- * \param[in] descr   The pointer to the ADC descriptor
- * \param[in] channel Channel number
- * \param[in] mode    A differential mode to set
- *
- * \return Status of the ADC differential mode setting.
- */
-int32_t adc_sync_set_channel_differential_mode(struct adc_sync_descriptor *const descr, const uint8_t channel,
-                                               const enum adc_differential_mode mode);
-
-/**
- * \brief Set ADC channel gain
- *
- * This function sets ADC channel gain.
- *
- * \param[in] descr   The pointer to the ADC descriptor
- * \param[in] channel Channel number
- * \param[in] gain    A gain to set
- *
- * \return Status of the ADC gain setting.
- */
-int32_t adc_sync_set_channel_gain(struct adc_sync_descriptor *const descr, const uint8_t channel,
-                                  const adc_gain_t gain);
-
-/**
- * \brief Set ADC window mode
- *
- * This function sets ADC window mode.
- *
- * \param[in] descr The pointer to the ADC descriptor
- * \param[in] mode  A window mode to set
- *
- * \return Status of the ADC window mode setting.
- */
-int32_t adc_sync_set_window_mode(struct adc_sync_descriptor *const descr, const adc_window_mode_t mode);
-
-/**
- * \brief Set ADC thresholds
- *
- * This function sets ADC positive and negative thresholds.
- *
- * \param[in] descr         The pointer to the ADC descriptor
- * \param[in] low_threshold A lower thresholds to set
- * \param[in] up_threshold  An upper thresholds to set
- *
- * \return Status of the ADC thresholds setting.
- */
-int32_t adc_sync_set_thresholds(struct adc_sync_descriptor *const descr, const adc_threshold_t low_threshold,
-                                const adc_threshold_t up_threshold);
-
-/**
- * \brief Retrieve threshold state
- *
- * This function retrieves ADC threshold state.
- *
- * \param[in] descr  The pointer to the ADC descriptor
- * \param[out] state The threshold state
- *
- * \return The state of ADC thresholds state retrieving.
- */
-int32_t adc_sync_get_threshold_state(const struct adc_sync_descriptor *const descr,
-                                     adc_threshold_status_t *const           state);
-
-/**
- * \brief Check if conversion is complete
- *
- * This function checks if the ADC has finished the conversion.
- *
- * \param[in] descr   The pointer to the ADC descriptor
- * \param[in] channel Channel number
- *
- * \return The status of ADC conversion completion checking.
- * \retval 1 The conversion is complete
- * \retval 0 The conversion is not complete
- */
-int32_t adc_sync_is_channel_conversion_complete(const struct adc_sync_descriptor *const descr, const uint8_t channel);
-
-/**
- * \brief Retrieve the current driver version
- *
- * \return Current driver version.
- */
-uint32_t adc_sync_get_version(void);
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#include <hpl_missing_features.h>
-
-#endif /* _HAL_ADC_SYNC_H_INCLUDED */
diff --git a/watch-library/hal/include/hal_pwm.h b/watch-library/hal/include/hal_pwm.h
deleted file mode 100644
index d55f7e68..00000000
--- a/watch-library/hal/include/hal_pwm.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/**
- * \file
- *
- * \brief PWM functionality declaration.
- *
- * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef HAL_PWM_H_INCLUDED
-#define HAL_PWM_H_INCLUDED
-
-#include <hpl_pwm.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \addtogroup doc_driver_hal_pwm_async
- *
- *@{
- */
-
-/**
- * \brief PWM descriptor
- *
- * The PWM descriptor forward declaration.
- */
-struct pwm_descriptor;
-
-/**
- * \brief PWM callback type
- */
-typedef void (*pwm_cb_t)(const struct pwm_descriptor *const descr);
-
-/**
- * \brief PWM callback types
- */
-enum pwm_callback_type { PWM_PERIOD_CB, PWM_ERROR_CB };
-
-/**
- * \brief PWM callbacks
- */
-struct pwm_callbacks {
-	pwm_cb_t period;
-	pwm_cb_t error;
-};
-
-/** \brief PWM descriptor
- */
-struct pwm_descriptor {
-	/** PWM device */
-	struct _pwm_device device;
-	/** PWM callback structure */
-	struct pwm_callbacks pwm_cb;
-	/** PWM HPL interface pointer */
-	struct _pwm_hpl_interface *func;
-};
-
-/** \brief Initialize the PWM HAL instance and hardware
- *
- *  \param[in] descr Pointer to the HAL PWM descriptor
- *  \param[in] hw The pointer to hardware instance
- *  \param[in] func The pointer to a set of functions pointers
- *
- *  \return Operation status.
