summaryrefslogtreecommitdiffstats
path: root/Sensor Watch Starter Project/include/instance/sercom3.h
diff options
context:
space:
mode:
Diffstat (limited to 'Sensor Watch Starter Project/include/instance/sercom3.h')
-rw-r--r--[-rwxr-xr-x]Sensor Watch Starter Project/include/instance/sercom3.h298
1 files changed, 142 insertions, 156 deletions
diff --git a/Sensor Watch Starter Project/include/instance/sercom3.h b/Sensor Watch Starter Project/include/instance/sercom3.h
index 2d310a73..f7256e22 100755..100644
--- a/Sensor Watch Starter Project/include/instance/sercom3.h
+++ b/Sensor Watch Starter Project/include/instance/sercom3.h
@@ -1,156 +1,142 @@
-/**
- * \file
- *
- * \brief Instance description for SERCOM3
- *
- * Copyright (c) 2015 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- * Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _SAML22_SERCOM3_INSTANCE_
-#define _SAML22_SERCOM3_INSTANCE_
-
-/* ========== Register definition for SERCOM3 peripheral ========== */
-#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-#define REG_SERCOM3_I2CM_CTRLA (0x42001000U) /**< \brief (SERCOM3) I2CM Control A */
-#define REG_SERCOM3_I2CM_CTRLB (0x42001004U) /**< \brief (SERCOM3) I2CM Control B */
-#define REG_SERCOM3_I2CM_BAUD (0x4200100CU) /**< \brief (SERCOM3) I2CM Baud Rate */
-#define REG_SERCOM3_I2CM_INTENCLR (0x42001014U) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */
-#define REG_SERCOM3_I2CM_INTENSET (0x42001016U) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */
-#define REG_SERCOM3_I2CM_INTFLAG (0x42001018U) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */
-#define REG_SERCOM3_I2CM_STATUS (0x4200101AU) /**< \brief (SERCOM3) I2CM Status */
-#define REG_SERCOM3_I2CM_SYNCBUSY (0x4200101CU) /**< \brief (SERCOM3) I2CM Synchronization Busy */
-#define REG_SERCOM3_I2CM_ADDR (0x42001024U) /**< \brief (SERCOM3) I2CM Address */
-#define REG_SERCOM3_I2CM_DATA (0x42001028U) /**< \brief (SERCOM3) I2CM Data */
-#define REG_SERCOM3_I2CM_DBGCTRL (0x42001030U) /**< \brief (SERCOM3) I2CM Debug Control */
-#define REG_SERCOM3_I2CS_CTRLA (0x42001000U) /**< \brief (SERCOM3) I2CS Control A */
-#define REG_SERCOM3_I2CS_CTRLB (0x42001004U) /**< \brief (SERCOM3) I2CS Control B */
-#define REG_SERCOM3_I2CS_INTENCLR (0x42001014U) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */
-#define REG_SERCOM3_I2CS_INTENSET (0x42001016U) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */
-#define REG_SERCOM3_I2CS_INTFLAG (0x42001018U) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */
-#define REG_SERCOM3_I2CS_STATUS (0x4200101AU) /**< \brief (SERCOM3) I2CS Status */
-#define REG_SERCOM3_I2CS_SYNCBUSY (0x4200101CU) /**< \brief (SERCOM3) I2CS Synchronization Busy */
-#define REG_SERCOM3_I2CS_ADDR (0x42001024U) /**< \brief (SERCOM3) I2CS Address */
-#define REG_SERCOM3_I2CS_DATA (0x42001028U) /**< \brief (SERCOM3) I2CS Data */
-#define REG_SERCOM3_SPI_CTRLA (0x42001000U) /**< \brief (SERCOM3) SPI Control A */
-#define REG_SERCOM3_SPI_CTRLB (0x42001004U) /**< \brief (SERCOM3) SPI Control B */
-#define REG_SERCOM3_SPI_BAUD (0x4200100CU) /**< \brief (SERCOM3) SPI Baud Rate */
-#define REG_SERCOM3_SPI_INTENCLR (0x42001014U) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */
-#define REG_SERCOM3_SPI_INTENSET (0x42001016U) /**< \brief (SERCOM3) SPI Interrupt Enable Set */
