diff options
Diffstat (limited to 'Sensor Watch Starter Project/include/instance/sercom1.h')
| -rw-r--r--[-rwxr-xr-x] | Sensor Watch Starter Project/include/instance/sercom1.h | 298 |
1 files changed, 142 insertions, 156 deletions
diff --git a/Sensor Watch Starter Project/include/instance/sercom1.h b/Sensor Watch Starter Project/include/instance/sercom1.h index 85ad084b..1c0176ef 100755..100644 --- a/Sensor Watch Starter Project/include/instance/sercom1.h +++ b/Sensor Watch Starter Project/include/instance/sercom1.h @@ -1,156 +1,142 @@ -/**
- * \file
- *
- * \brief Instance description for SERCOM1
- *
- * Copyright (c) 2015 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- * Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _SAML22_SERCOM1_INSTANCE_
-#define _SAML22_SERCOM1_INSTANCE_
-
-/* ========== Register definition for SERCOM1 peripheral ========== */
-#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-#define REG_SERCOM1_I2CM_CTRLA (0x42000800U) /**< \brief (SERCOM1) I2CM Control A */
-#define REG_SERCOM1_I2CM_CTRLB (0x42000804U) /**< \brief (SERCOM1) I2CM Control B */
-#define REG_SERCOM1_I2CM_BAUD (0x4200080CU) /**< \brief (SERCOM1) I2CM Baud Rate */
-#define REG_SERCOM1_I2CM_INTENCLR (0x42000814U) /**< \brief (SERCOM1) I2CM Interrupt Enable Clear */
-#define REG_SERCOM1_I2CM_INTENSET (0x42000816U) /**< \brief (SERCOM1) I2CM Interrupt Enable Set */
-#define REG_SERCOM1_I2CM_INTFLAG (0x42000818U) /**< \brief (SERCOM1) I2CM Interrupt Flag Status and Clear */
-#define REG_SERCOM1_I2CM_STATUS (0x4200081AU) /**< \brief (SERCOM1) I2CM Status */
-#define REG_SERCOM1_I2CM_SYNCBUSY (0x4200081CU) /**< \brief (SERCOM1) I2CM Synchronization Busy */
-#define REG_SERCOM1_I2CM_ADDR (0x42000824U) /**< \brief (SERCOM1) I2CM Address */
-#define REG_SERCOM1_I2CM_DATA (0x42000828U) /**< \brief (SERCOM1) I2CM Data */
-#define REG_SERCOM1_I2CM_DBGCTRL (0x42000830U) /**< \brief (SERCOM1) I2CM Debug Control */
-#define REG_SERCOM1_I2CS_CTRLA (0x42000800U) /**< \brief (SERCOM1) I2CS Control A */
-#define REG_SERCOM1_I2CS_CTRLB (0x42000804U) /**< \brief (SERCOM1) I2CS Control B */
-#define REG_SERCOM1_I2CS_INTENCLR (0x42000814U) /**< \brief (SERCOM1) I2CS Interrupt Enable Clear */
-#define REG_SERCOM1_I2CS_INTENSET (0x42000816U) /**< \brief (SERCOM1) I2CS Interrupt Enable Set */
-#define REG_SERCOM1_I2CS_INTFLAG (0x42000818U) /**< \brief (SERCOM1) I2CS Interrupt Flag Status and Clear */
-#define REG_SERCOM1_I2CS_STATUS (0x4200081AU) /**< \brief (SERCOM1) I2CS Status */
-#define REG_SERCOM1_I2CS_SYNCBUSY (0x4200081CU) /**< \brief (SERCOM1) I2CS Synchronization Busy */
