diff options
Diffstat (limited to 'Sensor Watch Starter Project/config/hpl_oscctrl_config.h')
-rw-r--r-- | Sensor Watch Starter Project/config/hpl_oscctrl_config.h | 483 |
1 files changed, 483 insertions, 0 deletions
diff --git a/Sensor Watch Starter Project/config/hpl_oscctrl_config.h b/Sensor Watch Starter Project/config/hpl_oscctrl_config.h new file mode 100644 index 00000000..ba2d42e6 --- /dev/null +++ b/Sensor Watch Starter Project/config/hpl_oscctrl_config.h @@ -0,0 +1,483 @@ +/* Auto-generated config file hpl_oscctrl_config.h */ +#ifndef HPL_OSCCTRL_CONFIG_H +#define HPL_OSCCTRL_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// <e> External Multipurpose Crystal Oscillator Configuration +// <i> Indicates whether configuration for XOSC is enabled or not +// <id> enable_xosc +#ifndef CONF_XOSC_CONFIG +#define CONF_XOSC_CONFIG 0 +#endif + +// <o> Frequency <400000-32000000> +// <i> Oscillation frequency of the resonator connected to the External Multipurpose Crystal Oscillator. +// <id> xosc_frequency +#ifndef CONF_XOSC_FREQUENCY +#define CONF_XOSC_FREQUENCY 400000 +#endif + +// <h> External Multipurpose Crystal Oscillator Control +// <q> Oscillator enable +// <i> Indicates whether External Multipurpose Crystal Oscillator is enabled or not +// <id> xosc_arch_enable +#ifndef CONF_XOSC_ENABLE +#define CONF_XOSC_ENABLE 0 +#endif + +// <o> Start-Up Time +// <0x0=>31us +// <0x1=>61us +// <0x2=>122us +// <0x3=>244us +// <0x4=>488us +// <0x5=>977us +// <0x6=>1953us +// <0x7=>3906us +// <0x8=>7813us +// <0x9=>15625us +// <0xA=>31250us +// <0xB=>62500us +// <0xC=>125000us +// <0xD=>250000us +// <0xE=>500000us +// <0xF=>1000000us +// <id> xosc_arch_startup +#ifndef CONF_XOSC_STARTUP +#define CONF_XOSC_STARTUP 0x0 +#endif + +// <q> Automatic Amplitude Gain Control +// <i> Indicates whether Automatic Amplitude Gain Control is enabled or not +// <id> xosc_arch_ampgc +#ifndef CONF_XOSC_AMPGC +#define CONF_XOSC_AMPGC 0 +#endif + +// <o> External Multipurpose Crystal Oscillator Gain +// <0x0=>2MHz +// <0x1=>4MHz +// <0x2=>8MHz +// <0x3=>16MHz +// <0x4=>30MHz +// <id> xosc_arch_gain +#ifndef CONF_XOSC_GAIN +#define CONF_XOSC_GAIN 0x0 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> xosc_arch_ondemand +#ifndef CONF_XOSC_ONDEMAND +#define CONF_XOSC_ONDEMAND 1 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> xosc_arch_runstdby +#ifndef CONF_XOSC_RUNSTDBY +#define CONF_XOSC_RUNSTDBY 0 +#endif + +// <q> Clock Switch Back +// <i> Indicates whether Clock Switch Back is enabled or not +// <id> xosc_arch_swben +#ifndef CONF_XOSC_SWBEN +#define CONF_XOSC_SWBEN 0 +#endif + +// <q> Clock Failure Detector +// <i> Indicates whether Clock Failure Detector is enabled or not +// <id> xosc_arch_cfden +#ifndef CONF_XOSC_CFDEN +#define CONF_XOSC_CFDEN 0 +#endif + +// <q> Clock Failure Detector Event Out +// <i> Indicates whether Clock Failure Detector Event Out is enabled or not +// <id> xosc_arch_cfdeo +#ifndef CONF_XOSC_CFDEO +#define CONF_XOSC_CFDEO 0 +#endif + +// <q> Crystal connected to XIN/XOUT Enable +// <i> Indicates whether the connections between the I/O pads and the external clock or crystal oscillator is enabled or not +// <id> xosc_arch_xtalen +#ifndef