-#define REG_SERCOM3_SPI_INTFLAG (0x42001018U) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */
-#define REG_SERCOM3_SPI_STATUS (0x4200101AU) /**< \brief (SERCOM3) SPI Status */
-#define REG_SERCOM3_SPI_SYNCBUSY (0x4200101CU) /**< \brief (SERCOM3) SPI Synchronization Busy */
-#define REG_SERCOM3_SPI_ADDR (0x42001024U) /**< \brief (SERCOM3) SPI Address */
-#define REG_SERCOM3_SPI_DATA (0x42001028U) /**< \brief (SERCOM3) SPI Data */
-#define REG_SERCOM3_SPI_DBGCTRL (0x42001030U) /**< \brief (SERCOM3) SPI Debug Control */
-#define REG_SERCOM3_USART_CTRLA (0x42001000U) /**< \brief (SERCOM3) USART Control A */
-#define REG_SERCOM3_USART_CTRLB (0x42001004U) /**< \brief (SERCOM3) USART Control B */
-#define REG_SERCOM3_USART_CTRLC (0x42001008U) /**< \brief (SERCOM3) USART Control C */
-#define REG_SERCOM3_USART_BAUD (0x4200100CU) /**< \brief (SERCOM3) USART Baud Rate */
-#define REG_SERCOM3_USART_RXPL (0x4200100EU) /**< \brief (SERCOM3) USART Receive Pulse Length */
-#define REG_SERCOM3_USART_INTENCLR (0x42001014U) /**< \brief (SERCOM3) USART Interrupt Enable Clear */
-#define REG_SERCOM3_USART_INTENSET (0x42001016U) /**< \brief (SERCOM3) USART Interrupt Enable Set */
-#define REG_SERCOM3_USART_INTFLAG (0x42001018U) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */
-#define REG_SERCOM3_USART_STATUS (0x4200101AU) /**< \brief (SERCOM3) USART Status */
-#define REG_SERCOM3_USART_SYNCBUSY (0x4200101CU) /**< \brief (SERCOM3) USART Synchronization Busy */
-#define REG_SERCOM3_USART_RXERRCNT (0x42001020U) /**< \brief (SERCOM3) USART Receive Error Count */
-#define REG_SERCOM3_USART_DATA (0x42001028U) /**< \brief (SERCOM3) USART Data */
-#define REG_SERCOM3_USART_DBGCTRL (0x42001030U) /**< \brief (SERCOM3) USART Debug Control */
-#else
-#define REG_SERCOM3_I2CM_CTRLA (*(RwReg *)0x42001000U) /**< \brief (SERCOM3) I2CM Control A */
-#define REG_SERCOM3_I2CM_CTRLB (*(RwReg *)0x42001004U) /**< \brief (SERCOM3) I2CM Control B */
-#define REG_SERCOM3_I2CM_BAUD (*(RwReg *)0x4200100CU) /**< \brief (SERCOM3) I2CM Baud Rate */
-#define REG_SERCOM3_I2CM_INTENCLR (*(RwReg8 *)0x42001014U) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */
-#define REG_SERCOM3_I2CM_INTENSET (*(RwReg8 *)0x42001016U) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */
-#define REG_SERCOM3_I2CM_INTFLAG (*(RwReg8 *)0x42001018U) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */
-#define REG_SERCOM3_I2CM_STATUS (*(RwReg16*)0x4200101AU) /**< \brief (SERCOM3) I2CM Status */
-#define REG_SERCOM3_I2CM_SYNCBUSY (*(RoReg *)0x4200101CU) /**< \brief (SERCOM3) I2CM Synchronization Busy */
-#define REG_SERCOM3_I2CM_ADDR (*(RwReg *)0x42001024U) /**< \brief (SERCOM3) I2CM Address */
-#define REG_SERCOM3_I2CM_DATA (*(RwReg8 *)0x42001028U) /**< \brief (SERCOM3) I2CM Data */
-#define REG_SERCOM3_I2CM_DBGCTRL (*(RwReg8 *)0x42001030U) /**< \brief (SERCOM3) I2CM Debug Control */
-#define REG_SERCOM3_I2CS_CTRLA (*(RwReg *)0x42001000U) /**< \brief (SERCOM3) I2CS Control A */
-#define REG_SERCOM3_I2CS_CTRLB (*(RwReg *)0x42001004U) /**< \brief (SERCOM3) I2CS Control B */
-#define REG_SERCOM3_I2CS_INTENCLR (*(RwReg8 *)0x42001014U) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */
-#define REG_SERCOM3_I2CS_INTENSET (*(RwReg8 *)0x42001016U) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */
