summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--watch-library/config/hpl_tc_config.h206
-rw-r--r--watch-library/config/hpl_tcc_config.h547
2 files changed, 0 insertions, 753 deletions
diff --git a/watch-library/config/hpl_tc_config.h b/watch-library/config/hpl_tc_config.h
deleted file mode 100644
index 61e5b1b6..00000000
--- a/watch-library/config/hpl_tc_config.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/* Auto-generated config file hpl_tc_config.h */
-#ifndef HPL_TC_CONFIG_H
-#define HPL_TC_CONFIG_H
-
-// <<< Use Configuration Wizard in Context Menu >>>
-
-#include <peripheral_clk_config.h>
-
-#ifndef CONF_TC3_ENABLE
-#define CONF_TC3_ENABLE 1
-#endif
-
-// <h> Basic settings
-// <o> Prescaler
-// <0=> No division
-// <1=> Divide by 2
-// <2=> Divide by 4
-// <3=> Divide by 8
-// <4=> Divide by 16
-// <5=> Divide by 64
-// <6=> Divide by 256
-// <7=> Divide by 1024
-// <i> This defines the prescaler value
-// <id> tc_prescaler
-#ifndef CONF_TC3_PRESCALER
-#define CONF_TC3_PRESCALER 0
-#endif
-// </h>
-
-// <h> PWM Waveform Output settings
-// <o> Waveform Period Value (uS) <0x00-0xFFFFFFFF>
-// <i> The unit of this value is us.
-// <id> tc_arch_wave_per_val
-#ifndef CONF_TC3_WAVE_PER_VAL
-#define CONF_TC3_WAVE_PER_VAL 0x3e8
-#endif
-
-// <o> Waveform Duty Value (0.1%) <0x00-0x03E8>
-// <i> The unit of this value is 1/1000.
-// <id> tc_arch_wave_duty_val
-#ifndef CONF_TC3_WAVE_DUTY_VAL
-#define CONF_TC3_WAVE_DUTY_VAL 0x1f4
-#endif
-
-/* Caculate pwm ccx register value based on WAVE_PER_VAL and Waveform Duty Value */
-#if CONF_TC3_PRESCALER < TC_CTRLA_PRESCALER_DIV64_Val
-#define CONF_TC3_CC0 \
- ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 1000000 / (1 << CONF_TC3_PRESCALER) - 1))
-#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000)
-
-#elif CONF_TC3_PRESCALER == TC_CTRLA_PRESCALER_DIV64_Val
-#define CONF_TC3_CC0 ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 64000000 - 1))
-#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000)
-
-#elif CONF_TC3_PRESCALER == TC_CTRLA_PRESCALER_DIV256_Val
-#define CONF_TC3_CC0 ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 256000000 - 1))
-#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000)
-
-#elif CONF_TC3_PRESCALER == TC_CTRLA_PRESCALER_DIV1024_Val
-#define CONF_TC3_CC0 ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 1024000000 - 1))
-#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000)
-#endif
-
-// </h>
-
-// <h> Advanced settings
-// <y> Mode
-// <TC_CTRLA_MODE_COUNT16_Val"> Counter in 16-bit mode
-// <TC_CTRLA_MODE_COUNT32_Val"> Counter in 32-bit mode
-// <i> These bits mode
-// <id> tc_mode
-#ifndef CONF_TC3_MODE
-#define CONF_TC3_MODE TC_CTRLA_MODE_COUNT16_Val
-#endif
-
-/* Unused in 16/32 bit PWM mode */
-#ifndef CONF_TC3_PER
-#define CONF_TC3_PER 0x32
-#endif
-
-// <y> Prescaler and Counter Synchronization Selection
-// <TC_CTRLA_PRESCSYNC_GCLK_Val"> Reload or reset counter on next GCLK
-// <TC_CTRLA_PRESCSYNC_PRESC_Val"> Reload or reset counter on next prescaler clock
-// <TC_CTRLA_PRESCSYNC_RESYNC_Val"> Reload or reset counter on next GCLK and reset prescaler counter
-// <i> These bits select if on retrigger event, the Counter should be cleared or reloaded on the next GCLK_TCx clock or on the next prescaled GCLK_TCx clock.
