diff options
Diffstat (limited to 'Sensor Watch Starter Project/config/hpl_osc32kctrl_config.h')
-rw-r--r-- | Sensor Watch Starter Project/config/hpl_osc32kctrl_config.h | 173 |
1 files changed, 173 insertions, 0 deletions
diff --git a/Sensor Watch Starter Project/config/hpl_osc32kctrl_config.h b/Sensor Watch Starter Project/config/hpl_osc32kctrl_config.h new file mode 100644 index 00000000..94b46617 --- /dev/null +++ b/Sensor Watch Starter Project/config/hpl_osc32kctrl_config.h @@ -0,0 +1,173 @@ +/* Auto-generated config file hpl_osc32kctrl_config.h */ +#ifndef HPL_OSC32KCTRL_CONFIG_H +#define HPL_OSC32KCTRL_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// <e> RTC Source configuration +// <id> enable_rtc_source +#ifndef CONF_RTCCTRL_CONFIG +#define CONF_RTCCTRL_CONFIG 0 +#endif + +// <h> RTC source control +// <y> RTC Clock Source Selection +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <i> This defines the clock source for RTC +// <id> rtc_source_oscillator +#ifndef CONF_RTCCTRL_SRC +#define CONF_RTCCTRL_SRC GCLK_GENCTRL_SRC_XOSC32K +#endif + +// <q> Use 1 kHz output +// <id> rtc_1khz_selection +#ifndef CONF_RTCCTRL_1KHZ + +#define CONF_RTCCTRL_1KHZ 1 + +#endif + +#if CONF_RTCCTRL_SRC == GCLK_GENCTRL_SRC_OSCULP32K +#define CONF_RTCCTRL (CONF_RTCCTRL_1KHZ ? OSC32KCTRL_RTCCTRL_RTCSEL_ULP1K_Val : OSC32KCTRL_RTCCTRL_RTCSEL_ULP32K_Val) +#elif CONF_RTCCTRL_SRC == GCLK_GENCTRL_SRC_XOSC32K +#define CONF_RTCCTRL (CONF_RTCCTRL_1KHZ ? OSC32KCTRL_RTCCTRL_RTCSEL_XOSC1K_Val : OSC32KCTRL_RTCCTRL_RTCSEL_XOSC32K_Val) +#else +#error unexpected CONF_RTCCTRL_SRC +#endif + +// </h> +// </e> +// <e> SLCD Source configuration +// <id> enable_slcd_source +#ifndef CONF_SLCDCTRL_CONFIG +#define CONF_SLCDCTRL_CONFIG 0 +#endif + +// <h> SLCD source control +// <y> SLCD Clock Source Selection +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <i> This defines the clock source for SLCD +// <id> slcd_source_oscillator +#ifndef CONF_SLCDCTRL_SRC +#define CONF_SLCDCTRL_SRC GCLK_GENCTRL_SRC_XOSC32K +#endif + +// </h> +// </e> +// <e> 32kHz External Crystal Oscillator Configuration +// <i> Indicates whether configuration for External 32K Osc is enabled or not +// <id> enable_xosc32k +#ifndef CONF_XOSC32K_CONFIG +#define CONF_XOSC32K_CONFIG 1 +#endif + +// <h> 32kHz External Crystal Oscillator Control +// <q> Oscillator enable +// <i> Indicates whether 32kHz External Crystal Oscillator is enabled or not +// <id> xosc32k_arch_enable +#ifndef CONF_XOSC32K_ENABLE +#define CONF_XOSC32K_ENABLE 1 +#endif + +// <o> Start-Up Time +// <0x0=>62592us +// <0x1=>125092us +// <0x2=>500092us +// <0x3=>1000092us +// <0x4=>2000092us +// <0x5=>4000092us +// <0x6=>8000092us +// <id> xosc32k_arch_startup +#ifndef CONF_XOSC32K_STARTUP +#define CONF_XOSC32K_STARTUP 0x3 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> xosc32k_arch_ondemand +#ifndef CONF_XOSC32K_ONDEMAND +#define CONF_XOSC32K_ONDEMAND 0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> xosc32k_arch_runstdby +#ifndef CONF_XOSC32K_RUNSTDBY +#define CONF_XOSC32K_RUNSTDBY 1 +#endif + +// <q> 1kHz Output Enable +// <i> Indicates whether 1kHz Output is enabled or not +// <id> xosc32k_arch_en1k +#ifndef CONF_XOSC32K_EN1K +#define CONF_XOSC32K_EN1K 1 +#endif + +// <q> 32kHz Output Enable +// <i> Indicates whether 32kHz Output is enabled or not +// <id> xosc32k_arch_en32k +#ifndef CONF_XOSC32K_EN32K +#define CONF_XOSC32K_EN32K 1 +#endif + +// <q> Clock Switch Back +// <i> Indicates whether Clock Switch Back is enabled or not +// <id> xosc32k_arch_swben +#ifndef CONF_XOSC32K_SWBEN +#define CONF_XOSC32K_SWBEN 0 +#endif + +// <q> Clock Failure Detector +// <i> Indicates whether Clock Failure Detector is enabled or not +// <id> xosc32k_arch_cfden +#ifndef CONF_XOSC32K_CFDEN +#define CONF_XOSC32K_CFDEN 0 +#endif + +// <q> Clock Failure Detector Event Out +// <i> Indicates whether Clock Failure Detector Event Out is enabled or not +// <id> xosc32k_arch_cfdeo +#ifndef CONF_XOSC32K_CFDEO +#define CONF_XOSC32K_CFDEO 0 +#endif + +// <q> Crystal connected to XIN32/XOUT32 Enable +// <i> Indicates whether the connections between the I/O pads and the external clock or crystal oscillator is enabled or not +// <id> xosc32k_arch_xtalen +#ifndef CONF_XOSC32K_XTALEN +#define CONF_XOSC32K_XTALEN 1 +#endif + +// </h> +// </e> + +// <e> 32kHz Ultra Low Power Internal Oscillator Configuration +// <i> Indicates whether configuration for OSCULP32K is enabled or not +// <id> enable_osculp32k +#ifndef CONF_OSCULP32K_CONFIG +#define CONF_OSCULP32K_CONFIG 1 +#endif + +// <h> 32kHz Ultra Low Power Internal Oscillator Control + +// <q> Oscillator Calibration Control +// <i> Indicates whether Oscillator Calibration is enabled or not +// <id> osculp32k_calib_enable +#ifndef CONF_OSCULP32K_CALIB_ENABLE +#define CONF_OSCULP32K_CALIB_ENABLE 0 +#endif + +// <o> Oscillator Calibration <0x0-0x1F> +// <id> osculp32k_calib +#ifndef CONF_OSCULP32K_CALIB +#define CONF_OSCULP32K_CALIB 0x0 +#endif + +// </h> +// </e> + +// <<< end of configuration section >>> + +#endif // HPL_OSC32KCTRL_CONFIG_H |