-#define REG_SERCOM3_I2CS_INTFLAG (*(RwReg8 *)0x42001018U) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */
-#define REG_SERCOM3_I2CS_STATUS (*(RwReg16*)0x4200101AU) /**< \brief (SERCOM3) I2CS Status */
-#define REG_SERCOM3_I2CS_SYNCBUSY (*(RoReg *)0x4200101CU) /**< \brief (SERCOM3) I2CS Synchronization Busy */
-#define REG_SERCOM3_I2CS_ADDR (*(RwReg *)0x42001024U) /**< \brief (SERCOM3) I2CS Address */
-#define REG_SERCOM3_I2CS_DATA (*(RwReg8 *)0x42001028U) /**< \brief (SERCOM3) I2CS Data */
-#define REG_SERCOM3_SPI_CTRLA (*(RwReg *)0x42001000U) /**< \brief (SERCOM3) SPI Control A */
-#define REG_SERCOM3_SPI_CTRLB (*(RwReg *)0x42001004U) /**< \brief (SERCOM3) SPI Control B */
-#define REG_SERCOM3_SPI_BAUD (*(RwReg8 *)0x4200100CU) /**< \brief (SERCOM3) SPI Baud Rate */
-#define REG_SERCOM3_SPI_INTENCLR (*(RwReg8 *)0x42001014U) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */
-#define REG_SERCOM3_SPI_INTENSET (*(RwReg8 *)0x42001016U) /**< \brief (SERCOM3) SPI Interrupt Enable Set */
-#define REG_SERCOM3_SPI_INTFLAG (*(RwReg8 *)0x42001018U) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */
-#define REG_SERCOM3_SPI_STATUS (*(RwReg16*)0x4200101AU) /**< \brief (SERCOM3) SPI Status */
-#define REG_SERCOM3_SPI_SYNCBUSY (*(RoReg *)0x4200101CU) /**< \brief (SERCOM3) SPI Synchronization Busy */
-#define REG_SERCOM3_SPI_ADDR (*(RwReg *)0x42001024U) /**< \brief (SERCOM3) SPI Address */
-#define REG_SERCOM3_SPI_DATA (*(RwReg *)0x42001028U) /**< \brief (SERCOM3) SPI Data */
-#define REG_SERCOM3_SPI_DBGCTRL (*(RwReg8 *)0x42001030U) /**< \brief (SERCOM3) SPI Debug Control */
-#define REG_SERCOM3_USART_CTRLA (*(RwReg *)0x42001000U) /**< \brief (SERCOM3) USART Control A */
-#define REG_SERCOM3_USART_CTRLB (*(RwReg *)0x42001004U) /**< \brief (SERCOM3) USART Control B */
-#define REG_SERCOM3_USART_CTRLC (*(RwReg *)0x42001008U) /**< \brief (SERCOM3) USART Control C */
-#define REG_SERCOM3_USART_BAUD (*(RwReg16*)0x4200100CU) /**< \brief (SERCOM3) USART Baud Rate */
-#define REG_SERCOM3_USART_RXPL (*(RwReg8 *)0x4200100EU) /**< \brief (SERCOM3) USART Receive Pulse Length */
-#define REG_SERCOM3_USART_INTENCLR (*(RwReg8 *)0x42001014U) /**< \brief (SERCOM3) USART Interrupt Enable Clear */
-#define REG_SERCOM3_USART_INTENSET (*(RwReg8 *)0x42001016U) /**< \brief (SERCOM3) USART Interrupt Enable Set */
-#define REG_SERCOM3_USART_INTFLAG (*(RwReg8 *)0x42001018U) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */
-#define REG_SERCOM3_USART_STATUS (*(RwReg16*)0x4200101AU) /**< \brief (SERCOM3) USART Status */
-#define REG_SERCOM3_USART_SYNCBUSY (*(RoReg *)0x4200101CU) /**< \brief (SERCOM3) USART Synchronization Busy */
-#define REG_SERCOM3_USART_RXERRCNT (*(RoReg8 *)0x42001020U) /**< \brief (SERCOM3) USART Receive Error Count */
-#define REG_SERCOM3_USART_DATA (*(RwReg16*)0x42001028U) /**< \brief (SERCOM3) USART Data */
-#define REG_SERCOM3_USART_DBGCTRL (*(RwReg8 *)0x42001030U) /**< \brief (SERCOM3) USART Debug Control */
-#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-/* ========== Instance parameters for SERCOM3 peripheral ========== */
-#define SERCOM3_DMAC_ID_RX 8 // Index of DMA RX trigger
-#define SERCOM3_DMAC_ID_TX 9 // Index of DMA TX trigger
-#define SERCOM3_GCLK_ID_CORE 19
-#define SERCOM3_GCLK_ID_SLOW 15
-#define SERCOM3_INT_MSB 6
-#define SERCOM3_PMSB 3
-#define SERCOM3_SPI 1 // SPI mode implemented?