-// <id> tc_arch_presync
-#ifndef CONF_TC3_PRESCSYNC
-#define CONF_TC3_PRESCSYNC TC_CTRLA_PRESCSYNC_GCLK_Val
-#endif
-
-// <q> Run in standby
-// <i> Indicates whether the will continue running in standby sleep mode or not
-// <id> tc_arch_runstdby
-#ifndef CONF_TC3_RUNSTDBY
-#define CONF_TC3_RUNSTDBY 0
-#endif
-
-// <q> On-Demand
-// <i> Indicates whether the TC3's on-demand mode is on or not
-// <id> tc_arch_ondemand
-#ifndef CONF_TC3_ONDEMAND
-#define CONF_TC3_ONDEMAND 0
-#endif
-
-// <o> Auto Lock
-// <0x0=>The Lock Update bit is not affected on overflow/underflow and re-trigger event
-// <0x1=>The Lock Update bit is set on each overflow/underflow or re-trigger event
-// <id> tc_arch_alock
-#ifndef CONF_TC3_ALOCK
-#define CONF_TC3_ALOCK 0
-#endif
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_CAPTEN0 0
-//#define CONF_TC3_CAPTEN1 0
-//#define CONF_TC3_COPEN0 0
-//#define CONF_TC3_COPEN1 0
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_DIR 0
-//#define CONF_TC3_ONESHOT 0
-//#define CONF_TC3_LUPD 0
-
-// <q> Debug Running Mode
-// <i> Indicates whether the Debug Running Mode is enabled or not
-// <id> tc_arch_dbgrun
-#ifndef CONF_TC3_DBGRUN
-#define CONF_TC3_DBGRUN 0
-#endif
-
-// <e> Event control
-// <id> timer_event_control
-#ifndef CONF_TC3_EVENT_CONTROL_ENABLE
-#define CONF_TC3_EVENT_CONTROL_ENABLE 0
-#endif
-
-// <q> Output Event On Match or Capture on Channel 0
-// <i> Enable output of event on timer tick
-// <id> tc_arch_mceo0
-#ifndef CONF_TC3_MCEO0
-#define CONF_TC3_MCEO0 0
-#endif
-
-// <q> Output Event On Match or Capture on Channel 1
-// <i> Enable output of event on timer tick
-// <id> tc_arch_mceo1
-#ifndef CONF_TC3_MCEO1
-#define CONF_TC3_MCEO1 0
-#endif
-
-// <q> Output Event On Timer Tick
-// <i> Enable output of event on timer tick
-// <id> tc_arch_ovfeo
-#ifndef CONF_TC3_OVFEO
-#define CONF_TC3_OVFEO 0
-#endif
-
-// <q> Event Input
-// <i> Enable asynchronous input events
-// <id> tc_arch_tcei
-#ifndef CONF_TC3_TCEI
-#define CONF_TC3_TCEI 0
-#endif
-
-// <q> Inverted Event Input
-// <i> Invert the asynchronous input events
-// <id> tc_arch_tcinv
-#ifndef CONF_TC3_TCINV
-#define CONF_TC3_TCINV 0
-#endif
-
-// <o> Event action
-// <0=> Event action disabled
-// <1=> Start, restart or re-trigger TC on event
-// <2=> Count on event
-// <3=> Start on event
-// <4=> Time stamp capture
-// <5=> Period captured in CC0, pulse width in CC1
-// <6=> Period captured in CC1, pulse width in CC0
-// <7=> Pulse width capture
-// <i> Event which will be performed on an event
-//<id> tc_arch_evact
-#ifndef CONF_TC3_EVACT
-#define CONF_TC3_EVACT 0
-#endif
-// </e>
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_WAVEGEN TC_CTRLA_WAVEGEN_MFRQ_Val
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_INVEN0 0
-//#define CONF_TC3_INVEN1 0
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_PERBUF 0
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_CCBUF0 0
-//#define CONF_TC3_CCBUF1 0
-
-// </h>
-
-// <<< end of configuration section >>>
-
-#endif // HPL_TC_CONFIG_H
diff --git a/watch-library/config/hpl_tcc_config.h b/watch-library/config/hpl_tcc_config.h
deleted file mode 100644
index a8d45f5d..00000000
--- a/watch-library/config/hpl_tcc_config.h
+++ /dev/null
@@ -1,547 +0,0 @@
-/* Auto-generated config file hpl_tcc_config.h */
-#ifndef HPL_TCC_CONFIG_H
-#define HPL_TCC_CONFIG_H
-
-// <<< Use Configuration Wizard in Context Menu >>>
-
-#include <peripheral_clk_config.h>
-#ifndef CONF_TCC0_ENABLE
-#define CONF_TCC0_ENABLE 1
-#endif
-
-#ifndef CONF_TCC0_PWM_ENABLE
-#define CONF_TCC0_PWM_ENABLE 1
-#endif
-
-// <h> Basic settings
-// <y> TCC0 Prescaler
-// <TCC_CTRLA_PRESCALER_DIV1_Val"> No division
-// <TCC_CTRLA_PRESCALER_DIV2_Val"> Divide by 2
-// <TCC_CTRLA_PRESCALER_DIV4_Val"> Divide by 4
-// <TCC_CTRLA_PRESCALER_DIV8_Val"> Divide by 8
-// <TCC_CTRLA_PRESCALER_DIV16_Val"> Divide by 16
-// <TCC_CTRLA_PRESCALER_DIV64_Val"> Divide by 64
-// <TCC_CTRLA_PRESCALER_DIV256_Val"> Divide by 256
-// <TCC_CTRLA_PRESCALER_DIV1024_Val"> Divide by 1024
-// <i> This defines the TCC0 prescaler value
-// <id> tcc_prescaler
-#ifndef CONF_TCC0_PRESCALER
-#define CONF_TCC0_PRESCALER TCC_CTRLA_PRESCALER_DIV8_Val
-#endif
-
-// <hidden>
-//<o> TCC0 Period Value <0x000000-0xFFFFFF>
-// <id> tcc_per
-#ifndef CONF_TCC0_PER
-#define CONF_TCC0_PER 0x2710
-#endif
-// </hidden>
-
-// </h>
-
-// <h> PWM Waveform Output settings
-// <o> TCC0 Waveform Period Value (uS) <0x00-0xFFFFFFFF>
-// <i> The unit of this value is us.
