diff options
Diffstat (limited to 'tinyusb/examples/device/midi_test/src')
| -rwxr-xr-x | tinyusb/examples/device/midi_test/src/main.c | 177 | ||||
| -rwxr-xr-x | tinyusb/examples/device/midi_test/src/tusb_config.h | 112 | ||||
| -rwxr-xr-x | tinyusb/examples/device/midi_test/src/usb_descriptors.c | 177 |
3 files changed, 466 insertions, 0 deletions
diff --git a/tinyusb/examples/device/midi_test/src/main.c b/tinyusb/examples/device/midi_test/src/main.c new file mode 100755 index 00000000..19374847 --- /dev/null +++ b/tinyusb/examples/device/midi_test/src/main.c @@ -0,0 +1,177 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +/* This MIDI example send sequence of note (on/off) repeatedly. To test on PC, you need to install + * synth software and midi connection management software. On + * - Linux (Ubuntu): install qsynth, qjackctl. Then connect TinyUSB output port to FLUID Synth input port + * - Windows: install MIDI-OX + * - MacOS: SimpleSynth + */ + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); +void midi_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + midi_task(); + } + + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// MIDI Task +//--------------------------------------------------------------------+ + +// Variable that holds the current position in the sequence. +uint32_t note_pos = 0; + +// Store example melody as an array of note values +uint8_t note_sequence[] = +{ + 74,78,81,86,90,93,98,102,57,61,66,69,73,78,81,85,88,92,97,100,97,92,88,85,81,78, + 74,69,66,62,57,62,66,69,74,78,81,86,90,93,97,102,97,93,90,85,81,78,73,68,64,61, + 56,61,64,68,74,78,81,86,90,93,98,102 +}; + +void midi_task(void) +{ + static uint32_t start_ms = 0; + + uint8_t const cable_num = 0; // MIDI jack associated with USB endpoint + uint8_t const channel = 0; // 0 for channel 1 + + // The MIDI interface always creates input and output port/jack descriptors + // regardless of these being used or not. Therefore incoming traffic should be read + // (possibly just discarded) to avoid the sender blocking in IO + uint8_t packet[4]; + while ( tud_midi_available() ) tud_midi_packet_read(packet); + + // send note periodically + if (board_millis() - start_ms < 286) return; // not enough time + start_ms += 286; + + // Previous positions in the note sequence. + int previous = note_pos - 1; + + // If we currently are at position 0, set the + // previous position to the last note in the sequence. + if (previous < 0) previous = sizeof(note_sequence) - 1; + + // Send Note On for current position at full velocity (127) on channel 1. + uint8_t note_on[3] = { 0x90 | channel, note_sequence[note_pos], 127 }; + tud_midi_stream_write(cable_num, note_on, 3); + + // Send Note Off for previous note. + uint8_t note_off[3] = { 0x80 | channel, note_sequence[previous], 0}; + tud_midi_stream_write(cable_num, note_off, 3); + + // Increment position + note_pos++; + + // If we are at the end of the sequence, start over. + if (note_pos >= sizeof(note_sequence)) note_pos = 0; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/midi_test/src/tusb_config.h b/tinyusb/examples/device/midi_test/src/tusb_config.h new file mode 100755 index 00000000..61b9b655 --- /dev/null +++ b/tinyusb/examples/device/midi_test/src/tusb_config.h @@ -0,0 +1,112 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 1 +#define CFG_TUD_VENDOR 0 + +// MIDI FIFO size of TX and RX +#define CFG_TUD_MIDI_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_MIDI_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/midi_test/src/usb_descriptors.c b/tinyusb/examples/device/midi_test/src/usb_descriptors.c new file mode 100755 index 00000000..9d92a775 --- /dev/null +++ b/tinyusb/examples/device/midi_test/src/usb_descriptors.c @@ -0,0 +1,177 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_MIDI = 0, + ITF_NUM_MIDI_STREAMING, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_MIDI_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_MIDI 0x02 +#else + #define EPNUM_MIDI 0x01 +#endif + +uint8_t const desc_fs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 64) +}; + +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 512) +}; +#endif + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} |