diff options
Diffstat (limited to 'Sensor Watch Starter Project/config/hpl_eic_config.h')
| -rw-r--r-- | Sensor Watch Starter Project/config/hpl_eic_config.h | 730 |
1 files changed, 0 insertions, 730 deletions
diff --git a/Sensor Watch Starter Project/config/hpl_eic_config.h b/Sensor Watch Starter Project/config/hpl_eic_config.h deleted file mode 100644 index 3b268a10..00000000 --- a/Sensor Watch Starter Project/config/hpl_eic_config.h +++ /dev/null @@ -1,730 +0,0 @@ -/* Auto-generated config file hpl_eic_config.h */ -#ifndef HPL_EIC_CONFIG_H -#define HPL_EIC_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -// <h> Basic Settings -// <o> Clock Selection -// <i> Indicates which clock used, The EIC can be clocked either by GCLK_EIC when higher frequency than 32KHz is required for filtering or -// <i> either by CLK_ULP32K when power consumption is the priority. -// <0x0=> Clocked by GCLK -// <0x1=> Clocked by ULPOSC32K -// <id> eic_arch_cksel -#ifndef CONF_EIC_CKSEL -#define CONF_EIC_CKSEL 0 -#endif - -// </h> - -// <e> Non-Maskable Interrupt Control -// <id> eic_arch_nmi_ctrl -#ifndef CONF_EIC_ENABLE_NMI_CTRL -#define CONF_EIC_ENABLE_NMI_CTRL 0 -#endif - -// <q> Non-Maskable Interrupt Filter Enable -// <i> Indicates whether the mon-maskable interrupt filter is enabled or not -// <id> eic_arch_nmifilten -#ifndef CONF_EIC_NMIFILTEN -#define CONF_EIC_NMIFILTEN 0 -#endif - -// <y> Non-Maskable Interrupt Sense -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines non-maskable interrupt sense -// <id> eic_arch_nmisense -#ifndef CONF_EIC_NMISENSE -#define CONF_EIC_NMISENSE EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> Asynchronous Edge Detection Mode -// <i> Indicates the interrupt detection mode operated synchronously or asynchronousl -// <id> eic_arch_nmiasynch -#ifndef CONF_EIC_NMIASYNCH -#define CONF_EIC_NMIASYNCH 0 -#endif -// </e> - -// <e> Interrupt 0 Settings -// <id> eic_arch_enable_irq_setting0 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING0 -#define CONF_EIC_ENABLE_IRQ_SETTING0 0 -#endif - -// <q> External Interrupt 0 Filter Enable -// <i> Indicates whether the external interrupt 0 filter is enabled or not -// <id> eic_arch_filten0 -#ifndef CONF_EIC_FILTEN0 -#define CONF_EIC_FILTEN0 0 -#endif - -// <q> External Interrupt 0 Event Output Enable -// <i> Indicates whether the external interrupt 0 event output is enabled or not -// <id> eic_arch_extinteo0 -#ifndef CONF_EIC_EXTINTEO0 -#define CONF_EIC_EXTINTEO0 0 -#endif - -// <y> Input 0 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense0 -#ifndef CONF_EIC_SENSE0 -#define CONF_EIC_SENSE0 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 0 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 0 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch0 -#ifndef CONF_EIC_ASYNCH0 -#define CONF_EIC_ASYNCH0 0 -#endif - -// </e> - -// <e> Interrupt 1 Settings -// <id> eic_arch_enable_irq_setting1 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING1 -#define CONF_EIC_ENABLE_IRQ_SETTING1 0 -#endif - -// <q> External Interrupt 1 Filter Enable -// <i> Indicates whether the external interrupt 1 filter is enabled or not -// <id> eic_arch_filten1 -#ifndef CONF_EIC_FILTEN1 -#define CONF_EIC_FILTEN1 0 -#endif - -// <q> External Interrupt 1 Event Output Enable -// <i> Indicates whether the external interrupt 1 event output is enabled or not -// <id> eic_arch_extinteo1 -#ifndef CONF_EIC_EXTINTEO1 -#define CONF_EIC_EXTINTEO1 0 -#endif - -// <y> Input 1 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense1 -#ifndef CONF_EIC_SENSE1 -#define CONF_EIC_SENSE1 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 1 