Sensor Watch Simulator (#35)

* Put something on screen

* Use the 32bit watch_date_time repr to pass from JS

* Implement periodic callbacks

* Clear display on enabling

* Hook up watch_set_led_color() to SVG (green-only)

* Make debug output full-width

* Remove default Emscripten canvas

* Implement sleep and button clicks

* Fix time zone conversion bug in beats-time app

* Clean up warnings

* Fix pin levels

* Set time zone to browser value (if available)

* Add basic backup data saving

* Silence format specifier warnings in both targets

* Remove unnecessary, copied files

* Use RTC pointer to clear callbacks (if available)

* Use preprocessor define to avoid hardcoding MOVEMENT_NUM_FACES

* Change each face to const preprocessor definition

* Remove Intl.DateTimeFormat usage

* Update shell.html title, header

* Add touch start/end event handlers on SVG buttons

* Update shell.html

* Update folder structure (shared, simulator, hardware under watch-library)

* Tease out shared components from watch_slcd

* Clean up simulator watch_slcd.c inline JS calls

* Fix missing newlines at end of file

* Add simulator warnings (except format, unused-paremter)

* Implement remaining watch_rtc functions

* Fix button bug on mouse down then drag out

* Implement remaining watch_slcd functions

* Link keyboard events to buttons (for keys A, L, M)