-#define REG_SERCOM1_I2CS_ADDR (0x42000824U) /**< \brief (SERCOM1) I2CS Address */
-#define REG_SERCOM1_I2CS_DATA (0x42000828U) /**< \brief (SERCOM1) I2CS Data */
-#define REG_SERCOM1_SPI_CTRLA (0x42000800U) /**< \brief (SERCOM1) SPI Control A */
-#define REG_SERCOM1_SPI_CTRLB (0x42000804U) /**< \brief (SERCOM1) SPI Control B */
-#define REG_SERCOM1_SPI_BAUD (0x4200080CU) /**< \brief (SERCOM1) SPI Baud Rate */
-#define REG_SERCOM1_SPI_INTENCLR (0x42000814U) /**< \brief (SERCOM1) SPI Interrupt Enable Clear */
-#define REG_SERCOM1_SPI_INTENSET (0x42000816U) /**< \brief (SERCOM1) SPI Interrupt Enable Set */
-#define REG_SERCOM1_SPI_INTFLAG (0x42000818U) /**< \brief (SERCOM1) SPI Interrupt Flag Status and Clear */
-#define REG_SERCOM1_SPI_STATUS (0x4200081AU) /**< \brief (SERCOM1) SPI Status */
-#define REG_SERCOM1_SPI_SYNCBUSY (0x4200081CU) /**< \brief (SERCOM1) SPI Synchronization Busy */
-#define REG_SERCOM1_SPI_ADDR (0x42000824U) /**< \brief (SERCOM1) SPI Address */
-#define REG_SERCOM1_SPI_DATA (0x42000828U) /**< \brief (SERCOM1) SPI Data */
-#define REG_SERCOM1_SPI_DBGCTRL (0x42000830U) /**< \brief (SERCOM1) SPI Debug Control */
-#define REG_SERCOM1_USART_CTRLA (0x42000800U) /**< \brief (SERCOM1) USART Control A */
-#define REG_SERCOM1_USART_CTRLB (0x42000804U) /**< \brief (SERCOM1) USART Control B */
-#define REG_SERCOM1_USART_CTRLC (0x42000808U) /**< \brief (SERCOM1) USART Control C */
-#define REG_SERCOM1_USART_BAUD (0x4200080CU) /**< \brief (SERCOM1) USART Baud Rate */
-#define REG_SERCOM1_USART_RXPL (0x4200080EU) /**< \brief (SERCOM1) USART Receive Pulse Length */
-#define REG_SERCOM1_USART_INTENCLR (0x42000814U) /**< \brief (SERCOM1) USART Interrupt Enable Clear */
-#define REG_SERCOM1_USART_INTENSET (0x42000816U) /**< \brief (SERCOM1) USART Interrupt Enable Set */
-#define REG_SERCOM1_USART_INTFLAG (0x42000818U) /**< \brief (SERCOM1) USART Interrupt Flag Status and Clear */
-#define REG_SERCOM1_USART_STATUS (0x4200081AU) /**< \brief (SERCOM1) USART Status */
-#define REG_SERCOM1_USART_SYNCBUSY (0x4200081CU) /**< \brief (SERCOM1) USART Synchronization Busy */
-#define REG_SERCOM1_USART_RXERRCNT (0x42000820U) /**< \brief (SERCOM1) USART Receive Error Count */
-#define REG_SERCOM1_USART_DATA (0x42000828U) /**< \brief (SERCOM1) USART Data */
-#define REG_SERCOM1_USART_DBGCTRL (0x42000830U) /**< \brief (SERCOM1) USART Debug Control */
-#else
-#define REG_SERCOM1_I2CM_CTRLA (*(RwReg *)0x42000800U) /**< \brief (SERCOM1) I2CM Control A */
-#define REG_SERCOM1_I2CM_CTRLB (*(RwReg *)0x42000804U) /**< \brief (SERCOM1) I2CM Control B */