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 1 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch1 -#ifndef CONF_EIC_ASYNCH1 -#define CONF_EIC_ASYNCH1 0 -#endif - -// </e> - -// <e> Interrupt 2 Settings -// <id> eic_arch_enable_irq_setting2 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING2 -#define CONF_EIC_ENABLE_IRQ_SETTING2 0 -#endif - -// <q> External Interrupt 2 Filter Enable -// <i> Indicates whether the external interrupt 2 filter is enabled or not -// <id> eic_arch_filten2 -#ifndef CONF_EIC_FILTEN2 -#define CONF_EIC_FILTEN2 0 -#endif - -// <q> External Interrupt 2 Event Output Enable -// <i> Indicates whether the external interrupt 2 event output is enabled or not -// <id> eic_arch_extinteo2 -#ifndef CONF_EIC_EXTINTEO2 -#define CONF_EIC_EXTINTEO2 0 -#endif - -// <y> Input 2 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense2 -#ifndef CONF_EIC_SENSE2 -#define CONF_EIC_SENSE2 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 2 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 2 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch2 -#ifndef CONF_EIC_ASYNCH2 -#define CONF_EIC_ASYNCH2 0 -#endif - -// </e> - -// <e> Interrupt 3 Settings -// <id> eic_arch_enable_irq_setting3 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING3 -#define CONF_EIC_ENABLE_IRQ_SETTING3 0 -#endif - -// <q> External Interrupt 3 Filter Enable -// <i> Indicates whether the external interrupt 3 filter is enabled or not -// <id> eic_arch_filten3 -#ifndef CONF_EIC_FILTEN3 -#define CONF_EIC_FILTEN3 0 -#endif - -// <q> External Interrupt 3 Event Output Enable -// <i> Indicates whether the external interrupt 3 event output is enabled or not -// <id> eic_arch_extinteo3 -#ifndef CONF_EIC_EXTINTEO3 -#define CONF_EIC_EXTINTEO3 0 -#endif - -// <y> Input 3 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense3 -#ifndef CONF_EIC_SENSE3 -#define CONF_EIC_SENSE3 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 3 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 3 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch3 -#ifndef CONF_EIC_ASYNCH3 -#define CONF_EIC_ASYNCH3 0 -#endif - -// </e> - -// <e> Interrupt 4 Settings -// <id> eic_arch_enable_irq_setting4 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING4 -#define CONF_EIC_ENABLE_IRQ_SETTING4 0 -#endif - -// <q> External Interrupt 4 Filter Enable -// <i> Indicates whether the external interrupt 4 filter is enabled or not -// <id> eic_arch_filten4 -#ifndef CONF_EIC_FILTEN4 -#define CONF_EIC_FILTEN4 0 -#endif - -// <q> External Interrupt 4 Event Output Enable -// <i> Indicates whether the external interrupt 4 event output is enabled or not -// <id> eic_arch_extinteo4 -#ifndef CONF_EIC_EXTINTEO4 -#define CONF_EIC_EXTINTEO4 0 -#endif - -// <y> Input 4 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense4 -#ifndef CONF_EIC_SENSE4 -#define CONF_EIC_SENSE4 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 4 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 4 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch4 -#ifndef CONF_EIC_ASYNCH4 -#define CONF_EIC_ASYNCH4 0 -#endif - -// </e> - -// <e> Interrupt 5 Settings -// <id> eic_arch_enable_irq_setting5 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING5 -#define CONF_EIC_ENABLE_IRQ_SETTING5 1 -#endif - -// <q> External Interrupt 5 Filter Enable -// <i> Indicates whether the external interrupt 5 filter is enabled or not -// <id> eic_arch_filten5 -#ifndef CONF_EIC_FILTEN5 -#define CONF_EIC_FILTEN5 0 -#endif - -// <q> External Interrupt 5 Event Output Enable -// <i> Indicates whether the external interrupt 5 event output is enabled or not -// <id> eic_arch_extinteo5 -#ifndef