diff options
Diffstat (limited to 'tinyusb/examples')
199 files changed, 16045 insertions, 0 deletions
diff --git a/tinyusb/examples/device/99-tinyusb.rules b/tinyusb/examples/device/99-tinyusb.rules new file mode 100755 index 00000000..e6372ed5 --- /dev/null +++ b/tinyusb/examples/device/99-tinyusb.rules @@ -0,0 +1,14 @@ +# Copy this file to the location of your distribution's udev rules, for example on Ubuntu: +# sudo cp 99-tinyusb.rules /etc/udev/rules.d/ +# Then reload udev configuration by executing: +# sudo udevadm control --reload-rules +# sudo udevadm trigger + +# Check SUBSYSTEM +SUBSYSTEMS=="hidraw", KERNEL=="hidraw*", MODE="0666", GROUP="dialout" + +# Rule applies to all TinyUSB example +ATTRS{idVendor}=="cafe", MODE="0666", GROUP="dialout" + +# Rule to blacklist TinyUSB example from being manipulated by ModemManager. +SUBSYSTEMS=="usb", ATTRS{idVendor}=="cafe", ENV{ID_MM_DEVICE_IGNORE}="1" diff --git a/tinyusb/examples/device/CMakeLists.txt b/tinyusb/examples/device/CMakeLists.txt new file mode 100755 index 00000000..a0e4600f --- /dev/null +++ b/tinyusb/examples/device/CMakeLists.txt @@ -0,0 +1,27 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) + +project(tinyusb_device_examples) +family_initialize_project(tinyusb_device_examples ${CMAKE_CURRENT_LIST_DIR}) + +# family_add_subdirectory will filter what to actually add based on selected FAMILY +family_add_subdirectory(audio_4_channel_mic) +family_add_subdirectory(audio_test) +family_add_subdirectory(board_test) +family_add_subdirectory(cdc_dual_ports) +family_add_subdirectory(cdc_msc) +family_add_subdirectory(cdc_msc_freertos) +family_add_subdirectory(dfu) +family_add_subdirectory(dfu_runtime) +family_add_subdirectory(dynamic_configuration) +family_add_subdirectory(hid_composite) +family_add_subdirectory(hid_composite_freertos) +family_add_subdirectory(hid_generic_inout) +family_add_subdirectory(hid_multiple_interface) +family_add_subdirectory(midi_test) +family_add_subdirectory(msc_dual_lun) +family_add_subdirectory(net_lwip_webserver) +family_add_subdirectory(uac2_headset) +family_add_subdirectory(usbtmc) +family_add_subdirectory(webusb_serial) diff --git a/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11 b/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11 diff --git a/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X b/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X diff --git a/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMG b/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMG new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMG diff --git a/tinyusb/examples/device/audio_4_channel_mic/CMakeLists.txt b/tinyusb/examples/device/audio_4_channel_mic/CMakeLists.txt new file mode 100755 index 00000000..f6e10e2e --- /dev/null +++ b/tinyusb/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c +) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src +) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) diff --git a/tinyusb/examples/device/audio_4_channel_mic/Makefile b/tinyusb/examples/device/audio_4_channel_mic/Makefile new file mode 100755 index 00000000..5a455078 --- /dev/null +++ b/tinyusb/examples/device/audio_4_channel_mic/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/audio_4_channel_mic/src/main.c b/tinyusb/examples/device/audio_4_channel_mic/src/main.c new file mode 100755 index 00000000..983b87e5 --- /dev/null +++ b/tinyusb/examples/device/audio_4_channel_mic/src/main.c @@ -0,0 +1,458 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Reinhard Panhuber + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* plot_audio_samples.py requires following modules: + * $ sudo apt install libportaudio + * $ pip3 install sounddevice matplotlib + * + * Then run + * $ python3 plot_audio_samples.py + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +#ifndef AUDIO_SAMPLE_RATE +#define AUDIO_SAMPLE_RATE 48000 +#endif + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +// Audio controls +// Current states +bool mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 +uint16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 +uint32_t sampFreq; +uint8_t clkValid; + +// Range states +audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; // Volume range state +audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state + +// Audio test data +uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ/2]; // Ensure half word aligned + +void led_blinking_task(void); +void audio_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + // Init values + sampFreq = AUDIO_SAMPLE_RATE; + clkValid = 1; + + sampleFreqRng.wNumSubRanges = 1; + sampleFreqRng.subrange[0].bMin = AUDIO_SAMPLE_RATE; + sampleFreqRng.subrange[0].bMax = AUDIO_SAMPLE_RATE; + sampleFreqRng.subrange[0].bRes = 0; + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + audio_task(); + } + + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// AUDIO Task +//--------------------------------------------------------------------+ + +void audio_task(void) +{ + // Yet to be filled - e.g. put meas data into TX FIFOs etc. + asm("nop"); +} + +//--------------------------------------------------------------------+ +// Application Callback API Implementations +//--------------------------------------------------------------------+ + +// Invoked when audio class specific set request received for an EP +bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + (void) pBuff; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t ep = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) ep; + + return false; // Yet not implemented +} + +// Invoked when audio class specific set request received for an interface +bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + (void) pBuff; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) itf; + + return false; // Yet not implemented +} + +// Invoked when audio class specific set request received for an entity +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + (void) itf; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // If request is for our feature unit + if ( entityID == 2 ) + { + switch ( ctrlSel ) + { + case AUDIO_FU_CTRL_MUTE: + // Request uses format layout 1 + TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + + mute[channelNum] = ((audio_control_cur_1_t*) pBuff)->bCur; + + TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); + return true; + + case AUDIO_FU_CTRL_VOLUME: + // Request uses format layout 2 + TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + + volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur; + + TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); + return true; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an EP +bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t ep = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) ep; + + // return tud_control_xfer(rhport, p_request, &tmp, 1); + + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an interface +bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) itf; + + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an entity +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + // uint8_t itf = TU_U16_LOW(p_request->wIndex); // Since we have only one audio function implemented, we do not need the itf value + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // Input terminal (Microphone input) + if (entityID == 1) + { + switch ( ctrlSel ) + { + case AUDIO_TE_CTRL_CONNECTOR: + { + // The terminal connector control only has a get request with only the CUR attribute. + audio_desc_channel_cluster_t ret; + + // Those are dummy values for now + ret.bNrChannels = 1; + ret.bmChannelConfig = 0; + ret.iChannelNames = 0; + + TU_LOG2(" Get terminal connector\r\n"); + + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret)); + } + break; + + // Unknown/Unsupported control selector + default: + TU_BREAKPOINT(); + return false; + } + } + + // Feature unit + if (entityID == 2) + { + switch ( ctrlSel ) + { + case AUDIO_FU_CTRL_MUTE: + // Audio control mute cur parameter block consists of only one byte - we thus can send it right away + // There does not exist a range parameter block for mute + TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); + return tud_control_xfer(rhport, p_request, &mute[channelNum], 1); + + case AUDIO_FU_CTRL_VOLUME: + switch ( p_request->bRequest ) + { + case AUDIO_CS_REQ_CUR: + TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); + return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); + + case AUDIO_CS_REQ_RANGE: + TU_LOG2(" Get Volume range of channel: %u\r\n", channelNum); + + // Copy values - only for testing - better is version below + audio_control_range_2_n_t(1) + ret; + + ret.wNumSubRanges = 1; + ret.subrange[0].bMin = -90; // -90 dB + ret.subrange[0].bMax = 90; // +90 dB + ret.subrange[0].bRes = 1; // 1 dB steps + + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret)); + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + // Clock Source unit + if ( entityID == 4 ) + { + switch ( ctrlSel ) + { + case AUDIO_CS_CTRL_SAM_FREQ: + // channelNum is always zero in this case + switch ( p_request->bRequest ) + { + case AUDIO_CS_REQ_CUR: + TU_LOG2(" Get Sample Freq.\r\n"); + return tud_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); + + case AUDIO_CS_REQ_RANGE: + TU_LOG2(" Get Sample Freq. range\r\n"); + return tud_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng)); + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + case AUDIO_CS_CTRL_CLK_VALID: + // Only cur attribute exists for this request + TU_LOG2(" Get Sample Freq. valid\r\n"); + return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + TU_LOG2(" Unsupported entity: %d\r\n", entityID); + return false; // Yet not implemented +} + +bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting) +{ + (void) rhport; + (void) itf; + (void) ep_in; + (void) cur_alt_setting; + + for (uint8_t cnt=0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++) + { + tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX); + } + + return true; +} + +bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting) +{ + (void) rhport; + (void) n_bytes_copied; + (void) itf; + (void) ep_in; + (void) cur_alt_setting; + + uint16_t dataVal; + + // Generate dummy data + for (uint16_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++) + { + uint16_t * p_buff = i2s_dummy_buffer[cnt]; // 2 bytes per sample + dataVal = 1; + for (uint16_t cnt2 = 0; cnt2 < AUDIO_SAMPLE_RATE/1000; cnt2++) + { + for (uint8_t cnt3 = 0; cnt3 < CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX; cnt3++) + { + *p_buff++ = dataVal; + } + dataVal++; + } + } + return true; +} + +bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + (void) p_request; + + return true; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/audio_4_channel_mic/src/plot_audio_samples.py b/tinyusb/examples/device/audio_4_channel_mic/src/plot_audio_samples.py new file mode 100755 index 00000000..9ab15135 --- /dev/null +++ b/tinyusb/examples/device/audio_4_channel_mic/src/plot_audio_samples.py @@ -0,0 +1,34 @@ +import sounddevice as sd +import matplotlib.pyplot as plt +import numpy as np +import platform + +if __name__ == '__main__': + + # If you got "ValueError: No input device matching", that is because your PC name example device + # differently from tested list below. Uncomment the next line to see full list and try to pick correct one + # print(sd.query_devices()) + + fs = 48000 # Sample rate + duration = 100e-3 # Duration of recording + + if platform.system() == 'Windows': + # WDM-KS is needed since there are more than one MicNode device APIs (at least in Windows) + device = 'Microphone (MicNode_4_Ch), Windows WDM-KS' + elif platform.system() == 'Darwin': + device = 'MicNode_4_Ch' + else: + device ='default' + + myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=4, dtype='int16', device=device) + print('Waiting...') + sd.wait() # Wait until recording is finished + print('Done!') + + time = np.arange(0, duration, 1 / fs) # time vector + plt.plot(time, myrecording) + plt.xlabel('Time [s]') + plt.ylabel('Amplitude') + plt.title('MicNode 4 Channel') + plt.show() +
\ No newline at end of file diff --git a/tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h b/tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h new file mode 100755 index 00000000..44be5a0d --- /dev/null +++ b/tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -0,0 +1,118 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +#else +#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_AUDIO 1 +#define CFG_TUD_VENDOR 0 + +//-------------------------------------------------------------------- +// AUDIO CLASS DRIVER CONFIGURATION +//-------------------------------------------------------------------- + +// Have a look into audio_device.h for all configurations + +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN + +#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1 +#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 + +#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 +#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup +#define CFG_TUD_AUDIO_EP_SZ_IN (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN + +#define CFG_TUD_AUDIO_ENABLE_ENCODING 1 +#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1 +#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value +#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX) +#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) + +#ifdef __cplusplus +} +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/tinyusb/examples/device/audio_4_channel_mic/src/usb_descriptors.c new file mode 100755 index 00000000..93ec6e9f --- /dev/null +++ b/tinyusb/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -0,0 +1,160 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ +enum +{ + ITF_NUM_AUDIO_CONTROL = 0, + ITF_NUM_AUDIO_STREAMING, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_FOUR_CH_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX +// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number +// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... +#define EPNUM_AUDIO 0x03 +#else +#define EPNUM_AUDIO 0x01 +#endif + +uint8_t const desc_configuration[] = +{ + // Interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "PaniRCorp", // 1: Manufacturer + "MicNode_4_Ch", // 2: Product + "123458", // 3: Serials, should use chip ID + "UAC2", // 4: Audio Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Convert ASCII string into UTF-16 + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/audio_test/.skip.MCU_SAMD11 b/tinyusb/examples/device/audio_test/.skip.MCU_SAMD11 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/audio_test/.skip.MCU_SAMD11 diff --git a/tinyusb/examples/device/audio_test/.skip.MCU_SAME5X b/tinyusb/examples/device/audio_test/.skip.MCU_SAME5X new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/audio_test/.skip.MCU_SAME5X diff --git a/tinyusb/examples/device/audio_test/.skip.MCU_SAMG b/tinyusb/examples/device/audio_test/.skip.MCU_SAMG new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/audio_test/.skip.MCU_SAMG diff --git a/tinyusb/examples/device/audio_test/CMakeLists.txt b/tinyusb/examples/device/audio_test/CMakeLists.txt new file mode 100755 index 00000000..cb321f9a --- /dev/null +++ b/tinyusb/examples/device/audio_test/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c +) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src +) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/audio_test/Makefile b/tinyusb/examples/device/audio_test/Makefile new file mode 100755 index 00000000..5a455078 --- /dev/null +++ b/tinyusb/examples/device/audio_test/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/audio_test/src/main.c b/tinyusb/examples/device/audio_test/src/main.c new file mode 100755 index 00000000..9a2fdd3a --- /dev/null +++ b/tinyusb/examples/device/audio_test/src/main.c @@ -0,0 +1,446 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Reinhard Panhuber + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* plot_audio_samples.py requires following modules: + * $ sudo apt install libportaudio + * $ pip3 install sounddevice matplotlib + * + * Then run + * $ python3 plot_audio_samples.py + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +#ifndef AUDIO_SAMPLE_RATE +#define AUDIO_SAMPLE_RATE 48000 +#endif + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +// Audio controls +// Current states +bool mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 +uint16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 +uint32_t sampFreq; +uint8_t clkValid; + +// Range states +audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; // Volume range state +audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state + +// Audio test data +uint16_t test_buffer_audio[CFG_TUD_AUDIO_EP_SZ_IN/2]; +uint16_t startVal = 0; + +void led_blinking_task(void); +void audio_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + // Init values + sampFreq = AUDIO_SAMPLE_RATE; + clkValid = 1; + + sampleFreqRng.wNumSubRanges = 1; + sampleFreqRng.subrange[0].bMin = AUDIO_SAMPLE_RATE; + sampleFreqRng.subrange[0].bMax = AUDIO_SAMPLE_RATE; + sampleFreqRng.subrange[0].bRes = 0; + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + audio_task(); + } + + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// AUDIO Task +//--------------------------------------------------------------------+ + +void audio_task(void) +{ + // Yet to be filled - e.g. put meas data into TX FIFOs etc. + asm("nop"); +} + +//--------------------------------------------------------------------+ +// Application Callback API Implementations +//--------------------------------------------------------------------+ + +// Invoked when audio class specific set request received for an EP +bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + (void) pBuff; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t ep = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) ep; + + return false; // Yet not implemented +} + +// Invoked when audio class specific set request received for an interface +bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + (void) pBuff; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) itf; + + return false; // Yet not implemented +} + +// Invoked when audio class specific set request received for an entity +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + (void) itf; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // If request is for our feature unit + if ( entityID == 2 ) + { + switch ( ctrlSel ) + { + case AUDIO_FU_CTRL_MUTE: + // Request uses format layout 1 + TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + + mute[channelNum] = ((audio_control_cur_1_t*) pBuff)->bCur; + + TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); + return true; + + case AUDIO_FU_CTRL_VOLUME: + // Request uses format layout 2 + TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + + volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur; + + TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); + return true; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an EP +bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t ep = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) ep; + + // return tud_control_xfer(rhport, p_request, &tmp, 1); + + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an interface +bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) itf; + + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an entity +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + // uint8_t itf = TU_U16_LOW(p_request->wIndex); // Since we have only one audio function implemented, we do not need the itf value + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // Input terminal (Microphone input) + if (entityID == 1) + { + switch ( ctrlSel ) + { + case AUDIO_TE_CTRL_CONNECTOR: + { + // The terminal connector control only has a get request with only the CUR attribute. + audio_desc_channel_cluster_t ret; + + // Those are dummy values for now + ret.bNrChannels = 1; + ret.bmChannelConfig = 0; + ret.iChannelNames = 0; + + TU_LOG2(" Get terminal connector\r\n"); + + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret)); + } + break; + + // Unknown/Unsupported control selector + default: + TU_BREAKPOINT(); + return false; + } + } + + // Feature unit + if (entityID == 2) + { + switch ( ctrlSel ) + { + case AUDIO_FU_CTRL_MUTE: + // Audio control mute cur parameter block consists of only one byte - we thus can send it right away + // There does not exist a range parameter block for mute + TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); + return tud_control_xfer(rhport, p_request, &mute[channelNum], 1); + + case AUDIO_FU_CTRL_VOLUME: + switch ( p_request->bRequest ) + { + case AUDIO_CS_REQ_CUR: + TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); + return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); + + case AUDIO_CS_REQ_RANGE: + TU_LOG2(" Get Volume range of channel: %u\r\n", channelNum); + + // Copy values - only for testing - better is version below + audio_control_range_2_n_t(1) + ret; + + ret.wNumSubRanges = 1; + ret.subrange[0].bMin = -90; // -90 dB + ret.subrange[0].bMax = 90; // +90 dB + ret.subrange[0].bRes = 1; // 1 dB steps + + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret)); + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + // Clock Source unit + if ( entityID == 4 ) + { + switch ( ctrlSel ) + { + case AUDIO_CS_CTRL_SAM_FREQ: + // channelNum is always zero in this case + switch ( p_request->bRequest ) + { + case AUDIO_CS_REQ_CUR: + TU_LOG2(" Get Sample Freq.\r\n"); + return tud_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); + + case AUDIO_CS_REQ_RANGE: + TU_LOG2(" Get Sample Freq. range\r\n"); + return tud_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng)); + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + case AUDIO_CS_CTRL_CLK_VALID: + // Only cur attribute exists for this request + TU_LOG2(" Get Sample Freq. valid\r\n"); + return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + TU_LOG2(" Unsupported entity: %d\r\n", entityID); + return false; // Yet not implemented +} + +bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting) +{ + (void) rhport; + (void) itf; + (void) ep_in; + (void) cur_alt_setting; + + tud_audio_write ((uint8_t *)test_buffer_audio, CFG_TUD_AUDIO_EP_SZ_IN); + + return true; +} + +bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting) +{ + (void) rhport; + (void) n_bytes_copied; + (void) itf; + (void) ep_in; + (void) cur_alt_setting; + + for (size_t cnt = 0; cnt < CFG_TUD_AUDIO_EP_SZ_IN/2; cnt++) + { + test_buffer_audio[cnt] = startVal++; + } + + return true; +} + +bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + (void) p_request; + startVal = 0; + + return true; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/audio_test/src/plot_audio_samples.py b/tinyusb/examples/device/audio_test/src/plot_audio_samples.py new file mode 100755 index 00000000..6e3c4978 --- /dev/null +++ b/tinyusb/examples/device/audio_test/src/plot_audio_samples.py @@ -0,0 +1,34 @@ +import sounddevice as sd +import matplotlib.pyplot as plt +import numpy as np +import platform + +if __name__ == '__main__': + + # If you got "ValueError: No input device matching", that is because your PC name example device + # differently from tested list below. Uncomment the next line to see full list and try to pick correct one + # print(sd.query_devices()) + + fs = 48000 # Sample rate + duration = 100e-3 # Duration of recording + + if platform.system() == 'Windows': + # MME is needed since there are more than one MicNode device APIs (at least in Windows) + device = 'Microphone (MicNode) MME' + elif platform.system() == 'Darwin': + device = 'MicNode' + else: + device ='default' + + myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=1, dtype='int16', device=device) + print('Waiting...') + sd.wait() # Wait until recording is finished + print('Done!') + + time = np.arange(0, duration, 1 / fs) # time vector + plt.plot(time, myrecording) + plt.xlabel('Time [s]') + plt.ylabel('Amplitude') + plt.title('MicNode') + plt.show() +
\ No newline at end of file diff --git a/tinyusb/examples/device/audio_test/src/tusb_config.h b/tinyusb/examples/device/audio_test/src/tusb_config.h new file mode 100755 index 00000000..683a1a56 --- /dev/null +++ b/tinyusb/examples/device/audio_test/src/tusb_config.h @@ -0,0 +1,111 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +#else +#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_AUDIO 1 +#define CFG_TUD_VENDOR 0 + +//-------------------------------------------------------------------- +// AUDIO CLASS DRIVER CONFIGURATION +//-------------------------------------------------------------------- + +// Have a look into audio_device.h for all configurations + +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_ONE_CH_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1 // Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes) +#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer + +#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 +#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! +#define CFG_TUD_AUDIO_EP_SZ_IN 48 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX // 48 Samples (48 kHz) x 2 Bytes/Sample x 1 Channel +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN // Maximum EP IN size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN + 1 + +#ifdef __cplusplus +} +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/audio_test/src/usb_descriptors.c b/tinyusb/examples/device/audio_test/src/usb_descriptors.c new file mode 100755 index 00000000..67dd34d2 --- /dev/null +++ b/tinyusb/examples/device/audio_test/src/usb_descriptors.c @@ -0,0 +1,160 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ +enum +{ + ITF_NUM_AUDIO_CONTROL = 0, + ITF_NUM_AUDIO_STREAMING, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX +// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number +// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... +#define EPNUM_AUDIO 0x03 +#else +#define EPNUM_AUDIO 0x01 +#endif + +uint8_t const desc_configuration[] = +{ + // Interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "PaniRCorp", // 1: Manufacturer + "MicNode", // 2: Product + "123456", // 3: Serials, should use chip ID + "UAC2", // 4: Audio Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Convert ASCII string into UTF-16 + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/board_test/CMakeLists.txt b/tinyusb/examples/device/board_test/CMakeLists.txt new file mode 100755 index 00000000..37113578 --- /dev/null +++ b/tinyusb/examples/device/board_test/CMakeLists.txt @@ -0,0 +1,42 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# Check for -DFAMILY= +if(FAMILY MATCHES "^esp32s[2-3]") + # use BOARD-Directory name for project id + get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + set(PROJECT ${BOARD}-${PROJECT}) + + # TOP is absolute path to root directory of TinyUSB git repo + set(TOP "../../..") + get_filename_component(TOP "${TOP}" REALPATH) + + project(${PROJECT}) + +else() + + # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) + family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + + project(${PROJECT}) + + # Checks this example is valid for the family and initializes the project + family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + + add_executable(${PROJECT}) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Configure compilation flags and libraries for the example... see the corresponding function + # in hw/bsp/FAMILY/family.cmake for details. + family_configure_device_example(${PROJECT}) +endif() diff --git a/tinyusb/examples/device/board_test/Makefile b/tinyusb/examples/device/board_test/Makefile new file mode 100755 index 00000000..b65575ce --- /dev/null +++ b/tinyusb/examples/device/board_test/Makefile @@ -0,0 +1,18 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +# board_test example is special example that doesn't enable device or host stack +# This can cause some TinyUSB API missing, this hack to allow us to fill those API +# to pass the compilation process +CFLAGS += \ + -D"tud_int_handler(x)= " \ + +include ../../rules.mk diff --git a/tinyusb/examples/device/board_test/sdkconfig.defaults b/tinyusb/examples/device/board_test/sdkconfig.defaults new file mode 100755 index 00000000..83871619 --- /dev/null +++ b/tinyusb/examples/device/board_test/sdkconfig.defaults @@ -0,0 +1,3 @@ +CONFIG_IDF_CMAKE=y +CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y diff --git a/tinyusb/examples/device/board_test/src/CMakeLists.txt b/tinyusb/examples/device/board_test/src/CMakeLists.txt new file mode 100755 index 00000000..e4e1f4e9 --- /dev/null +++ b/tinyusb/examples/device/board_test/src/CMakeLists.txt @@ -0,0 +1,17 @@ +# FAMILY = esp32sx +idf_component_register(SRCS "main.c" + INCLUDE_DIRS "." + REQUIRES freertos soc) + +file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake) + +if(EXISTS ${board_cmake}) + include(${board_cmake}) +endif() + +idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH) +target_include_directories(${COMPONENT_TARGET} PUBLIC + "${FREERTOS_ORIG_INCLUDE_PATH}" + "${TOP}/hw" + "${TOP}/src" +) diff --git a/tinyusb/examples/device/board_test/src/main.c b/tinyusb/examples/device/board_test/src/main.c new file mode 100755 index 00000000..c77dd564 --- /dev/null +++ b/tinyusb/examples/device/board_test/src/main.c @@ -0,0 +1,78 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : button is not pressed + * - 1000 ms : button is pressed (and hold) + */ +enum { + BLINK_PRESSED = 250, + BLINK_UNPRESSED = 1000 +}; + +#define HELLO_STR "Hello from TinyUSB\r\n" + +int main(void) +{ + board_init(); + + uint32_t start_ms = 0; + bool led_state = false; + + while (1) + { + uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED; + + // Blink every interval ms + if ( !