diff options
Diffstat (limited to 'tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h')
| -rwxr-xr-x | tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h | 118 |
1 files changed, 0 insertions, 118 deletions
diff --git a/tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h b/tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h deleted file mode 100755 index 44be5a0d..00000000 --- a/tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by compiler flags for flexibility -#ifndef CFG_TUSB_MCU -#error CFG_TUSB_MCU must be defined -#endif - -#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX -#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) -#else -#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE -#endif - -#ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE -#endif - -#ifndef CFG_TUSB_DEBUG -#define CFG_TUSB_DEBUG 0 -#endif - -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 - -/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. - * Tinyusb use follows macros to declare transferring memory so that they can be put - * into those specific section. - * e.g - * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) - * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) - */ -#ifndef CFG_TUSB_MEM_SECTION -#define CFG_TUSB_MEM_SECTION -#endif - -#ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) -#endif - -//-------------------------------------------------------------------- -// DEVICE CONFIGURATION -//-------------------------------------------------------------------- - -#ifndef CFG_TUD_ENDPOINT0_SIZE -#define CFG_TUD_ENDPOINT0_SIZE 64 -#endif - -//------------- CLASS -------------// -#define CFG_TUD_CDC 0 -#define CFG_TUD_MSC 0 -#define CFG_TUD_HID 0 -#define CFG_TUD_MIDI 0 -#define CFG_TUD_AUDIO 1 -#define CFG_TUD_VENDOR 0 - -//-------------------------------------------------------------------- -// AUDIO CLASS DRIVER CONFIGURATION -//-------------------------------------------------------------------- - -// Have a look into audio_device.h for all configurations - -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN - -#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1 -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - -#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup -#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup -#define CFG_TUD_AUDIO_EP_SZ_IN (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN - -#define CFG_TUD_AUDIO_ENABLE_ENCODING 1 -#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1 -#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value -#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX) -#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) - -#ifdef __cplusplus -} -#endif - -#endif /* _TUSB_CONFIG_H_ */ |