-// <id> tcc_arch_wave_per_val
-#ifndef CONF_TCC0_WAVE_PER_VAL
-#define CONF_TCC0_WAVE_PER_VAL 0x3e8
-#endif
-
-// <o> TCC0 Waveform Duty Value (0.1%) <0x00-0x03E8>
-// <i> The unit of this value is 1/1000.
-// <id> tcc_arch_wave_duty_val
-#ifndef CONF_TCC0_WAVE_DUTY_VAL
-#define CONF_TCC0_WAVE_DUTY_VAL 0x1f4
-#endif
-
-// <o> TCC0 Waveform Channel Select <0x00-0x03>
-// <i> Index of the Compare Channel register, into which the Waveform Duty Value is written.
-// <i> Give index of the Compare Channel register here in 0x00-0x03 range.
-// <id> tcc_arch_sel_ch
-#ifndef CONF_TCC0_SEL_CH
-#define CONF_TCC0_SEL_CH 0x1
-#endif
-
-/* Caculate pwm ccx register value based on WAVE_PER_VAL and Waveform Duty Value */
-#if CONF_TCC0_PRESCALER < TCC_CTRLA_PRESCALER_DIV64_Val
-#define CONF_TCC0_PER_REG \
- ((uint32_t)(((double)CONF_TCC0_WAVE_PER_VAL * CONF_GCLK_TCC0_FREQUENCY) / 1000000 / (1 << CONF_TCC0_PRESCALER) - 1))
-#define CONF_TCC0_CCX_REG ((uint32_t)(((double)(double)CONF_TCC0_PER_REG * CONF_TCC0_WAVE_DUTY_VAL) / 1000))
-
-#elif CONF_TCC0_PRESCALER == TCC_CTRLA_PRESCALER_DIV64_Val
-#define CONF_TCC0_PER_REG ((uint32_t)(((double)CONF_TCC0_WAVE_PER_VAL * CONF_GCLK_TCC0_FREQUENCY) / 64000000 - 1))
-#define CONF_TCC0_CCX_REG ((uint32_t)(((double)CONF_TCC0_PER_REG * CONF_TCC0_WAVE_DUTY_VAL) / 1000))
-
-#elif CONF_TCC0_PRESCALER == TCC_CTRLA_PRESCALER_DIV256_Val
-#define CONF_TCC0_PER_REG ((uint32_t)(((double)CONF_TCC0_WAVE_PER_VAL * CONF_GCLK_TCC0_FREQUENCY) / 256000000 - 1))
-#define CONF_TCC0_CCX_REG ((uint32_t)(((double)CONF_TCC0_PER_REG * CONF_TCC0_WAVE_DUTY_VAL) / 1000))
-
-#elif CONF_TCC0_PRESCALER == TCC_CTRLA_PRESCALER_DIV1024_Val
-#define CONF_TCC0_PER_REG ((uint32_t)(((double)CONF_TCC0_WAVE_PER_VAL * CONF_GCLK_TCC0_FREQUENCY) / 1024000000 - 1))
-#define CONF_TCC0_CCX_REG ((uint32_t)(((double)CONF_TCC0_PER_REG * CONF_TCC0_WAVE_DUTY_VAL) / 1000))
-#endif
-// </h>
-
-// <h> Advanced settings
-/* Commented intentionally. Timer uses fixed value of the following bit(s)/bitfield(s) of CTRL A register.
- * May be used by other abstractions based on TC. */
-//#define CONF_TCC0_RESOLUTION TCC_CTRLA_RESOLUTION_NONE_Val
-// <q> Run in standby
-// <i> Indicates whether the TCC0 will continue running in standby sleep mode or not
-// <id> tcc_arch_runstdby
-#ifndef CONF_TCC0_RUNSTDBY
-#define CONF_TCC0_RUNSTDBY 0
-#endif
-
-// <y> TCC0 Prescaler and Counter Synchronization Selection
-// <TCC_CTRLA_PRESCSYNC_GCLK_Val"> Reload or reset counter on next GCLK
-// <TCC_CTRLA_PRESCSYNC_PRESC_Val"> Reload or reset counter on next prescaler clock
-// <TCC_CTRLA_PRESCSYNC_RESYNC_Val"> Reload or reset counter on next GCLK and reset prescaler counter
-// <i> These bits select if on retrigger event, the Counter should be cleared or reloaded on the next GCLK_TCCx clock or on the next prescaled GCLK_TCCx clock.