(board_millis() - start_ms < interval_ms) ) + { + board_uart_write(HELLO_STR, strlen(HELLO_STR)); + + start_ms = board_millis(); + + board_led_write(led_state); + led_state = 1 - led_state; // toggle + } + } + + return 0; +} + +#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +void app_main(void) +{ + main(); +} +#endif diff --git a/tinyusb/examples/device/board_test/src/tusb_config.h b/tinyusb/examples/device/board_test/src/tusb_config.h new file mode 100755 index 00000000..da33729e --- /dev/null +++ b/tinyusb/examples/device/board_test/src/tusb_config.h @@ -0,0 +1,85 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS + #define CFG_TUSB_OS OPT_OS_NONE +#endif + +#define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/cdc_dual_ports/CMakeLists.txt b/tinyusb/examples/device/cdc_dual_ports/CMakeLists.txt new file mode 100755 index 00000000..abc4d91d --- /dev/null +++ b/tinyusb/examples/device/cdc_dual_ports/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/cdc_dual_ports/Makefile b/tinyusb/examples/device/cdc_dual_ports/Makefile new file mode 100755 index 00000000..5a455078 --- /dev/null +++ b/tinyusb/examples/device/cdc_dual_ports/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/cdc_dual_ports/src/main.c b/tinyusb/examples/device/cdc_dual_ports/src/main.c new file mode 100755 index 00000000..34cd29ed --- /dev/null +++ b/tinyusb/examples/device/cdc_dual_ports/src/main.c @@ -0,0 +1,100 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <ctype.h> + +#include "bsp/board.h" +#include "tusb.h" + +//------------- prototypes -------------// +static void cdc_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + cdc_task(); + } + + return 0; +} + +// echo to either Serial0 or Serial1 +// with Serial0 as all lower case, Serial1 as all upper case +static void echo_serial_port(uint8_t itf, uint8_t buf[], uint32_t count) +{ + for(uint32_t i=0; i<count; i++) + { + if (itf == 0) + { + // echo back 1st port as lower case + if (isupper(buf[i])) buf[i] += 'a' - 'A'; + } + else + { + // echo back 2nd port as upper case + if (islower(buf[i])) buf[i] -= 'a' - 'A'; + } + + tud_cdc_n_write_char(itf, buf[i]); + } + tud_cdc_n_write_flush(itf); +} + +//--------------------------------------------------------------------+ +// USB CDC +//--------------------------------------------------------------------+ +static void cdc_task(void) +{ + uint8_t itf; + + for (itf = 0; itf < CFG_TUD_CDC; itf++) + { + // connected() check for DTR bit + // Most but not all terminal client set this when making connection + // if ( tud_cdc_n_connected(itf) ) + { + if ( tud_cdc_n_available(itf) ) + { + uint8_t buf[64]; + + uint32_t count = tud_cdc_n_read(itf, buf, sizeof(buf)); + + // echo back to both serial ports + echo_serial_port(0, buf, count); + echo_serial_port(1, buf, count); + } + } + } +} diff --git a/tinyusb/examples/device/cdc_dual_ports/src/tusb_config.h b/tinyusb/examples/device/cdc_dual_ports/src/tusb_config.h new file mode 100755 index 00000000..ff8535d1 --- /dev/null +++ b/tinyusb/examples/device/cdc_dual_ports/src/tusb_config.h @@ -0,0 +1,115 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 2 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// CDC Endpoint transfer buffer size, more is faster +#define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/cdc_dual_ports/src/usb_descriptors.c b/tinyusb/examples/device/cdc_dual_ports/src/usb_descriptors.c new file mode 100755 index 00000000..b935b672 --- /dev/null +++ b/tinyusb/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -0,0 +1,211 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ +enum +{ + ITF_NUM_CDC_0 = 0, + ITF_NUM_CDC_0_DATA, + ITF_NUM_CDC_1, + ITF_NUM_CDC_1_DATA, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_CDC * TUD_CDC_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_CDC_0_NOTIF 0x81 + #define EPNUM_CDC_0_OUT 0x02 + #define EPNUM_CDC_0_IN 0x82 + + #define EPNUM_CDC_1_NOTIF 0x84 + #define EPNUM_CDC_1_OUT 0x05 + #define EPNUM_CDC_1_IN 0x85 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_0_NOTIF 0x81 + #define EPNUM_CDC_0_OUT 0x02 + #define EPNUM_CDC_0_IN 0x83 + + #define EPNUM_CDC_1_NOTIF 0x84 + #define EPNUM_CDC_1_OUT 0x05 + #define EPNUM_CDC_1_IN 0x86 + +#else + #define EPNUM_CDC_0_NOTIF 0x81 + #define EPNUM_CDC_0_OUT 0x02 + #define EPNUM_CDC_0_IN 0x82 + + #define EPNUM_CDC_1_NOTIF 0x83 + #define EPNUM_CDC_1_OUT 0x04 + #define EPNUM_CDC_1_IN 0x84 +#endif + +uint8_t const desc_fs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 64), + + // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 64), +}; + +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 512), + + // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 512), +}; +#endif + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID + "TinyUSB CDC", // 4: CDC Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/cdc_msc/.skip.MCU_SAMD11 b/tinyusb/examples/device/cdc_msc/.skip.MCU_SAMD11 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc/.skip.MCU_SAMD11 diff --git a/tinyusb/examples/device/cdc_msc/CMakeLists.txt b/tinyusb/examples/device/cdc_msc/CMakeLists.txt new file mode 100755 index 00000000..fa6e83b7 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc/CMakeLists.txt @@ -0,0 +1,29 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/cdc_msc/Makefile b/tinyusb/examples/device/cdc_msc/Makefile new file mode 100755 index 00000000..69b633fe --- /dev/null +++ b/tinyusb/examples/device/cdc_msc/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/cdc_msc/src/main.c b/tinyusb/examples/device/cdc_msc/src/main.c new file mode 100755 index 00000000..131ae654 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc/src/main.c @@ -0,0 +1,165 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); +void cdc_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + + cdc_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + + +//--------------------------------------------------------------------+ +// USB CDC +//--------------------------------------------------------------------+ +void cdc_task(void) +{ + // connected() check for DTR bit + // Most but not all terminal client set this when making connection + // if ( tud_cdc_connected() ) + { + // connected and there are data available + if ( tud_cdc_available() ) + { + // read datas + char buf[64]; + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + (void) count; + + // Echo back + // Note: Skip echo by commenting out write() and write_flush() + // for throughput test e.g + // $ dd if=/dev/zero of=/dev/ttyACM0 count=10000 + tud_cdc_write(buf, count); + tud_cdc_write_flush(); + } + } +} + +// Invoked when cdc when line state changed e.g connected/disconnected +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) +{ + (void) itf; + (void) rts; + + // TODO set some indicator + if ( dtr ) + { + // Terminal connected + }else + { + // Terminal disconnected + } +} + +// Invoked when CDC interface received data from host +void tud_cdc_rx_cb(uint8_t itf) +{ + (void) itf; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/cdc_msc/src/msc_disk.c b/tinyusb/examples/device/cdc_msc/src/msc_disk.c new file mode 100755 index 00000000..503baace --- /dev/null +++ b/tinyusb/examples/device/cdc_msc/src/msc_disk.c @@ -0,0 +1,259 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board.h" +#include "tusb.h" + +#if CFG_TUD_MSC + +// whether host does safe-eject +static bool ejected = false; + +// Some MCU doesn't have enough 8KB SRAM to store the whole disk +// We will use Flash as read-only disk with board that has +// CFG_EXAMPLE_MSC_READONLY defined + +#define README_CONTENTS \ +"This is tinyusb's MassStorage Class demo.\r\n\r\n\ +If you find any bugs or get any questions, feel free to file an\r\n\ +issue at github.com/hathach/tinyusb" + +enum +{ + DISK_BLOCK_NUM = 16, // 8KB is the smallest size that windows allow to mount + DISK_BLOCK_SIZE = 512 +}; + +#ifdef CFG_EXAMPLE_MSC_READONLY +const +#endif +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +{ + //------------- Block0: Boot Sector -------------// + // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; + // sector_per_cluster = 1; reserved_sectors = 1; + // fat_num = 1; fat12_root_entry_num = 16; + // sector_per_fat = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0; + // drive_number = 0x80; media_type = 0xf8; extended_boot_signature = 0x29; + // filesystem_type = "FAT12 "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC"; + // FAT magic code at offset 510-511 + { + 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00, + 0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' , + 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00, + + // Zero up to 2 last bytes of FAT magic code + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA + }, + + //------------- Block1: FAT12 Table -------------// + { + 0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file + }, + + //------------- Block2: Root Directory -------------// + { + // first entry is volume label + 'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + // second entry is readme file + 'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D, + 0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00, + sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes) + }, + + //------------- Block3: Readme Content -------------// + README_CONTENTS +}; + +// Invoked when received SCSI_CMD_INQUIRY +// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively +void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) +{ + (void) lun; + + const char vid[] = "TinyUSB"; + const char pid[] = "Mass Storage"; + const char rev[] = "1.0"; + + memcpy(vendor_id , vid, strlen(vid)); + memcpy(product_id , pid, strlen(pid)); + memcpy(product_rev, rev, strlen(rev)); +} + +// Invoked when received Test Unit Ready command. +// return true allowing host to read/write this LUN e.g SD card inserted +bool tud_msc_test_unit_ready_cb(uint8_t lun) +{ + (void) lun; + + // RAM disk is ready until ejected + if (ejected) { + tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3a, 0x00); + return false; + } + + return true; +} + +// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size +// Application update block count and block size +void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) +{ + (void) lun; + + *block_count = DISK_BLOCK_NUM; + *block_size = DISK_BLOCK_SIZE; +} + +// Invoked when received Start Stop Unit command +// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage +// - Start = 1 : active mode, if load_eject = 1 : load disk storage +bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) +{ + (void) lun; + (void) power_condition; + + if ( load_eject ) + { + if (start) + { + // load disk storage + }else + { + // unload disk storage + ejected = true; + } + } + + return true; +} + +// Callback invoked when received READ10 command. +// Copy disk's data to buffer (up to bufsize) and return number of copied bytes. +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) +{ + (void) lun; + + uint8_t const* addr = msc_disk[lba] + offset; + memcpy(buffer, addr, bufsize); + + return bufsize; +} + +// Callback invoked when received WRITE10 command. +// Process data in buffer to disk's storage and return number of written bytes +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) +{ + (void) lun; + +#ifndef CFG_EXAMPLE_MSC_READONLY + uint8_t* addr = msc_disk[lba] + offset; + memcpy(addr, buffer, bufsize); +#else + (void) lba; (void) offset; (void) buffer; +#endif + + return bufsize; +} + +// Callback invoked when received an SCSI command not in built-in list below +// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE +// - READ10 and WRITE10 has their own callbacks +int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) +{ + // read10 & write10 has their own callback and MUST not be handled here + + void const* response = NULL; + uint16_t resplen = 0; + + // most scsi handled is input + bool in_xfer = true; + + switch (scsi_cmd[0]) + { + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + // Host is about to read/write etc ... better not to disconnect disk + resplen = 0; + break; + + default: + // Set Sense = Invalid Command Operation + tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + + // negative means error -> tinyusb could stall and/or response with failed status + resplen = -1; + break; + } + + // return resplen must not larger than bufsize + if ( resplen > bufsize ) resplen = bufsize; + + if ( response && (resplen > 0) ) + { + if(in_xfer) + { + memcpy(buffer, response, resplen); + }else + { + // SCSI output + } + } + + return resplen; +} + +#endif diff --git a/tinyusb/examples/device/cdc_msc/src/tusb_config.h b/tinyusb/examples/device/cdc_msc/src/tusb_config.h new file mode 100755 index 00000000..bf6af06b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc/src/tusb_config.h @@ -0,0 +1,119 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 1 +#define CFG_TUD_MSC 1 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// CDC Endpoint transfer buffer size, more is faster +#define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// MSC Buffer size of Device Mass storage +#define CFG_TUD_MSC_EP_BUFSIZE 512 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/cdc_msc/src/usb_descriptors.c b/tinyusb/examples/device/cdc_msc/src/usb_descriptors.c new file mode 100755 index 00000000..1a89ce56 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc/src/usb_descriptors.c @@ -0,0 +1,224 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_CDC = 0, + ITF_NUM_CDC_DATA, + ITF_NUM_MSC, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + + #define EPNUM_MSC_OUT 0x05 + #define EPNUM_MSC_IN 0x85 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + + #define EPNUM_MSC_OUT 0x04 + #define EPNUM_MSC_IN 0x85 + +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_CDC_NOTIF 0x83 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x81 + + #define EPNUM_MSC_OUT 0x05 + #define EPNUM_MSC_IN 0x84 + +#else + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + + #define EPNUM_MSC_OUT 0x03 + #define EPNUM_MSC_IN 0x83 + +#endif + +uint8_t const desc_fs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64), +}; + +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), +}; +#endif + + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID + "TinyUSB CDC", // 4: CDC Interface + "TinyUSB MSC", // 5: MSC Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12 diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI diff --git a/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt b/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt new file mode 100755 index 00000000..639dde99 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt @@ -0,0 +1,22 @@ +cmake_minimum_required(VERSION 3.5) + +# TOP is absolute path to root directory of TinyUSB git repo +# needed for esp32sx build. TOOD could be removed later on +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +# Check for -DFAMILY= +if(FAMILY MATCHES "^esp32s[2-3]") +else() + message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") +endif() diff --git a/tinyusb/examples/device/cdc_msc_freertos/Makefile b/tinyusb/examples/device/cdc_msc_freertos/Makefile new file mode 100755 index 00000000..86bacd2d --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/Makefile @@ -0,0 +1,29 @@ +DEPS_SUBMODULES += lib/FreeRTOS-Kernel + +include ../../../tools/top.mk +include ../../make.mk + +FREERTOS_SRC = lib/FreeRTOS-Kernel + +INC += \ + src \ + $(TOP)/hw \ + $(TOP)/$(FREERTOS_SRC)/include \ + $(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT) + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +# FreeRTOS source, all files in port folder +SRC_C += \ + $(FREERTOS_SRC)/list.c \ + $(FREERTOS_SRC)/queue.c \ + $(FREERTOS_SRC)/tasks.c \ + $(FREERTOS_SRC)/timers.c \ + $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) + +# FreeRTOS (lto + Os) linker issue +LDFLAGS += -Wl,--undefined=vTaskSwitchContext + +include ../../rules.mk diff --git a/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults b/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults new file mode 100755 index 00000000..83871619 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults @@ -0,0 +1,3 @@ +CONFIG_IDF_CMAKE=y +CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt b/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt new file mode 100755 index 00000000..6b188fd3 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt @@ -0,0 +1,32 @@ +idf_component_register(SRCS "main.c" "usb_descriptors.c" "msc_disk.c" + INCLUDE_DIRS "." + REQUIRES freertos soc) + +file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake) + +if(EXISTS ${board_cmake}) + include(${board_cmake}) +endif() + +idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH) +target_include_directories(${COMPONENT_TARGET} PUBLIC + "${FREERTOS_ORIG_INCLUDE_PATH}" + "${TOP}/hw" + "${TOP}/src" +) + +target_sources(${COMPONENT_TARGET} PUBLIC + "${TOP}/src/tusb.c" + "${TOP}/src/common/tusb_fifo.c" + "${TOP}/src/device/usbd.c" + "${TOP}/src/device/usbd_control.c" + "${TOP}/src/class/cdc/cdc_device.c" + "${TOP}/src/class/dfu/dfu_rt_device.c" + "${TOP}/src/class/hid/hid_device.c" + "${TOP}/src/class/midi/midi_device.c" + "${TOP}/src/class/msc/msc_device.c" + "${TOP}/src/class/net/net_device.c" + "${TOP}/src/class/usbtmc/usbtmc_device.c" + "${TOP}/src/class/vendor/vendor_device.c" + "${TOP}/src/portable/espressif/esp32sx/dcd_esp32sx.c" +) diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h b/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h new file mode 100755 index 00000000..568b27a1 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h @@ -0,0 +1,182 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// Include MCU header +#include "bsp/board_mcu.h" + +extern uint32_t SystemCoreClock; + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( 0*1024 ) // dynamic is not used +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 0 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +#ifdef __RX__ +/* Renesas RX series */ +#define vSoftwareInterruptISR INT_Excep_ICU_SWINT +#define vTickISR INT_Excep_CMT0_CMI0 +#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) +#define configKERNEL_INTERRUPT_PRIORITY 1 +#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 + +#else + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ +#if defined(__NVIC_PRIO_BITS) + // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h + #define configPRIO_BITS __NVIC_PRIO_BITS +#elif defined(__ECLIC_INTCTLBITS) + // RISC-V Bumblebee core from nuclei + #define configPRIO_BITS __ECLIC_INTCTLBITS +#else + #error "FreeRTOS configPRIO_BITS to be defined" +#endif + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) + +/* The highest interrupt priority that can be used by any interrupt service +routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL +INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER +PRIORITY THAN THIS! (higher priorities are lower numeric values. */ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 + +/* Interrupt priorities used by the kernel port layer itself. These are generic +to all Cortex-M ports, and do not rely on any particular library functions. */ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! +See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +#endif + +#endif /* __FREERTOS_CONFIG__H */ diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c b/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c new file mode 100755 index 00000000..ab885947 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c @@ -0,0 +1,114 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +//--------------------------------------------------------------------+ +// INCLUDE +//--------------------------------------------------------------------+ +#include "FreeRTOS.h" +#include "task.h" +#include "common/tusb_common.h" + + +void vApplicationMallocFailedHook(void) +{ + taskDISABLE_INTERRUPTS(); + TU_ASSERT(false, ); +} + +void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) +{ + (void) pxTask; + (void) pcTaskName; + + taskDISABLE_INTERRUPTS(); + TU_ASSERT(false, ); +} + +/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an + * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is + * used by the Idle task. */ +void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) +{ + /* If the buffers to be provided to the Idle task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xIdleTaskTCB; + static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Idle task's + state will be stored. */ + *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; + + /* Pass out the array that will be used as the Idle task's stack. */ + *ppxIdleTaskStackBuffer = uxIdleTaskStack; + + /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; +} + +/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the + * application must provide an implementation of vApplicationGetTimerTaskMemory() + * to provide the memory that is used by the Timer service task. */ +void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize ) +{ + /* If the buffers to be provided to the Timer task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xTimerTaskTCB; + static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Timer + task's state will be stored. */ + *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; + + /* Pass out the array that will be used as the Timer task's stack. */ + *ppxTimerTaskStackBuffer = uxTimerTaskStack; + + /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */ + *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; +} + +#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X +#include "iodefine.h" +void vApplicationSetupTimerInterrupt(void) +{ + /* Enable CMT0 */ + SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); + MSTP(CMT0) = 0; + SYSTEM.PRCR.WORD = (0xA5u<<8); + + CMT0.CMCNT = 0; + CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); + CMT0.CMCR.WORD = TU_BIT(6) | 2; + IR(CMT0, CMI0) = 0; + IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY; + IEN(CMT0, CMI0) = 1; + CMT.CMSTR0.BIT.STR0 = 1; +} +#endif diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/main.c b/tinyusb/examples/device/cdc_msc_freertos/src/main.c new file mode 100755 index 00000000..c27b7fed --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/main.c @@ -0,0 +1,230 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "FreeRTOS.h" +#include "task.h" +#include "timers.h" +#include "queue.h" +#include "semphr.h" + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +// static timer +StaticTimer_t blinky_tmdef; +TimerHandle_t blinky_tm; + +// static task for usbd +// Increase stack size when debug log is enabled +#if CFG_TUSB_DEBUG + #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE) +#else + #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) +#endif + +StackType_t usb_device_stack[USBD_STACK_SIZE]; +StaticTask_t usb_device_taskdef; + +// static task for cdc +#define CDC_STACK_SZIE configMINIMAL_STACK_SIZE +StackType_t cdc_stack[CDC_STACK_SZIE]; +StaticTask_t cdc_taskdef; + + +void led_blinky_cb(TimerHandle_t xTimer); +void usb_device_task(void* param); +void cdc_task(void* params); + +//--------------------------------------------------------------------+ +// Main +//--------------------------------------------------------------------+ + +int main(void) +{ + board_init(); + + // soft timer for blinky + blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); + xTimerStart(blinky_tm, 0); + + // Create a task for tinyusb device stack + (void) xTaskCreateStatic( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); + + // Create CDC task + (void) xTaskCreateStatic( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); + + // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#if CFG_TUSB_MCU != OPT_MCU_ESP32S2 && CFG_TUSB_MCU != OPT_MCU_ESP32S3 + vTaskStartScheduler(); +#endif + + return 0; +} + +#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +void app_main(void) +{ + main(); +} +#endif + +// USB Device Driver task +// This top level thread process all usb events and invoke callbacks +void usb_device_task(void* param) +{ + (void) param; + + // This should be called after scheduler/kernel is started. + // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. + tusb_init(); + + // RTOS forever loop + while (1) + { + // tinyusb device task + tud_task(); + } +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0); +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), 0); +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_SUSPENDED), 0); +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0); +} + +//--------------------------------------------------------------------+ +// USB CDC +//--------------------------------------------------------------------+ +void cdc_task(void* params) +{ + (void) params; + + // RTOS forever loop + while ( 1 ) + { + // connected() check for DTR bit + // Most but not all terminal client set this when making connection + // if ( tud_cdc_connected() ) + { + // There are data available + if ( tud_cdc_available() ) + { + uint8_t buf[64]; + + // read and echo back + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + (void) count; + + // Echo back + // Note: Skip echo by commenting out write() and write_flush() + // for throughput test e.g + // $ dd if=/dev/zero of=/dev/ttyACM0 count=10000 + tud_cdc_write(buf, count); + tud_cdc_write_flush(); + } + } + + // For ESP32-S2 this delay is essential to allow idle how to run and reset wdt + vTaskDelay(pdMS_TO_TICKS(10)); + } +} + +// Invoked when cdc when line state changed e.g connected/disconnected +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) +{ + (void) itf; + (void) rts; + + // TODO set some indicator + if ( dtr ) + { + // Terminal connected + }else + { + // Terminal disconnected + } +} + +// Invoked when CDC interface received data from host +void tud_cdc_rx_cb(uint8_t itf) +{ + (void) itf; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinky_cb(TimerHandle_t xTimer) +{ + (void) xTimer; + static bool led_state = false; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c b/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c new file mode 100755 index 00000000..5aa7befc --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -0,0 +1,249 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board.h" +#include "tusb.h" + +#if CFG_TUD_MSC + +// Some MCU doesn't have enough 8KB SRAM to store the whole disk +// We will use Flash as read-only disk with board that has +// CFG_EXAMPLE_MSC_READONLY defined + +#define README_CONTENTS \ +"This is tinyusb's MassStorage Class demo.