CONF_XOSC_XTALEN +#define CONF_XOSC_XTALEN 0 +#endif +//</h> +//</e> + +// <e> 16MHz Internal Oscillator Configuration +// <i> Indicates whether configuration for OSC8M is enabled or not +// <id> enable_osc16m +#ifndef CONF_OSC16M_CONFIG +#define CONF_OSC16M_CONFIG 1 +#endif + +// <h> 16MHz Internal Oscillator Control +// <q> Enable +// <i> Indicates whether 16MHz Internal Oscillator is enabled or not +// <id> osc16m_arch_enable +#ifndef CONF_OSC16M_ENABLE +#define CONF_OSC16M_ENABLE 1 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> osc16m_arch_ondemand +#ifndef CONF_OSC16M_ONDEMAND +#define CONF_OSC16M_ONDEMAND 1 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> osc16m_arch_runstdby +#ifndef CONF_OSC16M_RUNSTDBY +#define CONF_OSC16M_RUNSTDBY 0 +#endif + +// <y> Oscillator Frequency Selection(Mhz) +// <OSCCTRL_OSC16MCTRL_FSEL_4_Val"> 4 +// <OSCCTRL_OSC16MCTRL_FSEL_8_Val"> 8 +// <OSCCTRL_OSC16MCTRL_FSEL_12_Val"> 12 +// <OSCCTRL_OSC16MCTRL_FSEL_16_Val"> 16 +// <i> This defines the oscillator frequency (Mhz) +// <id> osc16m_freq +#ifndef CONF_OSC16M_FSEL +#define CONF_OSC16M_FSEL OSCCTRL_OSC16MCTRL_FSEL_4_Val +#endif + +// <q> Oscillator Calibration Control +// <i> Indicates whether Oscillator Calibration is enabled or not +// <id> osc16m_arch_calib_enable +#ifndef CONF_OSC16M_CALIB_ENABLE +#define CONF_OSC16M_CALIB_ENABLE 0 +#endif + +// <o> 4MHz Frequency Calibration <0x0-0x3F> +// <id> osc16m_arch_4m_fcal +#ifndef CONF_OSC16M_FCAL +#define CONF_OSC16M_4M_FCAL 0 +#endif + +// <o> 4MHz Temperature Calibration <0x0-0x3F> +// <id> osc16m_arch_4m_tcal +#ifndef CONF_OSC16M_TCAL +#define CONF_OSC16M_4M_TCAL 0 +#endif + +// <o> 8MHz Frequency Calibration <0x0-0x3F> +// <id> osc16m_arch_8m_fcal +#ifndef CONF_OSC16M_FCAL +#define CONF_OSC16M_8M_FCAL 0 +#endif + +// <o> 8MHz Temperature Calibration <0x0-0x3F> +// <id> osc16m_arch_8m_tcal +#ifndef CONF_OSC16M_TCAL +#define CONF_OSC16M_8M_TCAL 0 +#endif + +// <o> 12MHz Frequency Calibration <0x0-0x3F> +// <id> osc16m_arch_12m_fcal +#ifndef CONF_OSC16M_FCAL +#define CONF_OSC16M_12M_FCAL 0 +#endif + +// <o> 12MHz Temperature Calibration <0x0-0x3F> +// <id> osc16m_arch_12m_tcal +#ifndef CONF_OSC16M_TCAL +#define CONF_OSC16M_12M_TCAL 0 +#endif + +// <o> 16MHz Frequency Calibration <0x0-0x3F> +// <id> osc16m_arch_fcal +#ifndef CONF_OSC16M_FCAL +#define CONF_OSC16M_16M_FCAL 0 +#endif + +// <o> 16MHz Temperature Calibration <0x0-0x3F> +// <id> osc16m_arch_16m_tcal +#ifndef CONF_OSC16M_TCAL +#define CONF_OSC16M_16M_TCAL 0 +#endif +//</h> +//</e> + +// <e> DFLL Configuration +// <i> Indicates whether configuration for DFLL is enabled or not +// <id> enable_dfll48m +#ifndef CONF_DFLL_CONFIG +#define CONF_DFLL_CONFIG 0 +#endif + +// <y> Reference Clock Source +// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0 +// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1 +// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2 +// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3 +// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4 +// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5 +// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6 +// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7 +// <i> Select the clock source. +// <id> dfll48m_ref_clock +#ifndef CONF_DFLL_GCLK +#define CONF_DFLL_GCLK GCLK_PCHCTRL_GEN_GCLK3_Val +#endif + +// <h> Digital Frequency Locked Loop Control +// <q> DFLL Enable +// <i> Indicates whether DFLL is enabled or not +// <id> dfll48m_arch_enable +#ifndef CONF_DFLL_ENABLE +#define CONF_DFLL_ENABLE 0 +#endif + +// <q> Wait Lock +// <i> Indicates whether Wait Lock is enabled or not +// <id> dfll_arch_waitlock +#ifndef CONF_DFLL_WAITLOCK +#define CONF_DFLL_WAITLOCK 0 +#endif + +// <q> Bypass Coarse Lock +// <i> Indicates whether Bypass Coarse Lock is enabled or not +// <id> dfll_arch_bplckc +#ifndef CONF_DFLL_BPLCKC +#define CONF_DFLL_BPLCKC 0 +#endif + +// <q> Quick Lock Disable +// <i> Indicates whether Quick Lock Disable is enabled or not +// <id> dfll_arch_qldis +#ifndef CONF_DFLL_QLDIS +#define CONF_DFLL_QLDIS 0 +#endif + +// <q> Chill Cycle Disable +// <i> Indicates whether Chill Cycle Disable is enabled or not +// <id> dfll_arch_ccdis +#ifndef CONF_DFLL_CCDIS +#define CONF_DFLL_CCDIS 0 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> dfll_arch_ondemand +#ifndef CONF_DFLL_ONDEMAND +#define CONF_DFLL_ONDEMAND 1 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> dfll_arch_runstdby +#ifndef CONF_DFLL_RUNSTDBY +#define CONF_DFLL_RUNSTDBY 0 +#endif + +// <q> USB Clock Recovery Mode +// <i> Indicates whether USB Clock Recovery Mode is enabled or not +// <id> dfll_arch_usbcrm +#ifndef CONF_DFLL_USBCRM +#define CONF_DFLL_USBCRM 0 +#endif + +// <q> Lose Lock After Wake +// <i> Indicates whether Lose Lock After Wake is enabled or not +// <id> dfll_arch_llaw +#ifndef CONF_DFLL_LLAW +#define CONF_DFLL_LLAW 0 +#endif + +// <q> Stable DFLL Frequency +// <i> Indicates whether Stable DFLL Frequency is enabled or not +// <id> dfll_arch_stable +#ifndef CONF_DFLL_STABLE +#define CONF_DFLL_STABLE 0 +#endif + +// <o> Operating Mode Selection +// <0=>Open Loop Mode +// <1=>Closed Loop Mode +// <id> dfll48m_mode +#ifndef CONF_DFLL_MODE +#define CONF_DFLL_MODE 0 +#endif + +// <o> Coarse Maximum Step <0x0-0x1F> +// <id> dfll_arch_cstep +#ifndef CONF_DFLL_CSTEP +#define CONF_DFLL_CSTEP 1 +#endif + +// <o> Fine Maximum Step <0x0-0x3FF> +// <id> dfll_arch_fstep +#ifndef CONF_DFLL_FSTEP +#define CONF_DFLL_FSTEP 1 +#endif + +// <o> DFLL Multiply Factor <0x0-0xFFFF> +// <id> dfll48m_mul +#ifndef CONF_DFLL_MUL +#define CONF_DFLL_MUL 0 +#endif + +// <e> DFLL Calibration Overwrite +// <i> Indicates whether Overwrite Calibration value of DFLL +// <id> dfll_arch_calibration +#ifndef CONF_DFLL_OVERWRITE_CALIBRATION +#define CONF_DFLL_OVERWRITE_CALIBRATION 0 +#endif + +// <o> Coarse Value <0x0-0x3F> +// <id> dfll_arch_coarse +#ifndef CONF_DFLL_COARSE +#define CONF_DFLL_COARSE (0x1f / 4) +#endif + +// <o> Fine Value <0x0-0x3FF> +// <id> dfll_arch_fine +#ifndef CONF_DFLL_FINE +#define CONF_DFLL_FINE (0x200) +#endif + +//</e> + +//</h> + +//</e> + +// <e> DPLL Configuration +// <i> Indicates whether configuration for DPLL is enabled or not +// <id> enable_fdpll96m +#ifndef CONF_DPLL_CONFIG +#define CONF_DPLL_CONFIG 0 +#endif + +// <y> Reference Clock Source +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_XOSC"> External