-// <id> tcc_arch_prescsync
-#ifndef CONF_TCC0_PRESCSYNC
-#define CONF_TCC0_PRESCSYNC TCC_CTRLA_PRESCSYNC_GCLK_Val
-#endif
-
-// <y> TCC0 Waveform Generation Selection
-// <TCC_WAVE_WAVEGEN_NPWM_Val"> Single-slope PWM
-// <TCC_WAVE_WAVEGEN_DSCRITICAL_Val"> Dual-slope, critical interrupt/event at ZERO (DSCRITICAL)
-// <TCC_WAVE_WAVEGEN_DSBOTTOM_Val"> Dual-slope, interrupt/event at ZERO (DSBOTTOM)
-// <TCC_WAVE_WAVEGEN_DSBOTH_Val"> Dual-slope, interrupt/event at Top and ZERO (DSBOTH)
-// <TCC_WAVE_WAVEGEN_DSTOP_Val"> Dual-slope, interrupt/event at Top (DSTOP)
-// <id> tcc_arch_wavegen
-#ifndef CONF_TCC0_WAVEGEN
-#define CONF_TCC0_WAVEGEN TCC_WAVE_WAVEGEN_NPWM_Val
-#endif
-// <q> TCC0 Auto Lock
-// <i> Indicates whether the TCC0 Auto Lock is enabled or not
-// <id> tcc_arch_alock
-#ifndef CONF_TCC0_ALOCK
-#define CONF_TCC0_ALOCK 0
-#endif
-
-// <q> TCC0 Capture Channel 0 Enable
-// <i> Indicates whether the TCC0 Capture Channel 0 is enabled or not
-// <id> tcc_arch_cpten0
-#ifndef CONF_TCC0_CPTEN0
-#define CONF_TCC0_CPTEN0 0
-#endif
-
-// <q> TCC0 Capture Channel 1 Enable
-// <i> Indicates whether the TCC0 Capture Channel 1 is enabled or not
-// <id> tcc_arch_cpten1
-#ifndef CONF_TCC0_CPTEN1
-#define CONF_TCC0_CPTEN1 0
-#endif
-
-// <q> TCC0 Capture Channel 2 Enable
-// <i> Indicates whether the TCC0 Capture Channel 2 is enabled or not
-// <id> tcc_arch_cpten2
-#ifndef CONF_TCC0_CPTEN2
-#define CONF_TCC0_CPTEN2 0
-#endif
-
-// <q> TCC0 Capture Channel 3 Enable
-// <i> Indicates whether the TCC0 Capture Channel 3 is enabled or not
-// <id> tcc_arch_cpten3
-#ifndef CONF_TCC0_CPTEN3
-#define CONF_TCC0_CPTEN3 0
-#endif
-
-// <hidden>
-// <q> TCC0 Capture Channel 4 Enable
-// <i> Indicates whether the TCC0 Capture Channel 4 is enabled or not
-// <id> tcc_arch_cpten4
-#ifndef CONF_TCC0_CPTEN4
-#define CONF_TCC0_CPTEN4 0
-#endif
-// </hidden>
-// <hidden>
-// <q> TCC0 Capture Channel 5 Enable
-// <i> Indicates whether the TCC0 Capture Channel 5 is enabled or not
-// <id> tcc_arch_cpten5
-#ifndef CONF_TCC0_CPTEN5
-#define CONF_TCC0_CPTEN5 0
-#endif
-// </hidden>
-// <hidden>
-// <q> TCC0 Capture Channel 6 Enable
-// <i> Indicates whether the TCC0 Capture Channel 6 is enabled or not
-// <id> tcc_arch_cpten6
-#ifndef CONF_TCC0_CPTEN6
-#define CONF_TCC0_CPTEN6 0
-#endif
-// </hidden>
-// <hidden>
-// <q> TCC0 Capture Channel 7 Enable
-// <i> Indicates whether the TCC0 Capture Channel 7 is enabled or not
-// <id> tcc_arch_cpten7
-#ifndef CONF_TCC0_CPTEN7
-#define CONF_TCC0_CPTEN7 0
-#endif
-// </hidden>
-
-// <q> TCC0 Lock update
-// <i> Indicates whether the TCC0 Lock update is enabled or not
-// <id> tcc_arch_lupd
-#ifndef CONF_TCC0_LUPD
-#define CONF_TCC0_LUPD 1
-#endif
-
-/* Commented intentionally. Timer uses fixed value of the following bit(s)/bitfield(s) of CTRL B register.
