diff options
Diffstat (limited to 'tinyusb/examples/device/hid_multiple_interface')
5 files changed, 0 insertions, 546 deletions
diff --git a/tinyusb/examples/device/hid_multiple_interface/CMakeLists.txt b/tinyusb/examples/device/hid_multiple_interface/CMakeLists.txt deleted file mode 100755 index abc4d91d..00000000 --- a/tinyusb/examples/device/hid_multiple_interface/CMakeLists.txt +++ /dev/null @@ -1,28 +0,0 @@ -cmake_minimum_required(VERSION 3.5) - -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) - -# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT}) - -# Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - -add_executable(${PROJECT}) - -# Example source -target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) - -# Example include -target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) - -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/hid_multiple_interface/Makefile b/tinyusb/examples/device/hid_multiple_interface/Makefile deleted file mode 100755 index 69b633fe..00000000 --- a/tinyusb/examples/device/hid_multiple_interface/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -include ../../../tools/top.mk -include ../../make.mk - -INC += \ - src \ - $(TOP)/hw \ - -# Example source -EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) - -include ../../rules.mk diff --git a/tinyusb/examples/device/hid_multiple_interface/src/main.c b/tinyusb/examples/device/hid_multiple_interface/src/main.c deleted file mode 100755 index 7cb1d75a..00000000 --- a/tinyusb/examples/device/hid_multiple_interface/src/main.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include <stdlib.h> -#include <stdio.h> -#include <string.h> - -#include "bsp/board.h" -#include "tusb.h" - -//--------------------------------------------------------------------+ -// MACRO CONSTANT TYPEDEF PROTYPES -//--------------------------------------------------------------------+ - -// Interface index depends on the order in configuration descriptor -enum { - ITF_KEYBOARD = 0, - ITF_MOUSE = 1 -}; - -/* Blink pattern - * - 250 ms : device not mounted - * - 1000 ms : device mounted - * - 2500 ms : device is suspended - */ -enum { - BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 1000, - BLINK_SUSPENDED = 2500, -}; - -static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; - -void led_blinking_task(void); -void hid_task(void); - -/*------------- MAIN -------------*/ -int main(void) -{ - board_init(); - tusb_init(); - - while (1) - { - tud_task(); // tinyusb device task - led_blinking_task(); - - hid_task(); - } - - return 0; -} - -//--------------------------------------------------------------------+ -// Device callbacks -//--------------------------------------------------------------------+ - -// Invoked when device is mounted -void tud_mount_cb(void) -{ - blink_interval_ms = BLINK_MOUNTED; -} - -// Invoked when device is unmounted -void tud_umount_cb(void) -{ - blink_interval_ms = BLINK_NOT_MOUNTED; -} - -// Invoked when usb bus is suspended -// remote_wakeup_en : if host allow us to perform remote wakeup -// Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ - (void) remote_wakeup_en; - blink_interval_ms = BLINK_SUSPENDED; -} - -// Invoked when usb bus is resumed -void tud_resume_cb(void) -{ - blink_interval_ms = BLINK_MOUNTED; -} - -//--------------------------------------------------------------------+ -// USB HID -//--------------------------------------------------------------------+ - -void hid_task(void) -{ - // Poll every 10ms - const uint32_t interval_ms = 10; - static uint32_t start_ms = 0; - - if ( board_millis() - start_ms < interval_ms) return; // not enough time - start_ms += interval_ms; - - uint32_t const btn = board_button_read(); - - // Remote wakeup - if ( tud_suspended() && btn ) - { - // Wake up host if we are in suspend mode - // and REMOTE_WAKEUP feature is enabled by host - tud_remote_wakeup(); - } - - /*------------- Keyboard -------------*/ - if ( tud_hid_n_ready(ITF_KEYBOARD) ) - { - // use to avoid send multiple consecutive zero report for keyboard - static bool has_key = false; - - if ( btn ) - { - uint8_t keycode[6] = { 0 }; - keycode[0] = HID_KEY_A; - - tud_hid_n_keyboard_report(ITF_KEYBOARD, 0, 0, keycode); - - has_key = true; - }else - { - // send empty key report if previously has key pressed - if (has_key) tud_hid_n_keyboard_report(ITF_KEYBOARD, 0, 0, NULL); - has_key = false; - } - } - - /*------------- Mouse -------------*/ - if ( tud_hid_n_ready(ITF_MOUSE) ) - { - if ( btn ) - { - int8_t const delta = 5; - - // no button, right + down, no scroll pan - tud_hid_n_mouse_report(ITF_MOUSE, 0, 0x00, delta, delta, 0, 0); - } - } -} - - -// Invoked when received GET_REPORT control request -// Application must fill buffer report's content and return its length. -// Return zero will cause the stack to STALL request -uint16_t tud_hid_get_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) -{ - // TODO not Implemented - (void) itf; - (void) report_id; - (void) report_type; - (void) buffer; - (void) reqlen; - - return 0; -} - -// Invoked when received SET_REPORT control request or -// received data on OUT endpoint ( Report ID = 0, Type = 0 ) -void tud_hid_set_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) -{ - // TODO set LED based on CAPLOCK, NUMLOCK etc... - (void) itf; - (void) report_id; - (void) report_type; - (void) buffer; - (void) bufsize; -} - -//--------------------------------------------------------------------+ -// BLINKING TASK -//--------------------------------------------------------------------+ -void led_blinking_task(void) -{ - static uint32_t start_ms = 0; - static bool led_state = false; - - // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time - start_ms += blink_interval_ms; - - board_led_write(led_state); - led_state = 1 - led_state; // toggle -} diff --git a/tinyusb/examples/device/hid_multiple_interface/src/tusb_config.h b/tinyusb/examples/device/hid_multiple_interface/src/tusb_config.h deleted file mode 100755 index a0aa17a9..00000000 --- a/tinyusb/examples/device/hid_multiple_interface/src/tusb_config.