CONF_EIC_EXTINTEO5 -#define CONF_EIC_EXTINTEO5 0 -#endif - -// <y> Input 5 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense5 -#ifndef CONF_EIC_SENSE5 -#define CONF_EIC_SENSE5 EIC_NMICTRL_NMISENSE_RISE_Val -#endif - -// <q> External Interrupt 5 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 5 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch5 -#ifndef CONF_EIC_ASYNCH5 -#define CONF_EIC_ASYNCH5 0 -#endif - -// </e> - -// <e> Interrupt 6 Settings -// <id> eic_arch_enable_irq_setting6 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING6 -#define CONF_EIC_ENABLE_IRQ_SETTING6 1 -#endif - -// <q> External Interrupt 6 Filter Enable -// <i> Indicates whether the external interrupt 6 filter is enabled or not -// <id> eic_arch_filten6 -#ifndef CONF_EIC_FILTEN6 -#define CONF_EIC_FILTEN6 0 -#endif - -// <q> External Interrupt 6 Event Output Enable -// <i> Indicates whether the external interrupt 6 event output is enabled or not -// <id> eic_arch_extinteo6 -#ifndef CONF_EIC_EXTINTEO6 -#define CONF_EIC_EXTINTEO6 0 -#endif - -// <y> Input 6 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense6 -#ifndef CONF_EIC_SENSE6 -#define CONF_EIC_SENSE6 EIC_NMICTRL_NMISENSE_RISE_Val -#endif - -// <q> External Interrupt 6 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 6 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch6 -#ifndef CONF_EIC_ASYNCH6 -#define CONF_EIC_ASYNCH6 0 -#endif - -// </e> - -// <e> Interrupt 7 Settings -// <id> eic_arch_enable_irq_setting7 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING7 -#define CONF_EIC_ENABLE_IRQ_SETTING7 1 -#endif - -// <q> External Interrupt 7 Filter Enable -// <i> Indicates whether the external interrupt 7 filter is enabled or not -// <id> eic_arch_filten7 -#ifndef CONF_EIC_FILTEN7 -#define CONF_EIC_FILTEN7 0 -#endif - -// <q> External Interrupt 7 Event Output Enable -// <i> Indicates whether the external interrupt 7 event output is enabled or not -// <id> eic_arch_extinteo7 -#ifndef CONF_EIC_EXTINTEO7 -#define CONF_EIC_EXTINTEO7 0 -#endif - -// <y> Input 7 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense7 -#ifndef CONF_EIC_SENSE7 -#define CONF_EIC_SENSE7 EIC_NMICTRL_NMISENSE_RISE_Val -#endif - -// <q> External Interrupt 7 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 7 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch7 -#ifndef CONF_EIC_ASYNCH7 -#define CONF_EIC_ASYNCH7 0 -#endif - -// </e> - -// <e> Interrupt 8 Settings -// <id> eic_arch_enable_irq_setting8 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING8 -#define CONF_EIC_ENABLE_IRQ_SETTING8 0 -#endif - -// <q> External Interrupt 8 Filter Enable -// <i> Indicates whether the external interrupt 8 filter is enabled or not -// <id> eic_arch_filten8 -#ifndef CONF_EIC_FILTEN8 -#define CONF_EIC_FILTEN8 0 -#endif - -// <q> External Interrupt 8 Event Output Enable -// <i> Indicates whether the external interrupt 8 event output is enabled or not -// <id> eic_arch_extinteo8 -#ifndef CONF_EIC_EXTINTEO8 -#define CONF_EIC_EXTINTEO8 0 -#endif - -// <y> Input 8 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense8 -#ifndef CONF_EIC_SENSE8 -#define CONF_EIC_SENSE8 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 8 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 8 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch8 -#ifndef CONF_EIC_ASYNCH8 -#define CONF_EIC_ASYNCH8 0 -#endif - -// </e> - -// <e> Interrupt 9 Settings -// <id> eic_arch_enable_irq_setting9 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING9 -#define CONF_EIC_ENABLE_IRQ_SETTING9 0 -#endif - -// <q> External Interrupt 9 Filter Enable -// <i> Indicates whether the external