- * May be used by other abstractions based on TC. */
-//#define CONF_TCC0_DIR 0
-//#define CONF_TCC0_ONESHOT 0
-
-/* Commented intentionally. No fault control for timers. */
-/*#define CONF_TCC0_FAULT_A_SRC TCC_FCTRLA_SRC_DISABLE_Val
-#define CONF_TCC0_FAULT_A_KEEP 0
-#define CONF_TCC0_FAULT_A_QUAL 0
-#define CONF_TCC0_FAULT_A_BLANK TCC_FCTRLA_BLANK_DISABLE_Val
-#define CONF_TCC0_FAULT_A_RESTART 0
-#define CONF_TCC0_FAULT_A_HALT TCC_FCTRLA_HALT_DISABLE_Val
-#define CONF_TCC0_FAULT_A_CHSEL TCC_FCTRLA_CHSEL_CC0_Val
-#define CONF_TCC0_FAULT_A_CAPTURE TCC_FCTRLA_CAPTURE_DISABLE_Val
-#define CONF_TCC0_FAULT_A_BLACNKPRESC 0
-#define CONF_TCC0_FAULT_A_BLANKVAL 0
-#define CONF_TCC0_FAULT_A_FILTERVAL 0
-
-#define CONF_TCC0_FAULT_B_SRC TCC_FCTRLB_SRC_DISABLE_Val
-#define CONF_TCC0_FAULT_B_KEEP 0
-#define CONF_TCC0_FAULT_B_QUAL 0
-#define CONF_TCC0_FAULT_B_BLANK TCC_FCTRLB_BLANK_DISABLE_Val
-#define CONF_TCC0_FAULT_B_RESTART 0
-#define CONF_TCC0_FAULT_B_HALT TCC_FCTRLB_HALT_DISABLE_Val
-#define CONF_TCC0_FAULT_B_CHSEL TCC_FCTRLB_CHSEL_CC0_Val
-#define CONF_TCC0_FAULT_B_CAPTURE TCC_FCTRLB_CAPTURE_DISABLE_Val
-#define CONF_TCC0_FAULT_B_BLACNKPRESC 0
-#define CONF_TCC0_FAULT_B_BLANKVAL 0
-#define CONF_TCC0_FAULT_B_FILTERVAL 0*/
-
-/* Commented intentionally. No dead-time control for timers. */
-/*#define CONF_TCC0_OTMX 0
-#define CONF_TCC0_DTIEN0 0
-#define CONF_TCC0_DTIEN1 0
-#define CONF_TCC0_DTIEN2 0
-#define CONF_TCC0_DTIEN3 0
-#define CONF_TCC0_DTHS 0*/
-
-/* Commented intentionally. No driver control for timers. */
-/*#define CONF_TCC0_NRE0 0
-#define CONF_TCC0_NRE1 0
-#define CONF_TCC0_NRE2 0
-#define CONF_TCC0_NRE3 0
-#define CONF_TCC0_NRE4 0
-#define CONF_TCC0_NRE5 0
-#define CONF_TCC0_NRE6 0
-#define CONF_TCC0_NRE7 0
-#define CONF_TCC0_NVR0 0
-#define CONF_TCC0_NVR1 0
-#define CONF_TCC0_NVR2 0
-#define CONF_TCC0_NVR3 0
-#define CONF_TCC0_NVR4 0
-#define CONF_TCC0_NVR5 0
-#define CONF_TCC0_NVR6 0
-#define CONF_TCC0_NVR7 0
-#define CONF_TCC0_INVEN0 0
-#define CONF_TCC0_INVEN1 0
-#define CONF_TCC0_INVEN2 0
-#define CONF_TCC0_INVEN3 0
-#define CONF_TCC0_INVEN4 0
-#define CONF_TCC0_INVEN5 0
-#define CONF_TCC0_INVEN6 0
-#define CONF_TCC0_INVEN7 0
-#define CONF_TCC0_FILTERVAL0 0
-#define CONF_TCC0_FILTERVAL1 0*/
-
-// <q> TCC0 Debug Running Mode
-// <i> Indicates whether the TCC0 Debug Running Mode is enabled or not
-// <id> tcc_arch_dbgrun
-#ifndef CONF_TCC0_DBGRUN
-#define CONF_TCC0_DBGRUN 0
-#endif
-
-/* Commented intentionally. Timer uses fixed value of the following bit(s)/bitfield(s) of Debug Control register.
