diff options
Diffstat (limited to 'Sensor Watch BME280 Project/app.c')
-rw-r--r-- | Sensor Watch BME280 Project/app.c | 332 |
1 files changed, 256 insertions, 76 deletions
diff --git a/Sensor Watch BME280 Project/app.c b/Sensor Watch BME280 Project/app.c index b34e529c..bf4969fd 100644 --- a/Sensor Watch BME280 Project/app.c +++ b/Sensor Watch BME280 Project/app.c @@ -1,38 +1,13 @@ #include <stdio.h> #include <string.h> +#include <math.h> #include "watch.h" #include "bme280.h" -typedef enum ApplicationMode { - MODE_TEMPERATURE = 0, - MODE_HUMIDITY, - MODE_OFF, -} ApplicationMode; - -typedef struct ApplicationState { - ApplicationMode mode; - int light_ticks; - bool led_on; - bool needs_beep; - uint16_t dig_T1; - int16_t dig_T2; - int16_t dig_T3; - uint8_t dig_H1; - int16_t dig_H2; - uint8_t dig_H3; - int16_t dig_H4; - int16_t dig_H5; - int8_t dig_H6; -} ApplicationState; +#include "app.h" ApplicationState application_state; - -void cb_light_pressed(); -void cb_mode_pressed(); -void cb_tick(); - -float read_temperature(int32_t *p_t_fine); -float read_humidity(int32_t t_fine); +char buf[16] = {0}; /** * @brief Zeroes out the application state struct. @@ -41,19 +16,22 @@ void app_init() { memset(&application_state, 0, sizeof(application_state)); } -/** - * @todo stash the BME280's calibration values in backup memory so we don't have to ask again - */ void app_wake_from_deep_sleep() { + // This app does not support deep sleep mode. } -/** - * Enables the MODE button, the display and the sensor, and grabs calibration data. - */ void app_setup() { + struct calendar_date_time date_time; + watch_get_date_time(&date_time); + if (date_time.date.year < 2020) { + date_time.date.year = 2020; + watch_set_date_time(date_time); + } + watch_enable_buttons(); watch_register_button_callback(BTN_MODE, cb_mode_pressed); watch_register_button_callback(BTN_LIGHT, cb_light_pressed); + watch_register_button_callback(BTN_ALARM, cb_alarm_pressed); watch_enable_buzzer(); watch_enable_led(false); @@ -79,7 +57,7 @@ void app_setup() { (watch_i2c_read8(BME280_ADDRESS, BME280_REGISTER_DIG_H5) >> 4); application_state.dig_H6 = (int8_t)watch_i2c_read8(BME280_ADDRESS, BME280_REGISTER_DIG_H6); - watch_i2c_write8(BME280_ADDRESS, BME280_REGISTER_CONTROL_HUMID, BME280_CONTROL_HUMID_SAMPLING_X16); + watch_i2c_write8(BME280_ADDRESS, BME280_REGISTER_CONTROL_HUMID, BME280_CONTROL_HUMID_SAMPLING_NONE); watch_i2c_write8(BME280_ADDRESS, BME280_REGISTER_CONTROL, BME280_CONTROL_TEMPERATURE_SAMPLING_X16 | BME280_CONTROL_PRESSURE_SAMPLING_NONE | BME280_CONTROL_MODE_FORCED); @@ -105,22 +83,28 @@ void app_wake_from_sleep() { * Displays the temperature and humidity on screen, or a string indicating no measurements are being taken. */ bool app_loop() { - int32_t t_fine; - float temperature; - float humidity; - char buf[11] = {0}; + // play a beep if the mode has changed in response to a user's press of the MODE button + if (application_state.mode_changed) { + // low note for nonzero case, high note for return to clock + watch_buzzer_play_note(application_state.mode ? BUZZER_NOTE_C7 : BUZZER_NOTE_C8, 100); + application_state.mode_changed = false; + } - if (application_state.needs_beep) { - watch_buzzer_play_note(BUZZER_NOTE_A6, 100); - application_state.needs_beep = false; + // If the user is not in clock mode and the mode timeout has expired, return them to clock mode + if (application_state.mode != MODE_CLOCK && application_state.mode_ticks == 0) { + application_state.mode = MODE_CLOCK; + application_state.mode_changed = true; } + // If the LED is off and should be on, turn it on if (application_state.light_ticks > 0 && !application_state.led_on) { - watch_set_led_yellow(); + watch_set_led_green(); application_state.led_on = true; } + // if the LED is on and should be off, turn it off if (application_state.led_on && application_state.light_ticks == 0) { + // unless the user is holding down the LIGHT button, in which case, give them more time. if (watch_get_pin_level(BTN_LIGHT)) { application_state.light_ticks = 3; } else { @@ -130,34 +114,31 @@ bool app_loop() { } switch (application_state.mode) { - case MODE_TEMPERATURE: - // take one