* Rewrite event handling (mouse, touch, keyboard) in C

* Set explicit text UTF-8 charset in shell.html

* Address PR comments

* Remove unused directories from include paths

1 files changed, 318 insertions, 0 deletions

diff --git a/watch-library/shared/config/hpl_rtc_config.h b/watch-library/shared/config/hpl_rtc_config.h
new file mode 100644
index 00000000..9085ca37
--- /dev/null
+++ b/watch-library/shared/config/hpl_rtc_config.h
@@ -0,0 +1,318 @@
+/* Auto-generated config file hpl_rtc_config.h */
+#ifndef HPL_RTC_CONFIG_H
+#define HPL_RTC_CONFIG_H
+
+// <<< Use Configuration Wizard in Context Menu >>>
+
+// <h> Basic settings
+
+#ifndef CONF_RTC_ENABLE
+#define CONF_RTC_ENABLE 1
+#endif
+
+// <q> Force reset RTC on initialization
+// <i> Force RTC to reset on initialization.
+// <i> Note that the previous power down data in RTC is lost if it's enabled.
+// <id> rtc_arch_init_reset
+#ifndef CONF_RTC_INIT_RESET
+#define CONF_RTC_INIT_RESET 0
+#endif
+
+// <o> Prescaler configuration
+// <0x0=>OFF(Peripheral clock divided by 1)
+// <0x1=>Peripheral clock divided by 1
+// <0x2=>Peripheral clock divided by 2
+// <0x3=>Peripheral clock divided by 4
+// <0x4=>Peripheral clock divided by 8
+// <0x5=>Peripheral clock divided by 16
+// <0x6=>Peripheral clock divided by 32
+// <0x7=>Peripheral clock divided by 64
+// <0x8=>Peripheral clock divided by 128
+// <0x9=>Peripheral clock divided by 256
+// <0xA=>Peripheral clock divided by 512
+// <0xB=>Peripheral clock divided by 1024
+// <i> These bits define the RTC clock relative to the peripheral clock
+// <id> rtc_arch_prescaler
+#ifndef CONF_RTC_PRESCALER
+
+#define CONF_RTC_PRESCALER 0xb
+
+#endif
+
+#ifndef CONF_RTC_COMP_VAL
+
+#define CONF_RTC_COMP_VAL 0
+
+#endif
+
+// <e> RTC Tamper Input 0 settings
+// <id> tamper_input_0_settings
+#ifndef CONF_TAMPER_INPUT_0_SETTINGS
+#define CONF_TAMPER_INPUT_0_SETTINGS 0
+#endif
+
+// <q> Tamper Level Settings
+// <i> Indicates Tamper input 0 level
+// <id> tamper_level_0
+#ifndef CONF_RTC_TAMP_LVL_0
+#define CONF_RTC_TAMP_LVL_0 0
+#endif
+
+// <o> RTC Tamper Input Action
+// <0x0=>OFF(Disabled)
+// <0x1=>Wake and Set Tamper Flag
+// <0x2=>Capture Timestamp and Set Tamper Flag
+// <0x3=>Active Layer Mode.IN and OUT pin is used.Timestamp is also captured.
+// <i> These bits define the RTC Tamper Input Action to be performed
+// <id> rtc_tamper_input_action_0
+#ifndef CONF_RTC_TAMPER_INACT_0
+#define CONF_RTC_TAMPER_INACT_0 0
+#endif
+
+// <q> Debounce Enable for Tamper Input
+// <i> Indicates Debounce should be enabled for Tamper input 0
+// <id> tamper_debounce_enable_0
+#ifndef CONF_RTC_TAMP_DEBNC_0
+#define CONF_RTC_TAMP_DEBNC_0 0
+#endif
+
+// </e>
+
+// <e> RTC Tamper Input 1 settings
+// <id> tamper_input_1_settings
+#ifndef CONF_TAMPER_INPUT_1_SETTINGS
+#define CONF_TAMPER_INPUT_1_SETTINGS 0
+#endif
+
+// <q> Tamper Level Settings
+// <i> Indicates Tamper input 1 level
+// <id> tamper_level_1
+#ifndef CONF_RTC_TAMP_LVL_1
+#define CONF_RTC_TAMP_LVL_1 0
+#endif
+
+// <o> RTC Tamper Input Action
+// <0x0=>OFF(Disabled)
+// <0x1=>Wake and Set Tamper Flag
+// <0x2=>Capture Timestamp and Set Tamper Flag
+// <0x3=>Active Layer Mode.IN and OUT pin is used.Timestamp is also captured.
+// <i> These bits define the RTC Tamper Input Action to be performed
+// <id> rtc_tamper_input_action_1
