diff options
Diffstat (limited to 'Sensor Watch Starter Project/config/hpl_eic_config.h')
-rw-r--r-- | Sensor Watch Starter Project/config/hpl_eic_config.h | 730 |
1 files changed, 730 insertions, 0 deletions
diff --git a/Sensor Watch Starter Project/config/hpl_eic_config.h b/Sensor Watch Starter Project/config/hpl_eic_config.h new file mode 100644 index 00000000..3b268a10 --- /dev/null +++ b/Sensor Watch Starter Project/config/hpl_eic_config.h @@ -0,0 +1,730 @@ +/* Auto-generated config file hpl_eic_config.h */ +#ifndef HPL_EIC_CONFIG_H +#define HPL_EIC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// <h> Basic Settings +// <o> Clock Selection +// <i> Indicates which clock used, The EIC can be clocked either by GCLK_EIC when higher frequency than 32KHz is required for filtering or +// <i> either by CLK_ULP32K when power consumption is the priority. +// <0x0=> Clocked by GCLK +// <0x1=> Clocked by ULPOSC32K +// <id> eic_arch_cksel +#ifndef CONF_EIC_CKSEL +#define CONF_EIC_CKSEL 0 +#endif + +// </h> + +// <e> Non-Maskable Interrupt Control +// <id> eic_arch_nmi_ctrl +#ifndef CONF_EIC_ENABLE_NMI_CTRL +#define CONF_EIC_ENABLE_NMI_CTRL 0 +#endif + +// <q> Non-Maskable Interrupt Filter Enable +// <i> Indicates whether the mon-maskable interrupt filter is enabled or not +// <id> eic_arch_nmifilten +#ifndef CONF_EIC_NMIFILTEN +#define CONF_EIC_NMIFILTEN 0 +#endif + +// <y> Non-Maskable Interrupt Sense +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines non-maskable interrupt sense +// <id> eic_arch_nmisense +#ifndef CONF_EIC_NMISENSE +#define CONF_EIC_NMISENSE EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> Asynchronous Edge Detection Mode +// <i> Indicates the interrupt detection mode operated synchronously or asynchronousl +// <id> eic_arch_nmiasynch +#ifndef CONF_EIC_NMIASYNCH +#define CONF_EIC_NMIASYNCH 0 +#endif +// </e> + +// <e> Interrupt 0 Settings +// <id> eic_arch_enable_irq_setting0 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING0 +#define CONF_EIC_ENABLE_IRQ_SETTING0 0 +#endif + +// <q> External Interrupt 0 Filter Enable +// <i> Indicates whether the external interrupt 0 filter is enabled or not +// <id> eic_arch_filten0 +#ifndef CONF_EIC_FILTEN0 +#define CONF_EIC_FILTEN0 0 +#endif + +// <q> External Interrupt 0 Event Output Enable +// <i> Indicates whether the external interrupt 0 event output is enabled or not +// <id> eic_arch_extinteo0 +#ifndef CONF_EIC_EXTINTEO0 +#define CONF_EIC_EXTINTEO0 0 +#endif + +// <y> Input 0 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense0 +#ifndef CONF_EIC_SENSE0 +#define CONF_EIC_SENSE0 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 0 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 0 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch0 +#ifndef CONF_EIC_ASYNCH0 +#define CONF_EIC_ASYNCH0 0 +#endif + +// </e> + +// <e> Interrupt 1 Settings +// <id> eic_arch_enable_irq_setting1 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING1 +#define CONF_EIC_ENABLE_IRQ_SETTING1 0 +#endif + +// <q> External Interrupt 1 Filter Enable +// <i> Indicates whether the external interrupt 1 filter is enabled or not +// <id> eic_arch_filten1 +#ifndef CONF_EIC_FILTEN1 +#define CONF_EIC_FILTEN1 0 +#endif + +// <q> External Interrupt 1 Event Output Enable +// <i> Indicates whether the external interrupt 1 event output is enabled or not +// <id> eic_arch_extinteo1 +#ifndef CONF_EIC_EXTINTEO1 +#define CONF_EIC_EXTINTEO1 0 +#endif + +// <y> Input 1 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense1 +#ifndef CONF_EIC_SENSE1 +#define CONF_EIC_SENSE1 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 1 