\r\n\r\n\ +If you find any bugs or get any questions, feel free to file an\r\n\ +issue at github.com/hathach/tinyusb" + +enum +{ + DISK_BLOCK_NUM = 16, // 8KB is the smallest size that windows allow to mount + DISK_BLOCK_SIZE = 512 +}; + +#ifdef CFG_EXAMPLE_MSC_READONLY +const +#endif +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +{ + //------------- Block0: Boot Sector -------------// + // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; + // sector_per_cluster = 1; reserved_sectors = 1; + // fat_num = 1; fat12_root_entry_num = 16; + // sector_per_fat = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0; + // drive_number = 0x80; media_type = 0xf8; extended_boot_signature = 0x29; + // filesystem_type = "FAT12 "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC"; + // FAT magic code at offset 510-511 + { + 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00, + 0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' , + 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00, + + // Zero up to 2 last bytes of FAT magic code + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA + }, + + //------------- Block1: FAT12 Table -------------// + { + 0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file + }, + + //------------- Block2: Root Directory -------------// + { + // first entry is volume label + 'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + // second entry is readme file + 'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D, + 0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00, + sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes) + }, + + //------------- Block3: Readme Content -------------// + README_CONTENTS +}; + +// Invoked when received SCSI_CMD_INQUIRY +// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively +void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) +{ + (void) lun; + + const char vid[] = "TinyUSB"; + const char pid[] = "Mass Storage"; + const char rev[] = "1.0"; + + memcpy(vendor_id , vid, strlen(vid)); + memcpy(product_id , pid, strlen(pid)); + memcpy(product_rev, rev, strlen(rev)); +} + +// Invoked when received Test Unit Ready command. +// return true allowing host to read/write this LUN e.g SD card inserted +bool tud_msc_test_unit_ready_cb(uint8_t lun) +{ + (void) lun; + + return true; // RAM disk is always ready +} + +// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size +// Application update block count and block size +void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) +{ + (void) lun; + + *block_count = DISK_BLOCK_NUM; + *block_size = DISK_BLOCK_SIZE; +} + +// Invoked when received Start Stop Unit command +// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage +// - Start = 1 : active mode, if load_eject = 1 : load disk storage +bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) +{ + (void) lun; + (void) power_condition; + + if ( load_eject ) + { + if (start) + { + // load disk storage + }else + { + // unload disk storage + } + } + + return true; +} + +// Callback invoked when received READ10 command. +// Copy disk's data to buffer (up to bufsize) and return number of copied bytes. +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) +{ + (void) lun; + + uint8_t const* addr = msc_disk[lba] + offset; + memcpy(buffer, addr, bufsize); + + return bufsize; +} + +// Callback invoked when received WRITE10 command. +// Process data in buffer to disk's storage and return number of written bytes +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) +{ + (void) lun; + +#ifndef CFG_EXAMPLE_MSC_READONLY + uint8_t* addr = msc_disk[lba] + offset; + memcpy(addr, buffer, bufsize); +#else + (void) lba; (void) offset; (void) buffer; +#endif + + return bufsize; +} + +// Callback invoked when received an SCSI command not in built-in list below +// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE +// - READ10 and WRITE10 has their own callbacks +int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) +{ + // read10 & write10 has their own callback and MUST not be handled here + + void const* response = NULL; + uint16_t resplen = 0; + + // most scsi handled is input + bool in_xfer = true; + + switch (scsi_cmd[0]) + { + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + // Host is about to read/write etc ... better not to disconnect disk + resplen = 0; + break; + + default: + // Set Sense = Invalid Command Operation + tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + + // negative means error -> tinyusb could stall and/or response with failed status + resplen = -1; + break; + } + + // return resplen must not larger than bufsize + if ( resplen > bufsize ) resplen = bufsize; + + if ( response && (resplen > 0) ) + { + if(in_xfer) + { + memcpy(buffer, response, resplen); + }else + { + // SCSI output + } + } + + return resplen; +} + +#endif diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h b/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h new file mode 100755 index 00000000..ff543834 --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -0,0 +1,119 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +// This examples use FreeRTOS +#define CFG_TUSB_OS OPT_OS_FREERTOS + +// can be defined by compiler in DEBUG build +#ifndef CFG_TUSB_DEBUG + #define CFG_TUSB_DEBUG 0 +#endif + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 1 +#define CFG_TUD_MSC 1 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// CDC Endpoint transfer buffer size, more is faster +#define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// MSC Buffer size of Device Mass storage +#define CFG_TUD_MSC_EP_BUFSIZE 512 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c new file mode 100755 index 00000000..75b5ce7b --- /dev/null +++ b/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -0,0 +1,211 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_CDC = 0, + ITF_NUM_CDC_DATA, + ITF_NUM_MSC, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + + #define EPNUM_MSC_OUT 0x05 + #define EPNUM_MSC_IN 0x85 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG + // SAMG doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + + #define EPNUM_MSC_OUT 0x04 + #define EPNUM_MSC_IN 0x85 + +#else + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + + #define EPNUM_MSC_OUT 0x03 + #define EPNUM_MSC_IN 0x83 + +#endif + +uint8_t const desc_fs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64), +}; + +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), +}; +#endif + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID + "TinyUSB CDC", // 4: CDC Interface + "TinyUSB MSC", // 5: MSC Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/dfu/CMakeLists.txt b/tinyusb/examples/device/dfu/CMakeLists.txt new file mode 100755 index 00000000..abc4d91d --- /dev/null +++ b/tinyusb/examples/device/dfu/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/dfu/Makefile b/tinyusb/examples/device/dfu/Makefile new file mode 100755 index 00000000..69b633fe --- /dev/null +++ b/tinyusb/examples/device/dfu/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/dfu/src/main.c b/tinyusb/examples/device/dfu/src/main.c new file mode 100755 index 00000000..5c846452 --- /dev/null +++ b/tinyusb/examples/device/dfu/src/main.c @@ -0,0 +1,219 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + + /* + * After device is enumerated in dfu mode run the following commands + * + * To transfer firmware from host to device (best to test with text file) + * + * $ dfu-util -d cafe -a 0 -D [filename] + * $ dfu-util -d cafe -a 1 -D [filename] + * + * To transfer firmware from device to host: + * + * $ dfu-util -d cafe -a 0 -U [filename] + * $ dfu-util -d cafe -a 1 -U [filename] + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ +const char* upload_image[2]= +{ + "Hello world from TinyUSB DFU! - Partition 0", + "Hello world from TinyUSB DFU! - Partition 1" +}; + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// DFU callbacks +// Note: alt is used as the partition number, in order to support multiple partitions like FLASH, EEPROM, etc. +//--------------------------------------------------------------------+ + +// Invoked right before tud_dfu_download_cb() (state=DFU_DNBUSY) or tud_dfu_manifest_cb() (state=DFU_MANIFEST) +// Application return timeout in milliseconds (bwPollTimeout) for the next download/manifest operation. +// During this period, USB host won't try to communicate with us. +uint32_t tud_dfu_get_timeout_cb(uint8_t alt, uint8_t state) +{ + if ( state == DFU_DNBUSY ) + { + // For this example + // - Atl0 Flash is fast : 1 ms + // - Alt1 EEPROM is slow: 100 ms + return (alt == 0) ? 1 : 100; + } + else if (state == DFU_MANIFEST) + { + // since we don't buffer entire image and do any flashing in manifest stage + return 0; + } + + return 0; +} + +// Invoked when received DFU_DNLOAD (wLength>0) following by DFU_GETSTATUS (state=DFU_DNBUSY) requests +// This callback could be returned before flashing op is complete (async). +// Once finished flashing, application must call tud_dfu_finish_flashing() +void tud_dfu_download_cb(uint8_t alt, uint16_t block_num, uint8_t const* data, uint16_t length) +{ + (void) alt; + (void) block_num; + + //printf("\r\nReceived Alt %u BlockNum %u of length %u\r\n", alt, wBlockNum, length); + + for(uint16_t i=0; i<length; i++) + { + printf("%c", data[i]); + } + + // flashing op for download complete without error + tud_dfu_finish_flashing(DFU_STATUS_OK); +} + +// Invoked when download process is complete, received DFU_DNLOAD (wLength=0) following by DFU_GETSTATUS (state=Manifest) +// Application can do checksum, or actual flashing if buffered entire image previously. +// Once finished flashing, application must call tud_dfu_finish_flashing() +void tud_dfu_manifest_cb(uint8_t alt) +{ + (void) alt; + printf("Download completed, enter manifestation\r\n"); + + // flashing op for manifest is complete without error + // Application can perform checksum, should it fail, use appropriate status such as errVERIFY. + tud_dfu_finish_flashing(DFU_STATUS_OK); +} + +// Invoked when received DFU_UPLOAD request +// Application must populate data with up to length bytes and +// Return the number of written bytes +uint16_t tud_dfu_upload_cb(uint8_t alt, uint16_t block_num, uint8_t* data, uint16_t length) +{ + (void) block_num; + (void) length; + + uint16_t const xfer_len = (uint16_t) strlen(upload_image[alt]); + memcpy(data, upload_image[alt], xfer_len); + + return xfer_len; +} + +// Invoked when the Host has terminated a download or upload transfer +void tud_dfu_abort_cb(uint8_t alt) +{ + (void) alt; + printf("Host aborted transfer\r\n"); +} + +// Invoked when a DFU_DETACH request is received +void tud_dfu_detach_cb(void) +{ + printf("Host detach, we should probably reboot\r\n"); +} + +//--------------------------------------------------------------------+ +// BLINKING TASK + Indicator pulse +//--------------------------------------------------------------------+ + +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/dfu/src/tusb_config.h b/tinyusb/examples/device/dfu/src/tusb_config.h new file mode 100755 index 00000000..66e35702 --- /dev/null +++ b/tinyusb/examples/device/dfu/src/tusb_config.h @@ -0,0 +1,89 @@ +/* + * tusb_config.h + * + * Created on: May 5, 2021 + * Author: Jeremiah McCarthy + */ + +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_DFU 1 + +// DFU buffer size, it has to be set to the buffer size used in TUD_DFU_DESCRIPTOR +#define CFG_TUD_DFU_XFER_BUFSIZE 512 + +#ifdef __cplusplus + } +#endif + +#endif /* TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/dfu/src/usb_descriptors.c b/tinyusb/examples/device/dfu/src/usb_descriptors.c new file mode 100755 index 00000000..1cfe29c5 --- /dev/null +++ b/tinyusb/examples/device/dfu/src/usb_descriptors.c @@ -0,0 +1,171 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "class/dfu/dfu_device.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + #if CFG_TUD_CDC + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + #else + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + #endif + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +// Number of Alternate Interface (each for 1 flash partition) +#define ALT_COUNT 2 + +enum +{ + ITF_NUM_DFU_MODE, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_DFU_DESC_LEN(ALT_COUNT)) + +#define FUNC_ATTRS (DFU_ATTR_CAN_UPLOAD | DFU_ATTR_CAN_DOWNLOAD | DFU_ATTR_MANIFESTATION_TOLERANT) + +uint8_t const desc_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, Alternate count, starting string index, attributes, detach timeout, transfer size + TUD_DFU_DESCRIPTOR(ITF_NUM_DFU_MODE, ALT_COUNT, 4, FUNC_ATTRS, 1000, CFG_TUD_DFU_XFER_BUFSIZE), +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID + "FLASH", // 4: DFU Partition 1 + "EEPROM", // 5: DFU Partition 2 +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + size_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + } + else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) { + chr_count = 31; + } + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u)); + + return _desc_str; +} diff --git a/tinyusb/examples/device/dfu_runtime/CMakeLists.txt b/tinyusb/examples/device/dfu_runtime/CMakeLists.txt new file mode 100755 index 00000000..abc4d91d --- /dev/null +++ b/tinyusb/examples/device/dfu_runtime/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/dfu_runtime/Makefile b/tinyusb/examples/device/dfu_runtime/Makefile new file mode 100755 index 00000000..69b633fe --- /dev/null +++ b/tinyusb/examples/device/dfu_runtime/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/dfu_runtime/src/main.c b/tinyusb/examples/device/dfu_runtime/src/main.c new file mode 100755 index 00000000..823c71ae --- /dev/null +++ b/tinyusb/examples/device/dfu_runtime/src/main.c @@ -0,0 +1,135 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* After device is enumerated, run following command + * + * $ dfu-util -l + * + * It should be able to list our device as in Runtime mode. Then run + * + * $ dfu-util -e + * + * This will send DETTACH command to put device into bootloader. Since this example + * is minimal, it doesn't actually go into DFU mode but rather change the LED blinking + * pattern to fast rate as indicator. + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 1000 ms : device should reboot + * - 250 ms : device not mounted + * - 0 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_DFU_MODE = 100, + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked on DFU_DETACH request to reboot to the bootloader +void tud_dfu_runtime_reboot_to_dfu_cb(void) +{ + blink_interval_ms = BLINK_DFU_MODE; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK + Indicator pulse +//--------------------------------------------------------------------+ + +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/dfu_runtime/src/tusb_config.h b/tinyusb/examples/device/dfu_runtime/src/tusb_config.h new file mode 100755 index 00000000..bdae1d2e --- /dev/null +++ b/tinyusb/examples/device/dfu_runtime/src/tusb_config.h @@ -0,0 +1,87 @@ +/* + * tusb_config.h + * + * Created on: Oct 28, 2019 + * Author: Sylvain Munaut + */ + +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// + +#define CFG_TUD_DFU_RUNTIME 1 + +#ifdef __cplusplus + } +#endif + +#endif /* TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/dfu_runtime/src/usb_descriptors.c b/tinyusb/examples/device/dfu_runtime/src/usb_descriptors.c new file mode 100755 index 00000000..8b2bd265 --- /dev/null +++ b/tinyusb/examples/device/dfu_runtime/src/usb_descriptors.c @@ -0,0 +1,166 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "class/dfu/dfu_rt_device.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + #if CFG_TUD_CDC + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + #else + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + #endif + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_DFU_RT, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_DFU_RT_DESC_LEN) + +uint8_t const desc_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, attributes, detach timeout, transfer size */ + TUD_DFU_RT_DESCRIPTOR(ITF_NUM_DFU_RT, 4, 0x0d, 1000, 4096), +}; + + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID + "TinyUSB DFU runtime", // 4: DFU runtime +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + size_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + } + else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) { + chr_count = 31; + } + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u)); + + return _desc_str; +} diff --git a/tinyusb/examples/device/dynamic_configuration/.skip.MCU_SAMD11 b/tinyusb/examples/device/dynamic_configuration/.skip.MCU_SAMD11 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/dynamic_configuration/.skip.MCU_SAMD11 diff --git a/tinyusb/examples/device/dynamic_configuration/CMakeLists.txt b/tinyusb/examples/device/dynamic_configuration/CMakeLists.txt new file mode 100755 index 00000000..fa6e83b7 --- /dev/null +++ b/tinyusb/examples/device/dynamic_configuration/CMakeLists.txt @@ -0,0 +1,29 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/dynamic_configuration/Makefile b/tinyusb/examples/device/dynamic_configuration/Makefile new file mode 100755 index 00000000..69b633fe --- /dev/null +++ b/tinyusb/examples/device/dynamic_configuration/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/dynamic_configuration/src/main.c b/tinyusb/examples/device/dynamic_configuration/src/main.c new file mode 100755 index 00000000..4c10f55b --- /dev/null +++ b/tinyusb/examples/device/dynamic_configuration/src/main.c @@ -0,0 +1,217 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); +void cdc_task(void); +void midi_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + cdc_task(); + midi_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + + +//--------------------------------------------------------------------+ +// USB CDC +//--------------------------------------------------------------------+ +void cdc_task(void) +{ + if ( tud_cdc_connected() ) + { + // connected and there are data available + if ( tud_cdc_available() ) + { + uint8_t buf[64]; + + // read and echo back + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + + for(uint32_t i=0; i<count; i++) + { + tud_cdc_write_char(buf[i]); + + if ( buf[i] == '\r' ) tud_cdc_write_char('\n'); + } + + tud_cdc_write_flush(); + } + } +} + +// Invoked when cdc when line state changed e.g connected/disconnected +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) +{ + (void) itf; + + // connected + if ( dtr && rts ) + { + // print initial message when connected + tud_cdc_write_str("\r\nTinyUSB CDC MSC device example\r\n"); + } +} + +// Invoked when CDC interface received data from host +void tud_cdc_rx_cb(uint8_t itf) +{ + (void) itf; +} + +//--------------------------------------------------------------------+ +// MIDI Task +//--------------------------------------------------------------------+ + +// Variable that holds the current position in the sequence. +uint32_t note_pos = 0; + +// Store example melody as an array of note values +static const uint8_t note_sequence[] = +{ + 74,78,81,86,90,93,98,102,57,61,66,69,73,78,81,85,88,92,97,100,97,92,88,85,81,78, + 74,69,66,62,57,62,66,69,74,78,81,86,90,93,97,102,97,93,90,85,81,78,73,68,64,61, + 56,61,64,68,74,78,81,86,90,93,98,102 +}; + +void midi_task(void) +{ + static uint32_t start_ms = 0; + + uint8_t const cable_num = 0; // MIDI jack associated with USB endpoint + uint8_t const channel = 0; // 0 for channel 1 + + // The MIDI interface always creates input and output port/jack descriptors + // regardless of these being used or not. Therefore incoming traffic should be read + // (possibly just discarded) to avoid the sender blocking in IO + uint8_t packet[4]; + while( tud_midi_available() ) tud_midi_packet_read(packet); + + // send note every 1000 ms + if (board_millis() - start_ms < 286) return; // not enough time + start_ms += 286; + + // Previous positions in the note sequence. + int previous = note_pos - 1; + + // If we currently are at position 0, set the + // previous position to the last note in the sequence. + if (previous < 0) previous = sizeof(note_sequence) - 1; + + // Send Note On for current position at full velocity (127) on channel 1. + uint8_t note_on[3] = { 0x90 | channel, note_sequence[note_pos], 127 }; + tud_midi_stream_write(cable_num, note_on, 3); + + // Send Note Off for previous note. + uint8_t note_off[3] = { 0x80 | channel, note_sequence[previous], 0}; + tud_midi_stream_write(cable_num, note_off, 3); + + // Increment position + note_pos++; + + // If we are at the end of the sequence, start over. + if (note_pos >= sizeof(note_sequence)) note_pos = 0; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/dynamic_configuration/src/msc_disk.c b/tinyusb/examples/device/dynamic_configuration/src/msc_disk.c new file mode 100755 index 00000000..5aa7befc --- /dev/null +++ b/tinyusb/examples/device/dynamic_configuration/src/msc_disk.c @@ -0,0 +1,249 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board.h" +#include "tusb.h" + +#if CFG_TUD_MSC + +// Some MCU doesn't have enough 8KB SRAM to store the whole disk +// We will use Flash as read-only disk with board that has +// CFG_EXAMPLE_MSC_READONLY defined + +#define README_CONTENTS \ +"This is tinyusb's MassStorage Class demo.\r\n\r\n\ +If you find any bugs or get any questions, feel free to file an\r\n\ +issue at github.com/hathach/tinyusb" + +enum +{ + DISK_BLOCK_NUM = 16, // 8KB is the smallest size that windows allow to mount + DISK_BLOCK_SIZE = 512 +}; + +#ifdef CFG_EXAMPLE_MSC_READONLY +const +#endif +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +{ + //------------- Block0: Boot Sector -------------// + // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; + // sector_per_cluster = 1; reserved_sectors = 1; + // fat_num = 1; fat12_root_entry_num = 16; + // sector_per_fat = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0; + // drive_number = 0x80; media_type = 0xf8; extended_boot_signature = 0x29; + // filesystem_type = "FAT12 "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC"; + // FAT magic code at offset 510-511 + { + 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00, + 0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' , + 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00, + + // Zero up to 2 last bytes of FAT magic code + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA + }, + + //------------- Block1: FAT12 Table -------------// + { + 0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file + }, + + //------------- Block2: Root Directory -------------// + { + // first entry is volume label + 'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + // second entry is readme file + 'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D, + 0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00, + sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes) + }, + + //------------- Block3: Readme Content -------------// + README_CONTENTS +}; + +// Invoked when received SCSI_CMD_INQUIRY +// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively +void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) +{ + (void) lun; + + const char vid[] = "TinyUSB"; + const char pid[] = "Mass Storage"; + const char rev[] = "1.0"; + + memcpy(vendor_id , vid, strlen(vid)); + memcpy(product_id , pid, strlen(pid)); + memcpy(product_rev, rev, strlen(rev)); +} + +// Invoked when received Test Unit Ready command. +// return true allowing host to read/write this LUN e.g SD card inserted +bool tud_msc_test_unit_ready_cb(uint8_t lun) +{ + (void) lun; + + return true; // RAM disk is always ready +} + +// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size +// Application update block count and block size +void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) +{ + (void) lun; + + *block_count = DISK_BLOCK_NUM; + *block_size = DISK_BLOCK_SIZE; +} + +// Invoked when received Start Stop Unit command +// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage +// - Start = 1 : active mode, if load_eject = 1 : load disk storage +bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) +{ + (void) lun; + (void) power_condition; + + if ( load_eject ) + { + if (start) + { + // load disk storage + }else + { + // unload disk storage + } + } + + return true; +} + +// Callback invoked when received READ10 command. +// Copy disk's data to buffer (up to bufsize) and return number of copied bytes. +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) +{ + (void) lun; + + uint8_t const* addr = msc_disk[lba] + offset; + memcpy(buffer, addr, bufsize); + + return bufsize; +} + +// Callback invoked when received WRITE10 command. +// Process data in buffer to disk's storage and return number of written bytes +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) +{ + (void) lun; + +#ifndef CFG_EXAMPLE_MSC_READONLY + uint8_t* addr = msc_disk[lba] + offset; + memcpy(addr, buffer, bufsize); +#else + (void) lba; (void) offset; (void) buffer; +#endif + + return bufsize; +} + +// Callback invoked when received an SCSI command not in built-in list below +// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE +// - READ10 and WRITE10 has their own callbacks +int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) +{ + // read10 & write10 has their own callback and MUST not be handled here + + void const* response = NULL; + uint16_t resplen = 0; + + // most scsi handled is input + bool in_xfer = true; + + switch (scsi_cmd[0]) + { + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + // Host is about to read/write etc ... better not to disconnect disk + resplen = 0; + break; + + default: + // Set Sense = Invalid Command Operation + tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + + // negative means error -> tinyusb could stall and/or response with failed status + resplen = -1; + break; + } + + // return resplen must not larger than bufsize + if ( resplen > bufsize ) resplen = bufsize; + + if ( response && (resplen > 0) ) + { + if(in_xfer) + { + memcpy(buffer, response, resplen); + }else + { + // SCSI output + } + } + + return resplen; +} + +#endif diff --git a/tinyusb/examples/device/dynamic_configuration/src/tusb_config.h b/tinyusb/examples/device/dynamic_configuration/src/tusb_config.h new file mode 100755 index 00000000..23073faf --- /dev/null +++ b/tinyusb/examples/device/dynamic_configuration/src/tusb_config.h @@ -0,0 +1,119 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 1 +#define CFG_TUD_MSC 1 +#define CFG_TUD_MIDI 1 +#define CFG_TUD_HID 0 +#define CFG_TUD_VENDOR 0 + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// MIDI FIFO size of TX and RX +#define CFG_TUD_MIDI_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_MIDI_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// MSC Buffer size of Device Mass storage +#define CFG_TUD_MSC_EP_BUFSIZE 512 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/dynamic_configuration/src/usb_descriptors.c b/tinyusb/examples/device/dynamic_configuration/src/usb_descriptors.c new file mode 100755 index 00000000..9ccb3765 --- /dev/null +++ b/tinyusb/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -0,0 +1,243 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "bsp/board.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +// Configuration mode +// 0 : enumerated as CDC/MIDI. Board button is not pressed when enumerating +// 1 : enumerated as MSC. Board button is pressed when enumerating +static uint32_t mode = 0; + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device_0 = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +tusb_desc_device_t const desc_device_1 = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .idVendor = 0xCafe, + .idProduct = USB_PID + 11, // should be different PID than desc0 + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + mode = board_button_read(); + return (uint8_t const*) (mode ? &desc_device_1 : &desc_device_0); +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_0_NUM_CDC = 0, + ITF_0_NUM_CDC_DATA, + ITF_0_NUM_MIDI, + ITF_0_NUM_MIDI_STREAMING, + ITF_0_NUM_TOTAL +}; + +enum +{ + ITF_1_NUM_MSC = 0, + ITF_1_NUM_TOTAL +}; + +#define CONFIG_0_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MIDI_DESC_LEN) +#define CONFIG_1_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_MSC_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... + #define EPNUM_0_CDC_NOTIF 0x81 + #define EPNUM_0_CDC_OUT 0x02 + #define EPNUM_0_CDC_IN 0x82 + + #define EPNUM_0_MIDI_OUT 0x05 + #define EPNUM_0_MIDI_IN 0x85 + + #define EPNUM_1_MSC_OUT 0x02 + #define EPNUM_1_MSC_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG + // SAMG doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_0_CDC_NOTIF 0x81 + #define EPNUM_0_CDC_OUT 0x02 + #define EPNUM_0_CDC_IN 0x83 + + #define EPNUM_0_MIDI_OUT 0x04 + #define EPNUM_0_MIDI_IN 0x85 + + #define EPNUM_1_MSC_OUT 0x01 + #define EPNUM_1_MSC_IN 0x82 + +#else + #define EPNUM_0_CDC_NOTIF 0x81 + #define EPNUM_0_CDC_OUT 0x02 + #define EPNUM_0_CDC_IN 0x82 + + #define EPNUM_0_MIDI_OUT 0x03 + #define EPNUM_0_MIDI_IN 0x83 + + #define EPNUM_1_MSC_OUT 0x01 + #define EPNUM_1_MSC_IN 0x81 +#endif + +uint8_t const desc_configuration_0[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_0_NUM_TOTAL, 0, CONFIG_0_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_0_NUM_CDC, 0, EPNUM_0_CDC_NOTIF, 8, EPNUM_0_CDC_OUT, EPNUM_0_CDC_IN, 64), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), +}; + + +uint8_t const desc_configuraiton_1[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_1_NUM_TOTAL, 0, CONFIG_1_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_1_NUM_MSC, 0, EPNUM_1_MSC_OUT, EPNUM_1_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), +}; + + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return mode ? desc_configuraiton_1 : desc_configuration_0; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/hid_boot_interface/CMakeLists.txt b/tinyusb/examples/device/hid_boot_interface/CMakeLists.txt new file mode 100755 index 00000000..abc4d91d --- /dev/null +++ b/tinyusb/examples/device/hid_boot_interface/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/hid_boot_interface/Makefile b/tinyusb/examples/device/hid_boot_interface/Makefile new file mode 100755 index 00000000..138c2784 --- /dev/null +++ b/tinyusb/examples/device/hid_boot_interface/Makefile @@ -0,0 +1,15 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += \ + src/main.c \ + src/usb_descriptors.c + +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/hid_boot_interface/src/main.c b/tinyusb/examples/device/hid_boot_interface/src/main.c new file mode 100755 index 00000000..e5e2f685 --- /dev/null +++ b/tinyusb/examples/device/hid_boot_interface/src/main.c @@ -0,0 +1,255 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); +void hid_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + + hid_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// USB HID +//--------------------------------------------------------------------+ + +// Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..) +// tud_hid_report_complete_cb() is used to send the next report after previous one is complete +void hid_task(void) +{ + // Poll every 10ms + const uint32_t interval_ms = 10; + static uint32_t start_ms = 0; + + if ( board_millis() - start_ms < interval_ms) return; // not enough time + start_ms += interval_ms; + + uint32_t const btn = board_button_read(); + + if ( tud_suspended() && btn ) + { + // Wake up host if we are in suspend mode + // and REMOTE_WAKEUP feature is enabled by host + tud_remote_wakeup(); + } + else + { + // keyboard interface + if ( tud_hid_n_ready(ITF_NUM_KEYBOARD) ) + { + // used to avoid send multiple consecutive zero report for keyboard + static bool has_keyboard_key = false; + + uint8_t const report_id = 0; + uint8_t const modifier = 0; + + if ( btn ) + { + uint8_t keycode[6] = { 0 }; + keycode[0] = HID_KEY_ARROW_RIGHT; + + tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, keycode); + has_keyboard_key = true; + }else + { + // send empty key report if previously has key pressed + if (has_keyboard_key) tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, NULL); + has_keyboard_key = false; + } + } + + // mouse interface + if ( tud_hid_n_ready(ITF_NUM_MOUSE) ) + { + if ( btn ) + { + uint8_t const report_id = 0; + uint8_t const button_mask = 0; + uint8_t const veritical = 0; + uint8_t const horizontal = 0; + int8_t const delta = 5; + + tud_hid_n_mouse_report(ITF_NUM_MOUSE, report_id, button_mask, delta, delta, veritical, horizontal); + } + } + } +} + +// Invoked when received SET_PROTOCOL request +// protocol is either HID_PROTOCOL_BOOT (0) or HID_PROTOCOL_REPORT (1) +void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) +{ + (void) instance; + (void) protocol; + + // nothing to do since we use the same compatible boot report for both Boot and Report mode. + // TOOD set a indicator for user +} + +// Invoked when sent REPORT successfully to host +// Application can use this to send the next report +// Note: For composite reports, report[0] is report ID +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len) +{ + (void) instance; + (void) report; + (void) len; + + // nothing to do +} + +// Invoked when received GET_REPORT control request +// Application must fill buffer report's content and return its length. +// Return zero will cause the stack to STALL request +uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) +{ + // TODO not Implemented + (void) instance; + (void) report_id; + (void) report_type; + (void) buffer; + (void) reqlen; + + return 0; +} + +// Invoked when received SET_REPORT control request or +// received data on OUT endpoint ( Report ID = 0, Type = 0 ) +void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) +{ + (void) report_id; + + // keyboard interface + if (instance == ITF_NUM_KEYBOARD) + { + // Set keyboard LED e.g Capslock, Numlock etc... + if (report_type == HID_REPORT_TYPE_OUTPUT) + { + // bufsize should be (at least) 1 + if ( bufsize < 1 ) return; + + uint8_t const kbd_leds = buffer[0]; + + if (kbd_leds & KEYBOARD_LED_CAPSLOCK) + { + // Capslock On: disable blink, turn led on + blink_interval_ms = 0; + board_led_write(true); + }else + { + // Caplocks Off: back to normal blink + board_led_write(false); + blink_interval_ms = BLINK_MOUNTED; + } + } + } +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // blink is disabled + if (!blink_interval_ms) return; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/hid_boot_interface/src/tusb_config.h b/tinyusb/examples/device/hid_boot_interface/src/tusb_config.h new file mode 100755 index 00000000..59fb9962 --- /dev/null +++ b/tinyusb/examples/device/hid_boot_interface/src/tusb_config.h @@ -0,0 +1,111 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_HID 2 // 1 for boot keyboard, 1 for boot mouse +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// HID buffer size Should be sufficient to hold ID (if any) + Data +#define CFG_TUD_HID_EP_BUFSIZE 8 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.c b/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.c new file mode 100755 index 00000000..3fa48d98 --- /dev/null +++ b/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -0,0 +1,180 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "usb_descriptors.