reading - watch_i2c_write8(BME280_ADDRESS, BME280_REGISTER_CONTROL, BME280_CONTROL_TEMPERATURE_SAMPLING_X16 | - BME280_CONTROL_MODE_FORCED); - // wait for reading to finish - while(watch_i2c_read8(BME280_ADDRESS, BME280_REGISTER_STATUS) & BME280_STATUS_UPDATING_MASK); - temperature = read_temperature(NULL); - sprintf(buf, "TE %4.1f#C", temperature); - watch_display_string(buf, 0); - watch_clear_colon(); - break; - case MODE_HUMIDITY: - // take one reading - watch_i2c_write8(BME280_ADDRESS, BME280_REGISTER_CONTROL, BME280_CONTROL_TEMPERATURE_SAMPLING_X16 | - BME280_CONTROL_MODE_FORCED); - // wait for reading to finish - while(watch_i2c_read8(BME280_ADDRESS, BME280_REGISTER_STATUS) & BME280_STATUS_UPDATING_MASK); - temperature = read_temperature(&t_fine); - humidity = read_humidity(t_fine); - sprintf(buf, "HU rH %3d", (int)humidity); - watch_display_string(buf, 0); - watch_set_colon(); - break; - case MODE_OFF: - watch_display_string(" Sleep ", 0); - watch_clear_pixel(1, 16); + case MODE_CLOCK: + do_clock_mode(); + break; + case MODE_TEMP: + do_temp_mode(); + break; + case MODE_LOG: + do_log_mode(); + break; + case MODE_PREFS: + do_prefs_mode(); + break; + case MODE_SET: + do_set_time_mode(); + break; + case NUM_MODES: + // dummy case, just silences a warning + break; } + application_state.mode_changed = false; + + delay_ms(250); + application_state.debounce_wait = false; + return true; } @@ -183,7 +164,11 @@ float read_temperature(int32_t *p_t_fine) { // if we got a pointer to a t_fine, return it by reference (for humidity calculation). if (p_t_fine != NULL) *p_t_fine = t_fine; - return ((t_fine * 5 + 128) >> 8) / 100.0; + if (application_state.is_fahrenheit) { + return (((t_fine * 5 + 128) >> 8) / 100.0) * 1.8 + 32; + } else { + return ((t_fine * 5 + 128) >> 8) / 100.0; + } } /** @@ -208,17 +193,212 @@ float read_humidity(int32_t t_fine) { return h / 1024.0; } +void log_data() { + struct calendar_date_time date_time; + watch_get_date_time(&date_time); + uint8_t hour = date_time.time.sec; + int8_t temperature = read_temperature(NULL); + + for(int i = 0; i < MAX_DATA_POINTS - 1; i++) { + application_state.logged_data[i] = application_state.logged_data[i + 1]; + } + application_state.logged_data[MAX_DATA_POINTS - 1].is_valid = true; + application_state.logged_data[MAX_DATA_POINTS - 1].hour = hour; + application_state.logged_data[MAX_DATA_POINTS - 1].temperature = temperature; +} + +void do_clock_mode() { + struct calendar_date_time date_time; + const char months[12][3] = {"JA", "FE", "MR", "AR", "MA", "JN", "JL", "AU", "SE", "OC", "NO", "dE"}; + + watch_get_date_time(&date_time); + watch_display_string((char *)months[date_time.date.month - 1], 0); + sprintf(buf, "%2d%2d%02d%02d", date_time.date.day, date_time.time.hour, date_time.time.min, date_time.time.sec); + watch_display_string(buf, 2); + watch_set_colon(); +} + +void do_temp_mode() { + int32_t t_fine; + float temperature; + float humidity; + + // take one reading + watch_i2c_write8(BME280_ADDRESS, BME280_REGISTER_CONTROL, BME280_CONTROL_TEMPERATURE_SAMPLING_X16 | + BME280_CONTROL_MODE_FORCED); + // wait for reading to finish + while(watch_i2c_read8(BME280_ADDRESS, BME280_REGISTER_STATUS) & BME280_STATUS_UPDATING_MASK); + temperature = read_temperature(&t_fine); + humidity = read_humidity(t_fine); + if (application_state.show_humidity) { + sprintf(buf, "TE%2d%4.1f#%c", (int)(humidity / 10), temperature), application_state.is_fahrenheit ? 'F' : 'C'; + } else { + sprintf(buf, "TE %4.1f#%c", temperature, application_state.is_fahrenheit ? 'F' : 'C'); + } + watch_display_string(buf, 0); + watch_clear_colon(); +} + +void do_log_mode() { + bool is_valid = (uint8_t)(application_state.logged_data[MAX_DATA_POINTS - 1 - application_state.page].is_valid); + uint8_t hour = (uint8_t)(application_state.logged_data[MAX_DATA_POINTS - 1 - application_state.page].hour); + int8_t temperature = (int8_t)(application_state.logged_data[MAX_DATA_POINTS - 1 - application_state.page].temperature); + if (!is_valid) { + sprintf(buf, "LO%2d------", application_state.page); + watch_clear_colon(); + } else { + sprintf(buf, "LO%2d%2d%4d", application_state.page, hour, temperature); + watch_set_colon(); + } + watch_display_string(buf, 0); +} + +void log_mode_handle_primary_button() { + application_state.page++; + if (application_state.page == MAX_DATA_POINTS) application_state.page = 0; +} + +void do_prefs_mode() { + sprintf(buf, "PR CorF %c", application_state.is_fahrenheit ? 