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 1 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch1 +#ifndef CONF_EIC_ASYNCH1 +#define CONF_EIC_ASYNCH1 0 +#endif + +// </e> + +// <e> Interrupt 2 Settings +// <id> eic_arch_enable_irq_setting2 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING2 +#define CONF_EIC_ENABLE_IRQ_SETTING2 0 +#endif + +// <q> External Interrupt 2 Filter Enable +// <i> Indicates whether the external interrupt 2 filter is enabled or not +// <id> eic_arch_filten2 +#ifndef CONF_EIC_FILTEN2 +#define CONF_EIC_FILTEN2 0 +#endif + +// <q> External Interrupt 2 Event Output Enable +// <i> Indicates whether the external interrupt 2 event output is enabled or not +// <id> eic_arch_extinteo2 +#ifndef CONF_EIC_EXTINTEO2 +#define CONF_EIC_EXTINTEO2 0 +#endif + +// <y> Input 2 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense2 +#ifndef CONF_EIC_SENSE2 +#define CONF_EIC_SENSE2 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 2 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 2 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch2 +#ifndef CONF_EIC_ASYNCH2 +#define CONF_EIC_ASYNCH2 0 +#endif + +// </e> + +// <e> Interrupt 3 Settings +// <id> eic_arch_enable_irq_setting3 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING3 +#define CONF_EIC_ENABLE_IRQ_SETTING3 0 +#endif + +// <q> External Interrupt 3 Filter Enable +// <i> Indicates whether the external interrupt 3 filter is enabled or not +// <id> eic_arch_filten3 +#ifndef CONF_EIC_FILTEN3 +#define CONF_EIC_FILTEN3 0 +#endif + +// <q> External Interrupt 3 Event Output Enable +// <i> Indicates whether the external interrupt 3 event output is enabled or not +// <id> eic_arch_extinteo3 +#ifndef CONF_EIC_EXTINTEO3 +#define CONF_EIC_EXTINTEO3 0 +#endif + +// <y> Input 3 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense3 +#ifndef CONF_EIC_SENSE3 +#define CONF_EIC_SENSE3 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 3 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 3 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch3 +#ifndef CONF_EIC_ASYNCH3 +#define CONF_EIC_ASYNCH3 0 +#endif + +// </e> + +// <e> Interrupt 4 Settings +// <id> eic_arch_enable_irq_setting4 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING4 +#define CONF_EIC_ENABLE_IRQ_SETTING4 0 +#endif + +// <q> External Interrupt 4 Filter Enable +// <i> Indicates whether the external interrupt 4 filter is enabled or not +// <id> eic_arch_filten4 +#ifndef CONF_EIC_FILTEN4 +#define CONF_EIC_FILTEN4 0 +#endif + +// <q> External Interrupt 4 Event Output Enable +// <i> Indicates whether the external interrupt 4 event output is enabled or not +// <id> eic_arch_extinteo4 +#ifndef CONF_EIC_EXTINTEO4 +#define CONF_EIC_EXTINTEO4 0 +#endif + +// <y> Input 4 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense4 +#ifndef CONF_EIC_SENSE4 +#define CONF_EIC_SENSE4 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 4 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 4 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch4 +#ifndef CONF_EIC_ASYNCH4 +#define CONF_EIC_ASYNCH4 0 +#endif + +// </e> + +// <e> Interrupt 5 Settings +// <id> eic_arch_enable_irq_setting5 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING5 +#define CONF_EIC_ENABLE_IRQ_SETTING5 1 +#endif + +// <q> External Interrupt 5 Filter Enable +// <i> Indicates whether the external interrupt 5 filter is enabled or not +// <id> eic_arch_filten5 +#ifndef CONF_EIC_FILTEN5 +#define CONF_EIC_FILTEN5 0 +#endif + +// <q> External Interrupt 5 Event Output Enable +// <i> Indicates whether the external interrupt 5 event output is enabled or not +// <id> eic_arch_extinteo5 +#ifndef CONF_EIC_EXTINTEO5 +#define CONF_EIC_EXTINTEO5 0 +#endif + +// <y> Input 5 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense5 +#ifndef CONF_EIC_SENSE5 +#define CONF_EIC_SENSE5 EIC_NMICTRL_NMISENSE_RISE_Val +#endif + +// <q> External Interrupt 5 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 5 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch5 +#ifndef CONF_EIC_ASYNCH5 +#define CONF_EIC_ASYNCH5 0 +#endif + +// </e> + +// <e> Interrupt 6 Settings +// <id> eic_arch_enable_irq_setting6 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING6 +#define CONF_EIC_ENABLE_IRQ_SETTING6 1 +#endif + +// <q> External Interrupt 6 Filter Enable +// <i> Indicates whether the external interrupt 6 filter is enabled or not +// <id> eic_arch_filten6 +#ifndef CONF_EIC_FILTEN6 +#define CONF_EIC_FILTEN6 0 +#endif + +// <q> External Interrupt 6 Event Output Enable +// <i> Indicates whether the external interrupt 6 event output is enabled or not +// <id> eic_arch_extinteo6 +#ifndef CONF_EIC_EXTINTEO6 +#define CONF_EIC_EXTINTEO6 0 +#endif + +// <y> Input 6 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense6 +#ifndef CONF_EIC_SENSE6 +#define CONF_EIC_SENSE6 EIC_NMICTRL_NMISENSE_RISE_Val +#endif + +// <q> External Interrupt 6 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 6 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch6 +#ifndef CONF_EIC_ASYNCH6 +#define CONF_EIC_ASYNCH6 0 +#endif + +// </e> + +// <e> Interrupt 7 Settings +// <id> eic_arch_enable_irq_setting7 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING7 +#define CONF_EIC_ENABLE_IRQ_SETTING7 1 +#endif + +// <q> External Interrupt 7 Filter Enable +// <i> Indicates whether the external interrupt 7 filter is enabled or not +// <id> eic_arch_filten7 +#ifndef CONF_EIC_FILTEN7 +#define CONF_EIC_FILTEN7 0 +#endif + +// <q> External Interrupt 7 Event Output Enable +// <i> Indicates whether the external interrupt 7 event output is enabled or not +// <id> eic_arch_extinteo7 +#ifndef CONF_EIC_EXTINTEO7 +#define CONF_EIC_EXTINTEO7 0 +#endif + +// <y> Input 7 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense7 +#ifndef CONF_EIC_SENSE7 +#define CONF_EIC_SENSE7 EIC_NMICTRL_NMISENSE_RISE_Val +#endif + +// <q> External Interrupt 7 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 7 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch7 +#ifndef CONF_EIC_ASYNCH7 +#define CONF_EIC_ASYNCH7 0 +#endif + +// </e> + +// <e> Interrupt 8 Settings +// <id> eic_arch_enable_irq_setting8 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING8 +#define CONF_EIC_ENABLE_IRQ_SETTING8 0 +#endif + +// <q> External Interrupt 8 Filter Enable +// <i> Indicates whether the external interrupt 8 filter is enabled or not +// <id> eic_arch_filten8 +#ifndef CONF_EIC_FILTEN8 +#define CONF_EIC_FILTEN8 0 +#endif + +// <q> External Interrupt 8 Event Output Enable +// <i> Indicates whether the external interrupt 8 event output is enabled or not +// <id> eic_arch_extinteo8 +#ifndef CONF_EIC_EXTINTEO8 +#define CONF_EIC_EXTINTEO8 0 +#endif + +// <y> Input 8 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense8 +#ifndef CONF_EIC_SENSE8 +#define CONF_EIC_SENSE8 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 8 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 8 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch8 +#ifndef CONF_EIC_ASYNCH8 +#define CONF_EIC_ASYNCH8 0 +#endif + +// </e> + +// <e> Interrupt 9 Settings +// <id> eic_arch_enable_irq_setting9 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING9 +#define CONF_EIC_ENABLE_IRQ_SETTING9 0 +#endif + +// <q> External Interrupt 9 Filter Enable +// <i> Indicates