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif - -// RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 -#endif - -// RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif -#endif - -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" -#endif - -#ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE -#endif - -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 - -/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. - * Tinyusb use follows macros to declare transferring memory so that they can be put - * into those specific section. - * e.g - * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) - * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) - */ -#ifndef CFG_TUSB_MEM_SECTION -#define CFG_TUSB_MEM_SECTION -#endif - -#ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) -#endif - -//-------------------------------------------------------------------- -// DEVICE CONFIGURATION -//-------------------------------------------------------------------- - -#ifndef CFG_TUD_ENDPOINT0_SIZE -#define CFG_TUD_ENDPOINT0_SIZE 64 -#endif - -//------------- CLASS -------------// -#define CFG_TUD_HID 2 -#define CFG_TUD_CDC 0 -#define CFG_TUD_MSC 0 -#define CFG_TUD_MIDI 0 -#define CFG_TUD_VENDOR 0 - -// HID buffer size Should be sufficient to hold ID (if any) + Data -#define CFG_TUD_HID_EP_BUFSIZE 8 - -#ifdef __cplusplus - } -#endif - -#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/hid_multiple_interface/src/usb_descriptors.c b/tinyusb/examples/device/hid_multiple_interface/src/usb_descriptors.c deleted file mode 100755 index 9eef2150..00000000 --- a/tinyusb/examples/device/hid_multiple_interface/src/usb_descriptors.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include "tusb.h" - -/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. - * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. - * - * Auto ProductID layout's Bitmap: - * [MSB] HID | MSC | CDC [LSB] - */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) - -//--------------------------------------------------------------------+ -// Device Descriptors -//--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = -{ - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, - .bDeviceClass = 0x00, - .bDeviceSubClass = 0x00, - .bDeviceProtocol = 0x00, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - - .idVendor = 0xCafe, - .idProduct = USB_PID, - .bcdDevice = 0x0100, - - .iManufacturer = 0x01, - .iProduct = 0x02, - .iSerialNumber = 0x03, - - .bNumConfigurations = 0x01 -}; - -// Invoked when received GET DEVICE DESCRIPTOR -// Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ - return (uint8_t const *) &desc_device; -} - -//--------------------------------------------------------------------+ -// HID Report Descriptor -//--------------------------------------------------------------------+ - -uint8_t const desc_hid_report1[] = -{ - TUD_HID_REPORT_DESC_KEYBOARD() -}; - -uint8_t const desc_hid_report2[] = -{ - TUD_HID_REPORT_DESC_MOUSE() -}; - -// Invoked when received GET HID REPORT DESCRIPTOR -// Application return pointer to descriptor -// Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) -{ - if (itf == 0) - { - return desc_hid_report1; - } - else if (itf == 1) - { - return desc_hid_report2; - } - - return NULL; -} - -//--------------------------------------------------------------------+ -// Configuration Descriptor -//--------------------------------------------------------------------+ - -enum -{ - ITF_NUM_HID1, - ITF_NUM_HID2, - ITF_NUM_TOTAL -}; - -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN + TUD_HID_DESC_LEN) - -#define EPNUM_HID1 0x81 -#define EPNUM_HID2 0x82 - -uint8_t const desc_configuration[] = -{ - // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), - - // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_HID1, 4, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report1), EPNUM_HID1, CFG_TUD_HID_EP_BUFSIZE, 10), - TUD_HID_DESCRIPTOR(ITF_NUM_HID2, 5, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report2), EPNUM_HID2, CFG_TUD_HID_EP_BUFSIZE, 10) -}; - -// Invoked when received GET CONFIGURATION DESCRIPTOR -// Application return pointer to descriptor -// Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ - (void) index; // for multiple configurations - return desc_configuration; -} - -//--------------------------------------------------------------------+ -// String Descriptors -//--------------------------------------------------------------------+ - -// array of pointer to string descriptors -char const* string_desc_arr [] = -{ - (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) - "TinyUSB", // 1: Manufacturer - "TinyUSB Device", // 2: Product - "123456", // 3: Serials, should use chip ID - "Keyboard Interface", // 4: Interface 1 String - "Mouse Interface", // 5: Interface 2 String -}; - -static uint16_t _desc_str[32]; - -// Invoked when received GET STRING DESCRIPTOR request -// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete -uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) -{ - (void) langid; - - uint8_t chr_count; - - if ( index == 0) - { - memcpy(&_desc_str[1], string_desc_arr[0], 2); - chr_count = 1; - }else - { - // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. - // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - - if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; - - const char* str = string_desc_arr[index]; - - // Cap at max char - chr_count = strlen(str); - if ( chr_count > 31 ) chr_count = 31; - - // Convert ASCII string into UTF-16 - for(uint8_t i=0; i<chr_count; i++) - { - _desc_str[1+i] = str[i]; - } - } - - // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); - - return _desc_str; -} |