diff options
Diffstat (limited to 'Sensor Watch Starter Project/hal_gpio.h')
| -rwxr-xr-x | Sensor Watch Starter Project/hal_gpio.h | 126 |
1 files changed, 0 insertions, 126 deletions
diff --git a/Sensor Watch Starter Project/hal_gpio.h b/Sensor Watch Starter Project/hal_gpio.h deleted file mode 100755 index 821a7a9b..00000000 --- a/Sensor Watch Starter Project/hal_gpio.h +++ /dev/null @@ -1,126 +0,0 @@ -/*
- * Copyright (c) 2014-2016, Alex Taradov <alex@taradov.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _HAL_GPIO_H_
-#define _HAL_GPIO_H_
-
-/*- Definitions -------------------------------------------------------------*/
-#define HAL_GPIO_PORTA 0
-#define HAL_GPIO_PORTB 1
-#define HAL_GPIO_PORTC 2
-
-#define HAL_GPIO_PMUX_A 0
-#define HAL_GPIO_PMUX_B 1
-#define HAL_GPIO_PMUX_C 2
-#define HAL_GPIO_PMUX_D 3
-#define HAL_GPIO_PMUX_E 4
-#define HAL_GPIO_PMUX_F 5
-#define HAL_GPIO_PMUX_G 6
-#define HAL_GPIO_PMUX_H 7
-#define HAL_GPIO_PMUX_I 8
-
-#define HAL_GPIO_PIN(name, port, pin) \
- static inline void HAL_GPIO_##name##_set(void) \
- { \
- PORT->Group[HAL_GPIO_PORT##port].OUTSET.reg = (1 << pin); \
- (void)HAL_GPIO_##name##_set; \
- } \
- \
- static inline void HAL_GPIO_##name##_clr(void) \
- { \
- PORT->Group[HAL_GPIO_PORT##port].OUTCLR.reg = (1 << pin); \
- (void)HAL_GPIO_##name##_clr; \
- } \
- \
- static inline void HAL_GPIO_##name##_toggle(void) \
- { \
- PORT->Group[HAL_GPIO_PORT##port].OUTTGL.reg = (1 << pin); \
- (void)HAL_GPIO_##name##_toggle; \
- } \
- \
- static inline void HAL_GPIO_##name##_write(int value) \
- { \
- if (value) \
- PORT->Group[HAL_GPIO_PORT##port].OUTSET.reg = (1 << pin); \
- else \
- PORT->Group[HAL_GPIO_PORT##port].OUTCLR.reg = (1 << pin); \
- (void)HAL_GPIO_##name##_write; \
- } \
- \
- static inline void HAL_GPIO_##name##_in(void) \
- { \
- PORT->Group[HAL_GPIO_PORT##port].DIRCLR.reg = (1 << pin); \
- PORT->Group[HAL_GPIO_PORT##port].PINCFG[pin].reg |= PORT_PINCFG_INEN; \
- PORT->Group[HAL_GPIO_PORT##port].PINCFG[pin].reg &= ~PORT_PINCFG_PULLEN; \
- (void)HAL_GPIO_##name##_in; \
- } \
- \
- static inline void HAL_GPIO_##name##_out(void) \
- { \
- PORT->Group[HAL_GPIO_PORT##port].DIRSET.reg = (1 << pin); \
- PORT->Group[HAL_GPIO_PORT##port].PINCFG[pin].reg |= PORT_PINCFG_INEN; \
- (void)HAL_GPIO_##name##_out; \
- } \
- \
- static inline void HAL_GPIO_##name##_pullup(void) \
- { \
- PORT->Group[HAL_GPIO_PORT##port].OUTSET.reg = (1 << pin); \
- PORT->Group[HAL_GPIO_PORT##port].PINCFG[pin].reg |= PORT_PINCFG_PULLEN; \
- (void)HAL_GPIO_##name##_pullup; \
- } \
- \
- static inline int HAL_GPIO_##name##_read(void) \
- { \
- return (PORT->Group[HAL_GPIO_PORT##port].IN.reg & (1 << pin)) != 0; \
- (void)HAL_GPIO_##name##_read; \
- } \
- \
- static inline int HAL_GPIO_##name##_state(void) \
- { \
- return (PORT->Group[HAL_GPIO_PORT##port].DIR.reg & (1 << pin)) != 0; \
- (void)HAL_GPIO_##name##_state; \
- } \
- \
- static inline void HAL_GPIO_##name##_pmuxen(int mux) \
- { \
- PORT->Group[HAL_GPIO_PORT##port].PINCFG[pin].reg |= PORT_PINCFG_PMUXEN; \
- if (pin & 1) \
- PORT->Group[HAL_GPIO_PORT##port].PMUX[pin>>1].bit.PMUXO = mux; \
- else \
- PORT->Group[HAL_GPIO_PORT##port].PMUX[pin>>1].bit.PMUXE = mux; \
- (void)HAL_GPIO_##name##_pmuxen; \
- } \
- \
- static inline void HAL_GPIO_##name##_pmuxdis(void) \
- { \
- PORT->Group[HAL_GPIO_PORT##port].PINCFG[pin].reg &= ~PORT_PINCFG_PMUXEN; \
- (void)HAL_GPIO_##name##_pmuxdis; \
- } \
-
-#endif // _HAL_GPIO_H_
-
|