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// HID Report Descriptor +//--------------------------------------------------------------------+ + +uint8_t const desc_hid_keyboard_report[] = +{ + TUD_HID_REPORT_DESC_KEYBOARD() +}; + +uint8_t const desc_hid_mouse_report[] = +{ + TUD_HID_REPORT_DESC_MOUSE() +}; + +// Invoked when received GET HID REPORT DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance) +{ + return (instance == 0) ? desc_hid_keyboard_report : desc_hid_mouse_report; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + 2*TUD_HID_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 1 Interrupt, 2 Bulk, 3 Iso, 4 Interrupt, 5 Bulk etc ... + #define EPNUM_KEYBOARD 0x81 + #define EPNUM_MOUSE 0x84 +#else + #define EPNUM_KEYBOARD 0x81 + #define EPNUM_MOUSE 0x82 +#endif + +uint8_t const desc_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval + TUD_HID_DESCRIPTOR(ITF_NUM_KEYBOARD, 0, HID_ITF_PROTOCOL_KEYBOARD, sizeof(desc_hid_keyboard_report), EPNUM_KEYBOARD, CFG_TUD_HID_EP_BUFSIZE, 10), + + // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval + TUD_HID_DESCRIPTOR(ITF_NUM_MOUSE, 0, HID_ITF_PROTOCOL_MOUSE, sizeof(desc_hid_mouse_report), EPNUM_MOUSE, CFG_TUD_HID_EP_BUFSIZE, 10) +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.h b/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.h new file mode 100755 index 00000000..57cf0e2c --- /dev/null +++ b/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.h @@ -0,0 +1,35 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ + +enum +{ + ITF_NUM_KEYBOARD, + ITF_NUM_MOUSE, + ITF_NUM_TOTAL +}; + +#endif diff --git a/tinyusb/examples/device/hid_composite/CMakeLists.txt b/tinyusb/examples/device/hid_composite/CMakeLists.txt new file mode 100755 index 00000000..abc4d91d --- /dev/null +++ b/tinyusb/examples/device/hid_composite/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/hid_composite/Makefile b/tinyusb/examples/device/hid_composite/Makefile new file mode 100755 index 00000000..69b633fe --- /dev/null +++ b/tinyusb/examples/device/hid_composite/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/hid_composite/src/main.c b/tinyusb/examples/device/hid_composite/src/main.c new file mode 100755 index 00000000..fd25e620 --- /dev/null +++ b/tinyusb/examples/device/hid_composite/src/main.c @@ -0,0 +1,302 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); +void hid_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + + hid_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// USB HID +//--------------------------------------------------------------------+ + +static void send_hid_report(uint8_t report_id, uint32_t btn) +{ + // skip if hid is not ready yet + if ( !tud_hid_ready() ) return; + + switch(report_id) + { + case REPORT_ID_KEYBOARD: + { + // use to avoid send multiple consecutive zero report for keyboard + static bool has_keyboard_key = false; + + if ( btn ) + { + uint8_t keycode[6] = { 0 }; + keycode[0] = HID_KEY_A; + + tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, keycode); + has_keyboard_key = true; + }else + { + // send empty key report if previously has key pressed + if (has_keyboard_key) tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL); + has_keyboard_key = false; + } + } + break; + + case REPORT_ID_MOUSE: + { + int8_t const delta = 5; + + // no button, right + down, no scroll, no pan + tud_hid_mouse_report(REPORT_ID_MOUSE, 0x00, delta, delta, 0, 0); + } + break; + + case REPORT_ID_CONSUMER_CONTROL: + { + // use to avoid send multiple consecutive zero report + static bool has_consumer_key = false; + + if ( btn ) + { + // volume down + uint16_t volume_down = HID_USAGE_CONSUMER_VOLUME_DECREMENT; + tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &volume_down, 2); + has_consumer_key = true; + }else + { + // send empty key report (release key) if previously has key pressed + uint16_t empty_key = 0; + if (has_consumer_key) tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2); + has_consumer_key = false; + } + } + break; + + case REPORT_ID_GAMEPAD: + { + // use to avoid send multiple consecutive zero report for keyboard + static bool has_gamepad_key = false; + + hid_gamepad_report_t report = + { + .x = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0, + .hat = 0, .buttons = 0 + }; + + if ( btn ) + { + report.hat = GAMEPAD_HAT_UP; + report.buttons = GAMEPAD_BUTTON_A; + tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); + + has_gamepad_key = true; + }else + { + report.hat = GAMEPAD_HAT_CENTERED; + report.buttons = 0; + if (has_gamepad_key) tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); + has_gamepad_key = false; + } + } + break; + + default: break; + } +} + +// Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..) +// tud_hid_report_complete_cb() is used to send the next report after previous one is complete +void hid_task(void) +{ + // Poll every 10ms + const uint32_t interval_ms = 10; + static uint32_t start_ms = 0; + + if ( board_millis() - start_ms < interval_ms) return; // not enough time + start_ms += interval_ms; + + uint32_t const btn = board_button_read(); + + // Remote wakeup + if ( tud_suspended() && btn ) + { + // Wake up host if we are in suspend mode + // and REMOTE_WAKEUP feature is enabled by host + tud_remote_wakeup(); + }else + { + // Send the 1st of report chain, the rest will be sent by tud_hid_report_complete_cb() + send_hid_report(REPORT_ID_KEYBOARD, btn); + } +} + +// Invoked when sent REPORT successfully to host +// Application can use this to send the next report +// Note: For composite reports, report[0] is report ID +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len) +{ + (void) instance; + (void) len; + + uint8_t next_report_id = report[0] + 1; + + if (next_report_id < REPORT_ID_COUNT) + { + send_hid_report(next_report_id, board_button_read()); + } +} + +// Invoked when received GET_REPORT control request +// Application must fill buffer report's content and return its length. +// Return zero will cause the stack to STALL request +uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) +{ + // TODO not Implemented + (void) instance; + (void) report_id; + (void) report_type; + (void) buffer; + (void) reqlen; + + return 0; +} + +// Invoked when received SET_REPORT control request or +// received data on OUT endpoint ( Report ID = 0, Type = 0 ) +void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) +{ + (void) instance; + + if (report_type == HID_REPORT_TYPE_OUTPUT) + { + // Set keyboard LED e.g Capslock, Numlock etc... + if (report_id == REPORT_ID_KEYBOARD) + { + // bufsize should be (at least) 1 + if ( bufsize < 1 ) return; + + uint8_t const kbd_leds = buffer[0]; + + if (kbd_leds & KEYBOARD_LED_CAPSLOCK) + { + // Capslock On: disable blink, turn led on + blink_interval_ms = 0; + board_led_write(true); + }else + { + // Caplocks Off: back to normal blink + board_led_write(false); + blink_interval_ms = BLINK_MOUNTED; + } + } + } +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // blink is disabled + if (!blink_interval_ms) return; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/hid_composite/src/tusb_config.h b/tinyusb/examples/device/hid_composite/src/tusb_config.h new file mode 100755 index 00000000..868424e6 --- /dev/null +++ b/tinyusb/examples/device/hid_composite/src/tusb_config.h @@ -0,0 +1,111 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_HID 1 +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// HID buffer size Should be sufficient to hold ID (if any) + Data +#define CFG_TUD_HID_EP_BUFSIZE 16 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/hid_composite/src/usb_descriptors.c b/tinyusb/examples/device/hid_composite/src/usb_descriptors.c new file mode 100755 index 00000000..b9a6e729 --- /dev/null +++ b/tinyusb/examples/device/hid_composite/src/usb_descriptors.c @@ -0,0 +1,174 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "usb_descriptors.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// HID Report Descriptor +//--------------------------------------------------------------------+ + +uint8_t const desc_hid_report[] = +{ + TUD_HID_REPORT_DESC_KEYBOARD( HID_REPORT_ID(REPORT_ID_KEYBOARD )), + TUD_HID_REPORT_DESC_MOUSE ( HID_REPORT_ID(REPORT_ID_MOUSE )), + TUD_HID_REPORT_DESC_CONSUMER( HID_REPORT_ID(REPORT_ID_CONSUMER_CONTROL )), + TUD_HID_REPORT_DESC_GAMEPAD ( HID_REPORT_ID(REPORT_ID_GAMEPAD )) +}; + +// Invoked when received GET HID REPORT DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance) +{ + (void) instance; + return desc_hid_report; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_HID, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN) + +#define EPNUM_HID 0x81 + +uint8_t const desc_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval + TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 5) +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/hid_composite/src/usb_descriptors.h b/tinyusb/examples/device/hid_composite/src/usb_descriptors.h new file mode 100755 index 00000000..ca8925ad --- /dev/null +++ b/tinyusb/examples/device/hid_composite/src/usb_descriptors.h @@ -0,0 +1,37 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ + +enum +{ + REPORT_ID_KEYBOARD = 1, + REPORT_ID_MOUSE, + REPORT_ID_CONSUMER_CONTROL, + REPORT_ID_GAMEPAD, + REPORT_ID_COUNT +}; + +#endif /* USB_DESCRIPTORS_H_ */ diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_CXD56 b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_CXD56 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_CXD56 diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_EFM32GG12 b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_EFM32GG12 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_EFM32GG12 diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103 b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103 diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_RP2040 b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_RP2040 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_RP2040 diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMD11 b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMD11 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMD11 diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI diff --git a/tinyusb/examples/device/hid_composite_freertos/CMakeLists.txt b/tinyusb/examples/device/hid_composite_freertos/CMakeLists.txt new file mode 100755 index 00000000..ed734b95 --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/CMakeLists.txt @@ -0,0 +1,17 @@ +cmake_minimum_required(VERSION 3.5) + +# use BOARD-Directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) +set(PROJECT ${BOARD}-${PROJECT}) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY MATCHES "^esp32s[2-3]") + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + project(${PROJECT}) +else() + message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") +endif() diff --git a/tinyusb/examples/device/hid_composite_freertos/Makefile b/tinyusb/examples/device/hid_composite_freertos/Makefile new file mode 100755 index 00000000..1c195959 --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/Makefile @@ -0,0 +1,29 @@ +DEPS_SUBMODULES += lib/FreeRTOS-Kernel + +include ../../../tools/top.mk +include ../../make.mk + +FREERTOS_SRC = lib/FreeRTOS-Kernel + +INC += \ + src \ + $(TOP)/hw \ + $(TOP)/$(FREERTOS_SRC)/include \ + $(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT) + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +# FreeRTOS source, all files in port folder +SRC_C += \ + $(FREERTOS_SRC)/list.c \ + $(FREERTOS_SRC)/queue.c \ + $(FREERTOS_SRC)/tasks.c \ + $(FREERTOS_SRC)/timers.c \ + $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) + +# FreeRTOS (lto + Os) linker issue +LDFLAGS += -Wl,--undefined=vTaskSwitchContext + +include ../../rules.mk diff --git a/tinyusb/examples/device/hid_composite_freertos/sdkconfig.defaults b/tinyusb/examples/device/hid_composite_freertos/sdkconfig.defaults new file mode 100755 index 00000000..83871619 --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/sdkconfig.defaults @@ -0,0 +1,3 @@ +CONFIG_IDF_CMAKE=y +CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y diff --git a/tinyusb/examples/device/hid_composite_freertos/src/CMakeLists.txt b/tinyusb/examples/device/hid_composite_freertos/src/CMakeLists.txt new file mode 100755 index 00000000..6d4a3c1e --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/src/CMakeLists.txt @@ -0,0 +1,32 @@ +idf_component_register(SRCS "main.c" "usb_descriptors.c" + INCLUDE_DIRS "." + REQUIRES freertos soc) + +file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake) + +if(EXISTS ${board_cmake}) + include(${board_cmake}) +endif() + +idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH) +target_include_directories(${COMPONENT_TARGET} PUBLIC + "${FREERTOS_ORIG_INCLUDE_PATH}" + "${TOP}/hw" + "${TOP}/src" +) + +target_sources(${COMPONENT_TARGET} PUBLIC + "${TOP}/src/tusb.c" + "${TOP}/src/common/tusb_fifo.c" + "${TOP}/src/device/usbd.c" + "${TOP}/src/device/usbd_control.c" + "${TOP}/src/class/cdc/cdc_device.c" + "${TOP}/src/class/dfu/dfu_rt_device.c" + "${TOP}/src/class/hid/hid_device.c" + "${TOP}/src/class/midi/midi_device.c" + "${TOP}/src/class/msc/msc_device.c" + "${TOP}/src/class/net/net_device.c" + "${TOP}/src/class/usbtmc/usbtmc_device.c" + "${TOP}/src/class/vendor/vendor_device.c" + "${TOP}/src/portable/espressif/esp32sx/dcd_esp32sx.c" +) diff --git a/tinyusb/examples/device/hid_composite_freertos/src/FreeRTOSConfig.h b/tinyusb/examples/device/hid_composite_freertos/src/FreeRTOSConfig.h new file mode 100755 index 00000000..568b27a1 --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/src/FreeRTOSConfig.h @@ -0,0 +1,182 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// Include MCU header +#include "bsp/board_mcu.h" + +extern uint32_t SystemCoreClock; + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( 0*1024 ) // dynamic is not used +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 0 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +#ifdef __RX__ +/* Renesas RX series */ +#define vSoftwareInterruptISR INT_Excep_ICU_SWINT +#define vTickISR INT_Excep_CMT0_CMI0 +#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) +#define configKERNEL_INTERRUPT_PRIORITY 1 +#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 + +#else + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ +#if defined(__NVIC_PRIO_BITS) + // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h + #define configPRIO_BITS __NVIC_PRIO_BITS +#elif defined(__ECLIC_INTCTLBITS) + // RISC-V Bumblebee core from nuclei + #define configPRIO_BITS __ECLIC_INTCTLBITS +#else + #error "FreeRTOS configPRIO_BITS to be defined" +#endif + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) + +/* The highest interrupt priority that can be used by any interrupt service +routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL +INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER +PRIORITY THAN THIS! (higher priorities are lower numeric values. */ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 + +/* Interrupt priorities used by the kernel port layer itself. These are generic +to all Cortex-M ports, and do not rely on any particular library functions. */ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! +See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +#endif + +#endif /* __FREERTOS_CONFIG__H */ diff --git a/tinyusb/examples/device/hid_composite_freertos/src/freertos_hook.c b/tinyusb/examples/device/hid_composite_freertos/src/freertos_hook.c new file mode 100755 index 00000000..ab885947 --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/src/freertos_hook.c @@ -0,0 +1,114 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +//--------------------------------------------------------------------+ +// INCLUDE +//--------------------------------------------------------------------+ +#include "FreeRTOS.h" +#include "task.h" +#include "common/tusb_common.h" + + +void vApplicationMallocFailedHook(void) +{ + taskDISABLE_INTERRUPTS(); + TU_ASSERT(false, ); +} + +void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) +{ + (void) pxTask; + (void) pcTaskName; + + taskDISABLE_INTERRUPTS(); + TU_ASSERT(false, ); +} + +/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an + * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is + * used by the Idle task. */ +void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) +{ + /* If the buffers to be provided to the Idle task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xIdleTaskTCB; + static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Idle task's + state will be stored. */ + *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; + + /* Pass out the array that will be used as the Idle task's stack. */ + *ppxIdleTaskStackBuffer = uxIdleTaskStack; + + /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; +} + +/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the + * application must provide an implementation of vApplicationGetTimerTaskMemory() + * to provide the memory that is used by the Timer service task. */ +void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize ) +{ + /* If the buffers to be provided to the Timer task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xTimerTaskTCB; + static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Timer + task's state will be stored. */ + *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; + + /* Pass out the array that will be used as the Timer task's stack. */ + *ppxTimerTaskStackBuffer = uxTimerTaskStack; + + /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */ + *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; +} + +#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X +#include "iodefine.h" +void vApplicationSetupTimerInterrupt(void) +{ + /* Enable CMT0 */ + SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); + MSTP(CMT0) = 0; + SYSTEM.PRCR.WORD = (0xA5u<<8); + + CMT0.CMCNT = 0; + CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); + CMT0.CMCR.WORD = TU_BIT(6) | 2; + IR(CMT0, CMI0) = 0; + IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY; + IEN(CMT0, CMI0) = 1; + CMT.CMSTR0.BIT.STR0 = 1; +} +#endif diff --git a/tinyusb/examples/device/hid_composite_freertos/src/main.c b/tinyusb/examples/device/hid_composite_freertos/src/main.c new file mode 100755 index 00000000..9c9830e3 --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/src/main.c @@ -0,0 +1,355 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "FreeRTOS.h" +#include "task.h" +#include "timers.h" +#include "queue.h" +#include "semphr.h" + +#include "bsp/board.h" +#include "tusb.h" + +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +// static timer +StaticTimer_t blinky_tmdef; +TimerHandle_t blinky_tm; + +// static task for usbd +#if CFG_TUSB_DEBUG + #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE) +#else + #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) +#endif + +StackType_t usb_device_stack[USBD_STACK_SIZE]; +StaticTask_t usb_device_taskdef; + +// static task for hid +#define HID_STACK_SZIE configMINIMAL_STACK_SIZE +StackType_t hid_stack[HID_STACK_SZIE]; +StaticTask_t hid_taskdef; + + +void led_blinky_cb(TimerHandle_t xTimer); +void usb_device_task(void* param); +void hid_task(void* params); + +//--------------------------------------------------------------------+ +// Main +//--------------------------------------------------------------------+ + +int main(void) +{ + board_init(); + + // soft timer for blinky + blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); + xTimerStart(blinky_tm, 0); + + // Create a task for tinyusb device stack + (void) xTaskCreateStatic( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); + + // Create HID task + (void) xTaskCreateStatic( hid_task, "hid", HID_STACK_SZIE, NULL, configMAX_PRIORITIES-2, hid_stack, &hid_taskdef); + + // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#if CFG_TUSB_MCU != OPT_MCU_ESP32S2 && CFG_TUSB_MCU != OPT_MCU_ESP32S3 + vTaskStartScheduler(); +#endif + + return 0; +} + +#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +void app_main(void) +{ + main(); +} +#endif + +// USB Device Driver task +// This top level thread process all usb events and invoke callbacks +void usb_device_task(void* param) +{ + (void) param; + + // This should be called after scheduler/kernel is started. + // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. + tusb_init(); + + // RTOS forever loop + while (1) + { + // tinyusb device task + tud_task(); + } +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0); +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), 0); +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_SUSPENDED), 0); +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0); +} + +//--------------------------------------------------------------------+ +// USB HID +//--------------------------------------------------------------------+ + +static void send_hid_report(uint8_t report_id, uint32_t btn) +{ + // skip if hid is not ready yet + if ( !tud_hid_ready() ) return; + + switch(report_id) + { + case REPORT_ID_KEYBOARD: + { + // use to avoid send multiple consecutive zero report for keyboard + static bool has_keyboard_key = false; + + if ( btn ) + { + uint8_t keycode[6] = { 0 }; + keycode[0] = HID_KEY_A; + + tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, keycode); + has_keyboard_key = true; + }else + { + // send empty key report if previously has key pressed + if (has_keyboard_key) tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL); + has_keyboard_key = false; + } + } + break; + + case REPORT_ID_MOUSE: + { + int8_t const delta = 5; + + // no button, right + down, no scroll, no pan + tud_hid_mouse_report(REPORT_ID_MOUSE, 0x00, delta, delta, 0, 0); + } + break; + + case REPORT_ID_CONSUMER_CONTROL: + { + // use to avoid send multiple consecutive zero report + static bool has_consumer_key = false; + + if ( btn ) + { + // volume down + uint16_t volume_down = HID_USAGE_CONSUMER_VOLUME_DECREMENT; + tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &volume_down, 2); + has_consumer_key = true; + }else + { + // send empty key report (release key) if previously has key pressed + uint16_t empty_key = 0; + if (has_consumer_key) tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2); + has_consumer_key = false; + } + } + break; + + case REPORT_ID_GAMEPAD: + { + // use to avoid send multiple consecutive zero report for keyboard + static bool has_gamepad_key = false; + + hid_gamepad_report_t report = + { + .x = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0, + .hat = 0, .buttons = 0 + }; + + if ( btn ) + { + report.hat = GAMEPAD_HAT_UP; + report.buttons = GAMEPAD_BUTTON_A; + tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); + + has_gamepad_key = true; + }else + { + report.hat = GAMEPAD_HAT_CENTERED; + report.buttons = 0; + if (has_gamepad_key) tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); + has_gamepad_key = false; + } + } + break; + + default: break; + } +} + +void hid_task(void* param) +{ + (void) param; + + while(1) + { + // Poll every 10ms + vTaskDelay(pdMS_TO_TICKS(10)); + + uint32_t const btn = board_button_read(); + + // Remote wakeup + if ( tud_suspended() && btn ) + { + // Wake up host if we are in suspend mode + // and REMOTE_WAKEUP feature is enabled by host + tud_remote_wakeup(); + } + else + { + // Send the 1st of report chain, the rest will be sent by tud_hid_report_complete_cb() + send_hid_report(REPORT_ID_KEYBOARD, btn); + } + } +} + +// Invoked when sent REPORT successfully to host +// Application can use this to send the next report +// Note: For composite reports, report[0] is report ID +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len) +{ + (void) instance; + (void) len; + + uint8_t next_report_id = report[0] + 1; + + if (next_report_id < REPORT_ID_COUNT) + { + send_hid_report(next_report_id, board_button_read()); + } +} + + +// Invoked when received GET_REPORT control request +// Application must fill buffer report's content and return its length. +// Return zero will cause the stack to STALL request +uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) +{ + // TODO not Implemented + (void) instance; + (void) report_id; + (void) report_type; + (void) buffer; + (void) reqlen; + + return 0; +} + +// Invoked when received SET_REPORT control request or +// received data on OUT endpoint ( Report ID = 0, Type = 0 ) +void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) +{ + (void) instance; + + if (report_type == HID_REPORT_TYPE_OUTPUT) + { + // Set keyboard LED e.g Capslock, Numlock etc... + if (report_id == REPORT_ID_KEYBOARD) + { + // bufsize should be (at least) 1 + if ( bufsize < 1 ) return; + + uint8_t const kbd_leds = buffer[0]; + + if (kbd_leds & KEYBOARD_LED_CAPSLOCK) + { + // Capslock On: disable blink, turn led on + xTimerStop(blinky_tm, portMAX_DELAY); + board_led_write(true); + }else + { + // Caplocks Off: back to normal blink + board_led_write(false); + xTimerStart(blinky_tm, portMAX_DELAY); + } + } + } +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinky_cb(TimerHandle_t xTimer) +{ + (void) xTimer; + static bool led_state = false; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/hid_composite_freertos/src/tusb_config.h b/tinyusb/examples/device/hid_composite_freertos/src/tusb_config.h new file mode 100755 index 00000000..4b0458ef --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/src/tusb_config.h @@ -0,0 +1,110 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +// This examples use FreeRTOS +#define CFG_TUSB_OS OPT_OS_FREERTOS + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_HID 1 +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// HID buffer size Should be sufficient to hold ID (if any) + Data +#define CFG_TUD_HID_EP_BUFSIZE 16 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.c b/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.c new file mode 100755 index 00000000..b9a6e729 --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -0,0 +1,174 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "usb_descriptors.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// HID Report Descriptor +//--------------------------------------------------------------------+ + +uint8_t const desc_hid_report[] = +{ + TUD_HID_REPORT_DESC_KEYBOARD( HID_REPORT_ID(REPORT_ID_KEYBOARD )), + TUD_HID_REPORT_DESC_MOUSE ( HID_REPORT_ID(REPORT_ID_MOUSE )), + TUD_HID_REPORT_DESC_CONSUMER( HID_REPORT_ID(REPORT_ID_CONSUMER_CONTROL )), + TUD_HID_REPORT_DESC_GAMEPAD ( HID_REPORT_ID(REPORT_ID_GAMEPAD )) +}; + +// Invoked when received GET HID REPORT DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance) +{ + (void) instance; + return desc_hid_report; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_HID, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN) + +#define EPNUM_HID 0x81 + +uint8_t const desc_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval + TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 5) +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.h b/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.h new file mode 100755 index 00000000..ca8925ad --- /dev/null +++ b/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.h @@ -0,0 +1,37 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ + +enum +{ + REPORT_ID_KEYBOARD = 1, + REPORT_ID_MOUSE, + REPORT_ID_CONSUMER_CONTROL, + REPORT_ID_GAMEPAD, + REPORT_ID_COUNT +}; + +#endif /* USB_DESCRIPTORS_H_ */ diff --git a/tinyusb/examples/device/hid_generic_inout/CMakeLists.txt b/tinyusb/examples/device/hid_generic_inout/CMakeLists.txt new file mode 100755 index 00000000..abc4d91d --- /dev/null +++ b/tinyusb/examples/device/hid_generic_inout/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/hid_generic_inout/Makefile b/tinyusb/examples/device/hid_generic_inout/Makefile new file mode 100755 index 00000000..69b633fe --- /dev/null +++ b/tinyusb/examples/device/hid_generic_inout/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/hid_generic_inout/boards.js b/tinyusb/examples/device/hid_generic_inout/boards.js new file mode 100755 index 00000000..6b78231a --- /dev/null +++ b/tinyusb/examples/device/hid_generic_inout/boards.js @@ -0,0 +1,4 @@ +module.exports = { + "Adafruit Boards":[0x239A,0xFFFF], + "TinyUSB example":[0xCAFE,0xFFFF] +} diff --git a/tinyusb/examples/device/hid_generic_inout/hid_test.js b/tinyusb/examples/device/hid_generic_inout/hid_test.js new file mode 100755 index 00000000..daa958fd --- /dev/null +++ b/tinyusb/examples/device/hid_generic_inout/hid_test.js @@ -0,0 +1,68 @@ +// IMPORTANT: install the dependency via 'npm i node-hid' in the same location as the script +// If the install fails on windows you may need to run 'npm i -g windows-build-tools' first to be able to compile native code needed for this library + +var HID = require('node-hid'); +var os = require('os') +// list of supported devices +var boards = require('./boards.js') +var devices = HID.devices(); + +// this will choose any device found in the boards.js file +var deviceInfo = devices.find(anySupportedBoard); +var reportLen = 64; + +var message = "Hello World!" + +// Turn our string into an array of integers e.g. 