- * May be used by other abstractions based on TC. */
-//#define CONF_TCC0_FDDBD 0
-
-// <e> Event control
-// <id> timer_event_control
-#ifndef CONF_TCC0_EVENT_CONTROL_ENABLE
-#define CONF_TCC0_EVENT_CONTROL_ENABLE 0
-#endif
-
-// <q> Match or Capture Channel 0 Event Output
-// <i> This bit indicates whether match/capture event on channel 0 is enabled and will be generated
-// <id> tcc_arch_mceo0
-#ifndef CONF_TCC0_MCEO0
-#define CONF_TCC0_MCEO0 0
-#endif
-
-// <q> Match or Capture Channel 0 Event Input
-// <i> This bit indicates whether match/capture 0 incoming event is enabled
-// <id> tcc_arch_mcei0
-#ifndef CONF_TCC0_MCEI0
-#define CONF_TCC0_MCEI0 0
-#endif
-// <q> Match or Capture Channel 1 Event Output
-// <i> This bit indicates whether match/capture event on channel 1 is enabled and will be generated
-// <id> tcc_arch_mceo1
-#ifndef CONF_TCC0_MCEO1
-#define CONF_TCC0_MCEO1 0
-#endif
-
-// <q> Match or Capture Channel 1 Event Input
-// <i> This bit indicates whether match/capture 1 incoming event is enabled
-// <id> tcc_arch_mcei1
-#ifndef CONF_TCC0_MCEI1
-#define CONF_TCC0_MCEI1 0
-#endif
-// <q> Match or Capture Channel 2 Event Output
-// <i> This bit indicates whether match/capture event on channel 2 is enabled and will be generated
-// <id> tcc_arch_mceo2
-#ifndef CONF_TCC0_MCEO2
-#define CONF_TCC0_MCEO2 0
-#endif
-
-// <q> Match or Capture Channel 2 Event Input
-// <i> This bit indicates whether match/capture 2 incoming event is enabled
-// <id> tcc_arch_mcei2
-#ifndef CONF_TCC0_MCEI2
-#define CONF_TCC0_MCEI2 0
-#endif
-// <q> Match or Capture Channel 3 Event Output
-// <i> This bit indicates whether match/capture event on channel 3 is enabled and will be generated
-// <id> tcc_arch_mceo3
-#ifndef CONF_TCC0_MCEO3
-#define CONF_TCC0_MCEO3 0
-#endif
-
-// <q> Match or Capture Channel 3 Event Input
-// <i> This bit indicates whether match/capture 3 incoming event is enabled
-// <id> tcc_arch_mcei3
-#ifndef CONF_TCC0_MCEI3
-#define CONF_TCC0_MCEI3 0
-#endif
-
-// <q> Timer/Counter Event Input 0
-// <i> This bit is used to enable input event 0 to the TCC
-// <id> tcc_arch_tcei0
-#ifndef CONF_TCC0_TCEI0
-#define CONF_TCC0_TCEI0 0
-#endif
-
-// <q> Timer/Counter Event Input 0 Invert
-// <i> This bit inverts the event 0 input
-// <id> tcc_arch_tceinv0
-#ifndef CONF_TCC0_TCINV0
-#define CONF_TCC0_TCINV0 0
-#endif
-// <q> Timer/Counter Event Input 1
-// <i> This bit is used to enable input event 1 to the TCC
-// <id> tcc_arch_tcei1
-#ifndef CONF_TCC0_TCEI1
-#define CONF_TCC0_TCEI1 0
-#endif
-
-// <q> Timer/Counter Event Input 1 Invert
-// <i> This bit inverts the event 1 input
-// <id> tcc_arch_tceinv1
-#ifndef CONF_TCC0_TCINV1
-#define CONF_TCC0_TCINV1 0
-#endif
-
-// <q> Timer/Counter Event Output
-// <i> This bit is used to enable the counter cycle event.
-//<id> tcc_arch_cnteo
-#ifndef CONF_TCC0_CNTEO
-#define CONF_TCC0_CNTEO 0
-#endif
-
-// <q> Re-trigger Event Output
-// <i> This bit is used to enable the counter re-trigger event.
-//<id> tcc_arch_trgeo
-#ifndef CONF_TCC0_TRGEO
-#define CONF_TCC0_TRGEO 0
-#endif
-
-// <q> Overflow/Underflow Event Output
-// <i> This bit is used to enable enable event on overflow/underflow.