-#define REG_SERCOM1_I2CM_BAUD (*(RwReg *)0x4200080CU) /**< \brief (SERCOM1) I2CM Baud Rate */
-#define REG_SERCOM1_I2CM_INTENCLR (*(RwReg8 *)0x42000814U) /**< \brief (SERCOM1) I2CM Interrupt Enable Clear */
-#define REG_SERCOM1_I2CM_INTENSET (*(RwReg8 *)0x42000816U) /**< \brief (SERCOM1) I2CM Interrupt Enable Set */
-#define REG_SERCOM1_I2CM_INTFLAG (*(RwReg8 *)0x42000818U) /**< \brief (SERCOM1) I2CM Interrupt Flag Status and Clear */
-#define REG_SERCOM1_I2CM_STATUS (*(RwReg16*)0x4200081AU) /**< \brief (SERCOM1) I2CM Status */
-#define REG_SERCOM1_I2CM_SYNCBUSY (*(RoReg *)0x4200081CU) /**< \brief (SERCOM1) I2CM Synchronization Busy */
-#define REG_SERCOM1_I2CM_ADDR (*(RwReg *)0x42000824U) /**< \brief (SERCOM1) I2CM Address */
-#define REG_SERCOM1_I2CM_DATA (*(RwReg8 *)0x42000828U) /**< \brief (SERCOM1) I2CM Data */
-#define REG_SERCOM1_I2CM_DBGCTRL (*(RwReg8 *)0x42000830U) /**< \brief (SERCOM1) I2CM Debug Control */
-#define REG_SERCOM1_I2CS_CTRLA (*(RwReg *)0x42000800U) /**< \brief (SERCOM1) I2CS Control A */
-#define REG_SERCOM1_I2CS_CTRLB (*(RwReg *)0x42000804U) /**< \brief (SERCOM1) I2CS Control B */
-#define REG_SERCOM1_I2CS_INTENCLR (*(RwReg8 *)0x42000814U) /**< \brief (SERCOM1) I2CS Interrupt Enable Clear */
-#define REG_SERCOM1_I2CS_INTENSET (*(RwReg8 *)0x42000816U) /**< \brief (SERCOM1) I2CS Interrupt Enable Set */
-#define REG_SERCOM1_I2CS_INTFLAG (*(RwReg8 *)0x42000818U) /**< \brief (SERCOM1) I2CS Interrupt Flag Status and Clear */
-#define REG_SERCOM1_I2CS_STATUS (*(RwReg16*)0x4200081AU) /**< \brief (SERCOM1) I2CS Status */
-#define REG_SERCOM1_I2CS_SYNCBUSY (*(RoReg *)0x4200081CU) /**< \brief (SERCOM1) I2CS Synchronization Busy */
-#define REG_SERCOM1_I2CS_ADDR (*(RwReg *)0x42000824U) /**< \brief (SERCOM1) I2CS Address */
-#define REG_SERCOM1_I2CS_DATA (*(RwReg8 *)0x42000828U) /**< \brief (SERCOM1) I2CS Data */
-#define REG_SERCOM1_SPI_CTRLA (*(RwReg *)0x42000800U) /**< \brief (SERCOM1) SPI Control A */
-#define REG_SERCOM1_SPI_CTRLB (*(RwReg *)0x42000804U) /**< \brief (SERCOM1) SPI Control B */
-#define REG_SERCOM1_SPI_BAUD (*(RwReg8 *)0x4200080CU) /**< \brief (SERCOM1) SPI Baud Rate */
-#define REG_SERCOM1_SPI_INTENCLR (*(RwReg8 *)0x42000814U) /**< \brief (SERCOM1) SPI Interrupt Enable Clear */
-#define REG_SERCOM1_SPI_INTENSET (*(RwReg8 *)0x42000816U) /**< \brief (SERCOM1) SPI Interrupt Enable Set */
-#define REG_SERCOM1_SPI_INTFLAG (*(RwReg8 *)0x42000818U) /**< \brief (SERCOM1) SPI Interrupt Flag Status and Clear */
-#define REG_SERCOM1_SPI_STATUS (*(RwReg16*)0x4200081AU) /**< \brief (SERCOM1) SPI Status */