'ascii codes', though charCodeAt spits out UTF-16 +// This means if you have characters in your string that are not Latin-1 you will have to add additional logic for character codes above 255 +var messageBuffer = Array.from(message, function(c){return c.charCodeAt(0)}); + +// HIDAPI requires us to prepend a 0 for single hid report as dummy reportID +messageBuffer.unshift(0) + +// Some OSes expect that you always send a buffer that equals your report length +// So lets fill up the rest of the buffer with zeros +var paddingBuf = Array(reportLen-messageBuffer.length); +paddingBuf.fill(0) +messageBuffer = messageBuffer.concat(paddingBuf) + +// check if we actually found a device and if so send our messageBuffer to it +if( deviceInfo ) { + console.log(deviceInfo) + var device = new HID.HID( deviceInfo.path ); + + // register an event listener for data coming from the device + device.on("data", function(data) { + // Print what we get from the device + console.log(data.toString('ascii')); + }); + + // the same for any error that occur + device.on("error", function(err) {console.log(err)}); + + // send our message to the device every 500ms + setInterval(function () { + device.write(messageBuffer); + },500) +} + + +function anySupportedBoard(d) { + + for (var key in boards) { + if (boards.hasOwnProperty(key)) { + if (isDevice(boards[key],d)) { + console.log("Found " + d.product); + return true; + } + } + } + return false; +} + + +function isDevice(board,d){ + // product id 0xff is matches all + return d.vendorId==board[0] && (d.productId==board[1] || board[1] == 0xFFFF); +} + diff --git a/tinyusb/examples/device/hid_generic_inout/hid_test.py b/tinyusb/examples/device/hid_generic_inout/hid_test.py new file mode 100755 index 00000000..a42930fb --- /dev/null +++ b/tinyusb/examples/device/hid_generic_inout/hid_test.py @@ -0,0 +1,20 @@ +# Install python3 HID package https://pypi.org/project/hid/ +import hid + +USB_VID = 0xcafe + +print("Openning HID device with VID = 0x%X" % USB_VID) + +for dict in hid.enumerate(USB_VID): + print(dict) + dev = hid.Device(dict['vendor_id'], dict['product_id']) + if dev: + while True: + # Get input from console and encode to UTF8 for array of chars. + # hid generic inout is single report therefore by HIDAPI requirement + # it must be preceeded with 0x00 as dummy reportID + str_out = b'\x00' + str_out += input("Send text to HID Device : ").encode('utf-8') + dev.write(str_out) + str_in = dev.read(64) + print("Received from HID Device:", str_in, '\n') diff --git a/tinyusb/examples/device/hid_generic_inout/src/main.c b/tinyusb/examples/device/hid_generic_inout/src/main.c new file mode 100755 index 00000000..32185560 --- /dev/null +++ b/tinyusb/examples/device/hid_generic_inout/src/main.c @@ -0,0 +1,171 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +/* This example demonstrate HID Generic raw Input & Output. + * It will receive data from Host (In endpoint) and echo back (Out endpoint). + * HID Report descriptor use vendor for usage page (using template TUD_HID_REPORT_DESC_GENERIC_INOUT) + * + * There are 2 ways to test the sketch + * 1. Using nodejs + * - Install nodejs and npm to your PC + * + * - Install excellent node-hid (https://github.com/node-hid/node-hid) by + * $ npm install node-hid + * + * - Run provided hid test script + * $ node hid_test.js + * + * 2. Using python + * - Install `hid` package (https://pypi.org/project/hid/) by + * $ pip install hid + * + * - hid package replies on hidapi (https://github.com/libusb/hidapi) for backend, + * which already available in Linux. However on windows, you may need to download its dlls from their release page and + * copy it over to folder where python is installed. + * + * - Run provided hid test script to send and receive data to this device. + * $ python3 hid_test.py + */ + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// USB HID +//--------------------------------------------------------------------+ + +// Invoked when received GET_REPORT control request +// Application must fill buffer report's content and return its length. +// Return zero will cause the stack to STALL request +uint16_t tud_hid_get_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) +{ + // TODO not Implemented + (void) itf; + (void) report_id; + (void) report_type; + (void) buffer; + (void) reqlen; + + return 0; +} + +// Invoked when received SET_REPORT control request or +// received data on OUT endpoint ( Report ID = 0, Type = 0 ) +void tud_hid_set_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) +{ + // This example doesn't use multiple report and report ID + (void) itf; + (void) report_id; + (void) report_type; + + // echo back anything we received from host + tud_hid_report(0, buffer, bufsize); +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/hid_generic_inout/src/tusb_config.h b/tinyusb/examples/device/hid_generic_inout/src/tusb_config.h new file mode 100755 index 00000000..1b8b91c4 --- /dev/null +++ b/tinyusb/examples/device/hid_generic_inout/src/tusb_config.h @@ -0,0 +1,111 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 1 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// HID buffer size Should be sufficient to hold ID (if any) + Data +#define CFG_TUD_HID_EP_BUFSIZE 64 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/hid_generic_inout/src/usb_descriptors.c b/tinyusb/examples/device/hid_generic_inout/src/usb_descriptors.c new file mode 100755 index 00000000..5a2f5ffd --- /dev/null +++ b/tinyusb/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -0,0 +1,170 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// HID Report Descriptor +//--------------------------------------------------------------------+ + +uint8_t const desc_hid_report[] = +{ + TUD_HID_REPORT_DESC_GENERIC_INOUT(CFG_TUD_HID_EP_BUFSIZE) +}; + +// Invoked when received GET HID REPORT DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) +{ + (void) itf; + return desc_hid_report; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_HID, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_HID_INOUT_DESC_LEN) + +#define EPNUM_HID 0x01 + +uint8_t const desc_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, protocol, report descriptor len, EP In & Out address, size & polling interval + TUD_HID_INOUT_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, 0x80 | EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 10) +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/hid_multiple_interface/CMakeLists.txt b/tinyusb/examples/device/hid_multiple_interface/CMakeLists.txt new file mode 100755 index 00000000..abc4d91d --- /dev/null +++ b/tinyusb/examples/device/hid_multiple_interface/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/hid_multiple_interface/Makefile b/tinyusb/examples/device/hid_multiple_interface/Makefile new file mode 100755 index 00000000..69b633fe --- /dev/null +++ b/tinyusb/examples/device/hid_multiple_interface/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/hid_multiple_interface/src/main.c b/tinyusb/examples/device/hid_multiple_interface/src/main.c new file mode 100755 index 00000000..7cb1d75a --- /dev/null +++ b/tinyusb/examples/device/hid_multiple_interface/src/main.c @@ -0,0 +1,207 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +// Interface index depends on the order in configuration descriptor +enum { + ITF_KEYBOARD = 0, + ITF_MOUSE = 1 +}; + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); +void hid_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + + hid_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// USB HID +//--------------------------------------------------------------------+ + +void hid_task(void) +{ + // Poll every 10ms + const uint32_t interval_ms = 10; + static uint32_t start_ms = 0; + + if ( board_millis() - start_ms < interval_ms) return; // not enough time + start_ms += interval_ms; + + uint32_t const btn = board_button_read(); + + // Remote wakeup + if ( tud_suspended() && btn ) + { + // Wake up host if we are in suspend mode + // and REMOTE_WAKEUP feature is enabled by host + tud_remote_wakeup(); + } + + /*------------- Keyboard -------------*/ + if ( tud_hid_n_ready(ITF_KEYBOARD) ) + { + // use to avoid send multiple consecutive zero report for keyboard + static bool has_key = false; + + if ( btn ) + { + uint8_t keycode[6] = { 0 }; + keycode[0] = HID_KEY_A; + + tud_hid_n_keyboard_report(ITF_KEYBOARD, 0, 0, keycode); + + has_key = true; + }else + { + // send empty key report if previously has key pressed + if (has_key) tud_hid_n_keyboard_report(ITF_KEYBOARD, 0, 0, NULL); + has_key = false; + } + } + + /*------------- Mouse -------------*/ + if ( tud_hid_n_ready(ITF_MOUSE) ) + { + if ( btn ) + { + int8_t const delta = 5; + + // no button, right + down, no scroll pan + tud_hid_n_mouse_report(ITF_MOUSE, 0, 0x00, delta, delta, 0, 0); + } + } +} + + +// Invoked when received GET_REPORT control request +// Application must fill buffer report's content and return its length. +// Return zero will cause the stack to STALL request +uint16_t tud_hid_get_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) +{ + // TODO not Implemented + (void) itf; + (void) report_id; + (void) report_type; + (void) buffer; + (void) reqlen; + + return 0; +} + +// Invoked when received SET_REPORT control request or +// received data on OUT endpoint ( Report ID = 0, Type = 0 ) +void tud_hid_set_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) +{ + // TODO set LED based on CAPLOCK, NUMLOCK etc... + (void) itf; + (void) report_id; + (void) report_type; + (void) buffer; + (void) bufsize; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/hid_multiple_interface/src/tusb_config.h b/tinyusb/examples/device/hid_multiple_interface/src/tusb_config.h new file mode 100755 index 00000000..a0aa17a9 --- /dev/null +++ b/tinyusb/examples/device/hid_multiple_interface/src/tusb_config.h @@ -0,0 +1,111 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_HID 2 +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// HID buffer size Should be sufficient to hold ID (if any) + Data +#define CFG_TUD_HID_EP_BUFSIZE 8 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/hid_multiple_interface/src/usb_descriptors.c b/tinyusb/examples/device/hid_multiple_interface/src/usb_descriptors.c new file mode 100755 index 00000000..9eef2150 --- /dev/null +++ b/tinyusb/examples/device/hid_multiple_interface/src/usb_descriptors.c @@ -0,0 +1,188 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// HID Report Descriptor +//--------------------------------------------------------------------+ + +uint8_t const desc_hid_report1[] = +{ + TUD_HID_REPORT_DESC_KEYBOARD() +}; + +uint8_t const desc_hid_report2[] = +{ + TUD_HID_REPORT_DESC_MOUSE() +}; + +// Invoked when received GET HID REPORT DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) +{ + if (itf == 0) + { + return desc_hid_report1; + } + else if (itf == 1) + { + return desc_hid_report2; + } + + return NULL; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_HID1, + ITF_NUM_HID2, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN + TUD_HID_DESC_LEN) + +#define EPNUM_HID1 0x81 +#define EPNUM_HID2 0x82 + +uint8_t const desc_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval + TUD_HID_DESCRIPTOR(ITF_NUM_HID1, 4, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report1), EPNUM_HID1, CFG_TUD_HID_EP_BUFSIZE, 10), + TUD_HID_DESCRIPTOR(ITF_NUM_HID2, 5, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report2), EPNUM_HID2, CFG_TUD_HID_EP_BUFSIZE, 10) +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID + "Keyboard Interface", // 4: Interface 1 String + "Mouse Interface", // 5: Interface 2 String +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/midi_test/CMakeLists.txt b/tinyusb/examples/device/midi_test/CMakeLists.txt new file mode 100755 index 00000000..abc4d91d --- /dev/null +++ b/tinyusb/examples/device/midi_test/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/midi_test/Makefile b/tinyusb/examples/device/midi_test/Makefile new file mode 100755 index 00000000..5a455078 --- /dev/null +++ b/tinyusb/examples/device/midi_test/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/midi_test/src/main.c b/tinyusb/examples/device/midi_test/src/main.c new file mode 100755 index 00000000..19374847 --- /dev/null +++ b/tinyusb/examples/device/midi_test/src/main.c @@ -0,0 +1,177 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +/* This MIDI example send sequence of note (on/off) repeatedly. To test on PC, you need to install + * synth software and midi connection management software. On + * - Linux (Ubuntu): install qsynth, qjackctl. Then connect TinyUSB output port to FLUID Synth input port + * - Windows: install MIDI-OX + * - MacOS: SimpleSynth + */ + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); +void midi_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + midi_task(); + } + + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// MIDI Task +//--------------------------------------------------------------------+ + +// Variable that holds the current position in the sequence. +uint32_t note_pos = 0; + +// Store example melody as an array of note values +uint8_t note_sequence[] = +{ + 74,78,81,86,90,93,98,102,57,61,66,69,73,78,81,85,88,92,97,100,97,92,88,85,81,78, + 74,69,66,62,57,62,66,69,74,78,81,86,90,93,97,102,97,93,90,85,81,78,73,68,64,61, + 56,61,64,68,74,78,81,86,90,93,98,102 +}; + +void midi_task(void) +{ + static uint32_t start_ms = 0; + + uint8_t const cable_num = 0; // MIDI jack associated with USB endpoint + uint8_t const channel = 0; // 0 for channel 1 + + // The MIDI interface always creates input and output port/jack descriptors + // regardless of these being used or not. Therefore incoming traffic should be read + // (possibly just discarded) to avoid the sender blocking in IO + uint8_t packet[4]; + while ( tud_midi_available() ) tud_midi_packet_read(packet); + + // send note periodically + if (board_millis() - start_ms < 286) return; // not enough time + start_ms += 286; + + // Previous positions in the note sequence. + int previous = note_pos - 1; + + // If we currently are at position 0, set the + // previous position to the last note in the sequence. + if (previous < 0) previous = sizeof(note_sequence) - 1; + + // Send Note On for current position at full velocity (127) on channel 1. + uint8_t note_on[3] = { 0x90 | channel, note_sequence[note_pos], 127 }; + tud_midi_stream_write(cable_num, note_on, 3); + + // Send Note Off for previous note. + uint8_t note_off[3] = { 0x80 | channel, note_sequence[previous], 0}; + tud_midi_stream_write(cable_num, note_off, 3); + + // Increment position + note_pos++; + + // If we are at the end of the sequence, start over. + if (note_pos >= sizeof(note_sequence)) note_pos = 0; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/midi_test/src/tusb_config.h b/tinyusb/examples/device/midi_test/src/tusb_config.h new file mode 100755 index 00000000..61b9b655 --- /dev/null +++ b/tinyusb/examples/device/midi_test/src/tusb_config.h @@ -0,0 +1,112 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 1 +#define CFG_TUD_VENDOR 0 + +// MIDI FIFO size of TX and RX +#define CFG_TUD_MIDI_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_MIDI_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/midi_test/src/usb_descriptors.c b/tinyusb/examples/device/midi_test/src/usb_descriptors.c new file mode 100755 index 00000000..9d92a775 --- /dev/null +++ b/tinyusb/examples/device/midi_test/src/usb_descriptors.c @@ -0,0 +1,177 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_MIDI = 0, + ITF_NUM_MIDI_STREAMING, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_MIDI_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_MIDI 0x02 +#else + #define EPNUM_MIDI 0x01 +#endif + +uint8_t const desc_fs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 64) +}; + +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 512) +}; +#endif + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX b/tinyusb/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX diff --git a/tinyusb/examples/device/msc_dual_lun/.skip.MCU_SAMD11 b/tinyusb/examples/device/msc_dual_lun/.skip.MCU_SAMD11 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/msc_dual_lun/.skip.MCU_SAMD11 diff --git a/tinyusb/examples/device/msc_dual_lun/CMakeLists.txt b/tinyusb/examples/device/msc_dual_lun/CMakeLists.txt new file mode 100755 index 00000000..9e834ae2 --- /dev/null +++ b/tinyusb/examples/device/msc_dual_lun/CMakeLists.txt @@ -0,0 +1,29 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/msc_dual_lun/Makefile b/tinyusb/examples/device/msc_dual_lun/Makefile new file mode 100755 index 00000000..5a455078 --- /dev/null +++ b/tinyusb/examples/device/msc_dual_lun/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/msc_dual_lun/src/main.c b/tinyusb/examples/device/msc_dual_lun/src/main.c new file mode 100755 index 00000000..0293261a --- /dev/null +++ b/tinyusb/examples/device/msc_dual_lun/src/main.c @@ -0,0 +1,113 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/msc_dual_lun/src/msc_disk_dual.c b/tinyusb/examples/device/msc_dual_lun/src/msc_disk_dual.c new file mode 100755 index 00000000..2ab050da --- /dev/null +++ b/tinyusb/examples/device/msc_dual_lun/src/msc_disk_dual.c @@ -0,0 +1,349 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board.h" +#include "tusb.h" + +#if CFG_TUD_MSC + +// Some MCU doesn't have enough 8KB SRAM to store the whole disk +// We will use Flash as read-only disk with board that has +// CFG_EXAMPLE_MSC_READONLY defined + +enum +{ + DISK_BLOCK_NUM = 16, // 8KB is the smallest size that windows allow to mount + DISK_BLOCK_SIZE = 512 +}; + + +//--------------------------------------------------------------------+ +// LUN 0 +//--------------------------------------------------------------------+ +#define README0_CONTENTS \ +"LUN0: This is tinyusb's MassStorage Class demo.\r\n\r\n\ +If you find any bugs or get any questions, feel free to file an\r\n\ +issue at github.com/hathach/tinyusb" + + +#ifdef CFG_EXAMPLE_MSC_READONLY +const +#endif +uint8_t msc_disk0[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +{ + //------------- Block0: Boot Sector -------------// + // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; + // sector_per_cluster = 1; reserved_sectors = 1; + // fat_num = 1; fat12_root_entry_num = 16; + // sector_per_fat = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0; + // drive_number = 0x80; media_type = 0xf8; extended_boot_signature = 0x29; + // filesystem_type = "FAT12 "; volume_serial_number = 0x1234; volume_label = "TinyUSB 0 "; + // FAT magic code at offset 510-511 + { + 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00, + 0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' , + 'S' , 'B' , ' ' , '0' , ' ' , ' ' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00, + + // Zero up to 2 last bytes of FAT magic code + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA + }, + + //------------- Block1: FAT12 Table -------------// + { + 0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file + }, + + //------------- Block2: Root Directory -------------// + { + // first entry is volume label + 'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , '0' , ' ' , ' ' , 0x08, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + // second entry is readme file + 'R' , 'E' , 'A' , 'D' , 'M' , 'E' , '0' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D, + 0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00, + sizeof(README0_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes) + }, + + //------------- Block3: Readme Content -------------// + README0_CONTENTS +}; + +//--------------------------------------------------------------------+ +// LUN 1 +//--------------------------------------------------------------------+ +#define README1_CONTENTS \ +"LUN1: This is tinyusb's MassStorage Class demo.\r\n\r\n\ +If you find any bugs or get any questions, feel free to file an\r\n\ +issue at github.com/hathach/tinyusb" + +#ifdef CFG_EXAMPLE_MSC_READONLY +const +#endif +uint8_t msc_disk1[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +{ + //------------- Block0: Boot Sector -------------// + // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; + // sector_per_cluster = 1; reserved_sectors = 1; + // fat_num = 1; fat12_root_entry_num = 16; + // sector_per_fat = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0; + // drive_number = 0x80; media_type = 0xf8; extended_boot_signature = 0x29; + // filesystem_type = "FAT12 "; volume_serial_number = 0x5678; volume_label = "TinyUSB 1 "; + // FAT magic code at offset 510-511 + { + 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00, + 0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x78, 0x56, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' , + 'S' , 'B' , ' ' , '1' , ' ' , ' ' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00, + + // Zero up to 2 last bytes of FAT magic code + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA + }, + + //------------- Block1: FAT12 Table -------------// + { + 0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file + }, + + //------------- Block2: Root Directory -------------// + { + // first entry is volume label + 'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , '1' , ' ' , ' ' , 0x08, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + // second entry is readme file + 'R' , 'E' , 'A' , 'D' , 'M' , 'E' , '1' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D, + 0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00, + sizeof(README1_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes) + }, + + //------------- Block3: Readme Content -------------// + README1_CONTENTS +}; + +// Invoked to determine max LUN +uint8_t tud_msc_get_maxlun_cb(void) +{ + return 2; // dual LUN +} + +// Invoked when received SCSI_CMD_INQUIRY +// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively +void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) +{ + (void) lun; // use same ID for both LUNs + + const char vid[] = "TinyUSB"; + const char pid[] = "Mass Storage"; + const char rev[] = "1.0"; + + memcpy(vendor_id , vid, strlen(vid)); + memcpy(product_id , pid, strlen(pid)); + memcpy(product_rev, rev, strlen(rev)); +} + +// Invoked when received Test Unit Ready command. +// return true allowing host to read/write this LUN e.g SD card inserted +bool tud_msc_test_unit_ready_cb(uint8_t lun) +{ + (void) lun; + + return true; // RAM disk is always ready +} + +// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size +// Application update block count and block size +void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) +{ + (void) lun; + + *block_count = DISK_BLOCK_NUM; + *block_size = DISK_BLOCK_SIZE; +} + +// Invoked when received Start Stop Unit command +// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage +// - Start = 1 : active mode, if load_eject = 1 : load disk storage +bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) +{ + (void) lun; + (void) power_condition; + + if ( load_eject ) + { + if (start) + { + // load disk storage + }else + { + // unload disk storage + } + } + + return true; +} + +// Callback invoked when received READ10 command. +// Copy disk's data to buffer (up to bufsize) and return number of copied bytes. +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) +{ + uint8_t const* addr = (lun ? msc_disk1[lba] : msc_disk0[lba]) + offset; + memcpy(buffer, addr, bufsize); + + return bufsize; +} + +// Callback invoked when received WRITE10 command. +// Process data in buffer to disk's storage and return number of written bytes +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) +{ +#ifndef CFG_EXAMPLE_MSC_READONLY + uint8_t* addr = (lun ? msc_disk1[lba] : msc_disk0[lba]) + offset; + memcpy(addr, buffer, bufsize); +#else + (void) lun; (void) lba; (void) offset; (void) buffer; +#endif + + return bufsize; +} + +// Callback invoked when received an SCSI command not in built-in list below +// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE +// - READ10 and WRITE10 has their own callbacks +int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) +{ + // read10 & write10 has their own callback and MUST not be handled here + + void const* response = NULL; + uint16_t resplen = 0; + + // most scsi handled is input + bool in_xfer = true; + + switch (scsi_cmd[0]) + { + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + // Host is about to read/write etc ... better not to disconnect disk + resplen = 0; + break; + + case SCSI_CMD_START_STOP_UNIT: + // Host try to eject/safe remove/poweroff us. We could safely disconnect with disk storage, or go into lower power + /* scsi_start_stop_unit_t const * start_stop = (scsi_start_stop_unit_t const *) scsi_cmd; + // Start bit = 0 : low power mode, if load_eject = 1 : unmount disk storage as well + // Start bit = 1 : Ready mode, if load_eject = 1 : mount disk storage + start_stop->start; + start_stop->load_eject; + */ + resplen = 0; + break; + + + default: + // Set Sense = Invalid Command Operation + tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + + // negative means error -> tinyusb could stall and/or response with failed status + resplen = -1; + break; + } + + // return resplen must not larger than bufsize + if ( resplen > bufsize ) resplen = bufsize; + + if ( response && (resplen > 0) ) + { + if(in_xfer) + { + memcpy(buffer, response, resplen); + }else + { + // SCSI output + } + } + + return resplen; +} + +#endif diff --git a/tinyusb/examples/device/msc_dual_lun/src/tusb_config.h b/tinyusb/examples/device/msc_dual_lun/src/tusb_config.h new file mode 100755 index 00000000..44da21e5 --- /dev/null +++ b/tinyusb/examples/device/msc_dual_lun/src/tusb_config.h @@ -0,0 +1,111 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 1 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// MSC Buffer size of Device Mass storage +#define CFG_TUD_MSC_EP_BUFSIZE 512 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/msc_dual_lun/src/usb_descriptors.c b/tinyusb/examples/device/msc_dual_lun/src/usb_descriptors.c new file mode 100755 index 00000000..138de62a --- /dev/null +++ b/tinyusb/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -0,0 +1,185 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_MSC, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_MSC_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... + #define EPNUM_MSC_OUT 0x02 + #define EPNUM_MSC_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG + // SAMG doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_MSC_OUT 0x01 + #define EPNUM_MSC_IN 0x82 + +#else + #define EPNUM_MSC_OUT 0x01 + #define EPNUM_MSC_IN 0x81 + +#endif + +uint8_t const desc_fs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64), +}; + +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), +}; +#endif + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx new file mode 100755 index 00000000..17600f06 --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx @@ -0,0 +1 @@ +too many warnings for 16-bit integer overflow diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_NUC121 b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_NUC121 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_NUC121 diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_SAMD11 b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_SAMD11 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_SAMD11 diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_STM32L0 b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_STM32L0 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_STM32L0 diff --git a/tinyusb/examples/device/net_lwip_webserver/CMakeLists.txt b/tinyusb/examples/device/net_lwip_webserver/CMakeLists.txt new file mode 100755 index 00000000..7500f6e9 --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/CMakeLists.txt @@ -0,0 +1,81 @@ +cmake_minimum_required(VERSION 3.5) + +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +if (EXISTS ${TOP}/lib/lwip/src) + include(${TOP}/hw/bsp/family_support.cmake) + + # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) + family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + + project(${PROJECT}) + + # Checks this example is valid for the family and initializes the project + family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + + add_executable(${PROJECT}) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ${TOP}/lib/lwip/src/include + ${TOP}/lib/lwip/src/include/ipv4 + ${TOP}/lib/lwip/src/include/lwip/apps + ${TOP}/lib/networking + ) + + target_sources(${PROJECT} PUBLIC + ${TOP}/lib/lwip/src/core/altcp.c + ${TOP}/lib/lwip/src/core/altcp_alloc.c + ${TOP}/lib/lwip/src/core/altcp_tcp.c + ${TOP}/lib/lwip/src/core/def.c + ${TOP}/lib/lwip/src/core/dns.c + ${TOP}/lib/lwip/src/core/inet_chksum.c + ${TOP}/lib/lwip/src/core/init.c + ${TOP}/lib/lwip/src/core/ip.c + ${TOP}/lib/lwip/src/core/mem.c + ${TOP}/lib/lwip/src/core/memp.c + ${TOP}/lib/lwip/src/core/netif.c + ${TOP}/lib/lwip/src/core/pbuf.c + ${TOP}/lib/lwip/src/core/raw.c + ${TOP}/lib/lwip/src/core/stats.c + ${TOP}/lib/lwip/src/core/sys.c + ${TOP}/lib/lwip/src/core/tcp.c + ${TOP}/lib/lwip/src/core/tcp_in.c + ${TOP}/lib/lwip/src/core/tcp_out.c + ${TOP}/lib/lwip/src/core/timeouts.c + ${TOP}/lib/lwip/src/core/udp.c + ${TOP}/lib/lwip/src/core/ipv4/autoip.c + ${TOP}/lib/lwip/src/core/ipv4/dhcp.c + ${TOP}/lib/lwip/src/core/ipv4/etharp.c + ${TOP}/lib/lwip/src/core/ipv4/icmp.c + ${TOP}/lib/lwip/src/core/ipv4/igmp.c + ${TOP}/lib/lwip/src/core/ipv4/ip4.c + ${TOP}/lib/lwip/src/core/ipv4/ip4_addr.c + ${TOP}/lib/lwip/src/core/ipv4/ip4_frag.c + ${TOP}/lib/lwip/src/netif/ethernet.c + ${TOP}/lib/lwip/src/netif/slipif.c + ${TOP}/lib/lwip/src/apps/http/httpd.c + ${TOP}/lib/lwip/src/apps/http/fs.c + ${TOP}/lib/networking/dhserver.c + ${TOP}/lib/networking/dnserver.c + ${TOP}/lib/networking/rndis_reports.c + ) + + target_compile_definitions(${PROJECT} PUBLIC + PBUF_POOL_SIZE=2 + TCP_WND=2*TCP_MSS + HTTPD_USE_CUSTOM_FSDATA=0 + ) + + # Configure compilation flags and libraries for the example... see the corresponding function + # in hw/bsp/FAMILY/family.cmake for details. + family_configure_device_example(${PROJECT}) +endif()