interrupt 9 filter is enabled or not -// <id> eic_arch_filten9 -#ifndef CONF_EIC_FILTEN9 -#define CONF_EIC_FILTEN9 0 -#endif - -// <q> External Interrupt 9 Event Output Enable -// <i> Indicates whether the external interrupt 9 event output is enabled or not -// <id> eic_arch_extinteo9 -#ifndef CONF_EIC_EXTINTEO9 -#define CONF_EIC_EXTINTEO9 0 -#endif - -// <y> Input 9 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense9 -#ifndef CONF_EIC_SENSE9 -#define CONF_EIC_SENSE9 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 9 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 9 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch9 -#ifndef CONF_EIC_ASYNCH9 -#define CONF_EIC_ASYNCH9 0 -#endif - -// </e> - -// <e> Interrupt 10 Settings -// <id> eic_arch_enable_irq_setting10 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING10 -#define CONF_EIC_ENABLE_IRQ_SETTING10 0 -#endif - -// <q> External Interrupt 10 Filter Enable -// <i> Indicates whether the external interrupt 10 filter is enabled or not -// <id> eic_arch_filten10 -#ifndef CONF_EIC_FILTEN10 -#define CONF_EIC_FILTEN10 0 -#endif - -// <q> External Interrupt 10 Event Output Enable -// <i> Indicates whether the external interrupt 10 event output is enabled or not -// <id> eic_arch_extinteo10 -#ifndef CONF_EIC_EXTINTEO10 -#define CONF_EIC_EXTINTEO10 0 -#endif - -// <y> Input 10 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense10 -#ifndef CONF_EIC_SENSE10 -#define CONF_EIC_SENSE10 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 10 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 10 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch10 -#ifndef CONF_EIC_ASYNCH10 -#define CONF_EIC_ASYNCH10 0 -#endif - -// </e> - -// <e> Interrupt 11 Settings -// <id> eic_arch_enable_irq_setting11 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING11 -#define CONF_EIC_ENABLE_IRQ_SETTING11 0 -#endif - -// <q> External Interrupt 11 Filter Enable -// <i> Indicates whether the external interrupt 11 filter is enabled or not -// <id> eic_arch_filten11 -#ifndef CONF_EIC_FILTEN11 -#define CONF_EIC_FILTEN11 0 -#endif - -// <q> External Interrupt 11 Event Output Enable -// <i> Indicates whether the external interrupt 11 event output is enabled or not -// <id> eic_arch_extinteo11 -#ifndef CONF_EIC_EXTINTEO11 -#define CONF_EIC_EXTINTEO11 0 -#endif - -// <y> Input 11 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense11 -#ifndef CONF_EIC_SENSE11 -#define CONF_EIC_SENSE11 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 11 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 11 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch11 -#ifndef CONF_EIC_ASYNCH11 -#define CONF_EIC_ASYNCH11 0 -#endif - -// </e> - -// <e> Interrupt 12 Settings -// <id> eic_arch_enable_irq_setting12 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING12 -#define CONF_EIC_ENABLE_IRQ_SETTING12 0 -#endif - -// <q> External Interrupt 12 Filter Enable -// <i> Indicates whether the external interrupt 12 filter is enabled or not -// <id> eic_arch_filten12 -#ifndef CONF_EIC_FILTEN12 -#define CONF_EIC_FILTEN12 0 -#endif - -// <q> External Interrupt 12 Event Output Enable -// <i> Indicates whether the external interrupt 12 event output is enabled or not -// <id> eic_arch_extinteo12 -#ifndef CONF_EIC_EXTINTEO12 -#define CONF_EIC_EXTINTEO12 0 -#endif - -// <y> Input 12 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense12 -#ifndef CONF_EIC_SENSE12 -#define CONF_EIC_SENSE12 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 12 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 12 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch12 -#ifndef