-#define REG_SERCOM1_SPI_SYNCBUSY (*(RoReg *)0x4200081CU) /**< \brief (SERCOM1) SPI Synchronization Busy */
-#define REG_SERCOM1_SPI_ADDR (*(RwReg *)0x42000824U) /**< \brief (SERCOM1) SPI Address */
-#define REG_SERCOM1_SPI_DATA (*(RwReg *)0x42000828U) /**< \brief (SERCOM1) SPI Data */
-#define REG_SERCOM1_SPI_DBGCTRL (*(RwReg8 *)0x42000830U) /**< \brief (SERCOM1) SPI Debug Control */
-#define REG_SERCOM1_USART_CTRLA (*(RwReg *)0x42000800U) /**< \brief (SERCOM1) USART Control A */
-#define REG_SERCOM1_USART_CTRLB (*(RwReg *)0x42000804U) /**< \brief (SERCOM1) USART Control B */
-#define REG_SERCOM1_USART_CTRLC (*(RwReg *)0x42000808U) /**< \brief (SERCOM1) USART Control C */
-#define REG_SERCOM1_USART_BAUD (*(RwReg16*)0x4200080CU) /**< \brief (SERCOM1) USART Baud Rate */
-#define REG_SERCOM1_USART_RXPL (*(RwReg8 *)0x4200080EU) /**< \brief (SERCOM1) USART Receive Pulse Length */
-#define REG_SERCOM1_USART_INTENCLR (*(RwReg8 *)0x42000814U) /**< \brief (SERCOM1) USART Interrupt Enable Clear */
-#define REG_SERCOM1_USART_INTENSET (*(RwReg8 *)0x42000816U) /**< \brief (SERCOM1) USART Interrupt Enable Set */
-#define REG_SERCOM1_USART_INTFLAG (*(RwReg8 *)0x42000818U) /**< \brief (SERCOM1) USART Interrupt Flag Status and Clear */
-#define REG_SERCOM1_USART_STATUS (*(RwReg16*)0x4200081AU) /**< \brief (SERCOM1) USART Status */
-#define REG_SERCOM1_USART_SYNCBUSY (*(RoReg *)0x4200081CU) /**< \brief (SERCOM1) USART Synchronization Busy */
-#define REG_SERCOM1_USART_RXERRCNT (*(RoReg8 *)0x42000820U) /**< \brief (SERCOM1) USART Receive Error Count */
-#define REG_SERCOM1_USART_DATA (*(RwReg16*)0x42000828U) /**< \brief (SERCOM1) USART Data */
-#define REG_SERCOM1_USART_DBGCTRL (*(RwReg8 *)0x42000830U) /**< \brief (SERCOM1) USART Debug Control */
-#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-/* ========== Instance parameters for SERCOM1 peripheral ========== */
-#define SERCOM1_DMAC_ID_RX 4 // Index of DMA RX trigger
-#define SERCOM1_DMAC_ID_TX 5 // Index of DMA TX trigger
-#define SERCOM1_GCLK_ID_CORE 17
-#define SERCOM1_GCLK_ID_SLOW 15
-#define SERCOM1_INT_MSB 6
-#define SERCOM1_PMSB 3
-#define SERCOM1_SPI 1 // SPI mode implemented?
-#define SERCOM1_TWIM 1 // TWI Master mode implemented?
-#define SERCOM1_TWIS 1 // TWI Slave mode implemented?
-#define SERCOM1_TWI_HSMODE 1 // TWI HighSpeed mode implemented?
-#define SERCOM1_USART 1 // USART mode implemented?
-#define SERCOM1_USART_ISO7816 1 // USART ISO7816 mode implemented?
-#define SERCOM1_USART_LIN_MASTER 0 // USART LIN Master mode implemented?
-#define SERCOM1_USART_RS485 1 // USART RS485 mode implemented?