- */
-int32_t pwm_init(struct pwm_descriptor *const descr, void *const hw, struct _pwm_hpl_interface *const func);
-
-/** \brief Deinitialize the PWM HAL instance and hardware
- *
- *  \param[in] descr Pointer to the HAL PWM descriptor
- *
- *  \return Operation status.
- */
-int32_t pwm_deinit(struct pwm_descriptor *const descr);
-
-/** \brief PWM output start
- *
- *  \param[in] descr Pointer to the HAL PWM descriptor
- *
- *  \return Operation status.
- */
-int32_t pwm_enable(struct pwm_descriptor *const descr);
-
-/** \brief PWM output stop
- *
- *  \param[in] descr Pointer to the HAL PWM descriptor
- *
- *  \return Operation status.
- */
-int32_t pwm_disable(struct pwm_descriptor *const descr);
-
-/** \brief Register PWM callback
- *
- *  \param[in] descr Pointer to the HAL PWM descriptor
- *  \param[in] type Callback type
- *  \param[in] cb A callback function, passing NULL de-registers callback
- *
- *  \return Operation status.
- *  \retval 0 Success
- *  \retval -1 Error
- */
-int32_t pwm_register_callback(struct pwm_descriptor *const descr, enum pwm_callback_type type, pwm_cb_t cb);
-
-/** \brief Change PWM parameter
- *
- *  \param[in] descr Pointer to the HAL PWM descriptor
- *  \param[in] period Total period of one PWM cycle
- *  \param[in] duty_cycle Period of PWM first half during one cycle
- *
- *  \return Operation status.
- */
-int32_t pwm_set_parameters(struct pwm_descriptor *const descr, const pwm_period_t period,
-                           const pwm_period_t duty_cycle);
-
-/** \brief Get PWM driver version
- *
- *  \return Current driver version.
- */
-uint32_t pwm_get_version(void);
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_PWM;_H_INCLUDED */
diff --git a/watch-library/hal/include/hpl_adc_async.h b/watch-library/hal/include/hpl_adc_async.h
deleted file mode 100644
index 1aa41624..00000000
--- a/watch-library/hal/include/hpl_adc_async.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/**
- * \file
- *
- * \brief ADC related functionality declaration.
- *
- * Copyright (c) 2015-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _HPL_ADC_ASYNC_H_INCLUDED
-#define _HPL_ADC_ASYNC_H_INCLUDED
-
-/**
- * \addtogroup HPL ADC
- *
- * \section hpl_async_adc_rev Revision History
- * - v1.0.0 Initial Release
- *
- *@{
- */
-
-#include "hpl_adc_sync.h"
-#include "hpl_irq.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \brief ADC device structure
- *
- * The ADC device structure forward declaration.
- */
-struct _adc_async_device;
-
-/**
- * \brief ADC callback types
- */
-enum _adc_async_callback_type { ADC_ASYNC_DEVICE_CONVERT_CB, ADC_ASYNC_DEVICE_MONITOR_CB, ADC_ASYNC_DEVICE_ERROR_CB };
-
-/**
- * \brief ADC interrupt callbacks
- */
-struct _adc_async_callbacks {
-	void (*window_cb)(struct _adc_async_device *device, const uint8_t channel);
-	void (*error_cb)(struct _adc_async_device *device, const uint8_t channel);
-};
-
-/**
- * \brief ADC channel interrupt callbacks
- */
-struct _adc_async_ch_callbacks {
-	void (*convert_done)(struct _adc_async_device *device, const uint8_t channel, const uint16_t data);
-};
-
-/**
- * \brief ADC descriptor device structure
- */
-struct _adc_async_device {
-	struct _adc_async_callbacks    adc_async_cb;
-	struct _adc_async_ch_callbacks adc_async_ch_cb;
-	struct _irq_descriptor         irq;
-	void *                         hw;
-};
-
-/**
- * \name HPL functions
- */
-//@{
-/**
- * \brief Initialize synchronous ADC
- *
- * This function does low level ADC configuration.
