diff options
Diffstat (limited to 'Sensor Watch Starter Project/include/instance/rtc.h')
| -rw-r--r--[-rwxr-xr-x] | Sensor Watch Starter Project/include/instance/rtc.h | 298 |
1 files changed, 142 insertions, 156 deletions
diff --git a/Sensor Watch Starter Project/include/instance/rtc.h b/Sensor Watch Starter Project/include/instance/rtc.h index b1e3a0d4..5c6bf72d 100755..100644 --- a/Sensor Watch Starter Project/include/instance/rtc.h +++ b/Sensor Watch Starter Project/include/instance/rtc.h @@ -1,156 +1,142 @@ -/**
- * \file
- *
- * \brief Instance description for RTC
- *
- * Copyright (c) 2015 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- * Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _SAML22_RTC_INSTANCE_
-#define _SAML22_RTC_INSTANCE_
-
-/* ========== Register definition for RTC peripheral ========== */
-#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-#define REG_RTC_DBGCTRL (0x4000240EU) /**< \brief (RTC) Debug Control */
-#define REG_RTC_FREQCORR (0x40002414U) /**< \brief (RTC) Frequency Correction */
-#define REG_RTC_GP0 (0x40002440U) /**< \brief (RTC) General Purpose 0 */
-#define REG_RTC_GP1 (0x40002444U) /**< \brief (RTC) General Purpose 1 */
-#define REG_RTC_TAMPCTRL (0x40002460U) /**< \brief (RTC) Tamper Control */
-#define REG_RTC_TAMPID (0x40002468U) /**< \brief (RTC) Tamper ID */
-#define REG_RTC_BKUP0 (0x40002480U) /**< \brief (RTC) Backup 0 */
-#define REG_RTC_BKUP1 (0x40002484U) /**< \brief (RTC) Backup 1 */
-#define REG_RTC_BKUP2 (0x40002488U) /**< \brief (RTC) Backup 2 */
-#define REG_RTC_BKUP3 (0x4000248CU) /**< \brief (RTC) Backup 3 */
-#define REG_RTC_BKUP4 (0x40002490U) /**< \brief (RTC) Backup 4 */
-#define REG_RTC_BKUP5 (0x40002494U) /**< \brief (RTC) Backup 5 */
-#define REG_RTC_BKUP6 (0x40002498U) /**< \brief (RTC) Backup 6 */
-#define REG_RTC_BKUP7 (0x4000249CU) /**< \brief (RTC) Backup 7 */
-#define REG_RTC_MODE0_CTRLA (0x40002400U) /**< \brief (RTC) MODE0 Control A */
-#define REG_RTC_MODE0_CTRLB (0x40002402U) /**< \brief (RTC) MODE0 Control B */
-#define REG_RTC_MODE0_EVCTRL (0x40002404U) /**< \brief (RTC) MODE0 Event Control */
-#define REG_RTC_MODE0_INTENCLR (0x40002408U) /**< \brief (RTC) MODE0 Interrupt Enable Clear */
-#define REG_RTC_MODE0_INTENSET (0x4000240AU) /**< \brief (RTC) MODE0 Interrupt Enable Set */
-#define REG_RTC_MODE0_INTFLAG (0x4000240CU) /**< \brief (RTC) MODE0 Interrupt Flag Status and Clear */
-#define REG_RTC_MODE0_SYNCBUSY (0x40002410U) /**< \brief (RTC) MODE0 Synchronization Busy Status */
-#define REG_RTC_MODE0_COUNT (0x40002418U) /**< \brief (RTC) MODE0 Counter Value */
-#define REG_RTC_MODE0_COMP0 (0x40002420U) /**< \brief (RTC) MODE0 Compare 0 Value */
-#define REG_RTC_MODE0_TIMESTAMP (0x40002464U) /**< \brief (RTC) MODE0 Timestamp */