-//<id> tcc_arch_ovfeo
-#ifndef CONF_TCC0_OVFEO
-#define CONF_TCC0_OVFEO 0
-#endif
-
-// <o> Timer/Counter Interrupt and Event Output Selection
-// <0=> An interrupt/event is generated when a new counter cycle starts
-// <1=> An interrupt/event is generated when a counter cycle ends
-// <2=> An interrupt/event is generated when a counter cycle ends, except for the first and last cycles
-// <3=> An interrupt/event is generated when a new counter cycle starts or a counter cycle ends
-// <i> These bits define on which part of the counter cycle the counter event output is generated
-// <id> tcc_arch_cntsel
-#ifndef CONF_TCC0_CNTSEL
-#define CONF_TCC0_CNTSEL 0
-#endif
-
-// <o> Timer/Counter Event Input 0 Action
-// <0=>Event action disabled
-// <1=>Start restart or re-trigger on event
-// <2=>Count on event
-// <3=>Start on event
-// <4=>Increment on event
-// <5=>Count on active state of asynchronous event
-// <6=>Capture overflow times (Max value)
-// <7=>Non-recoverable fault
-// <i> These bits define the action the TCC performs on TCE0 event input 0
-// <id> tcc_arch_evact0
-#ifndef CONF_TCC0_EVACT0
-#define CONF_TCC0_EVACT0 0
-#endif
-
-// <o> Timer/Counter Event Input 1 Action
-// <0=>Event action disabled
-// <1=>Re-trigger counter on event
-// <2=>Direction control
-// <3=>Stop counter on event
-// <4=>Decrement counter on event
-// <5=>Period capture value in CC0 register, pulse width capture value in CC1 register
-// <6=>Period capture value in CC1 register, pulse width capture value in CC0 register
-// <7=>Non-recoverable fault
-// <i> These bits define the action the TCC performs on TCE0 event input 0
-// <id> tcc_arch_evact1
-#ifndef CONF_TCC0_EVACT1
-#define CONF_TCC0_EVACT1 0
-#endif
-// </e>
-
-/* Commented intentionally. No pattern control for timers. */
-/*#define CONF_TCC0_PGE0 0
-#define CONF_TCC0_PGE1 0
-#define CONF_TCC0_PGE2 0
-#define CONF_TCC0_PGE3 0
-#define CONF_TCC0_PGE4 0
-#define CONF_TCC0_PGE5 0
-#define CONF_TCC0_PGE6 0
-#define CONF_TCC0_PGE7 0
-#define CONF_TCC0_PGV0 0
-#define CONF_TCC0_PGV1 0
-#define CONF_TCC0_PGV2 0
-#define CONF_TCC0_PGV3 0
-#define CONF_TCC0_PGV4 0
-#define CONF_TCC0_PGV5 0
-#define CONF_TCC0_PGV6 0
-#define CONF_TCC0_PGV7 0*/
-
-/* Commented intentionally. No pattern waveform control for timers. */
-/*#define CONF_TCC0_WAVEGEN TCC_WAVE_WAVEGEN_MFRQ_Val
-#define CONF_TCC0_RAMP TCC_WAVE_RAMP_RAMP1_Val
-#define CONF_TCC0_CIPEREN 0
-#define CONF_TCC0_CICCEN0 0
-#define CONF_TCC0_CICCEN1 0
-#define CONF_TCC0_CICCEN2 0
-#define CONF_TCC0_CICCEN3 0
-#define CONF_TCC0_POL0 0
-#define CONF_TCC0_POL1 0
-#define CONF_TCC0_POL2 0
-#define CONF_TCC0_POL3 0
-#define CONF_TCC0_POL4 0
-#define CONF_TCC0_POL5 0
-#define CONF_TCC0_POL6 0
-#define CONF_TCC0_POL7 0
-#define CONF_TCC0_SWAP0 0
-#define CONF_TCC0_SWAP1 0
-#define CONF_TCC0_SWAP2 0
-#define CONF_TCC0_SWAP3 0*/
-
-//<o> TCC0 Compare and Capture value 0 <0x00-0xFFFFFF>
-// <id> tcc_arch_cc0
-#ifndef CONF_TCC0_CC0
-#define CONF_TCC0_CC0 0x0
-#endif
-
-//<o> TCC0 Compare and Capture value 1 <0x00-0xFFFFFF>
-// <id> tcc_arch_cc1
-#ifndef CONF_TCC0_CC1
-#define CONF_TCC0_CC1 0x0
-#endif
-
