1 files changed, 56 insertions, 70 deletions
diff --git a/Sensor Watch Starter Project/include/instance/pm.h b/Sensor Watch Starter Project/include/instance/pm.h
index e3637a45..6ca464f2 100755..100644
--- a/Sensor Watch Starter Project/include/instance/pm.h
+++ b/Sensor Watch Starter Project/include/instance/pm.h
@@ -1,70 +1,56 @@
-/**
- * \file
- *
- * \brief Instance description for PM
- *
- * Copyright (c) 2015 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- *    Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _SAML22_PM_INSTANCE_
-#define _SAML22_PM_INSTANCE_
-
-/* ========== Register definition for PM peripheral ========== */
-#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-#define REG_PM_CTRLA               (0x40000400U) /**< \brief (PM) Control A */
-#define REG_PM_SLEEPCFG            (0x40000401U) /**< \brief (PM) Sleep Configuration */
-#define REG_PM_PLCFG               (0x40000402U) /**< \brief (PM) Performance Level Configuration */
-#define REG_PM_INTENCLR            (0x40000404U) /**< \brief (PM) Interrupt Enable Clear */
-#define REG_PM_INTENSET            (0x40000405U) /**< \brief (PM) Interrupt Enable Set */
-#define REG_PM_INTFLAG             (0x40000406U) /**< \brief (PM) Interrupt Flag Status and Clear */
-#define REG_PM_STDBYCFG            (0x40000408U) /**< \brief (PM) Standby Configuration */
-#else
-#define REG_PM_CTRLA               (*(RwReg8 *)0x40000400U) /**< \brief (PM) Control A */
-#define REG_PM_SLEEPCFG            (*(RwReg8 *)0x40000401U) /**< \brief (PM) Sleep Configuration */
-#define REG_PM_PLCFG               (*(RwReg8 *)0x40000402U) /**< \brief (PM) Performance Level Configuration */
-#define REG_PM_INTENCLR            (*(RwReg8 *)0x40000404U) /**< \brief (PM) Interrupt Enable Clear */
-#define REG_PM_INTENSET            (*(RwReg8 *)0x40000405U) /**< \brief (PM) Interrupt Enable Set */
-#define REG_PM_INTFLAG             (*(RwReg8 *)0x40000406U) /**< \brief (PM) Interrupt Flag Status and Clear */
-#define REG_PM_STDBYCFG            (*(RwReg16*)0x40000408U) /**< \brief (PM) Standby Configuration */
-#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-/* ========== Instance parameters for PM peripheral ========== */
-#define PM_BIAS_RAM_HS              1        // one if RAM HS can be back biased
-#define PM_PD_NUM                   0        // Number of switchable Power Domain
-
-#endif /* _SAML22_PM_INSTANCE_ */
+/**
+ * \file
+ *
+ * \brief Instance description for PM
+ *
+ * Copyright (c) 2018 Microchip Technology Inc.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the Licence at
+ * 
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * 
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef _SAML22_PM_INSTANCE_
+#define _SAML22_PM_INSTANCE_
+
+/* ========== Register definition for PM peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_PM_CTRLA               (0x40000400) /**< \brief (PM) Control A */
+#define REG_PM_SLEEPCFG            (0x40000401) /**< \brief (PM) Sleep Configuration */
+#define REG_PM_PLCFG               (0x40000402) /**< \brief (PM) Performance Level Configuration */
+#define REG_PM_INTENCLR            (0x40000404) /**< \brief (PM) Interrupt Enable Clear */
+#define REG_PM_INTENSET            (0x40000405) /**< \brief (PM) Interrupt Enable Set */
+#define REG_PM_INTFLAG             (0x40000406) /**< \brief (PM) Interrupt Flag Status and Clear */
+#define REG_PM_STDBYCFG            (0x40000408) /**< \brief (PM) Standby Configuration */
+#else
+#define REG_PM_CTRLA               (*(RwReg8 *)0x40000400UL) /**< \brief (PM) Control A */
+#define REG_PM_SLEEPCFG            (*(RwReg8 *)0x40000401UL) /**< \brief (PM) Sleep Configuration */
+#define REG_PM_PLCFG               (*(RwReg8 *)0x40000402UL) /**< \brief (PM) Performance Level Configuration */
+#define REG_PM_INTENCLR            (*(RwReg8 *)0x40000404UL) /**< \brief (PM) Interrupt Enable Clear */
+#define REG_PM_INTENSET            (*(RwReg8 *)0x40000405UL) /**< \brief (PM) Interrupt Enable Set */
+#define REG_PM_INTFLAG             (*(RwReg8 *)0x40000406UL) /**< \brief (PM) Interrupt Flag Status and Clear */
+#define REG_PM_STDBYCFG            (*(RwReg16*)0x40000408UL) /**< \brief (PM) Standby Configuration */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for PM peripheral ========== */
+#define PM_BIAS_RAM_HS              1        // one if RAM HS can be back biased
+#define PM_PD_NUM                   0        // Number of switchable Power Domain
+
+#endif /* _SAML22_PM_INSTANCE_ */