-#define SERCOM3_TWIM 1 // TWI Master mode implemented?
-#define SERCOM3_TWIS 1 // TWI Slave mode implemented?
-#define SERCOM3_TWI_HSMODE 0 // TWI HighSpeed mode implemented?
-#define SERCOM3_USART 1 // USART mode implemented?
-#define SERCOM3_USART_ISO7816 1 // USART ISO7816 mode implemented?
-#define SERCOM3_USART_LIN_MASTER 0 // USART LIN Master mode implemented?
-#define SERCOM3_USART_RS485 1 // USART RS485 mode implemented?
-
-#endif /* _SAML22_SERCOM3_INSTANCE_ */
+/**
+ * \file
+ *
+ * \brief Instance description for SERCOM3
+ *
+ * Copyright (c) 2018 Microchip Technology Inc.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the Licence at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef _SAML22_SERCOM3_INSTANCE_
+#define _SAML22_SERCOM3_INSTANCE_
+
+/* ========== Register definition for SERCOM3 peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_SERCOM3_I2CM_CTRLA (0x42001000) /**< \brief (SERCOM3) I2CM Control A */
+#define REG_SERCOM3_I2CM_CTRLB (0x42001004) /**< \brief (SERCOM3) I2CM Control B */
+#define REG_SERCOM3_I2CM_BAUD (0x4200100C) /**< \brief (SERCOM3) I2CM Baud Rate */
+#define REG_SERCOM3_I2CM_INTENCLR (0x42001014) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */
+#define REG_SERCOM3_I2CM_INTENSET (0x42001016) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */
+#define REG_SERCOM3_I2CM_INTFLAG (0x42001018) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */
+#define REG_SERCOM3_I2CM_STATUS (0x4200101A) /**< \brief (SERCOM3) I2CM Status */
+#define REG_SERCOM3_I2CM_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) I2CM Synchronization Busy */
+#define REG_SERCOM3_I2CM_ADDR (0x42001024) /**< \brief (SERCOM3) I2CM Address */
+#define REG_SERCOM3_I2CM_DATA (0x42001028) /**< \brief (SERCOM3) I2CM Data */
+#define REG_SERCOM3_I2CM_DBGCTRL (0x42001030) /**< \brief (SERCOM3) I2CM Debug Control */
+#define REG_SERCOM3_I2CS_CTRLA (0x42001000) /**< \brief (SERCOM3) I2CS Control A */
+#define REG_SERCOM3_I2CS_CTRLB (0x42001004) /**< \brief (SERCOM3) I2CS Control B */
+#define REG_SERCOM3_I2CS_INTENCLR (0x42001014) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */
+#define REG_SERCOM3_I2CS_INTENSET (0x42001016) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */
+#define REG_SERCOM3_I2CS_INTFLAG (0x42001018) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */
+#define REG_SERCOM3_I2CS_STATUS (0x4200101A) /**< \brief (SERCOM3) I2CS Status */
+#define REG_SERCOM3_I2CS_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) I2CS Synchronization Busy */
+#define REG_SERCOM3_I2CS_ADDR (0x42001024) /**< \brief (SERCOM3) I2CS Address */
+#define REG_SERCOM3_I2CS_DATA (0x42001028) /**< \brief (SERCOM3) I2CS Data */
+#define REG_SERCOM3_SPI_CTRLA (0x42001000) /**< \brief (SERCOM3) SPI Control A */
+#define REG_SERCOM3_SPI_CTRLB (0x42001004) /**< \brief (SERCOM3) SPI Control B */
+#define REG_SERCOM3_SPI_BAUD (0x4200100C) /**< \brief (SERCOM3) SPI Baud Rate */
+#define REG_SERCOM3_SPI_INTENCLR (0x42001014) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */
+#define REG_SERCOM3_SPI_INTENSET (0x42001016) /**< \brief (SERCOM3) SPI Interrupt Enable Set */
+#define REG_SERCOM3_SPI_INTFLAG (0x42001018) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */
+#define REG_SERCOM3_SPI_STATUS (0x4200101A) /**< \brief (SERCOM3) SPI Status */