\ No newline at end of file diff --git a/tinyusb/examples/device/net_lwip_webserver/Makefile b/tinyusb/examples/device/net_lwip_webserver/Makefile new file mode 100755 index 00000000..c3e0d889 --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/Makefile @@ -0,0 +1,61 @@ +DEPS_SUBMODULES += lib/lwip + +include ../../../tools/top.mk +include ../../make.mk + +CFLAGS += \ + -DPBUF_POOL_SIZE=2 \ + -DTCP_WND=2*TCP_MSS \ + -DHTTPD_USE_CUSTOM_FSDATA=0 + +INC += \ + src \ + $(TOP)/hw \ + $(TOP)/lib/lwip/src/include \ + $(TOP)/lib/lwip/src/include/ipv4 \ + $(TOP)/lib/lwip/src/include/lwip/apps \ + $(TOP)/lib/networking + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +# lwip sources +SRC_C += \ + lib/lwip/src/core/altcp.c \ + lib/lwip/src/core/altcp_alloc.c \ + lib/lwip/src/core/altcp_tcp.c \ + lib/lwip/src/core/def.c \ + lib/lwip/src/core/dns.c \ + lib/lwip/src/core/inet_chksum.c \ + lib/lwip/src/core/init.c \ + lib/lwip/src/core/ip.c \ + lib/lwip/src/core/mem.c \ + lib/lwip/src/core/memp.c \ + lib/lwip/src/core/netif.c \ + lib/lwip/src/core/pbuf.c \ + lib/lwip/src/core/raw.c \ + lib/lwip/src/core/stats.c \ + lib/lwip/src/core/sys.c \ + lib/lwip/src/core/tcp.c \ + lib/lwip/src/core/tcp_in.c \ + lib/lwip/src/core/tcp_out.c \ + lib/lwip/src/core/timeouts.c \ + lib/lwip/src/core/udp.c \ + lib/lwip/src/core/ipv4/autoip.c \ + lib/lwip/src/core/ipv4/dhcp.c \ + lib/lwip/src/core/ipv4/etharp.c \ + lib/lwip/src/core/ipv4/icmp.c \ + lib/lwip/src/core/ipv4/igmp.c \ + lib/lwip/src/core/ipv4/ip4.c \ + lib/lwip/src/core/ipv4/ip4_addr.c \ + lib/lwip/src/core/ipv4/ip4_frag.c \ + lib/lwip/src/netif/ethernet.c \ + lib/lwip/src/netif/slipif.c \ + lib/lwip/src/apps/http/httpd.c \ + lib/lwip/src/apps/http/fs.c \ + lib/networking/dhserver.c \ + lib/networking/dnserver.c \ + lib/networking/rndis_reports.c + +include ../../rules.mk diff --git a/tinyusb/examples/device/net_lwip_webserver/src/arch/cc.h b/tinyusb/examples/device/net_lwip_webserver/src/arch/cc.h new file mode 100755 index 00000000..56a0cacf --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/src/arch/cc.h @@ -0,0 +1,75 @@ +/* + * Copyright (c) 2001-2003 Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + * + * This file is part of the lwIP TCP/IP stack. + * + * Author: Adam Dunkels <adam@sics.se> + * + */ +#ifndef __CC_H__ +#define __CC_H__ + +//#include "cpu.h" + +typedef int sys_prot_t; + + + +/* define compiler specific symbols */ +#if defined (__ICCARM__) + +#define PACK_STRUCT_BEGIN +#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_END +#define PACK_STRUCT_FIELD(x) x +#define PACK_STRUCT_USE_INCLUDES + +#elif defined (__CC_ARM) + +#define PACK_STRUCT_BEGIN __packed +#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_END +#define PACK_STRUCT_FIELD(x) x + +#elif defined (__GNUC__) + +#define PACK_STRUCT_BEGIN +#define PACK_STRUCT_STRUCT __attribute__ ((__packed__)) +#define PACK_STRUCT_END +#define PACK_STRUCT_FIELD(x) x + +#elif defined (__TASKING__) + +#define PACK_STRUCT_BEGIN +#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_END +#define PACK_STRUCT_FIELD(x) x + +#endif + +#define LWIP_PLATFORM_ASSERT(x) do { if(!(x)) while(1); } while(0) + +#endif /* __CC_H__ */ diff --git a/tinyusb/examples/device/net_lwip_webserver/src/lwipopts.h b/tinyusb/examples/device/net_lwip_webserver/src/lwipopts.h new file mode 100755 index 00000000..5a8096f5 --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/src/lwipopts.h @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2001-2003 Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + * + * This file is part of the lwIP TCP/IP stack. + * + * Author: Simon Goldschmidt + * + */ +#ifndef __LWIPOPTS_H__ +#define __LWIPOPTS_H__ + +/* Prevent having to link sys_arch.c (we don't test the API layers in unit tests) */ +#define NO_SYS 1 +#define MEM_ALIGNMENT 4 +#define LWIP_RAW 0 +#define LWIP_NETCONN 0 +#define LWIP_SOCKET 0 +#define LWIP_DHCP 0 +#define LWIP_ICMP 1 +#define LWIP_UDP 1 +#define LWIP_TCP 1 +#define ETH_PAD_SIZE 0 +#define LWIP_IP_ACCEPT_UDP_PORT(p) ((p) == PP_NTOHS(67)) + +#define TCP_MSS (1500 /*mtu*/ - 20 /*iphdr*/ - 20 /*tcphhr*/) +#define TCP_SND_BUF (2 * TCP_MSS) + +#define ETHARP_SUPPORT_STATIC_ENTRIES 1 + +#define LWIP_HTTPD_CGI 0 +#define LWIP_HTTPD_SSI 0 +#define LWIP_HTTPD_SSI_INCLUDE_TAG 0 + +#define LWIP_SINGLE_NETIF 1 + +#endif /* __LWIPOPTS_H__ */ diff --git a/tinyusb/examples/device/net_lwip_webserver/src/main.c b/tinyusb/examples/device/net_lwip_webserver/src/main.c new file mode 100755 index 00000000..80831921 --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/src/main.c @@ -0,0 +1,247 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Peter Lawrence + * + * influenced by lrndis https://github.com/fetisov/lrndis + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* +this appears as either a RNDIS or CDC-ECM USB virtual network adapter; the OS picks its preference + +RNDIS should be valid on Linux and Windows hosts, and CDC-ECM should be valid on Linux and macOS hosts + +The MCU appears to the host as IP address 192.168.7.1, and provides a DHCP server, DNS server, and web server. +*/ +/* +Some smartphones *may* work with this implementation as well, but likely have limited (broken) drivers, +and likely their manufacturer has not tested such functionality. Some code workarounds could be tried: + +The smartphone may only have an ECM driver, but refuse to automatically pick ECM (unlike the OSes above); +try modifying ./examples/devices/net_lwip_webserver/usb_descriptors.c so that CONFIG_ID_ECM is default. + +The smartphone may be artificially picky about which Ethernet MAC address to recognize; if this happens, +try changing the first byte of tud_network_mac_address[] below from 0x02 to 0x00 (clearing bit 1). +*/ + +#include "bsp/board.h" +#include "tusb.h" + +#include "dhserver.h" +#include "dnserver.h" +#include "lwip/init.h" +#include "lwip/timeouts.h" +#include "httpd.h" + +/* lwip context */ +static struct netif netif_data; + +/* shared between tud_network_recv_cb() and service_traffic() */ +static struct pbuf *received_frame; + +/* this is used by this code, ./class/net/net_driver.c, and usb_descriptors.c */ +/* ideally speaking, this should be generated from the hardware's unique ID (if available) */ +/* it is suggested that the first byte is 0x02 to indicate a link-local address */ +const uint8_t tud_network_mac_address[6] = {0x02,0x02,0x84,0x6A,0x96,0x00}; + +/* network parameters of this MCU */ +static const ip_addr_t ipaddr = IPADDR4_INIT_BYTES(192, 168, 7, 1); +static const ip_addr_t netmask = IPADDR4_INIT_BYTES(255, 255, 255, 0); +static const ip_addr_t gateway = IPADDR4_INIT_BYTES(0, 0, 0, 0); + +/* database IP addresses that can be offered to the host; this must be in RAM to store assigned MAC addresses */ +static dhcp_entry_t entries[] = +{ + /* mac ip address lease time */ + { {0}, IPADDR4_INIT_BYTES(192, 168, 7, 2), 24 * 60 * 60 }, + { {0}, IPADDR4_INIT_BYTES(192, 168, 7, 3), 24 * 60 * 60 }, + { {0}, IPADDR4_INIT_BYTES(192, 168, 7, 4), 24 * 60 * 60 }, +}; + +static const dhcp_config_t dhcp_config = +{ + .router = IPADDR4_INIT_BYTES(0, 0, 0, 0), /* router address (if any) */ + .port = 67, /* listen port */ + .dns = IPADDR4_INIT_BYTES(192, 168, 7, 1), /* dns server (if any) */ + "usb", /* dns suffix */ + TU_ARRAY_SIZE(entries), /* num entry */ + entries /* entries */ +}; +static err_t linkoutput_fn(struct netif *netif, struct pbuf *p) +{ + (void)netif; + + for (;;) + { + /* if TinyUSB isn't ready, we must signal back to lwip that there is nothing we can do */ + if (!tud_ready()) + return ERR_USE; + + /* if the network driver can accept another packet, we make it happen */ + if (tud_network_can_xmit()) + { + tud_network_xmit(p, 0 /* unused for this example */); + return ERR_OK; + } + + /* transfer execution to TinyUSB in the hopes that it will finish transmitting the prior packet */ + tud_task(); + } +} + +static err_t output_fn(struct netif *netif, struct pbuf *p, const ip_addr_t *addr) +{ + return etharp_output(netif, p, addr); +} + +static err_t netif_init_cb(struct netif *netif) +{ + LWIP_ASSERT("netif != NULL", (netif != NULL)); + netif->mtu = CFG_TUD_NET_MTU; + netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP | NETIF_FLAG_UP; + netif->state = NULL; + netif->name[0] = 'E'; + netif->name[1] = 'X'; + netif->linkoutput = linkoutput_fn; + netif->output = output_fn; + return ERR_OK; +} + +static void init_lwip(void) +{ + struct netif *netif = &netif_data; + + lwip_init(); + + /* the lwip virtual MAC address must be different from the host's; to ensure this, we toggle the LSbit */ + netif->hwaddr_len = sizeof(tud_network_mac_address); + memcpy(netif->hwaddr, tud_network_mac_address, sizeof(tud_network_mac_address)); + netif->hwaddr[5] ^= 0x01; + + netif = netif_add(netif, &ipaddr, &netmask, &gateway, NULL, netif_init_cb, ip_input); + netif_set_default(netif); +} + +/* handle any DNS requests from dns-server */ +bool dns_query_proc(const char *name, ip_addr_t *addr) +{ + if (0 == strcmp(name, "tiny.usb")) + { + *addr = ipaddr; + return true; + } + return false; +} + +bool tud_network_recv_cb(const uint8_t *src, uint16_t size) +{ + /* this shouldn't happen, but if we get another packet before + parsing the previous, we must signal our inability to accept it */ + if (received_frame) return false; + + if (size) + { + struct pbuf *p = pbuf_alloc(PBUF_RAW, size, PBUF_POOL); + + if (p) + { + /* pbuf_alloc() has already initialized struct; all we need to do is copy the data */ + memcpy(p->payload, src, size); + + /* store away the pointer for service_traffic() to later handle */ + received_frame = p; + } + } + + return true; +} + +uint16_t tud_network_xmit_cb(uint8_t *dst, void *ref, uint16_t arg) +{ + struct pbuf *p = (struct pbuf *)ref; + + (void)arg; /* unused for this example */ + + return pbuf_copy_partial(p, dst, p->tot_len, 0); +} + +static void service_traffic(void) +{ + /* handle any packet received by tud_network_recv_cb() */ + if (received_frame) + { + ethernet_input(received_frame, &netif_data); + pbuf_free(received_frame); + received_frame = NULL; + tud_network_recv_renew(); + } + + sys_check_timeouts(); +} + +void tud_network_init_cb(void) +{ + /* if the network is re-initializing and we have a leftover packet, we must do a cleanup */ + if (received_frame) + { + pbuf_free(received_frame); + received_frame = NULL; + } +} + +int main(void) +{ + /* initialize TinyUSB */ + board_init(); + tusb_init(); + + /* initialize lwip, dhcp-server, dns-server, and http */ + init_lwip(); + while (!netif_is_up(&netif_data)); + while (dhserv_init(&dhcp_config) != ERR_OK); + while (dnserv_init(&ipaddr, 53, dns_query_proc) != ERR_OK); + httpd_init(); + + while (1) + { + tud_task(); + service_traffic(); + } + + return 0; +} + +/* lwip has provision for using a mutex, when applicable */ +sys_prot_t sys_arch_protect(void) +{ + return 0; +} +void sys_arch_unprotect(sys_prot_t pval) +{ + (void)pval; +} + +/* lwip needs a millisecond time source, and the TinyUSB board support code has one available */ +uint32_t sys_now(void) +{ + return board_millis(); +} diff --git a/tinyusb/examples/device/net_lwip_webserver/src/tusb_config.h b/tinyusb/examples/device/net_lwip_webserver/src/tusb_config.h new file mode 100755 index 00000000..262d4ebc --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/src/tusb_config.h @@ -0,0 +1,109 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 +#define CFG_TUD_NET 1 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/net_lwip_webserver/src/usb_descriptors.c b/tinyusb/examples/device/net_lwip_webserver/src/usb_descriptors.c new file mode 100755 index 00000000..71e6c458 --- /dev/null +++ b/tinyusb/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -0,0 +1,224 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] NET | VENDOR | MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) | _PID_MAP(NET, 5) ) + +// String Descriptor Index +enum +{ + STRID_LANGID = 0, + STRID_MANUFACTURER, + STRID_PRODUCT, + STRID_SERIAL, + STRID_INTERFACE, + STRID_MAC +}; + +enum +{ + ITF_NUM_CDC = 0, + ITF_NUM_CDC_DATA, + ITF_NUM_TOTAL +}; + +enum +{ + CONFIG_ID_RNDIS = 0, + CONFIG_ID_ECM = 1, + CONFIG_ID_COUNT +}; + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) device class + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0101, + + .iManufacturer = STRID_MANUFACTURER, + .iProduct = STRID_PRODUCT, + .iSerialNumber = STRID_SERIAL, + + .bNumConfigurations = CONFIG_ID_COUNT // multiple configurations +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ +#define MAIN_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN) +#define ALT_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_NET_NOTIF 0x81 + #define EPNUM_NET_OUT 0x02 + #define EPNUM_NET_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_NET_NOTIF 0x81 + #define EPNUM_NET_OUT 0x02 + #define EPNUM_NET_IN 0x83 + +#else + #define EPNUM_NET_NOTIF 0x81 + #define EPNUM_NET_OUT 0x02 + #define EPNUM_NET_IN 0x82 +#endif + +static uint8_t const rndis_configuration[] = +{ + // Config number (index+1), interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS+1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_RNDIS_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE), +}; + +static uint8_t const ecm_configuration[] = +{ + // Config number (index+1), interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM+1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100), + + // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. + TUD_CDC_ECM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), +}; + +// Configuration array: RNDIS and CDC-ECM +// - Windows only works with RNDIS +// - MacOS only works with CDC-ECM +// - Linux will work on both +static uint8_t const * const configuration_arr[2] = +{ + [CONFIG_ID_RNDIS] = rndis_configuration, + [CONFIG_ID_ECM ] = ecm_configuration +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + return (index < CONFIG_ID_COUNT) ? configuration_arr[index] : NULL; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +static char const* string_desc_arr [] = +{ + [STRID_LANGID] = (const char[]) { 0x09, 0x04 }, // supported language is English (0x0409) + [STRID_MANUFACTURER] = "TinyUSB", // Manufacturer + [STRID_PRODUCT] = "TinyUSB Device", // Product + [STRID_SERIAL] = "123456", // Serial + [STRID_INTERFACE] = "TinyUSB Network Interface" // Interface Description + + // STRID_MAC index is handled separately +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + unsigned int chr_count = 0; + + if (STRID_LANGID == index) + { + memcpy(&_desc_str[1], string_desc_arr[STRID_LANGID], 2); + chr_count = 1; + } + else if (STRID_MAC == index) + { + // Convert MAC address into UTF-16 + + for (unsigned i=0; i<sizeof(tud_network_mac_address); i++) + { + _desc_str[1+chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 4) & 0xf]; + _desc_str[1+chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf]; + } + } + else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > (TU_ARRAY_SIZE(_desc_str) - 1)) chr_count = TU_ARRAY_SIZE(_desc_str) - 1; + + // Convert ASCII string into UTF-16 + for (unsigned int i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC11UXX b/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC11UXX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC11UXX diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC13XX b/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC13XX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC13XX diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_NUC121 b/tinyusb/examples/device/uac2_headset/.skip.MCU_NUC121 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/.skip.MCU_NUC121 diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMD11 b/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMD11 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMD11 diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_SAME5X b/tinyusb/examples/device/uac2_headset/.skip.MCU_SAME5X new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/.skip.MCU_SAME5X diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMG b/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMG new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMG diff --git a/tinyusb/examples/device/uac2_headset/CMakeLists.txt b/tinyusb/examples/device/uac2_headset/CMakeLists.txt new file mode 100755 index 00000000..abc4d91d --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/uac2_headset/Makefile b/tinyusb/examples/device/uac2_headset/Makefile new file mode 100755 index 00000000..5a455078 --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/uac2_headset/src/main.c b/tinyusb/examples/device/uac2_headset/src/main.c new file mode 100755 index 00000000..790af088 --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/src/main.c @@ -0,0 +1,441 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Jerzy Kasenberg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTOTYPES +//--------------------------------------------------------------------+ + +// List of supported sample rates +#if defined(__RX__) +const uint32_t sample_rates[] = {44100, 48000}; +#else +const uint32_t sample_rates[] = {44100, 48000, 88200, 96000}; +#endif +uint32_t current_sample_rate = 44100; + +#define N_SAMPLE_RATES TU_ARRAY_SIZE(sample_rates) + +/* Blink pattern + * - 25 ms : streaming data + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum +{ + BLINK_STREAMING = 25, + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +enum +{ + VOLUME_CTRL_0_DB = 0, + VOLUME_CTRL_10_DB = 2560, + VOLUME_CTRL_20_DB = 5120, + VOLUME_CTRL_30_DB = 7680, + VOLUME_CTRL_40_DB = 10240, + VOLUME_CTRL_50_DB = 12800, + VOLUME_CTRL_60_DB = 15360, + VOLUME_CTRL_70_DB = 17920, + VOLUME_CTRL_80_DB = 20480, + VOLUME_CTRL_90_DB = 23040, + VOLUME_CTRL_100_DB = 25600, + VOLUME_CTRL_SILENCE = 0x8000, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +// Audio controls +// Current states +int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 +int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 + +// Buffer for microphone data +int32_t mic_buf[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ / 4]; +// Buffer for speaker data +int32_t spk_buf[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ / 4]; +// Speaker data size received in the last frame +int spk_data_size; +// Resolution per format +const uint8_t resolutions_per_format[CFG_TUD_AUDIO_FUNC_1_N_FORMATS] = {CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX, + CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX}; +// Current resolution, update on format change +uint8_t current_resolution; + +void led_blinking_task(void); +void audio_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + TU_LOG1("Headset running\r\n"); + + while (1) + { + tud_task(); // TinyUSB device task + audio_task(); + led_blinking_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void)remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Helper for clock get requests +static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t const *request) +{ + TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); + + if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) + { + if (request->bRequest == AUDIO_CS_REQ_CUR) + { + TU_LOG1("Clock get current freq %u\r\n", current_sample_rate); + + audio_control_cur_4_t curf = { tu_htole32(current_sample_rate) }; + return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); + } + else if (request->bRequest == AUDIO_CS_REQ_RANGE) + { + audio_control_range_4_n_t(N_SAMPLE_RATES) rangef = + { + .wNumSubRanges = tu_htole16(N_SAMPLE_RATES) + }; + TU_LOG1("Clock get %d freq ranges\r\n", N_SAMPLE_RATES); + for(uint8_t i = 0; i < N_SAMPLE_RATES; i++) + { + rangef.subrange[i].bMin = sample_rates[i]; + rangef.subrange[i].bMax = sample_rates[i]; + rangef.subrange[i].bRes = 0; + TU_LOG1("Range %d (%d, %d, %d)\r\n", i, (int)rangef.subrange[i].bMin, (int)rangef.subrange[i].bMax, (int)rangef.subrange[i].bRes); + } + + return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &rangef, sizeof(rangef)); + } + } + else if (request->bControlSelector == AUDIO_CS_CTRL_CLK_VALID && + request->bRequest == AUDIO_CS_REQ_CUR) + { + audio_control_cur_1_t cur_valid = { .bCur = 1 }; + TU_LOG1("Clock get is valid %u\r\n", cur_valid.bCur); + return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &cur_valid, sizeof(cur_valid)); + } + TU_LOG1("Clock get request not supported, entity = %u, selector = %u, request = %u\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + return false; +} + +// Helper for clock set requests +static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) +{ + (void)rhport; + + TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); + TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + + if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) + { + TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t)); + + current_sample_rate = ((audio_control_cur_4_t *)buf)->bCur; + + TU_LOG1("Clock set current freq: %d\r\n", current_sample_rate); + + return true; + } + else + { + TU_LOG1("Clock set request not supported, entity = %u, selector = %u, request = %u\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + return false; + } +} + +// Helper for feature unit get requests +static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_request_t const *request) +{ + TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); + + if (request->bControlSelector == AUDIO_FU_CTRL_MUTE && request->bRequest == AUDIO_CS_REQ_CUR) + { + audio_control_cur_1_t mute1 = { .bCur = mute[request->bChannelNumber] }; + TU_LOG1("Get channel %u mute %d\r\n", request->bChannelNumber, mute1.bCur); + return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &mute1, sizeof(mute1)); + } + else if (UAC2_ENTITY_SPK_FEATURE_UNIT && request->bControlSelector == AUDIO_FU_CTRL_VOLUME) + { + if (request->bRequest == AUDIO_CS_REQ_RANGE) + { + audio_control_range_2_n_t(1) range_vol = { + .wNumSubRanges = tu_htole16(1), + .subrange[0] = { .bMin = tu_htole16(-VOLUME_CTRL_50_DB), tu_htole16(VOLUME_CTRL_0_DB), tu_htole16(256) } + }; + TU_LOG1("Get channel %u volume range (%d, %d, %u) dB\r\n", request->bChannelNumber, + range_vol.subrange[0].bMin / 256, range_vol.subrange[0].bMax / 256, range_vol.subrange[0].bRes / 256); + return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &range_vol, sizeof(range_vol)); + } + else if (request->bRequest == AUDIO_CS_REQ_CUR) + { + audio_control_cur_2_t cur_vol = { .bCur = tu_htole16(volume[request->bChannelNumber]) }; + TU_LOG1("Get channel %u volume %d dB\r\n", request->bChannelNumber, cur_vol.bCur / 256); + return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &cur_vol, sizeof(cur_vol)); + } + } + TU_LOG1("Feature unit get request not supported, entity = %u, selector = %u, request = %u\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + + return false; +} + +// Helper for feature unit set requests +static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) +{ + (void)rhport; + + TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); + TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + + if (request->bControlSelector == AUDIO_FU_CTRL_MUTE) + { + TU_VERIFY(request->wLength == sizeof(audio_control_cur_1_t)); + + mute[request->bChannelNumber] = ((audio_control_cur_1_t *)buf)->bCur; + + TU_LOG1("Set channel %d Mute: %d\r\n", request->bChannelNumber, mute[request->bChannelNumber]); + + return true; + } + else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) + { + TU_VERIFY(request->wLength == sizeof(audio_control_cur_2_t)); + + volume[request->bChannelNumber] = ((audio_control_cur_2_t const *)buf)->bCur; + + TU_LOG1("Set channel %d volume: %d dB\r\n", request->bChannelNumber, volume[request->bChannelNumber] / 256); + + return true; + } + else + { + TU_LOG1("Feature unit set request not supported, entity = %u, selector = %u, request = %u\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + return false; + } +} + +//--------------------------------------------------------------------+ +// Application Callback API Implementations +//--------------------------------------------------------------------+ + +// Invoked when audio class specific get request received for an entity +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) +{ + audio_control_request_t *request = (audio_control_request_t *)p_request; + + if (request->bEntityID == UAC2_ENTITY_CLOCK) + return tud_audio_clock_get_request(rhport, request); + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + return tud_audio_feature_unit_get_request(rhport, request); + else + { + TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + } + return false; +} + +// Invoked when audio class specific set request received for an entity +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) +{ + audio_control_request_t const *request = (audio_control_request_t const *)p_request; + + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + return tud_audio_feature_unit_set_request(rhport, request, buf); + if (request->bEntityID == UAC2_ENTITY_CLOCK) + return tud_audio_clock_set_request(rhport, request, buf); + TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + + return false; +} + +bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void)rhport; + + uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); + uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); + + if (ITF_NUM_AUDIO_STREAMING_SPK == itf && alt == 0) + blink_interval_ms = BLINK_MOUNTED; + + return true; +} + +bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void)rhport; + uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); + uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); + + TU_LOG2("Set interface %d alt %d\r\n", itf, alt); + if (ITF_NUM_AUDIO_STREAMING_SPK == itf && alt != 0) + blink_interval_ms = BLINK_STREAMING; + + // Clear buffer when streaming format is changed + spk_data_size = 0; + if(alt != 0) + { + current_resolution = resolutions_per_format[alt-1]; + } + + return true; +} + +bool tud_audio_rx_done_pre_read_cb(uint8_t rhport, uint16_t n_bytes_received, uint8_t func_id, uint8_t ep_out, uint8_t cur_alt_setting) +{ + (void)rhport; + (void)func_id; + (void)ep_out; + (void)cur_alt_setting; + + spk_data_size = tud_audio_read(spk_buf, n_bytes_received); + return true; +} + +bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting) +{ + (void)rhport; + (void)itf; + (void)ep_in; + (void)cur_alt_setting; + + // This callback could be used to fill microphone data separately + return true; +} + +//--------------------------------------------------------------------+ +// AUDIO Task +//--------------------------------------------------------------------+ + +void audio_task(void) +{ + // When new data arrived, copy data from speaker buffer, to microphone buffer + // and send it over + // Only support speaker & headphone both have the same resolution + // If one is 16bit another is 24bit be care of LOUD noise ! + if (spk_data_size) + { + if (current_resolution == 16) + { + int16_t *src = (int16_t*)spk_buf; + int16_t *limit = (int16_t*)spk_buf + spk_data_size / 2; + int16_t *dst = (int16_t*)mic_buf; + while (src < limit) + { + // Combine two channels into one + int32_t left = *src++; + int32_t right = *src++; + *dst++ = (left >> 1) + (right >> 1); + } + tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2); + spk_data_size = 0; + } + else if (current_resolution == 24) + { + int32_t *src = spk_buf; + int32_t *limit = spk_buf + spk_data_size / 4; + int32_t *dst = mic_buf; + while (src < limit) + { + // Combine two channels into one + int32_t left = *src++; + int32_t right = *src++; + *dst++ = ((left >> 1) + (right >> 1)) & 0xffffff00; + } + tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2); + spk_data_size = 0; + } + } +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if (board_millis() - start_ms < blink_interval_ms) return; + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; +} diff --git a/tinyusb/examples/device/uac2_headset/src/tusb_config.h b/tinyusb/examples/device/uac2_headset/src/tusb_config.h new file mode 100755 index 00000000..e8d93f56 --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/src/tusb_config.h @@ -0,0 +1,159 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Ha Thach (tinyusb.org) + * Copyright (c) 2020 Jerzy Kasenberg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +#include "usb_descriptors.h" + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +#else +#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +// Can be set during compilation i.e.: make LOG=<value for CFG_TUSB_DEBUG> BOARD=<bsp> +// Keep in mind that enabling logs when data is streaming can disrupt data flow. +// It can be very helpful though when audio unit requests are tested/debugged. +#define CFG_TUSB_DEBUG 0 +#endif + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_AUDIO 1 +#define CFG_TUD_VENDOR 0 + +//-------------------------------------------------------------------- +// AUDIO CLASS DRIVER CONFIGURATION +//-------------------------------------------------------------------- + +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_HEADSET_STEREO_DESC_LEN + +// How many formats are used, need to adjust USB descriptor if changed +#define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 + +// Audio format type I specifications +#if defined(__RX__) +#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 48000 // 16bit/48kHz is the best quality for Renesas RX +#else +#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 96000 // 24bit/96kHz is the best quality for full-speed, high-speed is needed beyond this +#endif +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX 2 + +// 16bit in 16bit slots +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX 2 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX 16 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX 2 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 + +#if defined(__RX__) +// 8bit in 8bit slots +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 1 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX 8 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX 1 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 8 +#else +// 24bit in 32bit slots +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 4 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX 24 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX 4 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 24 +#endif + +// EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) +#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 + +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN)*2 +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used + +// EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) +#define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 + +#define CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) + +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT)*2 +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used + +// Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes) +#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 2 + +// Size of control request buffer +#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 + +#ifdef __cplusplus +} +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/uac2_headset/src/usb_descriptors.c b/tinyusb/examples/device/uac2_headset/src/usb_descriptors.c new file mode 100755 index 00000000..4a26b0b1 --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/src/usb_descriptors.c @@ -0,0 +1,168 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Ha Thach (tinyusb.org) + * Copyright (c) 2020 Jerzy Kasenberg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "usb_descriptors.