-#define REG_RTC_MODE1_CTRLA (0x40002400U) /**< \brief (RTC) MODE1 Control A */
-#define REG_RTC_MODE1_CTRLB (0x40002402U) /**< \brief (RTC) MODE1 Control B */
-#define REG_RTC_MODE1_EVCTRL (0x40002404U) /**< \brief (RTC) MODE1 Event Control */
-#define REG_RTC_MODE1_INTENCLR (0x40002408U) /**< \brief (RTC) MODE1 Interrupt Enable Clear */
-#define REG_RTC_MODE1_INTENSET (0x4000240AU) /**< \brief (RTC) MODE1 Interrupt Enable Set */
-#define REG_RTC_MODE1_INTFLAG (0x4000240CU) /**< \brief (RTC) MODE1 Interrupt Flag Status and Clear */
-#define REG_RTC_MODE1_SYNCBUSY (0x40002410U) /**< \brief (RTC) MODE1 Synchronization Busy Status */
-#define REG_RTC_MODE1_COUNT (0x40002418U) /**< \brief (RTC) MODE1 Counter Value */
-#define REG_RTC_MODE1_PER (0x4000241CU) /**< \brief (RTC) MODE1 Counter Period */
-#define REG_RTC_MODE1_COMP0 (0x40002420U) /**< \brief (RTC) MODE1 Compare 0 Value */
-#define REG_RTC_MODE1_COMP1 (0x40002422U) /**< \brief (RTC) MODE1 Compare 1 Value */
-#define REG_RTC_MODE1_TIMESTAMP (0x40002464U) /**< \brief (RTC) MODE1 Timestamp */
-#define REG_RTC_MODE2_CTRLA (0x40002400U) /**< \brief (RTC) MODE2 Control A */
-#define REG_RTC_MODE2_CTRLB (0x40002402U) /**< \brief (RTC) MODE2 Control B */
-#define REG_RTC_MODE2_EVCTRL (0x40002404U) /**< \brief (RTC) MODE2 Event Control */
-#define REG_RTC_MODE2_INTENCLR (0x40002408U) /**< \brief (RTC) MODE2 Interrupt Enable Clear */
-#define REG_RTC_MODE2_INTENSET (0x4000240AU) /**< \brief (RTC) MODE2 Interrupt Enable Set */
-#define REG_RTC_MODE2_INTFLAG (0x4000240CU) /**< \brief (RTC) MODE2 Interrupt Flag Status and Clear */
-#define REG_RTC_MODE2_SYNCBUSY (0x40002410U) /**< \brief (RTC) MODE2 Synchronization Busy Status */
-#define REG_RTC_MODE2_CLOCK (0x40002418U) /**< \brief (RTC) MODE2 Clock Value */
-#define REG_RTC_MODE2_TIMESTAMP (0x40002464U) /**< \brief (RTC) MODE2 Timestamp */
-#define REG_RTC_MODE2_ALARM_ALARM0 (0x40002420U) /**< \brief (RTC) MODE2_ALARM Alarm 0 Value */
-#define REG_RTC_MODE2_ALARM_MASK0 (0x40002424U) /**< \brief (RTC) MODE2_ALARM Alarm 0 Mask */
-#else
-#define REG_RTC_DBGCTRL (*(RwReg8 *)0x4000240EU) /**< \brief (RTC) Debug Control */
-#define REG_RTC_FREQCORR (*(RwReg8 *)0x40002414U) /**< \brief (RTC) Frequency Correction */
-#define REG_RTC_GP0 (*(RwReg *)0x40002440U) /**< \brief (RTC) General Purpose 0 */
-#define REG_RTC_GP1 (*(RwReg *)0x40002444U) /**< \brief (RTC) General Purpose 1 */
-#define REG_RTC_TAMPCTRL (*(RwReg *)0x40002460U) /**< \brief (RTC) Tamper Control */
-#define REG_RTC_TAMPID (*(RwReg *)0x40002468U) /**< \brief (RTC) Tamper ID */
-#define REG_RTC_BKUP0 (*(RwReg *)0x40002480U) /**< \brief (RTC) Backup 0 */