-
-#endif /* _SAML22_SERCOM1_INSTANCE_ */
+/** + * \file + * + * \brief Instance description for SERCOM1 + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAML22_SERCOM1_INSTANCE_ +#define _SAML22_SERCOM1_INSTANCE_ + +/* ========== Register definition for SERCOM1 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SERCOM1_I2CM_CTRLA (0x42000800) /**< \brief (SERCOM1) I2CM Control A */ +#define REG_SERCOM1_I2CM_CTRLB (0x42000804) /**< \brief (SERCOM1) I2CM Control B */ +#define REG_SERCOM1_I2CM_BAUD (0x4200080C) /**< \brief (SERCOM1) I2CM Baud Rate */ +#define REG_SERCOM1_I2CM_INTENCLR (0x42000814) /**< \brief (SERCOM1) I2CM Interrupt Enable Clear */ +#define REG_SERCOM1_I2CM_INTENSET (0x42000816) /**< \brief (SERCOM1) I2CM Interrupt Enable Set */ +#define REG_SERCOM1_I2CM_INTFLAG (0x42000818) /**< \brief (SERCOM1) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM1_I2CM_STATUS (0x4200081A) /**< \brief (SERCOM1) I2CM Status */ +#define REG_SERCOM1_I2CM_SYNCBUSY (0x4200081C) /**< \brief (SERCOM1) I2CM Synchronization Busy */ +#define REG_SERCOM1_I2CM_ADDR (0x42000824) /**< \brief (SERCOM1) I2CM Address */ +#define REG_SERCOM1_I2CM_DATA (0x42000828) /**< \brief (SERCOM1) I2CM Data */ +#define REG_SERCOM1_I2CM_DBGCTRL (0x42000830) /**< \brief (SERCOM1) I2CM Debug Control */ +#define REG_SERCOM1_I2CS_CTRLA (0x42000800) /**< \brief (SERCOM1) I2CS Control A */ +#define REG_SERCOM1_I2CS_CTRLB (0x42000804) /**< \brief (SERCOM1) I2CS Control B */ +#define REG_SERCOM1_I2CS_INTENCLR (0x42000814) /**< \brief (SERCOM1) I2CS Interrupt Enable Clear */ +#define REG_SERCOM1_I2CS_INTENSET (0x42000816) /**< \brief (SERCOM1) I2CS Interrupt Enable Set */ +#define REG_SERCOM1_I2CS_INTFLAG (0x42000818) /**< \brief (SERCOM1) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM1_I2CS_STATUS (0x4200081A) /**< \brief (SERCOM1) I2CS Status */ +#define REG_SERCOM1_I2CS_SYNCBUSY (0x4200081C) /**< \brief (SERCOM1) I2CS Synchronization Busy */ +#define REG_SERCOM1_I2CS_ADDR (0x42000824) /**< \brief (SERCOM1) I2CS Address */ +#define REG_SERCOM1_I2CS_DATA (0x42000828) /**< \brief (SERCOM1) I2CS Data */ +#define REG_SERCOM1_SPI_CTRLA (0x42000800) /**< \brief (SERCOM1) SPI Control A */ +#define REG_SERCOM1_SPI_CTRLB (0x42000804) /**< \brief (SERCOM1) SPI Control B */ +#define REG_SERCOM1_SPI_BAUD (0x4200080C) /**< \brief (SERCOM1) SPI Baud Rate */ +#define REG_SERCOM1_SPI_INTENCLR (0x42000814) /**< \brief (SERCOM1) SPI Interrupt Enable Clear */ +#define REG_SERCOM1_SPI_INTENSET (0x42000816) /**< \brief (SERCOM1) SPI Interrupt Enable Set */ +#define REG_SERCOM1_SPI_INTFLAG (0x42000818) /**< \brief (SERCOM1) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM1_SPI_STATUS (0x4200081A) /**< \brief (SERCOM1) SPI Status */ +#define REG_SERCOM1_SPI_SYNCBUSY (0x4200081C) /**< \brief (SERCOM1) SPI Synchronization Busy */ +#define REG_SERCOM1_SPI_ADDR (0x42000824) /**< \brief (SERCOM1) SPI Address */ +#define REG_SERCOM1_SPI_DATA (0x42000828) /**< \brief (SERCOM1) SPI Data */ +#define REG_SERCOM1_SPI_DBGCTRL (0x42000830) /**< \brief (SERCOM1) SPI Debug Control */ +#define REG_SERCOM1_USART_CTRLA (0x42000800) /**< \brief (SERCOM1) USART Control A */ +#define REG_SERCOM1_USART_CTRLB (0x42000804) /**< \brief (SERCOM1) USART Control B */ +#define