whether the external interrupt 9 filter is enabled or not +// <id> eic_arch_filten9 +#ifndef CONF_EIC_FILTEN9 +#define CONF_EIC_FILTEN9 0 +#endif + +// <q> External Interrupt 9 Event Output Enable +// <i> Indicates whether the external interrupt 9 event output is enabled or not +// <id> eic_arch_extinteo9 +#ifndef CONF_EIC_EXTINTEO9 +#define CONF_EIC_EXTINTEO9 0 +#endif + +// <y> Input 9 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense9 +#ifndef CONF_EIC_SENSE9 +#define CONF_EIC_SENSE9 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 9 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 9 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch9 +#ifndef CONF_EIC_ASYNCH9 +#define CONF_EIC_ASYNCH9 0 +#endif + +// </e> + +// <e> Interrupt 10 Settings +// <id> eic_arch_enable_irq_setting10 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING10 +#define CONF_EIC_ENABLE_IRQ_SETTING10 0 +#endif + +// <q> External Interrupt 10 Filter Enable +// <i> Indicates whether the external interrupt 10 filter is enabled or not +// <id> eic_arch_filten10 +#ifndef CONF_EIC_FILTEN10 +#define CONF_EIC_FILTEN10 0 +#endif + +// <q> External Interrupt 10 Event Output Enable +// <i> Indicates whether the external interrupt 10 event output is enabled or not +// <id> eic_arch_extinteo10 +#ifndef CONF_EIC_EXTINTEO10 +#define CONF_EIC_EXTINTEO10 0 +#endif + +// <y> Input 10 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense10 +#ifndef CONF_EIC_SENSE10 +#define CONF_EIC_SENSE10 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 10 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 10 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch10 +#ifndef CONF_EIC_ASYNCH10 +#define CONF_EIC_ASYNCH10 0 +#endif + +// </e> + +// <e> Interrupt 11 Settings +// <id> eic_arch_enable_irq_setting11 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING11 +#define CONF_EIC_ENABLE_IRQ_SETTING11 0 +#endif + +// <q> External Interrupt 11 Filter Enable +// <i> Indicates whether the external interrupt 11 filter is enabled or not +// <id> eic_arch_filten11 +#ifndef CONF_EIC_FILTEN11 +#define CONF_EIC_FILTEN11 0 +#endif + +// <q> External Interrupt 11 Event Output Enable +// <i> Indicates whether the external interrupt 11 event output is enabled or not +// <id> eic_arch_extinteo11 +#ifndef CONF_EIC_EXTINTEO11 +#define CONF_EIC_EXTINTEO11 0 +#endif + +// <y> Input 11 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense11 +#ifndef CONF_EIC_SENSE11 +#define CONF_EIC_SENSE11 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 11 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 11 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch11 +#ifndef CONF_EIC_ASYNCH11 +#define CONF_EIC_ASYNCH11 0 +#endif + +// </e> + +// <e> Interrupt 12 Settings +// <id> eic_arch_enable_irq_setting12 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING12 +#define CONF_EIC_ENABLE_IRQ_SETTING12 0 +#endif + +// <q> External Interrupt 12 Filter Enable +// <i> Indicates whether the external interrupt 12 filter is enabled or not +// <id> eic_arch_filten12 +#ifndef CONF_EIC_FILTEN12 +#define CONF_EIC_FILTEN12 0 +#endif + +// <q> External Interrupt 12 Event Output Enable +// <i> Indicates whether the external interrupt 12 event output is enabled or not +// <id> eic_arch_extinteo12 +#ifndef CONF_EIC_EXTINTEO12 +#define CONF_EIC_EXTINTEO12 0 +#endif + +// <y> Input 12 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense12 +#ifndef CONF_EIC_SENSE12 +#define CONF_EIC_SENSE12 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 12 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 12 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch12 +#ifndef CONF_EIC_ASYNCH12 +#define CONF_EIC_ASYNCH12 0 +#endif + +// </e> + +// <e> Interrupt 13 Settings +// <id> eic_arch_enable_irq_setting13 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING13 +#define CONF_EIC_ENABLE_IRQ_SETTING13 0 +#endif + +// <q> External Interrupt 13 Filter Enable +// <i> Indicates whether the external interrupt 13 filter is enabled or not +// <id> eic_arch_filten13 +#ifndef CONF_EIC_FILTEN13 +#define CONF_EIC_FILTEN13 0 +#endif + +// <q> External Interrupt 13 Event Output Enable +// <i> Indicates whether the external interrupt 13 event output is enabled or not +// <id> eic_arch_extinteo13 +#ifndef CONF_EIC_EXTINTEO13 +#define CONF_EIC_EXTINTEO13 0 +#endif + +// <y> Input 13 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense13 +#ifndef CONF_EIC_SENSE13 +#define CONF_EIC_SENSE13 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 13 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 13 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch13 +#ifndef CONF_EIC_ASYNCH13 +#define CONF_EIC_ASYNCH13 0 +#endif + +// </e> + +// <e> Interrupt 14 Settings +// <id> eic_arch_enable_irq_setting14 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING14 +#define CONF_EIC_ENABLE_IRQ_SETTING14 0 +#endif + +// <q> External Interrupt 14 Filter Enable +// <i> Indicates whether the external interrupt 14 filter is enabled or not +// <id> eic_arch_filten14 +#ifndef CONF_EIC_FILTEN14 +#define CONF_EIC_FILTEN14 0 +#endif + +// <q> External Interrupt 14 Event Output Enable +// <i> Indicates whether the external interrupt 14 event output is enabled or not +// <id> eic_arch_extinteo14 +#ifndef CONF_EIC_EXTINTEO14 +#define CONF_EIC_EXTINTEO14 0 +#endif + +// <y> Input 14 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense14 +#ifndef CONF_EIC_SENSE14 +#define CONF_EIC_SENSE14 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 14 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 14 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch14 +#ifndef CONF_EIC_ASYNCH14 +#define CONF_EIC_ASYNCH14 0 +#endif + +// </e> + +// <e> Interrupt 15 Settings +// <id> eic_arch_enable_irq_setting15 +#ifndef CONF_EIC_ENABLE_IRQ_SETTING15 +#define CONF_EIC_ENABLE_IRQ_SETTING15 0 +#endif + +// <q> External Interrupt 15 Filter Enable +// <i> Indicates whether the external interrupt 15 filter is enabled or not +// <id> eic_arch_filten15 +#ifndef CONF_EIC_FILTEN15 +#define CONF_EIC_FILTEN15 0 +#endif + +// <q> External Interrupt 15 Event Output Enable +// <i> Indicates whether the external interrupt 15 event output is enabled or not +// <id> eic_arch_extinteo15 +#ifndef CONF_EIC_EXTINTEO15 +#define CONF_EIC_EXTINTEO15 0 +#endif + +// <y> Input 15 Sense Configuration +// <EIC_NMICTRL_NMISENSE_NONE_Val"> No detection +// <EIC_NMICTRL_NMISENSE_RISE_Val"> Rising-edge detection +// <EIC_NMICTRL_NMISENSE_FALL_Val"> Falling-edge detection +// <EIC_NMICTRL_NMISENSE_BOTH_Val"> Both-edges detection +// <EIC_NMICTRL_NMISENSE_HIGH_Val"> High-level detection +// <EIC_NMICTRL_NMISENSE_LOW_Val"> Low-level detection +// <i> This defines input sense trigger +// <id> eic_arch_sense15 +#ifndef CONF_EIC_SENSE15 +#define CONF_EIC_SENSE15 EIC_NMICTRL_NMISENSE_NONE_Val +#endif + +// <q> External Interrupt 15 Asynchronous Edge Detection Mode +// <i> Indicates the external interrupt 15 detection mode operated synchronously or asynchronousl +// <id> eic_arch_asynch15 +#ifndef CONF_EIC_ASYNCH15 +#define CONF_EIC_ASYNCH15 0 +#endif + +// </e> + +#define CONFIG_EIC_EXTINT_MAP {5, PIN_PB05}, {6, PIN_PA22}, {7, PIN_PA23}, + +// <<< end of configuration section >>> + +#endif // HPL_EIC_CONFIG_H |