-#define REG_RTC_BKUP1 (*(RwReg *)0x40002484U) /**< \brief (RTC) Backup 1 */
-#define REG_RTC_BKUP2 (*(RwReg *)0x40002488U) /**< \brief (RTC) Backup 2 */
-#define REG_RTC_BKUP3 (*(RwReg *)0x4000248CU) /**< \brief (RTC) Backup 3 */
-#define REG_RTC_BKUP4 (*(RwReg *)0x40002490U) /**< \brief (RTC) Backup 4 */
-#define REG_RTC_BKUP5 (*(RwReg *)0x40002494U) /**< \brief (RTC) Backup 5 */
-#define REG_RTC_BKUP6 (*(RwReg *)0x40002498U) /**< \brief (RTC) Backup 6 */
-#define REG_RTC_BKUP7 (*(RwReg *)0x4000249CU) /**< \brief (RTC) Backup 7 */
-#define REG_RTC_MODE0_CTRLA (*(RwReg16*)0x40002400U) /**< \brief (RTC) MODE0 Control A */
-#define REG_RTC_MODE0_CTRLB (*(RwReg16*)0x40002402U) /**< \brief (RTC) MODE0 Control B */
-#define REG_RTC_MODE0_EVCTRL (*(RwReg *)0x40002404U) /**< \brief (RTC) MODE0 Event Control */
-#define REG_RTC_MODE0_INTENCLR (*(RwReg16*)0x40002408U) /**< \brief (RTC) MODE0 Interrupt Enable Clear */
-#define REG_RTC_MODE0_INTENSET (*(RwReg16*)0x4000240AU) /**< \brief (RTC) MODE0 Interrupt Enable Set */
-#define REG_RTC_MODE0_INTFLAG (*(RwReg16*)0x4000240CU) /**< \brief (RTC) MODE0 Interrupt Flag Status and Clear */
-#define REG_RTC_MODE0_SYNCBUSY (*(RoReg *)0x40002410U) /**< \brief (RTC) MODE0 Synchronization Busy Status */
-#define REG_RTC_MODE0_COUNT (*(RwReg *)0x40002418U) /**< \brief (RTC) MODE0 Counter Value */
-#define REG_RTC_MODE0_COMP0 (*(RwReg *)0x40002420U) /**< \brief (RTC) MODE0 Compare 0 Value */
-#define REG_RTC_MODE0_TIMESTAMP (*(RoReg *)0x40002464U) /**< \brief (RTC) MODE0 Timestamp */
-#define REG_RTC_MODE1_CTRLA (*(RwReg16*)0x40002400U) /**< \brief (RTC) MODE1 Control A */
-#define REG_RTC_MODE1_CTRLB (*(RwReg16*)0x40002402U) /**< \brief (RTC) MODE1 Control B */
-#define REG_RTC_MODE1_EVCTRL (*(RwReg *)0x40002404U) /**< \brief (RTC) MODE1 Event Control */
-#define REG_RTC_MODE1_INTENCLR (*(RwReg16*)0x40002408U) /**< \brief (RTC) MODE1 Interrupt Enable Clear */
-#define REG_RTC_MODE1_INTENSET (*(RwReg16*)0x4000240AU) /**< \brief (RTC) MODE1 Interrupt Enable Set */
-#define REG_RTC_MODE1_INTFLAG (*(RwReg16*)0x4000240CU) /**< \brief (RTC) MODE1 Interrupt Flag Status and Clear */
-#define REG_RTC_MODE1_SYNCBUSY (*(RoReg *)0x40002410U) /**< \brief (RTC) MODE1 Synchronization Busy Status */
-#define REG_RTC_MODE1_COUNT (*(RwReg16*)0x40002418U) /**< \brief (RTC) MODE1 Counter Value */
-#define REG_RTC_MODE1_PER (*(RwReg16*)0x4000241CU) /**< \brief (RTC) MODE1 Counter Period */
-#define REG_RTC_MODE1_COMP0 (*(RwReg16*)0x40002420U) /**< \brief (RTC) MODE1 Compare 0 Value */
-#define REG_RTC_MODE1_COMP1 (*(RwReg16*)0x40002422U) /**< \brief (RTC) MODE1 Compare 1 Value */
-#define REG_RTC_MODE1_TIMESTAMP (*(RoReg *)0x40002464U) /**< \brief (RTC) MODE1 Timestamp */