'F' : 'C'); + watch_display_string(buf, 0); + watch_clear_colon(); +} + +void prefs_mode_handle_primary_button() { + // TODO: add rest of preferences (12/24, humidity, LED color, etc.) + // for now only one, C or F +} + +void prefs_mode_handle_secondary_button() { + application_state.is_fahrenheit = !application_state.is_fahrenheit; +} + +void do_set_time_mode() { + struct calendar_date_time date_time; + + watch_get_date_time(&date_time); + watch_display_string(" ", 0); + switch (application_state.page) { + case 0: // hour + sprintf(buf, "ST t%2d", date_time.time.hour); + break; + case 1: // minute + sprintf(buf, "ST t %02d", date_time.time.min); + break; + case 2: // second + sprintf(buf, "ST t %02d", date_time.time.sec); + break; + case 3: // year + sprintf(buf, "ST d%2d", date_time.date.year - 2000); + break; + case 4: // month + sprintf(buf, "ST d %02d", date_time.date.month); + break; + case 5: // day + sprintf(buf, "ST d %02d", date_time.date.day); + break; + } + watch_display_string(buf, 0); + watch_set_pixel(1, 12); // required for T in position 1 +} + +void set_time_mode_handle_primary_button() { + application_state.page++; + if (application_state.page == 6) application_state.page = 0; +} + +void set_time_mode_handle_secondary_button() { + struct calendar_date_time date_time; + watch_get_date_time(&date_time); + const uint8_t days_in_month[12] = {31, 28, 31, 30, 31, 30, 30, 31, 30, 31, 30, 31}; + + switch (application_state.page) { + case 0: // hour + date_time.time.hour = (date_time.time.hour + 1) % 24; + break; + case 1: // minute + date_time.time.min = (date_time.time.min + 1) % 60; + break; + case 2: // second + date_time.time.sec = 0; + break; + case 3: // year + // only allow 2021-2030. fix this sometime next decade + date_time.date.year = ((date_time.date.year % 10) + 1) + 2020; + break; + case 4: // month + date_time.date.month = ((date_time.date.month + 1) % 12); + break; + case 5: // day + date_time.date.day = date_time.date.day + 1; + // can't set to the 29th on a leap year. if it's february 29, set to 11:59 on the 28th. + // and it should roll over. + if (date_time.date.day > days_in_month[date_time.date.month - 1]) { + date_time.date.day = 1; + } + break; + } + watch_set_date_time(date_time); +} + void cb_mode_pressed() { - application_state.mode = (application_state.mode + 1) % 3; - application_state.needs_beep = true; + if (application_state.debounce_wait) return; + application_state.debounce_wait = true; + + application_state.mode = (application_state.mode + 1) % NUM_MODES; + application_state.mode_changed = true; + application_state.mode_ticks = 300; + application_state.page = 0; +} + +void cb_light_pressed() { + if (application_state.debounce_wait) return; + application_state.debounce_wait = true; + + switch (application_state.mode) { + case MODE_PREFS: + prefs_mode_handle_secondary_button(); + break; + case MODE_SET: + set_time_mode_handle_secondary_button(); + break; + default: + application_state.light_ticks = 3; + break; + } +} + +void cb_alarm_pressed() { + if (application_state.debounce_wait) return; + application_state.debounce_wait = true; + + switch (application_state.mode) { + case MODE_LOG: + log_mode_handle_primary_button(); + break; + case MODE_PREFS: + prefs_mode_handle_primary_button(); + break; + case MODE_SET: + set_time_mode_handle_primary_button(); + break; + default: + break; + } } void cb_tick() { + // TODO: use alarm interrupt to trigger data acquisition. + struct calendar_date_time date_time; + watch_get_date_time(&date_time); + if (date_time.time.min == 0 && date_time.time.sec == 0) { + log_data(); + } + if (application_state.light_ticks > 0) { application_state.light_ticks--; } -} - -void cb_light_pressed() { - application_state.light_ticks = 3; + if (application_state.mode_ticks > 0) { + application_state.mode_ticks--; + } } |