REG_SERCOM1_USART_CTRLC (0x42000808) /**< \brief (SERCOM1) USART Control C */ +#define REG_SERCOM1_USART_BAUD (0x4200080C) /**< \brief (SERCOM1) USART Baud Rate */ +#define REG_SERCOM1_USART_RXPL (0x4200080E) /**< \brief (SERCOM1) USART Receive Pulse Length */ +#define REG_SERCOM1_USART_INTENCLR (0x42000814) /**< \brief (SERCOM1) USART Interrupt Enable Clear */ +#define REG_SERCOM1_USART_INTENSET (0x42000816) /**< \brief (SERCOM1) USART Interrupt Enable Set */ +#define REG_SERCOM1_USART_INTFLAG (0x42000818) /**< \brief (SERCOM1) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM1_USART_STATUS (0x4200081A) /**< \brief (SERCOM1) USART Status */ +#define REG_SERCOM1_USART_SYNCBUSY (0x4200081C) /**< \brief (SERCOM1) USART Synchronization Busy */ +#define REG_SERCOM1_USART_RXERRCNT (0x42000820) /**< \brief (SERCOM1) USART Receive Error Count */ +#define REG_SERCOM1_USART_DATA (0x42000828) /**< \brief (SERCOM1) USART Data */ +#define REG_SERCOM1_USART_DBGCTRL (0x42000830) /**< \brief (SERCOM1) USART Debug Control */ +#else +#define REG_SERCOM1_I2CM_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM1) I2CM Control A */ +#define REG_SERCOM1_I2CM_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM1) I2CM Control B */ +#define REG_SERCOM1_I2CM_BAUD (*(RwReg *)0x4200080CUL) /**< \brief (SERCOM1) I2CM Baud Rate */ +#define REG_SERCOM1_I2CM_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM1) I2CM Interrupt Enable Clear */ +#define REG_SERCOM1_I2CM_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM1) I2CM Interrupt Enable Set */ +#define REG_SERCOM1_I2CM_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM1) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM1_I2CM_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM1) I2CM Status */ +#define REG_SERCOM1_I2CM_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM1) I2CM Synchronization Busy */ +#define REG_SERCOM1_I2CM_ADDR (*(RwReg *)0x42000824UL) /**< \brief (SERCOM1) I2CM Address */ +#define REG_SERCOM1_I2CM_DATA (*(RwReg8 *)0x42000828UL) /**< \brief (SERCOM1) I2CM Data */ +#define REG_SERCOM1_I2CM_DBGCTRL (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM1) I2CM Debug Control */ +#define REG_SERCOM1_I2CS_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM1) I2CS Control A */ +#define REG_SERCOM1_I2CS_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM1) I2CS Control B */ +#define REG_SERCOM1_I2CS_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM1) I2CS Interrupt Enable Clear */ +#define REG_SERCOM1_I2CS_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM1) I2CS Interrupt Enable Set */ +#define REG_SERCOM1_I2CS_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM1) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM1_I2CS_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM1) I2CS Status */ +#define REG_SERCOM1_I2CS_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM1) I2CS Synchronization Busy */ +#define REG_SERCOM1_I2CS_ADDR (*(RwReg *)0x42000824UL) /**< \brief (SERCOM1) I2CS Address */ +#define REG_SERCOM1_I2CS_DATA (*(RwReg8 *)0x42000828UL) /**< \brief (SERCOM1) I2CS Data */ +#define REG_SERCOM1_SPI_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM1) SPI Control A */ +#define