- *
- * param[in] device The pointer to ADC device instance
- * param[in] hw     The pointer to hardware instance
- *
- * \return Initialization status
- */
-int32_t _adc_async_init(struct _adc_async_device *const device, void *const hw);
-
-/**
- * \brief Deinitialize ADC
- *
- * \param[in] device The pointer to ADC device instance
- */
-void _adc_async_deinit(struct _adc_async_device *const device);
-
-/**
- * \brief Enable ADC peripheral
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- */
-void _adc_async_enable_channel(struct _adc_async_device *const device, const uint8_t channel);
-
-/**
- * \brief Disable ADC peripheral
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- */
-void _adc_async_disable_channel(struct _adc_async_device *const device, const uint8_t channel);
-
-/**
- * \brief Retrieve ADC conversion data size
- *
- * \param[in] device The pointer to ADC device instance
- *
- * \return The data size in bytes
- */
-uint8_t _adc_async_get_data_size(const struct _adc_async_device *const device);
-
-/**
- * \brief Check if conversion is done
- *
- * \param[in] device  The pointer to ADC device instance
- * \param[in] channel Channel number
- *
- * \return The status of conversion
- * \retval true The conversion is done
- * \retval false The conversion is not done
- */
-bool _adc_async_is_channel_conversion_done(const struct _adc_async_device *const device, const uint8_t channel);
-
-/**
- * \brief Make conversion
- *
- * \param[in] device The pointer to ADC device instance
- */
-void _adc_async_convert(struct _adc_async_device *const device);
-
-/**
- * \brief Retrieve the conversion result
- *
- * \param[in] device  The pointer to ADC device instance
- * \param[in] channel Channel number
- *
- * The result value
- */
-uint16_t _adc_async_read_channel_data(const struct _adc_async_device *const device, const uint8_t channel);
-
-/**
- * \brief Set reference source
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] reference A reference source to set
- */
-void _adc_async_set_reference_source(struct _adc_async_device *const device, const adc_reference_t reference);
-
-/**
- * \brief Set resolution
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] resolution A resolution to set
- */
-void _adc_async_set_resolution(struct _adc_async_device *const device, const adc_resolution_t resolution);
-
-/**
- * \brief Set ADC input source of a channel
- *
- * \param[in] device    The pointer to ADC device instance
- * \param[in] pos_input A positive input source to set
- * \param[in] neg_input A negative input source to set
- * \param[in] channel   Channel number
- */
-void _adc_async_set_inputs(struct _adc_async_device *const device, const adc_pos_input_t pos_input,
-                           const adc_neg_input_t neg_input, const uint8_t channel);
-
-/**
- * \brief Set conversion mode
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] mode A conversion mode to set
- */
-void _adc_async_set_conversion_mode(struct _adc_async_device *const device, const enum adc_conversion_mode mode);
-
-/**
- * \brief Set differential mode
- *
- * \param[in] device  The pointer to ADC device instance
- * \param[in] channel Channel number
- * \param[in] mode    A differential mode to set
- */
-void _adc_async_set_channel_differential_mode(struct _adc_async_device *const device, const uint8_t channel,
-                                              const enum adc_differential_mode mode);
-
-/**
- * \brief Set gain
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- * \param[in] gain     A gain to set
- */
-void _adc_async_set_channel_gain(struct _adc_async_device *const device, const uint8_t channel, const adc_gain_t gain);
-
-/**
- * \brief Set window mode
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] mode   A mode to set