-#define REG_RTC_MODE2_CTRLA (*(RwReg16*)0x40002400U) /**< \brief (RTC) MODE2 Control A */
-#define REG_RTC_MODE2_CTRLB (*(RwReg16*)0x40002402U) /**< \brief (RTC) MODE2 Control B */
-#define REG_RTC_MODE2_EVCTRL (*(RwReg *)0x40002404U) /**< \brief (RTC) MODE2 Event Control */
-#define REG_RTC_MODE2_INTENCLR (*(RwReg16*)0x40002408U) /**< \brief (RTC) MODE2 Interrupt Enable Clear */
-#define REG_RTC_MODE2_INTENSET (*(RwReg16*)0x4000240AU) /**< \brief (RTC) MODE2 Interrupt Enable Set */
-#define REG_RTC_MODE2_INTFLAG (*(RwReg16*)0x4000240CU) /**< \brief (RTC) MODE2 Interrupt Flag Status and Clear */
-#define REG_RTC_MODE2_SYNCBUSY (*(RoReg *)0x40002410U) /**< \brief (RTC) MODE2 Synchronization Busy Status */
-#define REG_RTC_MODE2_CLOCK (*(RwReg *)0x40002418U) /**< \brief (RTC) MODE2 Clock Value */
-#define REG_RTC_MODE2_TIMESTAMP (*(RoReg *)0x40002464U) /**< \brief (RTC) MODE2 Timestamp */
-#define REG_RTC_MODE2_ALARM_ALARM0 (*(RwReg *)0x40002420U) /**< \brief (RTC) MODE2_ALARM Alarm 0 Value */
-#define REG_RTC_MODE2_ALARM_MASK0 (*(RwReg *)0x40002424U) /**< \brief (RTC) MODE2_ALARM Alarm 0 Mask */
-#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-/* ========== Instance parameters for RTC peripheral ========== */
-#define RTC_ALARM_NUM 1 // Number of Alarms
-#define RTC_BKUP_NUM 8 // Number of Backup Registers
-#define RTC_COMP16_NUM 2 // Number of 16-bit Comparators
-#define RTC_COMP32_NUM 1 // Number of 32-bit Comparators
-#define RTC_DMAC_ID_TIMESTAMP 1 // DMA RTC timestamp trigger
-#define RTC_GPR_NUM 2 // Number of General-Purpose Registers
-#define RTC_PER_NUM 8 // Number of Periodic Intervals
-#define RTC_TAMPER_NUM 5 // Number of Tamper Inputs
-
-#endif /* _SAML22_RTC_INSTANCE_ */
+/** + * \file + * + * \brief Instance description for RTC + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAML22_RTC_INSTANCE_ +#define _SAML22_RTC_INSTANCE_ + +/* ========== Register definition for RTC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_RTC_DBGCTRL (0x4000240E) /**< \brief (RTC) Debug Control */ +#define REG_RTC_FREQCORR (0x40002414) /**< \brief (RTC) Frequency Correction */ +#define REG_RTC_GP0 (0x40002440) /**< \brief (RTC) General Purpose 0 */ +#define REG_RTC_GP1 (0x40002444) /**< \brief (RTC) General Purpose 1 */ +#define REG_RTC_TAMPCTRL (0x40002460) /**< \brief (RTC) Tamper Control */ +#define REG_RTC_TAMPID (0x40002468) /**< \brief (RTC) Tamper ID */ +#define REG_RTC_BKUP0 (0x40002480) /**< \brief (RTC) Backup 0 */ +#define REG_RTC_BKUP1 (0x40002484) /**< \brief (RTC) Backup 1 */ +#define REG_RTC_BKUP2 (0x40002488) /**< \brief (RTC) Backup 2 */ +#define REG_RTC_BKUP3 (0x4000248C) /**< \brief (RTC) Backup 3 */ +#define REG_RTC_BKUP4 (0x40002490) /**< \brief (RTC) Backup 4 */ +#define REG_RTC_BKUP5 (0x40002494) /**< \brief (RTC) Backup 5 */ +#define REG_RTC_BKUP6 (0x40002498) /**< \brief (RTC) Backup 6 */ +#define REG_RTC_BKUP7 (0x4000249C) /**< \brief (RTC) Backup 7 */ +#define REG_RTC_MODE0_CTRLA (0x40002400) /**< \brief (RTC) MODE0 Control A */ +#define REG_RTC_MODE0_CTRLB (0x40002402) /**< \brief (RTC) MODE0 Control B */ +#define REG_RTC_MODE0_EVCTRL (0x40002404) /**< \brief (RTC) MODE0 Event Control */ +#define REG_RTC_MODE0_INTENCLR (0x40002408) /**< \brief (RTC) MODE0 Interrupt Enable Clear */ +#define REG_RTC_MODE0_INTENSET (0x4000240A) /**< \brief (RTC) MODE0 Interrupt Enable Set */ +#define REG_RTC_MODE0_INTFLAG (0x4000240C) /**< \brief (RTC) MODE0 Interrupt Flag Status and Clear */ +#define REG_RTC_MODE0_SYNCBUSY (0x40002410) /**< \brief (RTC) MODE0 Synchronization Busy Status */ +#define REG_RTC_MODE0_COUNT (0x40002418) /**< \brief (RTC) MODE0 Counter Value */ +#define REG_RTC_MODE0_COMP0 (0x40002420) /**< \brief (RTC) MODE0 Compare 0 Value */ +#define REG_RTC_MODE0_TIMESTAMP (0x40002464) /**< \brief (RTC) MODE0 Timestamp */ +#define REG_RTC_MODE1_CTRLA (0x40002400) /**< \brief (RTC) MODE1 Control A */ +#define REG_RTC_MODE1_CTRLB (0x40002402) /**< \brief (RTC) MODE1 Control B */ +#define REG_RTC_MODE1_EVCTRL (0x40002404) /**< \brief (RTC) MODE1 Event Control */ +#define REG_RTC_MODE1_INTENCLR (0x40002408) /**< \brief (RTC) MODE1 Interrupt Enable Clear */ +#define REG_RTC_MODE1_INTENSET (0x4000240A) /**< \brief (RTC) MODE1 Interrupt Enable Set */ +#define REG_RTC_MODE1_INTFLAG (0x4000240C) /**< \brief (RTC) MODE1 Interrupt Flag Status and Clear */ +#define REG_RTC_MODE1_SYNCBUSY (0x40002410) /**< \brief (RTC) MODE1 Synchronization Busy Status */ +#define REG_RTC_MODE1_COUNT (0x40002418) /**< \brief (RTC) MODE1 Counter Value */ +#define REG_RTC_MODE1_PER (0x4000241C) /**< \brief (RTC) MODE1 Counter Period */ +#define REG_RTC_MODE1_COMP0 (0x40002420) /**< \brief (RTC) MODE1 Compare 0 Value */ +#define REG_RTC_MODE1_COMP1 (0x40002422) /**< \brief (RTC) MODE1 Compare 1 Value */ +#define REG_RTC_MODE1_TIMESTAMP (0x40002464) /**< \brief (RTC) MODE1 Timestamp */ +#define REG_RTC_MODE2_CTRLA (0x40002400) /**< \brief (RTC) MODE2 Control A */ +#define REG_RTC_MODE2_CTRLB (0x40002402) /**< \brief (RTC) MODE2 Control B */ +#define REG_RTC_MODE2_EVCTRL (0x40002404) /**< \brief (RTC) MODE2 Event Control */ +#define REG_RTC_MODE2_INTENCLR (0x40002408) /**< \brief (RTC) MODE2 Interrupt Enable Clear */ +#define REG_RTC_MODE2_INTENSET (0x4000240A) /**< \brief (RTC) MODE2 Interrupt Enable Set */ +#define REG_RTC_MODE2_INTFLAG (0x4000240C) /**< \brief (RTC) MODE2 Interrupt Flag Status and Clear */ +#define REG_RTC_MODE2_SYNCBUSY (0x40002410) /**< \brief (RTC) MODE2 Synchronization