Crystal Oscillator 0.4-32MHz (XOSC) +// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0 +// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1 +// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2 +// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3 +// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4 +// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5 +// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6 +// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7 +// <i> Select the clock source. +// <id> fdpll96m_ref_clock +#ifndef CONF_DPLL_GCLK +#define CONF_DPLL_GCLK GCLK_GENCTRL_SRC_XOSC32K + +#endif + +// <h> Digital Phase Locked Loop Control +// <q> Enable +// <i> Indicates whether Digital Phase Locked Loop is enabled or not +// <id> fdpll96m_arch_enable +#ifndef CONF_DPLL_ENABLE +#define CONF_DPLL_ENABLE 0 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> fdpll96m_arch_ondemand +#ifndef CONF_DPLL_ONDEMAND +#define CONF_DPLL_ONDEMAND 1 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> fdpll96m_arch_runstdby +#ifndef CONF_DPLL_RUNSTDBY +#define CONF_DPLL_RUNSTDBY 0 +#endif + +// <o> Loop Divider Ratio Fractional Part <0x0-0xF> +// <id> fdpll96m_ldrfrac +#ifndef CONF_DPLL_LDRFRAC +#define CONF_DPLL_LDRFRAC 0xd +#endif + +// <o> Loop Divider Ratio Integer Part <0x0-0xFFF> +// <id> fdpll96m_ldr +#ifndef CONF_DPLL_LDR +#define CONF_DPLL_LDR 0x5b7 +#endif + +// <o> Clock Divider <0x0-0x3FF> +// <id> fdpll96m_clock_div +#ifndef CONF_DPLL_DIV +#define CONF_DPLL_DIV 0 +#endif + +// <q> Lock Bypass +// <i> Indicates whether Lock Bypass is enabled or not +// <id> fdpll96m_arch_lbypass +#ifndef CONF_DPLL_LBYPASS +#define CONF_DPLL_LBYPASS 0 +#endif + +// <o> Lock Time +// <0=>No time-out, automatic lock +// <4=>The Time-out if no lock within 8 ms +// <5=>The Time-out if no lock within 9 ms +// <6=>The Time-out if no lock within 10 ms +// <7=>The Time-out if no lock within 11 ms +// <id> fdpll96m_arch_ltime +#ifndef CONF_DPLL_LTIME +#define CONF_DPLL_LTIME 0 +#endif + +// <o> Reference Clock Selection +// <0=>XOSC32K clock reference +// <1=>XOSC clock reference +// <2=>GCLK clock reference +// <id> fdpll96m_arch_refclk +#ifndef CONF_DPLL_REFCLK +#define CONF_DPLL_REFCLK 0 +#endif + +// <q> Wake Up Fast +// <i> Indicates whether Wake Up Fast is enabled or not +// <id> fdpll96m_arch_wuf +#ifndef CONF_DPLL_WUF +#define CONF_DPLL_WUF 0 +#endif + +// <q> Low-Power Enable +// <i> Indicates whether Low-Power Enable is enabled or not +// <id> fdpll96m_arch_lpen +#ifndef CONF_DPLL_LPEN +#define CONF_DPLL_LPEN 0 +#endif + +// <o> Reference Clock Selection +// <0=>Default filter mode +// <1=>Low bandwidth filter +// <2=>High bandwidth filter +// <3=>High damping filter +// <id> fdpll96m_arch_filter +#ifndef CONF_DPLL_FILTER +#define CONF_DPLL_FILTER 0 +#endif + +// <y> Output Clock Prescaler +// <OSCCTRL_DPLLPRESC_PRESC_DIV1_Val"> 1 +// <OSCCTRL_DPLLPRESC_PRESC_DIV2_Val"> 2 +// <OSCCTRL_DPLLPRESC_PRESC_DIV4_Val"> 4 +// <id> fdpll96m_presc +#ifndef CONF_DPLL_PRESC +#define CONF_DPLL_PRESC OSCCTRL_DPLLPRESC_PRESC_DIV1_Val +#endif +//</h> +//</e> + +// <<< end of configuration section >>> + +#endif // HPL_OSCCTRL_CONFIG_H |