- */
-void _adc_async_set_window_mode(struct _adc_async_device *const device, const adc_window_mode_t mode);
-
-/**
- * \brief Set lower threshold
- *
- * \param[in] device        The pointer to ADC device instance
- * \param[in] low_threshold  A lower threshold to set
- * \param[in] up_threshold   An upper thresholds to set
- */
-void _adc_async_set_thresholds(struct _adc_async_device *const device, const adc_threshold_t low_threshold,
-                               const adc_threshold_t up_threshold);
-
-/**
- * \brief Retrieve threshold state
- *
- * \param[in] device The pointer to ADC device instance
- * \param[out] state The threshold state
- */
-void _adc_async_get_threshold_state(const struct _adc_async_device *const device, adc_threshold_status_t *const state);
-
-/**
- * \brief Enable/disable ADC channel interrupt
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- * \param[in] type     The type of interrupt to disable/enable if applicable
- * \param[in] state    Enable or disable
- */
-void _adc_async_set_irq_state(struct _adc_async_device *const device, const uint8_t channel,
-                              const enum _adc_async_callback_type type, const bool state);
-
-//@}
-
-#ifdef __cplusplus
-}
-#endif
-/**@}*/
-#endif /* _HPL_ADC_ASYNC_H_INCLUDED */
diff --git a/watch-library/hal/include/hpl_adc_dma.h b/watch-library/hal/include/hpl_adc_dma.h
deleted file mode 100644
index bb3a0541..00000000
--- a/watch-library/hal/include/hpl_adc_dma.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/**
- * \file
- *
- * \brief ADC related functionality declaration.
- *
- * Copyright (c) 2016-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _HPL_ADC_DMA_H_INCLUDED
-#define _HPL_ADC_DMA_H_INCLUDED
-
-/**
- * \addtogroup HPL ADC
- *
- * \section hpl_dma_adc_rev Revision History
- * - v1.0.0 Initial Release
- *
- *@{
- */
-
-#include <hpl_adc_sync.h>
-#include <hpl_irq.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \brief ADC device structure
- *
- * The ADC device structure forward declaration.
- */
-struct _adc_dma_device;
-
-/**
- * \brief ADC callback types
- */
-enum _adc_dma_callback_type { ADC_DMA_DEVICE_COMPLETE_CB, ADC_DMA_DEVICE_ERROR_CB };
-
-/**
- * \brief ADC interrupt callbacks
- */
-struct _adc_dma_callbacks {
-	void (*complete)(struct _adc_dma_device *device, const uint16_t data);
-	void (*error)(struct _adc_dma_device *device);
-};
-
-/**
- * \brief ADC descriptor device structure
- */
-struct _adc_dma_device {
-	struct _adc_dma_callbacks adc_dma_cb;
-	struct _irq_descriptor    irq;
-	void *                    hw;
-};
-
-/**
- * \name HPL functions
- */
-//@{
-/**
- * \brief Initialize synchronous ADC
- *
- * This function does low level ADC configuration.
- *
- * param[in] device The pointer to ADC device instance
- * param[in] hw The pointer to hardware instance
- *
- * \return Initialization status
- */
-int32_t _adc_dma_init(struct _adc_dma_device *const device, void *const hw);
-
-/**
- * \brief Deinitialize ADC
- *
- * \param[in] device The pointer to ADC device instance
- */
-void _adc_dma_deinit(struct _adc_dma_device *const device);
-
-/**
- * \brief Enable ADC peripheral
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- */
-void _adc_dma_enable_channel(struct _adc_dma_device *const device, const uint8_t channel);
-
-/**
- * \brief Disable ADC peripheral
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- */
-void _adc_dma_disable_channel(struct _adc_dma_device *const device, const uint8_t channel);
-
-/**
- * \brief Return address of ADC DMA source
- *
- * \param[in] device The pointer to ADC device instance
- *
- * \return ADC DMA source address
- */
-uint32_t _adc_get_source_for_dma(struct _adc_dma_device *const device);
-
-/**