CONF_EIC_ASYNCH12 -#define CONF_EIC_ASYNCH12 0 -#endif - -// </e> - -// <e> Interrupt 13 Settings -// <id> eic_arch_enable_irq_setting13 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING13 -#define CONF_EIC_ENABLE_IRQ_SETTING13 0 -#endif - -// <q> External Interrupt 13 Filter Enable -// <i> Indicates whether the external interrupt 13 filter is enabled or not -// <id> eic_arch_filten13 -#ifndef CONF_EIC_FILTEN13 -#define CONF_EIC_FILTEN13 0 -#endif - -// <q> External Interrupt 13 Event Output Enable -// <i> Indicates whether the external interrupt 13 event output is enabled or not -// <id> eic_arch_extinteo13 -#ifndef CONF_EIC_EXTINTEO13 -#define CONF_EIC_EXTINTEO13 0 -#endif - -// <y> Input 13 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense13 -#ifndef CONF_EIC_SENSE13 -#define CONF_EIC_SENSE13 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 13 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 13 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch13 -#ifndef CONF_EIC_ASYNCH13 -#define CONF_EIC_ASYNCH13 0 -#endif - -// </e> - -// <e> Interrupt 14 Settings -// <id> eic_arch_enable_irq_setting14 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING14 -#define CONF_EIC_ENABLE_IRQ_SETTING14 0 -#endif - -// <q> External Interrupt 14 Filter Enable -// <i> Indicates whether the external interrupt 14 filter is enabled or not -// <id> eic_arch_filten14 -#ifndef CONF_EIC_FILTEN14 -#define CONF_EIC_FILTEN14 0 -#endif - -// <q> External Interrupt 14 Event Output Enable -// <i> Indicates whether the external interrupt 14 event output is enabled or not -// <id> eic_arch_extinteo14 -#ifndef CONF_EIC_EXTINTEO14 -#define CONF_EIC_EXTINTEO14 0 -#endif - -// <y> Input 14 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense14 -#ifndef CONF_EIC_SENSE14 -#define CONF_EIC_SENSE14 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 14 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 14 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch14 -#ifndef CONF_EIC_ASYNCH14 -#define CONF_EIC_ASYNCH14 0 -#endif - -// </e> - -// <e> Interrupt 15 Settings -// <id> eic_arch_enable_irq_setting15 -#ifndef CONF_EIC_ENABLE_IRQ_SETTING15 -#define CONF_EIC_ENABLE_IRQ_SETTING15 0 -#endif - -// <q> External Interrupt 15 Filter Enable -// <i> Indicates whether the external interrupt 15 filter is enabled or not -// <id> eic_arch_filten15 -#ifndef CONF_EIC_FILTEN15 -#define CONF_EIC_FILTEN15 0 -#endif - -// <q> External Interrupt 15 Event Output Enable -// <i> Indicates whether the external interrupt 15 event output is enabled or not -// <id> eic_arch_extinteo15 -#ifndef CONF_EIC_EXTINTEO15 -#define CONF_EIC_EXTINTEO15 0 -#endif - -// <y> Input 15 Sense Configuration -// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection -// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection -// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection -// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection -// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection -// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection -// <i> This defines input sense trigger -// <id> eic_arch_sense15 -#ifndef CONF_EIC_SENSE15 -#define CONF_EIC_SENSE15 EIC_NMICTRL_NMISENSE_NONE_Val -#endif - -// <q> External Interrupt 15 Asynchronous Edge Detection Mode -// <i> Indicates the external interrupt 15 detection mode operated synchronously or asynchronousl -// <id> eic_arch_asynch15 -#ifndef CONF_EIC_ASYNCH15 -#define CONF_EIC_ASYNCH15 0 -#endif - -// </e> - -#define CONFIG_EIC_EXTINT_MAP {5, PIN_PB05}, {6, PIN_PA22}, {7, PIN_PA23}, - -// <<< end of configuration section >>> - -#endif // HPL_EIC_CONFIG_H |