Busy Status */ +#define REG_RTC_MODE2_CLOCK (0x40002418) /**< \brief (RTC) MODE2 Clock Value */ +#define REG_RTC_MODE2_TIMESTAMP (0x40002464) /**< \brief (RTC) MODE2 Timestamp */ +#define REG_RTC_MODE2_ALARM_ALARM0 (0x40002420) /**< \brief (RTC) MODE2_ALARM Alarm 0 Value */ +#define REG_RTC_MODE2_ALARM_MASK0 (0x40002424) /**< \brief (RTC) MODE2_ALARM Alarm 0 Mask */ +#else +#define REG_RTC_DBGCTRL (*(RwReg8 *)0x4000240EUL) /**< \brief (RTC) Debug Control */ +#define REG_RTC_FREQCORR (*(RwReg8 *)0x40002414UL) /**< \brief (RTC) Frequency Correction */ +#define REG_RTC_GP0 (*(RwReg *)0x40002440UL) /**< \brief (RTC) General Purpose 0 */ +#define REG_RTC_GP1 (*(RwReg *)0x40002444UL) /**< \brief (RTC) General Purpose 1 */ +#define REG_RTC_TAMPCTRL (*(RwReg *)0x40002460UL) /**< \brief (RTC) Tamper Control */ +#define REG_RTC_TAMPID (*(RwReg *)0x40002468UL) /**< \brief (RTC) Tamper ID */ +#define REG_RTC_BKUP0 (*(RwReg *)0x40002480UL) /**< \brief (RTC) Backup 0 */ +#define REG_RTC_BKUP1 (*(RwReg *)0x40002484UL) /**< \brief (RTC) Backup 1 */ +#define REG_RTC_BKUP2 (*(RwReg *)0x40002488UL) /**< \brief (RTC) Backup 2 */ +#define REG_RTC_BKUP3 (*(RwReg *)0x4000248CUL) /**< \brief (RTC) Backup 3 */ +#define REG_RTC_BKUP4 (*(RwReg *)0x40002490UL) /**< \brief (RTC) Backup 4 */ +#define REG_RTC_BKUP5 (*(RwReg *)0x40002494UL) /**< \brief (RTC) Backup 5 */ +#define REG_RTC_BKUP6 (*(RwReg *)0x40002498UL) /**< \brief (RTC) Backup 6 */ +#define REG_RTC_BKUP7 (*(RwReg *)0x4000249CUL) /**< \brief (RTC) Backup 7 */ +#define REG_RTC_MODE0_CTRLA (*(RwReg16*)0x40002400UL) /**< \brief (RTC) MODE0 Control A */ +#define REG_RTC_MODE0_CTRLB (*(RwReg16*)0x40002402UL) /**< \brief (RTC) MODE0 Control B */ +#define REG_RTC_MODE0_EVCTRL (*(RwReg *)0x40002404UL) /**< \brief (RTC) MODE0 Event Control */ +#define REG_RTC_MODE0_INTENCLR (*(RwReg16*)0x40002408UL) /**< \brief (RTC) MODE0 Interrupt Enable Clear */ +#define REG_RTC_MODE0_INTENSET (*(RwReg16*)0x4000240AUL) /**< \brief (RTC) MODE0 Interrupt Enable Set */ +#define REG_RTC_MODE0_INTFLAG (*(RwReg16*)0x4000240CUL) /**< \brief (RTC) MODE0 Interrupt Flag Status and Clear */ +#define REG_RTC_MODE0_SYNCBUSY (*(RoReg *)0x40002410UL) /**< \brief (RTC) MODE0 Synchronization Busy Status */ +#define REG_RTC_MODE0_COUNT (*(RwReg *)0x40002418UL) /**< \brief (RTC) MODE0 Counter Value */ +#define REG_RTC_MODE0_COMP0 (*(RwReg *)0x40002420UL) /**< \brief (RTC) MODE0 Compare 0 Value */ +#define REG_RTC_MODE0_TIMESTAMP (*(RoReg *)0x40002464UL) /**< \brief (RTC) MODE0 Timestamp */ +#define REG_RTC_MODE1_CTRLA (*(RwReg16*)0x40002400UL) /**< \brief (RTC) MODE1 Control A */ +#define REG_RTC_MODE1_CTRLB (*(RwReg16*)0x40002402UL) /**< \brief (RTC) MODE1 Control B */ +#define REG_RTC_MODE1_EVCTRL (*(RwReg *)0x40002404UL) /**< \brief (RTC) MODE1 Event Control */ +#define REG_RTC_MODE1_INTENCLR (*(RwReg16*)0x40002408UL) /**< \brief (RTC) MODE1 Interrupt Enable Clear */ +#define REG_RTC_MODE1_INTENSET (*(RwReg16*)0x4000240AUL) /**< \brief (RTC) MODE1 Interrupt Enable Set */ +#define REG_RTC_MODE1_INTFLAG (*(RwReg16*)0x4000240CUL) /**< \brief (RTC) MODE1 Interrupt Flag Status and Clear */ +#define REG_RTC_MODE1_SYNCBUSY (*(RoReg *)0x40002410UL) /**< \brief (RTC) MODE1 Synchronization Busy Status */ +#define REG_RTC_MODE1_COUNT (*(RwReg16*)0x40002418UL) /**< \brief (RTC) MODE1 Counter Value */ +#define REG_RTC_MODE1_PER (*(RwReg16*)0x4000241CUL) /**< \brief (RTC) MODE1 Counter Period */ +#define REG_RTC_MODE1_COMP0 (*(RwReg16*)0x40002420UL) /**< \brief (RTC) MODE1 Compare 0 Value */ +#define REG_RTC_MODE1_COMP1 (*(RwReg16*)0x40002422UL) /**< \brief (RTC) MODE1 Compare 1 Value */ +#define REG_RTC_MODE1_TIMESTAMP (*(RoReg *)0x40002464UL) /**< \brief (RTC) MODE1 Timestamp */ +#define REG_RTC_MODE2_CTRLA (*(RwReg16*)0x40002400UL) /**< \brief (RTC) MODE2 Control A */ +#define REG_RTC_MODE2_CTRLB (*(RwReg16*)0x40002402UL) /**< \brief (RTC) MODE2 Control B */ +#define REG_RTC_MODE2_EVCTRL (*(RwReg *)0x40002404UL) /**< \brief (RTC) MODE2 Event Control */ +#define REG_RTC_MODE2_INTENCLR (*(RwReg16*)0x40002408UL) /**< \brief (RTC) MODE2 Interrupt Enable Clear */ +#define REG_RTC_MODE2_INTENSET (*(RwReg16*)0x4000240AUL) /**< \brief (RTC) MODE2 Interrupt Enable Set */ +#define REG_RTC_MODE2_INTFLAG (*(RwReg16*)0x4000240CUL) /**< \brief (RTC) MODE2 Interrupt Flag Status and Clear */ +#define REG_RTC_MODE2_SYNCBUSY (*(RoReg *)0x40002410UL) /**< \brief (RTC) MODE2 Synchronization Busy Status */ +#define REG_RTC_MODE2_CLOCK (*(RwReg *)0x40002418UL) /**< \brief (RTC) MODE2 Clock Value */ +#define REG_RTC_MODE2_TIMESTAMP (*(RoReg *)0x40002464UL) /**< \brief (RTC) MODE2 Timestamp */ +#define REG_RTC_MODE2_ALARM_ALARM0 (*(RwReg *)0x40002420UL) /**< \brief (RTC) MODE2_ALARM Alarm 0 Value */ +#define REG_RTC_MODE2_ALARM_MASK0 (*(RwReg8 *)0x40002424UL) /**< \brief (RTC) MODE2_ALARM Alarm 0 Mask */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/* ========== Instance parameters for RTC peripheral ========== */ +#define RTC_ALARM_NUM 1 // Number of Alarms +#define RTC_BKUP_NUM 8 // Number of Backup Registers +#define RTC_COMP16_NUM 2 // Number of 16-bit Comparators +#define RTC_COMP32_NUM 1 // Number of 32-bit Comparators +#define RTC_DMAC_ID_TIMESTAMP 1 // DMA RTC timestamp trigger +#define RTC_GPR_NUM 2 // Number of General-Purpose Registers +#define RTC_PER_NUM 8 // Number of Periodic Intervals +#define RTC_TAMPER_NUM 5 // Number of Tamper Inputs + +#endif /* _SAML22_RTC_INSTANCE_ */ |