- * \brief Retrieve ADC conversion data size
- *
- * \param[in] device The pointer to ADC device instance
- *
- * \return The data size in bytes
- */
-uint8_t _adc_dma_get_data_size(const struct _adc_dma_device *const device);
-
-/**
- * \brief Check if conversion is done
- *
- * \param[in] device   The pointer to ADC device instance
- *
- * \return The status of conversion
- * \retval true The conversion is done
- * \retval false The conversion is not done
- */
-bool _adc_dma_is_conversion_done(const struct _adc_dma_device *const device);
-
-/**
- * \brief Make conversion
- *
- * \param[in] device The pointer to ADC device instance
- */
-void _adc_dma_convert(struct _adc_dma_device *const device);
-
-/**
- * \brief Set reference source
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] reference A reference source to set
- */
-void _adc_dma_set_reference_source(struct _adc_dma_device *const device, const adc_reference_t reference);
-
-/**
- * \brief Set resolution
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] resolution A resolution to set
- */
-void _adc_dma_set_resolution(struct _adc_dma_device *const device, const adc_resolution_t resolution);
-
-/**
- * \brief Set ADC input source of a channel
- *
- * \param[in] device    The pointer to ADC device instance
- * \param[in] pos_input A positive input source to set
- * \param[in] neg_input A negative input source to set
- * \param[in] channel   Channel number
- */
-void _adc_dma_set_inputs(struct _adc_dma_device *const device, const adc_pos_input_t pos_input,
-                         const adc_neg_input_t neg_input, const uint8_t channel);
-
-/**
- * \brief Set conversion mode
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] mode A conversion mode to set
- */
-void _adc_dma_set_conversion_mode(struct _adc_dma_device *const device, const enum adc_conversion_mode mode);
-
-/**
- * \brief Set differential mode
- *
- * \param[in] device  The pointer to ADC device instance
- * \param[in] channel Channel number
- * \param[in] mode    A differential mode to set
- */
-void _adc_dma_set_channel_differential_mode(struct _adc_dma_device *const device, const uint8_t channel,
-                                            const enum adc_differential_mode mode);
-
-/**
- * \brief Set gain
- *
- * \param[in] device  The pointer to ADC device instance
- * \param[in] channel Channel number
- * \param[in] gain    A gain to set
- */
-void _adc_dma_set_channel_gain(struct _adc_dma_device *const device, const uint8_t channel, const adc_gain_t gain);
-
-/**
- * \brief Set window mode
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] mode A mode to set
- */
-void _adc_dma_set_window_mode(struct _adc_dma_device *const device, const adc_window_mode_t mode);
-
-/**
- * \brief Set thresholds
- *
- * \param[in] device        The pointer to ADC device instance
- * \param[in] low_threshold A lower thresholds to set
- * \param[in] up_threshold  An upper thresholds to set
- */
-void _adc_dma_set_thresholds(struct _adc_dma_device *const device, const adc_threshold_t low_threshold,
-                             const adc_threshold_t up_threshold);
-
-/**
- * \brief Retrieve threshold state
- *
- * \param[in] device The pointer to ADC device instance
- * \param[out] state The threshold state
- */
-void _adc_dma_get_threshold_state(const struct _adc_dma_device *const device, adc_threshold_status_t *const state);
-
-//@}
-
-#ifdef __cplusplus
-}
-#endif
-/**@}*/
-#endif /* _HPL_ADC_DMA_H_INCLUDED */
diff --git a/watch-library/hal/include/hpl_adc_sync.h b/watch-library/hal/include/hpl_adc_sync.h
deleted file mode 100644
index 3bfbc61d..00000000
--- a/watch-library/hal/include/hpl_adc_sync.h
+++ /dev/null
@@ -1,271 +0,0 @@
-/**
- * \file
- *
- * \brief ADC related functionality declaration.