+#define REG_SERCOM3_SPI_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) SPI Synchronization Busy */
+#define REG_SERCOM3_SPI_ADDR (0x42001024) /**< \brief (SERCOM3) SPI Address */
+#define REG_SERCOM3_SPI_DATA (0x42001028) /**< \brief (SERCOM3) SPI Data */
+#define REG_SERCOM3_SPI_DBGCTRL (0x42001030) /**< \brief (SERCOM3) SPI Debug Control */
+#define REG_SERCOM3_USART_CTRLA (0x42001000) /**< \brief (SERCOM3) USART Control A */
+#define REG_SERCOM3_USART_CTRLB (0x42001004) /**< \brief (SERCOM3) USART Control B */
+#define REG_SERCOM3_USART_CTRLC (0x42001008) /**< \brief (SERCOM3) USART Control C */
+#define REG_SERCOM3_USART_BAUD (0x4200100C) /**< \brief (SERCOM3) USART Baud Rate */
+#define REG_SERCOM3_USART_RXPL (0x4200100E) /**< \brief (SERCOM3) USART Receive Pulse Length */
+#define REG_SERCOM3_USART_INTENCLR (0x42001014) /**< \brief (SERCOM3) USART Interrupt Enable Clear */
+#define REG_SERCOM3_USART_INTENSET (0x42001016) /**< \brief (SERCOM3) USART Interrupt Enable Set */
+#define REG_SERCOM3_USART_INTFLAG (0x42001018) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */
+#define REG_SERCOM3_USART_STATUS (0x4200101A) /**< \brief (SERCOM3) USART Status */
+#define REG_SERCOM3_USART_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) USART Synchronization Busy */
+#define REG_SERCOM3_USART_RXERRCNT (0x42001020) /**< \brief (SERCOM3) USART Receive Error Count */
+#define REG_SERCOM3_USART_DATA (0x42001028) /**< \brief (SERCOM3) USART Data */
+#define REG_SERCOM3_USART_DBGCTRL (0x42001030) /**< \brief (SERCOM3) USART Debug Control */
+#else
+#define REG_SERCOM3_I2CM_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) I2CM Control A */
+#define REG_SERCOM3_I2CM_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) I2CM Control B */
+#define REG_SERCOM3_I2CM_BAUD (*(RwReg *)0x4200100CUL) /**< \brief (SERCOM3) I2CM Baud Rate */
+#define REG_SERCOM3_I2CM_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */
+#define REG_SERCOM3_I2CM_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */
+#define REG_SERCOM3_I2CM_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */
+#define REG_SERCOM3_I2CM_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) I2CM Status */
+#define REG_SERCOM3_I2CM_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) I2CM Synchronization Busy */
+#define REG_SERCOM3_I2CM_ADDR (*(RwReg *)0x42001024UL) /**< \brief (SERCOM3) I2CM Address */
+#define REG_SERCOM3_I2CM_DATA (*(RwReg8 *)0x42001028UL) /**< \brief (SERCOM3) I2CM Data */
+#define REG_SERCOM3_I2CM_DBGCTRL (*(RwReg8 *)0x42001030UL) /**< \brief (SERCOM3) I2CM Debug Control */
+#define REG_SERCOM3_I2CS_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) I2CS Control A */
+#define REG_SERCOM3_I2CS_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) I2CS Control B */
+#define REG_SERCOM3_I2CS_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */
+#define REG_SERCOM3_I2CS_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */
+#define REG_SERCOM3_I2CS_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */
+#define REG_SERCOM3_I2CS_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) I2CS Status */
+#define REG_SERCOM3_I2CS_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) I2CS Synchronization Busy */
+#define REG_SERCOM3_I2CS_ADDR (*(RwReg *)0x42001024UL) /**< \brief (SERCOM3) I2CS Address */
