diff options
Diffstat (limited to 'Sensor Watch Starter Project/hal/include/hpl_adc_dma.h')
-rw-r--r-- | Sensor Watch Starter Project/hal/include/hpl_adc_dma.h | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/Sensor Watch Starter Project/hal/include/hpl_adc_dma.h b/Sensor Watch Starter Project/hal/include/hpl_adc_dma.h new file mode 100644 index 00000000..bb3a0541 --- /dev/null +++ b/Sensor Watch Starter Project/hal/include/hpl_adc_dma.h @@ -0,0 +1,243 @@ +/** + * \file + * + * \brief ADC related functionality declaration. + * + * Copyright (c) 2016-2018 Microchip Technology Inc. and its subsidiaries. + * + * \asf_license_start + * + * \page License + * + * Subject to your compliance with these terms, you may use Microchip + * software and any derivatives exclusively with Microchip products. + * It is your responsibility to comply with third party license terms applicable + * to your use of third party software (including open source software) that + * may accompany Microchip software. + * + * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, + * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, + * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, + * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE + * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL + * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE + * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE + * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT + * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY + * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY, + * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE. + * + * \asf_license_stop + * + */ + +#ifndef _HPL_ADC_DMA_H_INCLUDED +#define _HPL_ADC_DMA_H_INCLUDED + +/** + * \addtogroup HPL ADC + * + * \section hpl_dma_adc_rev Revision History + * - v1.0.0 Initial Release + * + *@{ + */ + +#include <hpl_adc_sync.h> +#include <hpl_irq.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief ADC device structure + * + * The ADC device structure forward declaration. + */ +struct _adc_dma_device; + +/** + * \brief ADC callback types + */ +enum _adc_dma_callback_type { ADC_DMA_DEVICE_COMPLETE_CB, ADC_DMA_DEVICE_ERROR_CB }; + +/** + * \brief ADC interrupt callbacks + */ +struct _adc_dma_callbacks { + void (*complete)(struct _adc_dma_device *device, const uint16_t data); + void (*error)(struct _adc_dma_device *device); +}; + +/** + * \brief ADC descriptor device structure + */ +struct _adc_dma_device { + struct _adc_dma_callbacks adc_dma_cb; + struct _irq_descriptor irq; + void * hw; +}; + +/** + * \name HPL functions + */ +//@{ +/** + * \brief Initialize synchronous ADC + * + * This function does low level ADC configuration. + * + * param[in] device The pointer to ADC device instance + * param[in] hw The pointer to hardware instance + * + * \return Initialization status + */ +int32_t _adc_dma_init(struct _adc_dma_device *const device, void *const hw); + +/** + * \brief Deinitialize ADC + * + * \param[in] device The pointer to ADC device instance + */ +void _adc_dma_deinit(struct _adc_dma_device *const device); + +/** + * \brief Enable ADC peripheral + * + * \param[in] device The pointer to ADC device instance + * \param[in] channel Channel number + */ +void _adc_dma_enable_channel(struct _adc_dma_device *const device, const uint8_t channel); + +/** + * \brief Disable ADC peripheral + * + * \param[in] device The pointer to ADC device instance + * \param[in] channel Channel number + */ +void _adc_dma_disable_channel(struct _adc_dma_device *const device, const uint8_t channel); + +/** + * \brief Return address of ADC DMA source + * + * \param[in] device The pointer to ADC device instance + * + * \return ADC DMA source address + */ +uint32_t _adc_get_source_for_dma(struct _adc_dma_device *const device); + +/** + * \brief Retrieve ADC conversion data size + * + * \param[in] device The pointer to ADC device instance + * + * \return The data size in bytes + */ +uint8_t _adc_dma_get_data_size(const struct _adc_dma_device *const device); + +/** + * \brief Check if conversion is done + * + * \param[in] device The pointer to ADC device instance + * + * \return The status of conversion + * \retval true The conversion is done + * \retval false The conversion is not done + */ +bool _adc_dma_is_conversion_done(const struct _adc_dma_device *const device); + +/** + * \brief Make conversion + * + * \param[in] device The pointer to ADC device instance + */ +void _adc_dma_convert(struct _adc_dma_device *const device); + +/** + * \brief Set reference source + * + * \param[in] device The pointer to ADC device instance + * \param[in] reference A reference source to set + */ +void _adc_dma_set_reference_source(struct _adc_dma_device *const device, const adc_reference_t reference); + +/** + * \brief Set resolution + * + * \param[in] device The pointer to ADC device instance + * \param[in] resolution A resolution to set + */ +void _adc_dma_set_resolution(struct _adc_dma_device *const device, const adc_resolution_t resolution); + +/** + * \brief Set ADC input source of a channel + * + * \param[in] device The pointer to ADC device instance + * \param[in] pos_input A positive input source to set + * \param[in] neg_input A negative input source to set + * \param[in] channel Channel number + */ +void _adc_dma_set_inputs(struct _adc_dma_device *const device, const adc_pos_input_t pos_input, + const adc_neg_input_t neg_input, const uint8_t channel); + +/** + * \brief Set conversion mode + * + * \param[in] device The pointer to ADC device instance + * \param[in] mode A conversion mode to set + */ +void _adc_dma_set_conversion_mode(struct _adc_dma_device *const device, const enum adc_conversion_mode mode); + +/** + * \brief Set differential mode + * + * \param[in] device The pointer to ADC device instance + * \param[in] channel Channel number + * \param[in] mode A differential mode to set + */ +void _adc_dma_set_channel_differential_mode(struct _adc_dma_device *const device, const uint8_t channel, + const enum adc_differential_mode mode); + +/** + * \brief Set gain + * + * \param[in] device The pointer to ADC device instance + * \param[in] channel Channel number + * \param[in] gain A gain to set + */ +void _adc_dma_set_channel_gain(struct _adc_dma_device *const device, const uint8_t channel, const adc_gain_t gain); + +/** + * \brief Set window mode + * + * \param[in] device The pointer to ADC device instance + * \param[in] mode A mode to set + */ +void _adc_dma_set_window_mode(struct _adc_dma_device *const device, const adc_window_mode_t mode); + +/** + * \brief Set thresholds + * + * \param[in] device The pointer to ADC device instance + * \param[in] low_threshold A lower thresholds to set + * \param[in] up_threshold An upper thresholds to set + */ +void _adc_dma_set_thresholds(struct _adc_dma_device *const device, const adc_threshold_t low_threshold, + const adc_threshold_t up_threshold); + +/** + * \brief Retrieve threshold state + * + * \param[in] device The pointer to ADC device instance + * \param[out] state The threshold state + */ +void _adc_dma_get_threshold_state(const struct _adc_dma_device *const device, adc_threshold_status_t *const state); + +//@} + +#ifdef __cplusplus +} +#endif +/**@}*/ +#endif /* _HPL_ADC_DMA_H_INCLUDED */ |