- *
- * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _HPL_ADC_SYNC_H_INCLUDED
-#define _HPL_ADC_SYNC_H_INCLUDED
-
-/**
- * \addtogroup HPL ADC
- *
- * \section hpl_adc_sync_rev Revision History
- * - v1.0.0 Initial Release
- *
- *@{
- */
-
-#include "compiler.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \brief ADC reference source
- */
-typedef uint8_t adc_reference_t;
-
-/**
- * \brief ADC resolution
- */
-typedef uint8_t adc_resolution_t;
-
-/**
- * \brief ADC positive input for channel
- */
-typedef uint8_t adc_pos_input_t;
-
-/**
- * \brief ADC negative input for channel
- */
-typedef uint8_t adc_neg_input_t;
-
-/**
- * \brief ADC threshold
- */
-typedef uint16_t adc_threshold_t;
-
-/**
- * \brief ADC gain
- */
-typedef uint8_t adc_gain_t;
-
-/**
- * \brief ADC conversion mode
- */
-enum adc_conversion_mode { ADC_CONVERSION_MODE_SINGLE_CONVERSION = 0, ADC_CONVERSION_MODE_FREERUN };
-
-/**
- * \brief ADC differential mode
- */
-enum adc_differential_mode { ADC_DIFFERENTIAL_MODE_SINGLE_ENDED = 0, ADC_DIFFERENTIAL_MODE_DIFFERENTIAL };
-
-/**
- * \brief ADC window mode
- */
-typedef uint8_t adc_window_mode_t;
-
-/**
- * \brief ADC threshold status
- */
-typedef bool adc_threshold_status_t;
-
-/**
- * \brief ADC sync descriptor device structure
- */
-struct _adc_sync_device {
-	void *hw;
-};
-
-/**
- * \name HPL functions
- */
-//@{
-/**
- * \brief Initialize synchronous ADC
- *
- * This function does low level ADC configuration.
- *
- * param[in] device The pointer to ADC device instance
- * param[in] hw     The pointer to hardware instance
- *
- * \return Initialization status
- */
-int32_t _adc_sync_init(struct _adc_sync_device *const device, void *const hw);
-
-/**
- * \brief Deinitialize ADC
- *
- * \param[in] device The pointer to ADC device instance
- */
-void _adc_sync_deinit(struct _adc_sync_device *const device);
-
-/**
- * \brief Enable ADC
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- */
-void _adc_sync_enable_channel(struct _adc_sync_device *const device, const uint8_t channel);
-
-/**
- * \brief Disable ADC
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- */
-void _adc_sync_disable_channel(struct _adc_sync_device *const device, const uint8_t channel);
-
-/**
- * \brief Retrieve ADC conversion data size
- *
- * \param[in] device The pointer to ADC device instance
- *
- * \return The data size in bytes
- */
-uint8_t _adc_sync_get_data_size(const struct _adc_sync_device *const device);
-
-/**
- * \brief Check if conversion is done
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- *
- * \return The status of conversion
- * \retval true The conversion is done
- * \retval false The conversion is not done
- */
-bool _adc_sync_is_channel_conversion_done(const struct _adc_sync_device *const device, const uint8_t channel);
-
-/**
- * \brief Make conversion
- *
- * \param[in] device The pointer to ADC device instance
- */
-void _adc_sync_convert(struct _adc_sync_device *const device);
-
-/**
- * \brief Retrieve the conversion result
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- *
- * \return The result value of channel
- */
-uint16_t _adc_sync_read_channel_data(const struct _adc_sync_device *const device, const uint8_t channel);
-
-/**
- * \brief Set reference source
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] reference A reference source to set
- */
-void _adc_sync_set_reference_source(struct _adc_sync_device *const device, const adc_reference_t reference);
-
-/**
- * \brief Set resolution
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] resolution A resolution to set
- */
-void _adc_sync_set_resolution(struct _adc_sync_device *const device, const adc_resolution_t resolution);
-
-/**
- * \brief Set ADC input source of a channel
- *
- * \param[in] device    The pointer to ADC device instance
- * \param[in] pos_input A positive input source to set
- * \param[in] neg_input A negative input source to set
- * \param[in] channel   Channel number
- */
-void _adc_sync_set_inputs(struct _adc_sync_device *const device, const adc_pos_input_t pos_input,