+#define REG_SERCOM3_I2CS_DATA (*(RwReg8 *)0x42001028UL) /**< \brief (SERCOM3) I2CS Data */
+#define REG_SERCOM3_SPI_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) SPI Control A */
+#define REG_SERCOM3_SPI_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) SPI Control B */
+#define REG_SERCOM3_SPI_BAUD (*(RwReg8 *)0x4200100CUL) /**< \brief (SERCOM3) SPI Baud Rate */
+#define REG_SERCOM3_SPI_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */
+#define REG_SERCOM3_SPI_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) SPI Interrupt Enable Set */
+#define REG_SERCOM3_SPI_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */
+#define REG_SERCOM3_SPI_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) SPI Status */
+#define REG_SERCOM3_SPI_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) SPI Synchronization Busy */
+#define REG_SERCOM3_SPI_ADDR (*(RwReg *)0x42001024UL) /**< \brief (SERCOM3) SPI Address */
+#define REG_SERCOM3_SPI_DATA (*(RwReg *)0x42001028UL) /**< \brief (SERCOM3) SPI Data */
+#define REG_SERCOM3_SPI_DBGCTRL (*(RwReg8 *)0x42001030UL) /**< \brief (SERCOM3) SPI Debug Control */
+#define REG_SERCOM3_USART_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) USART Control A */
+#define REG_SERCOM3_USART_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) USART Control B */
+#define REG_SERCOM3_USART_CTRLC (*(RwReg *)0x42001008UL) /**< \brief (SERCOM3) USART Control C */
+#define REG_SERCOM3_USART_BAUD (*(RwReg16*)0x4200100CUL) /**< \brief (SERCOM3) USART Baud Rate */
+#define REG_SERCOM3_USART_RXPL (*(RwReg8 *)0x4200100EUL) /**< \brief (SERCOM3) USART Receive Pulse Length */
+#define REG_SERCOM3_USART_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) USART Interrupt Enable Clear */
+#define REG_SERCOM3_USART_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) USART Interrupt Enable Set */
+#define REG_SERCOM3_USART_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */
+#define REG_SERCOM3_USART_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) USART Status */
+#define REG_SERCOM3_USART_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) USART Synchronization Busy */
+#define REG_SERCOM3_USART_RXERRCNT (*(RoReg8 *)0x42001020UL) /**< \brief (SERCOM3) USART Receive Error Count */
+#define REG_SERCOM3_USART_DATA (*(RwReg16*)0x42001028UL) /**< \brief (SERCOM3) USART Data */
+#define REG_SERCOM3_USART_DBGCTRL (*(RwReg8 *)0x42001030UL) /**< \brief (SERCOM3) USART Debug Control */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for SERCOM3 peripheral ========== */
+#define SERCOM3_DMAC_ID_RX 8 // Index of DMA RX trigger
+#define SERCOM3_DMAC_ID_TX 9 // Index of DMA TX trigger
+#define SERCOM3_GCLK_ID_CORE 19
+#define SERCOM3_GCLK_ID_SLOW 15
+#define SERCOM3_INT_MSB 6
+#define SERCOM3_PMSB 3
+#define SERCOM3_SPI 1 // SPI mode implemented?
+#define SERCOM3_TWIM 1 // TWI Master mode implemented?
+#define SERCOM3_TWIS 1 // TWI Slave mode implemented?
+#define SERCOM3_TWI_HSMODE 0 // TWI HighSpeed mode implemented?
+#define SERCOM3_USART 1 // USART mode implemented?
+#define SERCOM3_USART_ISO7816 1 // USART ISO7816 mode implemented?
+#define SERCOM3_USART_LIN_MASTER 0 // USART LIN Master mode implemented?
+#define SERCOM3_USART_RS485 1 // USART RS485 mode implemented?
+
+#endif /* _SAML22_SERCOM3_INSTANCE_ */
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-21 17:44:32 +0000