+#ifndef CONF_RTC_TAMPER_INACT_1
+#define CONF_RTC_TAMPER_INACT_1 0
+#endif
+
+// <q> Debounce Enable for Tamper Input
+// <i> Indicates Debounce should be enabled for Tamper input 1
+// <id> tamper_debounce_enable_1
+#ifndef CONF_RTC_TAMP_DEBNC_1
+#define CONF_RTC_TAMP_DEBNC_1 0
+#endif
+
+// </e>
+
+// <e> RTC Tamper Input 2 settings
+// <id> tamper_input_2_settings
+#ifndef CONF_TAMPER_INPUT_2_SETTINGS
+#define CONF_TAMPER_INPUT_2_SETTINGS 0
+#endif
+
+// <q> Tamper Level Settings
+// <i> Indicates Tamper input 2 level
+// <id> tamper_level_2
+#ifndef CONF_RTC_TAMP_LVL_2
+#define CONF_RTC_TAMP_LVL_2 0
+#endif
+
+// <o> RTC Tamper Input Action
+// <0x0=>OFF(Disabled)
+// <0x1=>Wake and Set Tamper Flag
+// <0x2=>Capture Timestamp and Set Tamper Flag
+// <0x3=>Active Layer Mode.IN and OUT pin is used.Timestamp is also captured.
+// <i> These bits define the RTC Tamper Input Action to be performed
+// <id> rtc_tamper_input_action_2
+#ifndef CONF_RTC_TAMPER_INACT_2
+#define CONF_RTC_TAMPER_INACT_2 0
+#endif
+
+// <q> Debounce Enable for Tamper Input
+// <i> Indicates Debounce should be enabled for Tamper input 2
+// <id> tamper_debounce_enable_2
+#ifndef CONF_RTC_TAMP_DEBNC_2
+#define CONF_RTC_TAMP_DEBNC_2 0
+#endif
+
+// </e>
+
+// <e> RTC Tamper Input 3 settings
+// <id> tamper_input_3_settings
+#ifndef CONF_TAMPER_INPUT_3_SETTINGS
+#define CONF_TAMPER_INPUT_3_SETTINGS 0
+#endif
+
+// <q> Tamper Level Settings
+// <i> Indicates Tamper input 3 level
+// <id> tamper_level_3
+#ifndef CONF_RTC_TAMP_LVL_3
+#define CONF_RTC_TAMP_LVL_3 0
+#endif
+
+// <o> RTC Tamper Input Action
+// <0x0=>OFF(Disabled)
+// <0x1=>Wake and Set Tamper Flag
+// <0x2=>Capture Timestamp and Set Tamper Flag
+// <0x3=>Active Layer Mode.IN and OUT pin is used.Timestamp is also captured.
+// <i> These bits define the RTC Tamper Input Action to be performed
+// <id> rtc_tamper_input_action_3
+#ifndef CONF_RTC_TAMPER_INACT_3
+#define CONF_RTC_TAMPER_INACT_3 0
+#endif
+
+// <q> Debounce Enable for Tamper Input
+// <i> Indicates Debounce should be enabled for Tamper input 3
+// <id> tamper_debounce_enable_3
+#ifndef CONF_RTC_TAMP_DEBNC_3
+#define CONF_RTC_TAMP_DEBNC_3 0
+#endif
+
+// </e>
+
+// <e> RTC Tamper Input 4 settings
+// <id> tamper_input_4_settings
+#ifndef CONF_TAMPER_INPUT_4_SETTINGS
+#define CONF_TAMPER_INPUT_4_SETTINGS 0
+#endif
+
+// <q> Tamper Level Settings
+// <i> Indicates Tamper input 4 level
+// <id> tamper_level_4
+#ifndef CONF_RTC_TAMP_LVL_4
+#define CONF_RTC_TAMP_LVL_4 0
+#endif
+
+// <o> RTC Tamper Input Action
+// <0x0=>OFF(Disabled)
+// <0x1=>Wake and Set Tamper Flag
+// <0x2=>Capture Timestamp and Set Tamper Flag
+// <0x3=>Active Layer Mode.IN and OUT pin is used.Timestamp is also captured.
+// <i> These bits define the RTC Tamper Input Action to be performed
+// <id> rtc_tamper_input_action_4
+#ifndef CONF_RTC_TAMPER_INACT_4
+#define CONF_RTC_TAMPER_INACT_4 0
+#endif
+
+// <q> Debounce Enable for Tamper Input
+// <i> Indicates Debounce should be enabled for Tamper input 4
+// <id> tamper_debounce_enable_4
+#ifndef CONF_RTC_TAMP_DEBNC_4
+#define CONF_RTC_TAMP_DEBNC_4 0
+#endif
+
+// </e>
+
+// <o> RTC Tamper Active Layer Frequency Prescalar
+// <0x0=>DIV2 CLK_RTC_OUT is CLK_RTC /2
+// <0x1=>DIV4 CLK_RTC_OUT is CLK_RTC /4
+// <0x2=>DIV8 CLK_RTC_OUT is CLK_RTC /8
+// <0x3=>DIV16 CLK_RTC_OUT is CLK_RTC /16