-                          const adc_neg_input_t neg_input, const uint8_t channel);
-
-/**
- * \brief Set conversion mode
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] mode A conversion mode to set
- */
-void _adc_sync_set_conversion_mode(struct _adc_sync_device *const device, const enum adc_conversion_mode mode);
-
-/**
- * \brief Set differential mode
- *
- * \param[in] device  The pointer to ADC device instance
- * \param[in] channel Channel number
- * \param[in] mode    A differential mode to set
- */
-void _adc_sync_set_channel_differential_mode(struct _adc_sync_device *const device, const uint8_t channel,
-                                             const enum adc_differential_mode mode);
-
-/**
- * \brief Set gain
- *
- * \param[in] device   The pointer to ADC device instance
- * \param[in] channel  Channel number
- * \param[in] gain     A gain to set
- */
-void _adc_sync_set_channel_gain(struct _adc_sync_device *const device, const uint8_t channel, const adc_gain_t gain);
-
-/**
- * \brief Set window mode
- *
- * \param[in] device The pointer to ADC device instance
- * \param[in] mode   A mode to set
- */
-void _adc_sync_set_window_mode(struct _adc_sync_device *const device, const adc_window_mode_t mode);
-
-/**
- * \brief Set threshold
- *
- * \param[in] device        The pointer to ADC device instance
- * \param[in] low_threshold  A lower threshold to set
- * \param[in] up_threshold   An upper thresholds to set
- */
-void _adc_sync_set_thresholds(struct _adc_sync_device *const device, const adc_threshold_t low_threshold,
-                              const adc_threshold_t up_threshold);
-
-/**
- * \brief Retrieve threshold state
- *
- * \param[in] device The pointer to ADC device instance
- * \param[out] state The threshold state
- */
-void _adc_sync_get_threshold_state(const struct _adc_sync_device *const device, adc_threshold_status_t *const state);
-//@}
-
-#ifdef __cplusplus
-}
-#endif
-/**@}*/
-#endif /* _HPL_ADC_SYNC_H_INCLUDED */
diff --git a/watch-library/hal/include/hpl_pwm.h b/watch-library/hal/include/hpl_pwm.h
deleted file mode 100644
index ea056dea..00000000
--- a/watch-library/hal/include/hpl_pwm.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/**
- * \file
- *
- * \brief PWM related functionality declaration.
- *
- * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- *
- */
-#ifndef _HPL_PWM_H_INCLUDED
-#define _HPL_PWM_H_INCLUDED
-
-/**
- * \addtogroup HPL PWM
- *
- * \section hpl_pwm_rev Revision History
- * - v1.0.0 Initial Release
- *
- *@{
- */
-
-#include <compiler.h>
-#include "hpl_irq.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \brief PWM callback types
- */
-enum _pwm_callback_type { PWM_DEVICE_PERIOD_CB, PWM_DEVICE_ERROR_CB };
-
-/**
- * \brief PWM pulse-width period
- */
-typedef uint32_t pwm_period_t;
-
-/**
- * \brief PWM device structure
- *
- * The PWM device structure forward declaration.
- */
-struct _pwm_device;
-
-/**
- * \brief PWM interrupt callbacks
- */
-struct _pwm_callback {
-	void (*pwm_period_cb)(struct _pwm_device *device);
-	void (*pwm_error_cb)(struct _pwm_device *device);
-};
-
-/**
- * \brief PWM descriptor device structure
- */
-struct _pwm_device {
-	struct _pwm_callback   callback;
-	struct _irq_descriptor irq;
-	void *                 hw;
-};
-
-/**
- * \brief PWM functions, pointers to low-level functions
- */
-struct _pwm_hpl_interface {
-	int32_t (*init)(struct _pwm_device *const device, void *const hw);
-	void (*deinit)(struct _pwm_device *const device);
-	void (*start_pwm)(struct _pwm_device *const device);
-	void (*stop_pwm)(struct _pwm_device *const device);
-	void (*set_pwm_param)(struct _pwm_device *const device, const pwm_period_t period, const pwm_period_t duty_cycle);
-	bool (*is_pwm_enabled)(const struct _pwm_device *const device);
-	pwm_period_t (*pwm_get_period)(const struct _pwm_device *const device);
-	uint32_t (*pwm_get_duty)(const struct _pwm_device *const device);
-	void (*set_irq_state)(struct _pwm_device *const device, const enum _pwm_callback_type type, const bool disable);
-};
-
-#ifdef __cplusplus
-}
-#endif
-/**@}*/
-#endif /* _HPL_PWM_H_INCLUDED */