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *)&desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_HEADSET_STEREO_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX +// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number +// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... +#define EPNUM_AUDIO_IN 0x03 +#define EPNUM_AUDIO_OUT 0x03 +#elif CFG_TUSB_MCU == OPT_MCU_NRF5X +// ISO endpoints for NRF5x are fixed to 0x08 (0x88) +#define EPNUM_AUDIO_IN 0x08 +#define EPNUM_AUDIO_OUT 0x08 +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X +// SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT +// e.g EP1 OUT & EP1 IN cannot exist together +#define EPNUM_AUDIO_IN 0x01 +#define EPNUM_AUDIO_OUT 0x02 +#else +#define EPNUM_AUDIO_IN 0x01 +#define EPNUM_AUDIO_OUT 0x01 +#endif + +uint8_t const desc_configuration[] = +{ + // Interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80) +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void)index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB headset", // 2: Product + "000001", // 3: Serials, should use chip ID + "TinyUSB Speakers", // 4: Audio Interface + "TinyUSB Microphone", // 5: Audio Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void)langid; + + uint8_t chr_count; + + if (index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + } + else + { + // Convert ASCII string into UTF-16 + + if (!(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0]))) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if (chr_count > 31) chr_count = 31; + + for (uint8_t i = 0; i < chr_count; i++) + { + _desc_str[1 + i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2 * chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/uac2_headset/src/usb_descriptors.h b/tinyusb/examples/device/uac2_headset/src/usb_descriptors.h new file mode 100755 index 00000000..d9510ea4 --- /dev/null +++ b/tinyusb/examples/device/uac2_headset/src/usb_descriptors.h @@ -0,0 +1,155 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Jerzy Kasenbreg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _USB_DESCRIPTORS_H_ +#define _USB_DESCRIPTORS_H_ + +// #include "tusb.h" + +// Unit numbers are arbitrary selected +#define UAC2_ENTITY_CLOCK 0x04 +// Speaker path +#define UAC2_ENTITY_SPK_INPUT_TERMINAL 0x01 +#define UAC2_ENTITY_SPK_FEATURE_UNIT 0x02 +#define UAC2_ENTITY_SPK_OUTPUT_TERMINAL 0x03 +// Microphone path +#define UAC2_ENTITY_MIC_INPUT_TERMINAL 0x11 +#define UAC2_ENTITY_MIC_OUTPUT_TERMINAL 0x13 + +enum +{ + ITF_NUM_AUDIO_CONTROL = 0, + ITF_NUM_AUDIO_STREAMING_SPK, + ITF_NUM_AUDIO_STREAMING_MIC, + ITF_NUM_TOTAL +}; + +#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ + + TUD_AUDIO_DESC_STD_AC_LEN\ + + TUD_AUDIO_DESC_CS_AC_LEN\ + + TUD_AUDIO_DESC_CLK_SRC_LEN\ + + TUD_AUDIO_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN\ + + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ + /* Interface 1, Alternate 0 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + /* Interface 1, Alternate 0 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + /* Interface 1, Alternate 2 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + /* Interface 2, Alternate 0 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + /* Interface 2, Alternate 1 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + /* Interface 2, Alternate 2 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) + +#define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin) \ + /* Standard Interface Association Descriptor (IAD) */\ + TUD_AUDIO_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\ + /* Standard AC Interface Descriptor(4.7.1) */\ + TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + /* Clock Source Descriptor(4.7.2.1) */\ + TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ + /* Input Terminal Descriptor(4.7.2.4) */\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + /* Feature Unit Descriptor(4.7.2.8) */\ + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ + /* Output Terminal Descriptor(4.7.2.5) */\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + /* Input Terminal Descriptor(4.7.2.4) */\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + /* Output Terminal Descriptor(4.7.2.5) */\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + /* Standard AS Interface Descriptor(4.9.1) */\ + /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + /* Standard AS Interface Descriptor(4.9.1) */\ + /* Interface 1, Alternate 1 - alternate interface for data streaming */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + /* Class-Specific AS Interface Descriptor(4.9.2) */\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ + TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + /* Interface 1, Alternate 2 - alternate interface for data streaming */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + /* Class-Specific AS Interface Descriptor(4.9.2) */\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ + TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + /* Standard AS Interface Descriptor(4.9.1) */\ + /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + /* Standard AS Interface Descriptor(4.9.1) */\ + /* Interface 2, Alternate 1 - alternate interface for data streaming */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + /* Class-Specific AS Interface Descriptor(4.9.2) */\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ + TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + /* Interface 2, Alternate 2 - alternate interface for data streaming */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + /* Class-Specific AS Interface Descriptor(4.9.2) */\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ + TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + +#endif diff --git a/tinyusb/examples/device/usbtmc/CMakeLists.txt b/tinyusb/examples/device/usbtmc/CMakeLists.txt new file mode 100755 index 00000000..c49603c2 --- /dev/null +++ b/tinyusb/examples/device/usbtmc/CMakeLists.txt @@ -0,0 +1,29 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usbtmc_app.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/usbtmc/Makefile b/tinyusb/examples/device/usbtmc/Makefile new file mode 100755 index 00000000..69b633fe --- /dev/null +++ b/tinyusb/examples/device/usbtmc/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/usbtmc/src/main.c b/tinyusb/examples/device/usbtmc/src/main.c new file mode 100755 index 00000000..1fce48f4 --- /dev/null +++ b/tinyusb/examples/device/usbtmc/src/main.c @@ -0,0 +1,143 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" +#include "usbtmc_app.h" +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 0 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 0, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + usbtmc_app_task_iter(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK + Indicator pulse +//--------------------------------------------------------------------+ + + +volatile uint8_t doPulse = false; +// called from USB context +void led_indicator_pulse(void) { + doPulse = true; +} + +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + if(blink_interval_ms == BLINK_MOUNTED) // Mounted + { + if(doPulse) + { + led_state = true; + board_led_write(true); + start_ms = board_millis(); + doPulse = false; + } + else if (led_state == true) + { + if ( board_millis() - start_ms < 750) //Spec says blink must be between 500 and 1000 ms. + { + return; // not enough time + } + led_state = false; + board_led_write(false); + } + } + else + { + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle + } +} diff --git a/tinyusb/examples/device/usbtmc/src/main.h b/tinyusb/examples/device/usbtmc/src/main.h new file mode 100755 index 00000000..673247ec --- /dev/null +++ b/tinyusb/examples/device/usbtmc/src/main.h @@ -0,0 +1,5 @@ +#ifndef MAIN_H +#define MAIN_H +void led_indicator_pulse(void); + +#endif diff --git a/tinyusb/examples/device/usbtmc/src/tusb_config.h b/tinyusb/examples/device/usbtmc/src/tusb_config.h new file mode 100755 index 00000000..a192d0db --- /dev/null +++ b/tinyusb/examples/device/usbtmc/src/tusb_config.h @@ -0,0 +1,89 @@ +/* + * tusb_config.h + * + * Created on: Sep 5, 2019 + * Author: nconrad + */ + +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// + +#define CFG_TUD_USBTMC 1 +#define CFG_TUD_USBTMC_ENABLE_INT_EP 1 +#define CFG_TUD_USBTMC_ENABLE_488 1 + +#ifdef __cplusplus + } +#endif + +#endif /* TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/usbtmc/src/usb_descriptors.c b/tinyusb/examples/device/usbtmc/src/usb_descriptors.c new file mode 100755 index 00000000..2336266b --- /dev/null +++ b/tinyusb/examples/device/usbtmc/src/usb_descriptors.c @@ -0,0 +1,194 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "class/usbtmc/usbtmc.h" +#include "class/usbtmc/usbtmc_device.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +#if defined(CFG_TUD_USBTMC) + +# define TUD_USBTMC_DESC_MAIN(_itfnum,_bNumEndpoints) \ + TUD_USBTMC_IF_DESCRIPTOR(_itfnum, _bNumEndpoints, /*_stridx = */ 4u, TUD_USBTMC_PROTOCOL_USB488), \ + TUD_USBTMC_BULK_DESCRIPTORS(/* OUT = */0x01, /* IN = */ 0x81, /* packet size = */USBTMCD_MAX_PACKET_SIZE) + +#if CFG_TUD_USBTMC_ENABLE_INT_EP +// USBTMC Interrupt xfer always has length of 2, but we use epMaxSize=8 for +// compatibility with mcus that only allow 8, 16, 32 or 64 for FS endpoints +# define TUD_USBTMC_DESC(_itfnum) \ + TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 3), \ + TUD_USBTMC_INT_DESCRIPTOR(/* INT ep # */ 0x82, /* epMaxSize = */ 8, /* bInterval = */16u ) +# define TUD_USBTMC_DESC_LEN (TUD_USBTMC_IF_DESCRIPTOR_LEN + TUD_USBTMC_BULK_DESCRIPTORS_LEN + TUD_USBTMC_INT_DESCRIPTOR_LEN) + +#else + +# define TUD_USBTMC_DESC(_itfnum) \ + TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 2u) +# define TUD_USBTMC_DESC_LEN (TUD_USBTMC_IF_DESCRIPTOR_LEN + TUD_USBTMC_BULK_DESCRIPTORS_LEN) + +#endif /* CFG_TUD_USBTMC_ENABLE_INT_EP */ + +#else +# define USBTMC_DESC_LEN (0) +#endif /* CFG_TUD_USBTMC */ + +enum +{ + ITF_NUM_USBTMC, + ITF_NUM_TOTAL +}; + + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_USBTMC_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + // Note: since CDC EP ( 1 & 2), HID (4) are spot-on, thus we only need to force + // endpoint number for MSC to 5 + #define EPNUM_MSC 0x05 +#else + #define EPNUM_MSC 0x03 +#endif + + +uint8_t const desc_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + TUD_USBTMC_DESC(ITF_NUM_USBTMC), +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID + "TinyUSB USBTMC", // 4: USBTMC +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + size_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + } + else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) { + chr_count = 31; + } + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u)); + + return _desc_str; +} diff --git a/tinyusb/examples/device/usbtmc/src/usbtmc_app.c b/tinyusb/examples/device/usbtmc/src/usbtmc_app.c new file mode 100755 index 00000000..8f87a6dc --- /dev/null +++ b/tinyusb/examples/device/usbtmc/src/usbtmc_app.c @@ -0,0 +1,329 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Nathan Conrad + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <strings.h> +#include <stdlib.h> /* atoi */ +#include "tusb.h" +#include "bsp/board.h" +#include "main.h" + +#if (CFG_TUD_USBTMC_ENABLE_488) +static usbtmc_response_capabilities_488_t const +#else +static usbtmc_response_capabilities_t const +#endif +tud_usbtmc_app_capabilities = +{ + .USBTMC_status = USBTMC_STATUS_SUCCESS, + .bcdUSBTMC = USBTMC_VERSION, + .bmIntfcCapabilities = + { + .listenOnly = 0, + .talkOnly = 0, + .supportsIndicatorPulse = 1 + }, + .bmDevCapabilities = { + .canEndBulkInOnTermChar = 0 + }, + +#if (CFG_TUD_USBTMC_ENABLE_488) + .bcdUSB488 = USBTMC_488_VERSION, + .bmIntfcCapabilities488 = + { + .supportsTrigger = 1, + .supportsREN_GTL_LLO = 0, + .is488_2 = 1 + }, + .bmDevCapabilities488 = + { + .SCPI = 1, + .SR1 = 0, + .RL1 = 0, + .DT1 =0, + } +#endif +}; + +#define IEEE4882_STB_QUESTIONABLE (0x08u) +#define IEEE4882_STB_MAV (0x10u) +#define IEEE4882_STB_SER (0x20u) +#define IEEE4882_STB_SRQ (0x40u) + +static const char idn[] = "TinyUSB,ModelNumber,SerialNumber,FirmwareVer123456\r\n"; +//static const char idn[] = "TinyUSB,ModelNumber,SerialNumber,FirmwareVer and a bunch of other text to make it longer than a packet, perhaps? lets make it three transfers...\n"; +static volatile uint8_t status; + +// 0=not query, 1=queried, 2=delay,set(MAV), 3=delay 4=ready? +// (to simulate delay) +static volatile uint16_t queryState = 0; +static volatile uint32_t queryDelayStart; +static volatile uint32_t bulkInStarted; +static volatile uint32_t idnQuery; + +static uint32_t resp_delay = 125u; // Adjustable delay, to allow for better testing +static size_t buffer_len; +static size_t buffer_tx_ix; // for transmitting using multiple transfers +static uint8_t buffer[225]; // A few packets long should be enough. + + +static usbtmc_msg_dev_dep_msg_in_header_t rspMsg = { + .bmTransferAttributes = + { + .EOM = 1, + .UsingTermChar = 0 + } +}; + +void tud_usbtmc_open_cb(uint8_t interface_id) +{ + (void)interface_id; + tud_usbtmc_start_bus_read(); +} + +#if (CFG_TUD_USBTMC_ENABLE_488) +usbtmc_response_capabilities_488_t const * +#else +usbtmc_response_capabilities_t const * +#endif +tud_usbtmc_get_capabilities_cb() +{ + return &tud_usbtmc_app_capabilities; +} + + +bool tud_usbtmc_msg_trigger_cb(usbtmc_msg_generic_t* msg) { + (void)msg; + // Let trigger set the SRQ + status |= IEEE4882_STB_SRQ; + return true; +} + +bool tud_usbtmc_msgBulkOut_start_cb(usbtmc_msg_request_dev_dep_out const * msgHeader) +{ + (void)msgHeader; + buffer_len = 0; + if(msgHeader->TransferSize > sizeof(buffer)) + { + + return false; + } + return true; +} + +bool tud_usbtmc_msg_data_cb(void *data, size_t len, bool transfer_complete) +{ + // If transfer isn't finished, we just ignore it (for now) + + if(len + buffer_len < sizeof(buffer)) + { + memcpy(&(buffer[buffer_len]), data, len); + buffer_len += len; + } + else + { + return false; // buffer overflow! + } + queryState = transfer_complete; + idnQuery = 0; + + if(transfer_complete && (len >=4) && !strncasecmp("*idn?",data,4)) + { + idnQuery = 1; + } + if(transfer_complete && !strncasecmp("delay ",data,5)) + { + queryState = 0; + int d = atoi((char*)data + 5); + if(d > 10000) + d = 10000; + if(d<0) + d=0; + resp_delay = (uint32_t)d; + } + tud_usbtmc_start_bus_read(); + return true; +} + +bool tud_usbtmc_msgBulkIn_complete_cb() +{ + if((buffer_tx_ix == buffer_len) || idnQuery) // done + { + status &= (uint8_t)~(IEEE4882_STB_MAV); // clear MAV + queryState = 0; + bulkInStarted = 0; + buffer_tx_ix = 0; + } + tud_usbtmc_start_bus_read(); + + return true; +} + +static unsigned int msgReqLen; + +bool tud_usbtmc_msgBulkIn_request_cb(usbtmc_msg_request_dev_dep_in const * request) +{ + rspMsg.header.MsgID = request->header.MsgID, + rspMsg.header.bTag = request->header.bTag, + rspMsg.header.bTagInverse = request->header.bTagInverse; + msgReqLen = request->TransferSize; + +#ifdef xDEBUG + uart_tx_str_sync("MSG_IN_DATA: Requested!\r\n"); +#endif + if(queryState == 0 || (buffer_tx_ix == 0)) + { + TU_ASSERT(bulkInStarted == 0); + bulkInStarted = 1; + + // > If a USBTMC interface receives a Bulk-IN request prior to receiving a USBTMC command message + // that expects a response, the device must NAK the request (*not stall*) + } + else + { + size_t txlen = tu_min32(buffer_len-buffer_tx_ix,msgReqLen); + tud_usbtmc_transmit_dev_msg_data(&buffer[buffer_tx_ix], txlen, + (buffer_tx_ix+txlen) == buffer_len, false); + buffer_tx_ix += txlen; + } + // Always return true indicating not to stall the EP. + return true; +} + +void usbtmc_app_task_iter(void) { + switch(queryState) { + case 0: + break; + case 1: + queryDelayStart = board_millis(); + queryState = 2; + break; + case 2: + if( (board_millis() - queryDelayStart) > resp_delay) { + queryDelayStart = board_millis(); + queryState=3; + status |= 0x10u; // MAV + status |= 0x40u; // SRQ + } + break; + case 3: + if( (board_millis() - queryDelayStart) > resp_delay) { + queryState = 4; + } + break; + case 4: // time to transmit; + if(bulkInStarted && (buffer_tx_ix == 0)) { + if(idnQuery) + { + tud_usbtmc_transmit_dev_msg_data(idn, tu_min32(sizeof(idn)-1,msgReqLen),true,false); + queryState = 0; + bulkInStarted = 0; + } + else + { + buffer_tx_ix = tu_min32(buffer_len,msgReqLen); + tud_usbtmc_transmit_dev_msg_data(buffer, buffer_tx_ix, buffer_tx_ix == buffer_len, false); + } + // MAV is cleared in the transfer complete callback. + } + break; + default: + TU_ASSERT(false,); + return; + } +} + +bool tud_usbtmc_initiate_clear_cb(uint8_t *tmcResult) +{ + *tmcResult = USBTMC_STATUS_SUCCESS; + queryState = 0; + bulkInStarted = false; + status = 0; + return true; +} + +bool tud_usbtmc_check_clear_cb(usbtmc_get_clear_status_rsp_t *rsp) +{ + queryState = 0; + bulkInStarted = false; + status = 0; + buffer_tx_ix = 0u; + buffer_len = 0u; + rsp->USBTMC_status = USBTMC_STATUS_SUCCESS; + rsp->bmClear.BulkInFifoBytes = 0u; + return true; +} +bool tud_usbtmc_initiate_abort_bulk_in_cb(uint8_t *tmcResult) +{ + bulkInStarted = 0; + *tmcResult = USBTMC_STATUS_SUCCESS; + return true; +} +bool tud_usbtmc_check_abort_bulk_in_cb(usbtmc_check_abort_bulk_rsp_t *rsp) +{ + (void)rsp; + tud_usbtmc_start_bus_read(); + return true; +} + +bool tud_usbtmc_initiate_abort_bulk_out_cb(uint8_t *tmcResult) +{ + *tmcResult = USBTMC_STATUS_SUCCESS; + return true; + +} +bool tud_usbtmc_check_abort_bulk_out_cb(usbtmc_check_abort_bulk_rsp_t *rsp) +{ + (void)rsp; + tud_usbtmc_start_bus_read(); + return true; +} + +void tud_usbtmc_bulkIn_clearFeature_cb(void) +{ +} +void tud_usbtmc_bulkOut_clearFeature_cb(void) +{ + tud_usbtmc_start_bus_read(); +} + +// Return status byte, but put the transfer result status code in the rspResult argument. +uint8_t tud_usbtmc_get_stb_cb(uint8_t *tmcResult) +{ + uint8_t old_status = status; + status = (uint8_t)(status & ~(IEEE4882_STB_SRQ)); // clear SRQ + + *tmcResult = USBTMC_STATUS_SUCCESS; + // Increment status so that we see different results on each read... + + return old_status; +} + +bool tud_usbtmc_indicator_pulse_cb(tusb_control_request_t const * msg, uint8_t *tmcResult) +{ + (void)msg; + led_indicator_pulse(); + *tmcResult = USBTMC_STATUS_SUCCESS; + return true; +} diff --git a/tinyusb/examples/device/usbtmc/src/usbtmc_app.h b/tinyusb/examples/device/usbtmc/src/usbtmc_app.h new file mode 100755 index 00000000..4de30c2b --- /dev/null +++ b/tinyusb/examples/device/usbtmc/src/usbtmc_app.h @@ -0,0 +1,7 @@ + +#ifndef USBTMC_APP_H +#define USBTMC_APP_H + +void usbtmc_app_task_iter(void); + +#endif diff --git a/tinyusb/examples/device/usbtmc/visaQuery.py b/tinyusb/examples/device/usbtmc/visaQuery.py new file mode 100755 index 00000000..50a765a0 --- /dev/null +++ b/tinyusb/examples/device/usbtmc/visaQuery.py @@ -0,0 +1,209 @@ +#!/usr/bin/env python3 + +import visa +import time +import sys + + +def test_idn(): + idn = inst.query("*idn?"); + assert (idn == "TinyUSB,ModelNumber,SerialNumber,FirmwareVer123456\r\n") + assert (inst.is_4882_compliant) + +def test_echo(m,n): + longstr = "0123456789abcdefghijklmnopqrstuvwxyz" * 50 + t0 = time.monotonic() + + #Next try echo from 1 to 175 characters (200 is max buffer size on DUT) + for i in range(m,n): + #print(i) + x = longstr[0:i] + xt = x + inst.write_termination + y = inst.query(x) + #print(x) + #print (":".join("{:02x}".format(ord(c)) for c in xt)) + #print (":".join("{:02x}".format(ord(c)) for c in y)) + assert(xt == y), f"failed i={i}" + #inst.read_stb();# Just to make USB logging easier by sending a control query (bad thing is that this made things slow) + t = time.monotonic() - t0 + print(f" elapsed: {t:0.3} sec") + +def test_trig(): + # clear SRQ + inst.read_stb() + assert (inst.read_stb() == 0) + inst.assert_trigger() + time.sleep(0.3) # SRQ may have some delay + assert (inst.read_stb() & 0x40), "SRQ not set after 0.3 seconds" + assert (inst.read_stb() == 0) + + +def test_mav(): + inst.write("delay 50") + inst.read_stb() # clear STB + assert (inst.read_stb() == 0) + inst.write("123") + time.sleep(0.3) + assert (inst.read_stb() & 0x10), "MAV not set after 0.5 seconds" + + rsp = inst.read() + assert(rsp == "123\r\n") + + +def test_srq(): + assert (inst.read_stb() == 0) + inst.write("123") + + #inst.enable_event(visa.constants.VI_EVENT_SERVICE_REQ, visa.constants.VI_QUEUE) + #waitrsp = inst.wait_on_event(visa.constants.VI_EVENT_SERVICE_REQ, 5000) + #inst.discard_events(visa.constants.VI_EVENT_SERVICE_REQ, visa.constants.VI_QUEUE) + #inst.wait_for_srq() + time.sleep(0.3) + stb = inst.read_stb() + msg = "SRQ not set after 0.5 seconds, was {:02x}".format(stb) + assert (stb == 0x50),msg + + assert (inst.read_stb() == 0x10), "SRQ set at second read!" + + rsp = inst.read() + assert(rsp == "123\r\n") + +def test_read_timeout(): + inst.timeout = 500 + # First read with no MAV + inst.read_stb() + assert (inst.read_stb() == 0) + inst.write("delay 500") + t0 = time.monotonic() + try: + rsp = inst.read() + assert(false), "Read should have resulted in timeout" + except visa.VisaIOError: + print(" Got expected exception") + t = time.monotonic() - t0 + assert ((t*1000.0) > (inst.timeout - 300)) + assert ((t*1000.0) < (inst.timeout + 300)) + print(f"Delay was {t:0.3}") + # Response is still in queue, so send a clear (to be more helpful to the next test) + inst.clear() + time.sleep(0.3) + assert(0 == (inst.read_stb() & 0x10)), "MAV not reset after clear" + +def test_abort_in(): + inst.timeout = 200 + # First read with no MAV + inst.read_stb() + assert (inst.read_stb() == 0) + inst.write("delay 500") + inst.write("xxx") + t0 = time.monotonic() + try: + rsp = inst.read() + assert(false), "Read should have resulted in timeout" + except visa.VisaIOError: + print(" Got expected exception") + t = time.monotonic() - t0 + assert ((t*1000.0) > (inst.timeout - 300)) + assert ((t*1000.0) < (inst.timeout + 300)) + print(f" Delay was {t:0.3}") + # Response is still in queue, so send a clear (to be more helpful to the next test) + inst.timeout = 800 + y = inst.read() + assert(y == "xxx\r\n") + +def test_indicate(): + # perform indicator pulse + usb_iface = inst.get_visa_attribute(visa.constants.VI_ATTR_USB_INTFC_NUM) + retv = inst.control_in(request_type_bitmap_field=0xA1, request_id=64, request_value=0x0000, index=usb_iface, length=0x0001) + assert((retv[1] == visa.constants.StatusCode(0)) and (retv[0] == b'\x01')), f"indicator pulse failed: retv={retv}" + + +def test_multi_read(): + old_chunk_size = inst.chunk_size + longstr = "0123456789abcdefghijklmnopqrstuvwxyz" * 10 + timeout = 10 + x = longstr[0:174] + inst.chunk_size = 50 # Seems chunk size only applies to read but not write + inst.write(x) + # I'm not sure how to request just the remaining bit using a max count... so just read it all. + y = inst.read() + assert (x + "\r\n" == y) + #inst.chunk_size = old_chunk_size + +def test_stall_ep0(): + usb_iface = inst.get_visa_attribute(visa.constants.VI_ATTR_USB_INTFC_NUM) + inst.read_stb() + # This is an invalid request, should create stall. + try: + retv = inst.control_in(request_type_bitmap_field=0xA1, request_id=60, request_value=0x0000, index=usb_iface, length=0x0001) + assert false + except visa.VisaIOError: + pass + + assert (inst.read_stb() == 0) + + +rm = visa.ResourceManager() +reslist = rm.list_resources("USB?::?