REG_SERCOM1_SPI_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM1) SPI Control B */ +#define REG_SERCOM1_SPI_BAUD (*(RwReg8 *)0x4200080CUL) /**< \brief (SERCOM1) SPI Baud Rate */ +#define REG_SERCOM1_SPI_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM1) SPI Interrupt Enable Clear */ +#define REG_SERCOM1_SPI_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM1) SPI Interrupt Enable Set */ +#define REG_SERCOM1_SPI_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM1) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM1_SPI_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM1) SPI Status */ +#define REG_SERCOM1_SPI_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM1) SPI Synchronization Busy */ +#define REG_SERCOM1_SPI_ADDR (*(RwReg *)0x42000824UL) /**< \brief (SERCOM1) SPI Address */ +#define REG_SERCOM1_SPI_DATA (*(RwReg *)0x42000828UL) /**< \brief (SERCOM1) SPI Data */ +#define REG_SERCOM1_SPI_DBGCTRL (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM1) SPI Debug Control */ +#define REG_SERCOM1_USART_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM1) USART Control A */ +#define REG_SERCOM1_USART_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM1) USART Control B */ +#define REG_SERCOM1_USART_CTRLC (*(RwReg *)0x42000808UL) /**< \brief (SERCOM1) USART Control C */ +#define REG_SERCOM1_USART_BAUD (*(RwReg16*)0x4200080CUL) /**< \brief (SERCOM1) USART Baud Rate */ +#define REG_SERCOM1_USART_RXPL (*(RwReg8 *)0x4200080EUL) /**< \brief (SERCOM1) USART Receive Pulse Length */ +#define REG_SERCOM1_USART_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM1) USART Interrupt Enable Clear */ +#define REG_SERCOM1_USART_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM1) USART Interrupt Enable Set */ +#define REG_SERCOM1_USART_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM1) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM1_USART_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM1) USART Status */ +#define REG_SERCOM1_USART_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM1) USART Synchronization Busy */ +#define REG_SERCOM1_USART_RXERRCNT (*(RoReg8 *)0x42000820UL) /**< \brief (SERCOM1) USART Receive Error Count */ +#define REG_SERCOM1_USART_DATA (*(RwReg16*)0x42000828UL) /**< \brief (SERCOM1) USART Data */ +#define REG_SERCOM1_USART_DBGCTRL (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM1) USART Debug Control */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/* ========== Instance parameters for SERCOM1 peripheral ========== */ +#define SERCOM1_DMAC_ID_RX 4 // Index of DMA RX trigger +#define SERCOM1_DMAC_ID_TX 5 // Index of DMA TX trigger +#define SERCOM1_GCLK_ID_CORE 17 +#define SERCOM1_GCLK_ID_SLOW 15 +#define SERCOM1_INT_MSB 6 +#define SERCOM1_PMSB 3 +#define SERCOM1_SPI 1 // SPI mode implemented? +#define SERCOM1_TWIM 1 // TWI Master mode implemented? +#define SERCOM1_TWIS 1 // TWI Slave mode implemented? +#define SERCOM1_TWI_HSMODE 1 // TWI HighSpeed mode implemented? +#define SERCOM1_USART 1 // USART mode implemented? +#define SERCOM1_USART_ISO7816 1 // USART ISO7816 mode implemented? +#define SERCOM1_USART_LIN_MASTER 0 // USART LIN Master mode implemented? +#define SERCOM1_USART_RS485 1 // USART RS485 mode implemented? + +#endif /* _SAML22_SERCOM1_INSTANCE_ */ |