-//<o> TCC0 Compare and Capture value 2 <0x00-0xFFFFFF>
-// <id> tcc_arch_cc2
-#ifndef CONF_TCC0_CC2
-#define CONF_TCC0_CC2 0x0
-#endif
-
-//<o> TCC0 Compare and Capture value 3 <0x00-0xFFFFFF>
-// <id> tcc_arch_cc3
-#ifndef CONF_TCC0_CC3
-#define CONF_TCC0_CC3 0x0
-#endif
-
-/* Commented intentionally. No pattern control for timers. */
-/*#define CONF_TCC0_PATTB_PGEB0 0
-#define CONF_TCC0_PATTB_PGEB1 0
-#define CONF_TCC0_PATTB_PGEB2 0
-#define CONF_TCC0_PATTB_PGEB3 0
-#define CONF_TCC0_PATTB_PGEB4 0
-#define CONF_TCC0_PATTB_PGEB5 0
-#define CONF_TCC0_PATTB_PGEB6 0
-#define CONF_TCC0_PATTB_PGEB7 0
-#define CONF_TCC0_PATTB_PGVB0 0
-#define CONF_TCC0_PATTB_PGVB1 0
-#define CONF_TCC0_PATTB_PGVB2 0
-#define CONF_TCC0_PATTB_PGVB3 0
-#define CONF_TCC0_PATTB_PGVB4 0
-#define CONF_TCC0_PATTB_PGVB5 0
-#define CONF_TCC0_PATTB_PGVB6 0
-#define CONF_TCC0_PATTB_PGVB7 0*/
-
-/* Commented intentionally. No waveform control for timers. */
-/*#define CONF_TCC0_WAVEGENB TCC_WAVEB_WAVEGENB_MFRQ_Val
-#define CONF_TCC0_RAMPB TCC_WAVE_RAMP_RAMP1_Val
-#define CONF_TCC0_CIPERENB 0
-#define CONF_TCC0_CICCEN0B 0
-#define CONF_TCC0_CICCEN1B 0
-#define CONF_TCC0_CICCEN2B 0
-#define CONF_TCC0_CICCEN3B 0
-#define CONF_TCC0_POL0B 0
-#define CONF_TCC0_POL1B 0
-#define CONF_TCC0_POL2B 0
-#define CONF_TCC0_POL3B 0
-#define CONF_TCC0_POL4B 0
-#define CONF_TCC0_POL5B 0
-#define CONF_TCC0_POL6B 0
-#define CONF_TCC0_POL7B 0
-#define CONF_TCC0_SWAP0B 0
-#define CONF_TCC0_SWAP1B 0
-#define CONF_TCC0_SWAP2B 0
-#define CONF_TCC0_SWAP3B 0*/
-
-/* Commented intentionally. No buffering for timers. */
-/*#define CONF_TCC0_PERB 0
-#define CONF_TCC0_CCB0 0
-#define CONF_TCC0_CCB1 0
-#define CONF_TCC0_CCB2 0
-#define CONF_TCC0_CCB3 0*/
-// </h>
-
-#define CONF_TCC0_CTRLA \
- TCC_CTRLA_PRESCALER(CONF_TCC0_PRESCALER) | (CONF_TCC0_RUNSTDBY << TCC_CTRLA_RUNSTDBY_Pos) \
- | TCC_CTRLA_PRESCSYNC(CONF_TCC0_PRESCSYNC) | (CONF_TCC0_CPTEN0 << TCC_CTRLA_CPTEN0_Pos) \
- | (CONF_TCC0_CPTEN1 << TCC_CTRLA_CPTEN1_Pos) | (CONF_TCC0_CPTEN2 << TCC_CTRLA_CPTEN2_Pos) \
- | (CONF_TCC0_CPTEN3 << TCC_CTRLA_CPTEN3_Pos) | (CONF_TCC0_ALOCK << TCC_CTRLA_ALOCK_Pos)
-#define CONF_TCC0_CTRLB (CONF_TCC0_LUPD << TCC_CTRLBSET_LUPD_Pos)
-#define CONF_TCC0_DBGCTRL (CONF_TCC0_DBGRUN << TCC_DBGCTRL_DBGRUN_Pos)
-#define CONF_TCC0_EVCTRL \
- TCC_EVCTRL_CNTSEL(CONF_TCC0_CNTSEL) | (CONF_TCC0_OVFEO << TCC_EVCTRL_OVFEO_Pos) \
- | (CONF_TCC0_TRGEO << TCC_EVCTRL_TRGEO_Pos) | (CONF_TCC0_CNTEO << TCC_EVCTRL_CNTEO_Pos) \
- | (CONF_TCC0_MCEO0 << TCC_EVCTRL_MCEO0_Pos) | (CONF_TCC0_MCEI0 << TCC_EVCTRL_MCEI0_Pos) \
- | (CONF_TCC0_MCEO1 << TCC_EVCTRL_MCEO1_Pos) | (CONF_TCC0_MCEI1 << TCC_EVCTRL_MCEI1_Pos) \
- | (CONF_TCC0_MCEO2 << TCC_EVCTRL_MCEO2_Pos) | (CONF_TCC0_MCEI2 << TCC_EVCTRL_MCEI2_Pos) \
- | (CONF_TCC0_MCEO3 << TCC_EVCTRL_MCEO3_Pos) | (CONF_TCC0_MCEI3 << TCC_EVCTRL_MCEI3_Pos) \
- | (CONF_TCC0_TCEI0 << TCC_EVCTRL_TCEI0_Pos) | (CONF_TCC0_TCEI1 << TCC_EVCTRL_TCEI1_Pos) \
- | (CONF_TCC0_TCINV0 << TCC_EVCTRL_TCINV0_Pos) | (CONF_TCC0_TCINV1 << TCC_EVCTRL_TCINV1_Pos) \
- | TCC_EVCTRL_EVACT1(CONF_TCC0_EVACT1) | TCC_EVCTRL_EVACT0(CONF_TCC0_EVACT0)
-
-// <<< end of configuration section >>>
-
-#endif // HPL_TCC_CONFIG_H