+// <0x4=>DIV32 CLK_RTC_OUT is CLK_RTC /32
+// <0x5=>DIV64 CLK_RTC_OUT is CLK_RTC /64
+// <0x6=>DIV128 CLK_RTC_OUT is CLK_RTC /128
+// <0x7=>DIV256 CLK_RTC_OUT is CLK_RTC /256
+// <i> These bits define the RTC Tamper Active Layer Frequecny Prescalar
+// <id> rtc_tamper_active_layer_frequency_prescalar
+#ifndef CONF_RTC_TAMP_ACT_LAYER_FREQ_PRES
+#define CONF_RTC_TAMP_ACT_LAYER_FREQ_PRES 0
+#endif
+
+// <o> RTC Tamper Debounce Frequency Prescalar
+// <0x0=>DIV2 CLK_RTC_DEB is CLK_RTC /2
+// <0x1=>DIV4 CLK_RTC_DEB is CLK_RTC /4
+// <0x2=>DIV8 CLK_RTC_DEB is CLK_RTC /8
+// <0x3=>DIV16 CLK_RTC_DEB is CLK_RTC /16
+// <0x4=>DIV32 CLK_RTC_DEB is CLK_RTC /32
+// <0x5=>DIV64 CLK_RTC_DEB is CLK_RTC /64
+// <0x6=>DIV128 CLK_RTC_DEB is CLK_RTC /128
+// <0x7=>DIV256 CLK_RTC_DEB is CLK_RTC /256
+// <i> These bits define the RTC Debounce Frequency Prescalar
+// <id> rtc_tamper_debounce_frequency_prescalar
+#ifndef CONF_RTC_TAMP_DEBF_PRES
+#define CONF_RTC_TAMP_DEBF_PRES 0
+#endif
+
+// <e> Event control
+// <id> rtc_event_control
+#ifndef CONF_RTC_EVENT_CONTROL_ENABLE
+#define CONF_RTC_EVENT_CONTROL_ENABLE 0
+#endif
+
+// <q> Periodic Interval 0 Event Output
+// <i> This bit indicates whether Periodic interval 0 event is enabled and will be generated
+// <id> rtc_pereo0
+#ifndef CONF_RTC_PEREO0
+#define CONF_RTC_PEREO0 0
+#endif
+// <q> Periodic Interval 1 Event Output
+// <i> This bit indicates whether Periodic interval 1 event is enabled and will be generated
+// <id> rtc_pereo1
+#ifndef CONF_RTC_PEREO1
+#define CONF_RTC_PEREO1 0
+#endif
+// <q> Periodic Interval 2 Event Output
+// <i> This bit indicates whether Periodic interval 2 event is enabled and will be generated
+// <id> rtc_pereo2
+#ifndef CONF_RTC_PEREO2
+#define CONF_RTC_PEREO2 0
+#endif
+// <q> Periodic Interval 3 Event Output
+// <i> This bit indicates whether Periodic interval 3 event is enabled and will be generated
+// <id> rtc_pereo3
+#ifndef CONF_RTC_PEREO3
+#define CONF_RTC_PEREO3 0
+#endif
+// <q> Periodic Interval 4 Event Output
+// <i> This bit indicates whether Periodic interval 4 event is enabled and will be generated
+// <id> rtc_pereo4
+#ifndef CONF_RTC_PEREO4
+#define CONF_RTC_PEREO4 0
+#endif
+// <q> Periodic Interval 5 Event Output
+// <i> This bit indicates whether Periodic interval 5 event is enabled and will be generated
+// <id> rtc_pereo5
+#ifndef CONF_RTC_PEREO5
+#define CONF_RTC_PEREO5 0
+#endif
+// <q> Periodic Interval 6 Event Output
+// <i> This bit indicates whether Periodic interval 6 event is enabled and will be generated
+// <id> rtc_pereo6
+#ifndef CONF_RTC_PEREO6
+#define CONF_RTC_PEREO6 0
+#endif
+// <q> Periodic Interval 7 Event Output
+// <i> This bit indicates whether Periodic interval 7 event is enabled and will be generated
+// <id> rtc_pereo7
+#ifndef CONF_RTC_PEREO7
+#define CONF_RTC_PEREO7 0
+#endif
+
+// <q> Compare 0 Event Output
+// <i> This bit indicates whether Compare O event is enabled and will be generated
+// <id> rtc_cmpeo0
+#ifndef CONF_RTC_COMPE0
+#define CONF_RTC_COMPE0 0
+#endif
+
+// <q> Overflow Event Output
+// <i> This bit indicates whether Overflow event is enabled and will be generated
+// <id> rtc_ovfeo
+#ifndef CONF_RTC_OVFEO
+#define CONF_RTC_OVFEO 0
+#endif
+
+// </e>
+
+// </h>
+
+// <<< end of configuration section >>>
+
+#endif // HPL_RTC_CONFIG_H