*::INSTR") +print(reslist) + +if (len(reslist) == 0): + sys.exit() + +inst = rm.open_resource(reslist[0]); +inst.timeout = 3000 + +inst.clear() + +print("+ IDN") +test_idn() + +print("+test abort in") +test_abort_in() + + +inst.timeout = 2000 + +print("+ multi read") +test_multi_read() + + +print("+ echo delay=0") +inst.write("delay 0") +test_echo(1,175) + +print("+ echo delay=2") +inst.write("delay 2") +test_echo(1,175) + +print("+ echo delay=150") +inst.write("delay 150") +test_echo(53,76) +test_echo(165,170) + +print("+ Read timeout (no MAV)") +test_read_timeout() + +print("+ Test EP0 stall recovery") +test_stall_ep0() + +print("+ MAV") +test_mav() + +print("+ SRQ") +test_srq() + +print("+ indicate") +test_indicate() + +print("+ TRIG") +test_trig() + +# Untested: +# abort bulk out +# LLO, GTL, etc +# Throughput rate? +# Transmitting a message using multiple transfers + +inst.close() +print("Test complete") diff --git a/tinyusb/examples/device/webusb_serial/CMakeLists.txt b/tinyusb/examples/device/webusb_serial/CMakeLists.txt new file mode 100755 index 00000000..abc4d91d --- /dev/null +++ b/tinyusb/examples/device/webusb_serial/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/device/webusb_serial/Makefile b/tinyusb/examples/device/webusb_serial/Makefile new file mode 100755 index 00000000..5a455078 --- /dev/null +++ b/tinyusb/examples/device/webusb_serial/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/tinyusb/examples/device/webusb_serial/src/main.c b/tinyusb/examples/device/webusb_serial/src/main.c new file mode 100755 index 00000000..aba4aedf --- /dev/null +++ b/tinyusb/examples/device/webusb_serial/src/main.c @@ -0,0 +1,300 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* This example demonstrates WebUSB as web serial with browser with WebUSB support (e.g Chrome). + * After enumerated successfully, browser will pop-up notification + * with URL to landing page, click on it to test + * - Click "Connect" and select device, When connected the on-board LED will litted up. + * - Any charters received from either webusb/Serial will be echo back to webusb and Serial + * + * Note: + * - The WebUSB landing page notification is currently disabled in Chrome + * on Windows due to Chromium issue 656702 (https://crbug.com/656702). You have to + * go to landing page (below) to test + * + * - On Windows 7 and prior: You need to use Zadig tool to manually bind the + * WebUSB interface with the WinUSB driver for Chrome to access. From windows 8 and 10, this + * is done automatically by firmware. + * + * - On Linux/macOS, udev permission may need to be updated by + * - copying '/examples/device/99-tinyusb.rules' file to /etc/udev/rules.d/ then + * - run 'sudo udevadm control --reload-rules && sudo udevadm trigger' + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, + + BLINK_ALWAYS_ON = UINT32_MAX, + BLINK_ALWAYS_OFF = 0 +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +#define URL "example.tinyusb.org/webusb-serial/" + +const tusb_desc_webusb_url_t desc_url = +{ + .bLength = 3 + sizeof(URL) - 1, + .bDescriptorType = 3, // WEBUSB URL type + .bScheme = 1, // 0: http, 1: https + .url = URL +}; + +static bool web_serial_connected = false; + +//------------- prototypes -------------// +void led_blinking_task(void); +void cdc_task(void); +void webserial_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + cdc_task(); + webserial_task(); + led_blinking_task(); + } + + return 0; +} + +// send characters to both CDC and WebUSB +void echo_all(uint8_t buf[], uint32_t count) +{ + // echo to web serial + if ( web_serial_connected ) + { + tud_vendor_write(buf, count); + } + + // echo to cdc + if ( tud_cdc_connected() ) + { + for(uint32_t i=0; i<count; i++) + { + tud_cdc_write_char(buf[i]); + + if ( buf[i] == '\r' ) tud_cdc_write_char('\n'); + } + tud_cdc_write_flush(); + } +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// WebUSB use vendor class +//--------------------------------------------------------------------+ + +// Invoked when a control transfer occurred on an interface of this class +// Driver response accordingly to the request and the transfer stage (setup/data/ack) +// return false to stall control endpoint (e.g unsupported request) +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) +{ + // nothing to with DATA & ACK stage + if (stage != CONTROL_STAGE_SETUP) return true; + + switch (request->bmRequestType_bit.type) + { + case TUSB_REQ_TYPE_VENDOR: + switch (request->bRequest) + { + case VENDOR_REQUEST_WEBUSB: + // match vendor request in BOS descriptor + // Get landing page url + return tud_control_xfer(rhport, request, (void*) &desc_url, desc_url.bLength); + + case VENDOR_REQUEST_MICROSOFT: + if ( request->wIndex == 7 ) + { + // Get Microsoft OS 2.0 compatible descriptor + uint16_t total_len; + memcpy(&total_len, desc_ms_os_20+8, 2); + + return tud_control_xfer(rhport, request, (void*) desc_ms_os_20, total_len); + }else + { + return false; + } + + default: break; + } + break; + + case TUSB_REQ_TYPE_CLASS: + if (request->bRequest == 0x22) + { + // Webserial simulate the CDC_REQUEST_SET_CONTROL_LINE_STATE (0x22) to connect and disconnect. + web_serial_connected = (request->wValue != 0); + + // Always lit LED if connected + if ( web_serial_connected ) + { + board_led_write(true); + blink_interval_ms = BLINK_ALWAYS_ON; + + tud_vendor_write_str("\r\nTinyUSB WebUSB device example\r\n"); + }else + { + blink_interval_ms = BLINK_MOUNTED; + } + + // response with status OK + return tud_control_status(rhport, request); + } + break; + + default: break; + } + + // stall unknown request + return false; +} + +void webserial_task(void) +{ + if ( web_serial_connected ) + { + if ( tud_vendor_available() ) + { + uint8_t buf[64]; + uint32_t count = tud_vendor_read(buf, sizeof(buf)); + + // echo back to both web serial and cdc + echo_all(buf, count); + } + } +} + + +//--------------------------------------------------------------------+ +// USB CDC +//--------------------------------------------------------------------+ +void cdc_task(void) +{ + if ( tud_cdc_connected() ) + { + // connected and there are data available + if ( tud_cdc_available() ) + { + uint8_t buf[64]; + + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + + // echo back to both web serial and cdc + echo_all(buf, count); + } + } +} + +// Invoked when cdc when line state changed e.g connected/disconnected +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) +{ + (void) itf; + + // connected + if ( dtr && rts ) + { + // print initial message when connected + tud_cdc_write_str("\r\nTinyUSB WebUSB device example\r\n"); + } +} + +// Invoked when CDC interface received data from host +void tud_cdc_rx_cb(uint8_t itf) +{ + (void) itf; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/device/webusb_serial/src/tusb_config.h b/tinyusb/examples/device/webusb_serial/src/tusb_config.h new file mode 100755 index 00000000..26b81b38 --- /dev/null +++ b/tinyusb/examples/device/webusb_serial/src/tusb_config.h @@ -0,0 +1,118 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 1 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 1 + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// Vendor FIFO size of TX and RX +// If not configured vendor endpoints will not be buffered +#define CFG_TUD_VENDOR_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_VENDOR_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/device/webusb_serial/src/usb_descriptors.c b/tinyusb/examples/device/webusb_serial/src/usb_descriptors.c new file mode 100755 index 00000000..d1539488 --- /dev/null +++ b/tinyusb/examples/device/webusb_serial/src/usb_descriptors.c @@ -0,0 +1,252 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "usb_descriptors.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0210, // at least 2.1 or 3.x for BOS & webUSB + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ +enum +{ + ITF_NUM_CDC = 0, + ITF_NUM_CDC_DATA, + ITF_NUM_VENDOR, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_VENDOR_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_CDC_IN 2 + #define EPNUM_CDC_OUT 2 + #define EPNUM_VENDOR_IN 5 + #define EPNUM_VENDOR_OUT 5 +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_IN 2 + #define EPNUM_CDC_OUT 3 + #define EPNUM_VENDOR_IN 4 + #define EPNUM_VENDOR_OUT 5 +#else + #define EPNUM_CDC_IN 2 + #define EPNUM_CDC_OUT 2 + #define EPNUM_VENDOR_IN 3 + #define EPNUM_VENDOR_OUT 3 +#endif + +uint8_t const desc_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC_OUT, 0x80 | EPNUM_CDC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), + + // Interface number, string index, EP Out & IN address, EP size + TUD_VENDOR_DESCRIPTOR(ITF_NUM_VENDOR, 5, EPNUM_VENDOR_OUT, 0x80 | EPNUM_VENDOR_IN, TUD_OPT_HIGH_SPEED ? 512 : 64) +}; + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// BOS Descriptor +//--------------------------------------------------------------------+ + +/* Microsoft OS 2.0 registry property descriptor +Per MS requirements https://msdn.microsoft.com/en-us/library/windows/hardware/hh450799(v=vs.85).aspx +device should create DeviceInterfaceGUIDs. It can be done by driver and +in case of real PnP solution device should expose MS "Microsoft OS 2.0 +registry property descriptor". Such descriptor can insert any record +into Windows registry per device/configuration/interface. In our case it +will insert "DeviceInterfaceGUIDs" multistring property. + +GUID is freshly generated and should be OK to use. + +https://developers.google.com/web/fundamentals/native-hardware/build-for-webusb/ +(Section Microsoft OS compatibility descriptors) +*/ + +#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_WEBUSB_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) + +#define MS_OS_20_DESC_LEN 0xB2 + +// BOS Descriptor is required for webUSB +uint8_t const desc_bos[] = +{ + // total length, number of device caps + TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 2), + + // Vendor Code, iLandingPage + TUD_BOS_WEBUSB_DESCRIPTOR(VENDOR_REQUEST_WEBUSB, 1), + + // Microsoft OS 2.0 descriptor + TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, VENDOR_REQUEST_MICROSOFT) +}; + +uint8_t const * tud_descriptor_bos_cb(void) +{ + return desc_bos; +} + + +uint8_t const desc_ms_os_20[] = +{ + // Set header: length, type, windows version, total length + U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), U16_TO_U8S_LE(MS_OS_20_DESC_LEN), + + // Configuration subset header: length, type, configuration index, reserved, configuration total length + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A), + + // Function Subset header: length, type, first interface, reserved, subset length + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_VENDOR, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08), + + // MS OS 2.0 Compatible ID descriptor: length, type, compatible ID, sub compatible ID + U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'U', 'S', 'B', 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible + + // MS OS 2.0 Registry property descriptor: length, type + U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08-0x08-0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), + U16_TO_U8S_LE(0x0007), U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 + 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, + 'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, + U16_TO_U8S_LE(0x0050), // wPropertyDataLength + //bPropertyData: “{975F44D9-0D08-43FD-8B3E-127CA8AFFF9D}”. + '{', 0x00, '9', 0x00, '7', 0x00, '5', 0x00, 'F', 0x00, '4', 0x00, '4', 0x00, 'D', 0x00, '9', 0x00, '-', 0x00, + '0', 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, + '8', 0x00, 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, + '8', 0x00, 'A', 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +TU_VERIFY_STATIC(sizeof(desc_ms_os_20) == MS_OS_20_DESC_LEN, "Incorrect size"); + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456", // 3: Serials, should use chip ID + "TinyUSB CDC", // 4: CDC Interface + "TinyUSB WebUSB" // 5: Vendor Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + + return _desc_str; +} diff --git a/tinyusb/examples/device/webusb_serial/src/usb_descriptors.h b/tinyusb/examples/device/webusb_serial/src/usb_descriptors.h new file mode 100755 index 00000000..19f1ff3f --- /dev/null +++ b/tinyusb/examples/device/webusb_serial/src/usb_descriptors.h @@ -0,0 +1,36 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ + +enum +{ + VENDOR_REQUEST_WEBUSB = 1, + VENDOR_REQUEST_MICROSOFT = 2 +}; + +extern uint8_t const desc_ms_os_20[]; + +#endif /* USB_DESCRIPTORS_H_ */ diff --git a/tinyusb/examples/host/CMakeLists.txt b/tinyusb/examples/host/CMakeLists.txt new file mode 100755 index 00000000..f185ac4f --- /dev/null +++ b/tinyusb/examples/host/CMakeLists.txt @@ -0,0 +1,9 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) + +project(tinyusb_host_examples) +family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR}) + +# family_add_subdirectory will filter what to actually add based on selected FAMILY +family_add_subdirectory(cdc_msc_hid) diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC18XX b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC18XX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC18XX diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC40XX b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC40XX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC40XX diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC43XX b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC43XX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC43XX diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_RP2040 b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_RP2040 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_RP2040 diff --git a/tinyusb/examples/host/cdc_msc_hid/CMakeLists.txt b/tinyusb/examples/host/cdc_msc_hid/CMakeLists.txt new file mode 100755 index 00000000..0a99bc3a --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/CMakeLists.txt @@ -0,0 +1,29 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/host/cdc_msc_hid/Makefile b/tinyusb/examples/host/cdc_msc_hid/Makefile new file mode 100755 index 00000000..6a2b4d90 --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/Makefile @@ -0,0 +1,27 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +CFLAGS += -Wno-error=cast-align + +# TinyUSB Host Stack source +SRC_C += \ + src/class/cdc/cdc_host.c \ + src/class/hid/hid_host.c \ + src/class/msc/msc_host.c \ + src/host/hub.c \ + src/host/usbh.c \ + src/host/usbh_control.c \ + src/portable/ehci/ehci.c \ + src/portable/ohci/ohci.c \ + src/portable/nxp/transdimension/hcd_transdimension.c \ + src/portable/nxp/lpc17_40/hcd_lpc17_40.c + +include ../../rules.mk diff --git a/tinyusb/examples/host/cdc_msc_hid/src/hid_app.c b/tinyusb/examples/host/cdc_msc_hid/src/hid_app.c new file mode 100755 index 00000000..11437c2b --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/src/hid_app.c @@ -0,0 +1,296 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +// If your host terminal support ansi escape code such as TeraTerm +// it can be use to simulate mouse cursor movement within terminal +#define USE_ANSI_ESCAPE 0 + +#define MAX_REPORT 4 + +static uint8_t const keycode2ascii[128][2] = { HID_KEYCODE_TO_ASCII }; + +// Each HID instance can has multiple reports +static struct +{ + uint8_t report_count; + tuh_hid_report_info_t report_info[MAX_REPORT]; +}hid_info[CFG_TUH_HID]; + +static void process_kbd_report(hid_keyboard_report_t const *report); +static void process_mouse_report(hid_mouse_report_t const * report); +static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len); + +void hid_app_task(void) +{ + // nothing to do +} + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +// Invoked when device with hid interface is mounted +// Report descriptor is also available for use. tuh_hid_parse_report_descriptor() +// can be used to parse common/simple enough descriptor. +// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped +// therefore report_desc = NULL, desc_len = 0 +void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len) +{ + printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance); + + // Interface protocol (hid_interface_protocol_enum_t) + const char* protocol_str[] = { "None", "Keyboard", "Mouse" }; + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + + printf("HID Interface Protocol = %s\r\n", protocol_str[itf_protocol]); + + // By default host stack will use activate boot protocol on supported interface. + // Therefore for this simple example, we only need to parse generic report descriptor (with built-in parser) + if ( itf_protocol == HID_ITF_PROTOCOL_NONE ) + { + hid_info[instance].report_count = tuh_hid_parse_report_descriptor(hid_info[instance].report_info, MAX_REPORT, desc_report, desc_len); + printf("HID has %u reports \r\n", hid_info[instance].report_count); + } + + // request to receive report + // tuh_hid_report_received_cb() will be invoked when report is available + if ( !tuh_hid_receive_report(dev_addr, instance) ) + { + printf("Error: cannot request to receive report\r\n"); + } +} + +// Invoked when device with hid interface is un-mounted +void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) +{ + printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance); +} + +// Invoked when received report from device via interrupt endpoint +void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) +{ + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + + switch (itf_protocol) + { + case HID_ITF_PROTOCOL_KEYBOARD: + TU_LOG2("HID receive boot keyboard report\r\n"); + process_kbd_report( (hid_keyboard_report_t const*) report ); + break; + + case HID_ITF_PROTOCOL_MOUSE: + TU_LOG2("HID receive boot mouse report\r\n"); + process_mouse_report( (hid_mouse_report_t const*) report ); + break; + + default: + // Generic report requires matching ReportID and contents with previous parsed report info + process_generic_report(dev_addr, instance, report, len); + break; + } + + // continue to request to receive report + if ( !tuh_hid_receive_report(dev_addr, instance) ) + { + printf("Error: cannot request to receive report\r\n"); + } +} + +//--------------------------------------------------------------------+ +// Keyboard +//--------------------------------------------------------------------+ + +// look up new key in previous keys +static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) +{ + for(uint8_t i=0; i<6; i++) + { + if (report->keycode[i] == keycode) return true; + } + + return false; +} + +static void process_kbd_report(hid_keyboard_report_t const *report) +{ + static hid_keyboard_report_t prev_report = { 0, 0, {0} }; // previous report to check key released + + //------------- example code ignore control (non-printable) key affects -------------// + for(uint8_t i=0; i<6; i++) + { + if ( report->keycode[i] ) + { + if ( find_key_in_report(&prev_report, report->keycode[i]) ) + { + // exist in previous report means the current key is holding + }else + { + // not existed in previous report means the current key is pressed + bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT); + uint8_t ch = keycode2ascii[report->keycode[i]][is_shift ? 1 : 0]; + putchar(ch); + if ( ch == '\r' ) putchar('\n'); // added new line for enter key + + fflush(stdout); // flush right away, else nanolib will wait for newline + } + } + // TODO example skips key released + } + + prev_report = *report; +} + +//--------------------------------------------------------------------+ +// Mouse +//--------------------------------------------------------------------+ + +void cursor_movement(int8_t x, int8_t y, int8_t wheel) +{ +#if USE_ANSI_ESCAPE + // Move X using ansi escape + if ( x < 0) + { + printf(ANSI_CURSOR_BACKWARD(%d), (-x)); // move left + }else if ( x > 0) + { + printf(ANSI_CURSOR_FORWARD(%d), x); // move right + } + + // Move Y using ansi escape + if ( y < 0) + { + printf(ANSI_CURSOR_UP(%d), (-y)); // move up + }else if ( y > 0) + { + printf(ANSI_CURSOR_DOWN(%d), y); // move down + } + + // Scroll using ansi escape + if (wheel < 0) + { + printf(ANSI_SCROLL_UP(%d), (-wheel)); // scroll up + }else if (wheel > 0) + { + printf(ANSI_SCROLL_DOWN(%d), wheel); // scroll down + } + + printf("\r\n"); +#else + printf("(%d %d %d)\r\n", x, y, wheel); +#endif +} + +static void process_mouse_report(hid_mouse_report_t const * report) +{ + static hid_mouse_report_t prev_report = { 0 }; + + //------------- button state -------------// + uint8_t button_changed_mask = report->buttons ^ prev_report.buttons; + if ( button_changed_mask & report->buttons) + { + printf(" %c%c%c ", + report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-', + report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-', + report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-'); + } + + //------------- cursor movement -------------// + cursor_movement(report->x, report->y, report->wheel); +} + +//--------------------------------------------------------------------+ +// Generic Report +//--------------------------------------------------------------------+ +static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) +{ + (void) dev_addr; + + uint8_t const rpt_count = hid_info[instance].report_count; + tuh_hid_report_info_t* rpt_info_arr = hid_info[instance].report_info; + tuh_hid_report_info_t* rpt_info = NULL; + + if ( rpt_count == 1 && rpt_info_arr[0].report_id == 0) + { + // Simple report without report ID as 1st byte + rpt_info = &rpt_info_arr[0]; + }else + { + // Composite report, 1st byte is report ID, data starts from 2nd byte + uint8_t const rpt_id = report[0]; + + // Find report id in the arrray + for(uint8_t i=0; i<rpt_count; i++) + { + if (rpt_id == rpt_info_arr[i].report_id ) + { + rpt_info = &rpt_info_arr[i]; + break; + } + } + + report++; + len--; + } + + if (!rpt_info) + { + printf("Couldn't find the report info for this report !\r\n"); + return; + } + + // For complete list of Usage Page & Usage checkout src/class/hid/hid.h. For examples: + // - Keyboard : Desktop, Keyboard + // - Mouse : Desktop, Mouse + // - Gamepad : Desktop, Gamepad + // - Consumer Control (Media Key) : Consumer, Consumer Control + // - System Control (Power key) : Desktop, System Control + // - Generic (vendor) : 0xFFxx, xx + if ( rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP ) + { + switch (rpt_info->usage) + { + case HID_USAGE_DESKTOP_KEYBOARD: + TU_LOG1("HID receive keyboard report\r\n"); + // Assume keyboard follow boot report layout + process_kbd_report( (hid_keyboard_report_t const*) report ); + break; + + case HID_USAGE_DESKTOP_MOUSE: + TU_LOG1("HID receive mouse report\r\n"); + // Assume mouse follow boot report layout + process_mouse_report( (hid_mouse_report_t const*) report ); + break; + + default: break; + } + } +} diff --git a/tinyusb/examples/host/cdc_msc_hid/src/main.c b/tinyusb/examples/host/cdc_msc_hid/src/main.c new file mode 100755 index 00000000..a14be05e --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/src/main.c @@ -0,0 +1,128 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ +void led_blinking_task(void); + +extern void cdc_task(void); +extern void hid_app_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + printf("TinyUSB Host CDC MSC HID Example\r\n"); + + tusb_init(); + + while (1) + { + // tinyusb host task + tuh_task(); + led_blinking_task(); + +#if CFG_TUH_CDC + cdc_task(); +#endif + +#if CFG_TUH_HID + hid_app_task(); +#endif + } + + return 0; +} + +//--------------------------------------------------------------------+ +// USB CDC +//--------------------------------------------------------------------+ +#if CFG_TUH_CDC +CFG_TUSB_MEM_SECTION static char serial_in_buffer[64] = { 0 }; + +void tuh_mount_cb(uint8_t dev_addr) +{ + // application set-up + printf("A device with address %d is mounted\r\n", dev_addr); + + tuh_cdc_receive(dev_addr, serial_in_buffer, sizeof(serial_in_buffer), true); // schedule first transfer +} + +void tuh_umount_cb(uint8_t dev_addr) +{ + // application tear-down + printf("A device with address %d is unmounted \r\n", dev_addr); +} + +// invoked ISR context +void tuh_cdc_xfer_isr(uint8_t dev_addr, xfer_result_t event, cdc_pipeid_t pipe_id, uint32_t xferred_bytes) +{ + (void) event; + (void) pipe_id; + (void) xferred_bytes; + + printf(serial_in_buffer); + tu_memclr(serial_in_buffer, sizeof(serial_in_buffer)); + + tuh_cdc_receive(dev_addr, serial_in_buffer, sizeof(serial_in_buffer), true); // waiting for next data +} + +void cdc_task(void) +{ + +} + +#endif + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + const uint32_t interval_ms = 1000; + static uint32_t start_ms = 0; + + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < interval_ms) return; // not enough time + start_ms += interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/host/cdc_msc_hid/src/msc_app.c b/tinyusb/examples/host/cdc_msc_hid/src/msc_app.c new file mode 100755 index 00000000..77a72052 --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/src/msc_app.c @@ -0,0 +1,106 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +#if CFG_TUH_MSC + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +static scsi_inquiry_resp_t inquiry_resp; + +bool inquiry_complete_cb(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw) +{ + if (csw->status != 0) + { + printf("Inquiry failed\r\n"); + return false; + } + + // Print out Vendor ID, Product ID and Rev + printf("%.8s %.16s rev %.4s\r\n", inquiry_resp.vendor_id, inquiry_resp.product_id, inquiry_resp.product_rev); + + // Get capacity of device + uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); + uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); + + printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size)); + printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); + + return true; +} + +//------------- IMPLEMENTATION -------------// +void tuh_msc_mount_cb(uint8_t dev_addr) +{ + printf("A MassStorage device is mounted\r\n"); + + uint8_t const lun = 0; + tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb); +// +// //------------- file system (only 1 LUN support) -------------// +// uint8_t phy_disk = dev_addr-1; +// disk_initialize(phy_disk); +// +// if ( disk_is_ready(phy_disk) ) +// { +// if ( f_mount(phy_disk, &fatfs[phy_disk]) != FR_OK ) +// { +// puts("mount failed"); +// return; +// } +// +// f_chdrive(phy_disk); // change to newly mounted drive +// f_chdir("/"); // root as current dir +// +// cli_init(); +// } +} + +void tuh_msc_umount_cb(uint8_t dev_addr) +{ + (void) dev_addr; + printf("A MassStorage device is unmounted\r\n"); + +// uint8_t phy_disk = dev_addr-1; +// +// f_mount(phy_disk, NULL); // unmount disk +// disk_deinitialize(phy_disk); +// +// if ( phy_disk == f_get_current_drive() ) +// { // active drive is unplugged --> change to other drive +// for(uint8_t i=0; i<CFG_TUH_DEVICE_MAX; i++) +// { +// if ( disk_is_ready(i) ) +// { +// f_chdrive(i); +// cli_init(); // refractor, rename +// } +// } +// } +} + +#endif diff --git a/tinyusb/examples/host/cdc_msc_hid/src/tusb_config.h b/tinyusb/examples/host/cdc_msc_hid/src/tusb_config.h new file mode 100755 index 00000000..bc6c68e5 --- /dev/null +++ b/tinyusb/examples/host/cdc_msc_hid/src/tusb_config.h @@ -0,0 +1,94 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED) +#else + #define CFG_TUSB_RHPORT0_MODE OPT_MODE_HOST +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// CONFIGURATION +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#define CFG_TUH_HUB 1 +#define CFG_TUH_CDC 1 +#define CFG_TUH_HID 4 // typical keyboard + mouse device can have 3-4 HID interfaces +#define CFG_TUH_MSC 1 +#define CFG_TUH_VENDOR 0 + +// max device support (excluding hub device) +#define CFG_TUH_DEVICE_MAX (CFG_TUH_HUB ? 4 : 1) // hub typically has 4 ports + +//------------- HID -------------// +#define CFG_TUH_HID_EPIN_BUFSIZE 64 +#define CFG_TUH_HID_EPOUT_BUFSIZE 64 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_LPC175X_6X b/tinyusb/examples/host/hid_controller/.only.MCU_LPC175X_6X new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/hid_controller/.only.MCU_LPC175X_6X diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_LPC177X_8X b/tinyusb/examples/host/hid_controller/.only.MCU_LPC177X_8X new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/hid_controller/.only.MCU_LPC177X_8X diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_LPC18XX b/tinyusb/examples/host/hid_controller/.only.MCU_LPC18XX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/hid_controller/.only.MCU_LPC18XX diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_LPC40XX b/tinyusb/examples/host/hid_controller/.only.MCU_LPC40XX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/hid_controller/.only.MCU_LPC40XX diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_LPC43XX b/tinyusb/examples/host/hid_controller/.only.MCU_LPC43XX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/hid_controller/.only.MCU_LPC43XX diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_MIMXRT10XX b/tinyusb/examples/host/hid_controller/.only.MCU_MIMXRT10XX new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/hid_controller/.only.MCU_MIMXRT10XX diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_RP2040 b/tinyusb/examples/host/hid_controller/.only.MCU_RP2040 new file mode 100755 index 00000000..e69de29b --- /dev/null +++ b/tinyusb/examples/host/hid_controller/.only.MCU_RP2040 diff --git a/tinyusb/examples/host/hid_controller/CMakeLists.txt b/tinyusb/examples/host/hid_controller/CMakeLists.txt new file mode 100755 index 00000000..aaf8bc34 --- /dev/null +++ b/tinyusb/examples/host/hid_controller/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT})
\ No newline at end of file diff --git a/tinyusb/examples/host/hid_controller/Makefile b/tinyusb/examples/host/hid_controller/Makefile new file mode 100755 index 00000000..6f59faee --- /dev/null +++ b/tinyusb/examples/host/hid_controller/Makefile @@ -0,0 +1,30 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += \ + src/hid_app.c \ + src/main.c + +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +CFLAGS += -Wno-error=cast-align + +# TinyUSB Host Stack source +SRC_C += \ + src/class/cdc/cdc_host.c \ + src/class/hid/hid_host.c \ + src/class/msc/msc_host.c \ + src/host/hub.c \ + src/host/usbh.c \ + src/host/usbh_control.c \ + src/portable/ehci/ehci.c \ + src/portable/ohci/ohci.c \ + src/portable/nxp/transdimension/hcd_transdimension.c \ + src/portable/nxp/lpc17_40/hcd_lpc17_40.c + +include ../../rules.mk diff --git a/tinyusb/examples/host/hid_controller/src/hid_app.c b/tinyusb/examples/host/hid_controller/src/hid_app.c new file mode 100755 index 00000000..c61ce70f --- /dev/null +++ b/tinyusb/examples/host/hid_controller/src/hid_app.c @@ -0,0 +1,249 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board.h" +#include "tusb.h" + +/* From https://www.kernel.org/doc/html/latest/input/gamepad.html + ____________________________ __ + / [__ZL__] [__ZR__] \ | + / [__ TL __] [__ TR __] \ | Front Triggers + __/________________________________\__ __| + / _ \ | + / /\ __ (N) \ | + / || __ |MO| __ _ _ \ | Main Pad + | <===DP===> |SE| |ST| (W) -|- (E) | | + \ || ___ ___ _ / | + /\ \/ / \ / \ (S) /\ __| + / \________ | LS | ____ | RS | ________/ \ | +| / \ \___/ / \ \___/ / \ | | Control Sticks +| / \_____/ \_____/ \ | __| +| / \ | + \_____/ \_____/ + + |________|______| |______|___________| + D-Pad Left Right Action Pad + Stick Stick + + |_____________| + Menu Pad + + Most gamepads have the following features: + - Action-Pad 4 buttons in diamonds-shape (on the right side) NORTH, SOUTH, WEST and EAST. + - D-Pad (Direction-pad) 4 buttons (on the left side) that point up, down, left and right. + - Menu-Pad Different constellations, but most-times 2 buttons: SELECT - START. + - Analog-Sticks provide freely moveable sticks to control directions, Analog-sticks may also + provide a digital button if you press them. + - Triggers are located on the upper-side of the pad in vertical direction. The upper buttons + are normally named Left- and Right-Triggers, the lower buttons Z-Left and Z-Right. + - Rumble Many devices provide force-feedback features. But are mostly just simple rumble motors. + */ + +// Sony DS4 report layout detail https://www.psdevwiki.com/ps4/DS4-USB +typedef struct TU_ATTR_PACKED +{ + uint8_t x, y, z, rz; // joystick + + struct { + uint8_t dpad : 4; // (hat format, 0x08 is released, 0=N, 1=NE, 2=E, 3=SE, 4=S, 5=SW, 6=W, 7=NW) + uint8_t square : 1; // west + uint8_t cross : 1; // south + uint8_t circle : 1; // east + uint8_t triangle : 1; // north + }; + + struct { + uint8_t l1 : 1; + uint8_t r1 : 1; + uint8_t l2 : 1; + uint8_t r2 : 1; + uint8_t share : 1; + uint8_t option : 1; + uint8_t l3 : 1; + uint8_t r3 : 1; + }; + + struct { + uint8_t ps : 1; // playstation button + uint8_t tpad : 1; // track pad click + uint8_t counter : 6; // +1 each report + }; + + // comment out since not used by this example + // uint8_t l2_trigger; // 0 released, 0xff fully pressed + // uint8_t r2_trigger; // as above + + // uint16_t timestamp; + // uint8_t battery; + // + // int16_t gyro[3]; // x, y, z; + // int16_t accel[3]; // x, y, z + + // there is still lots more info + +} sony_ds4_report_t; + +// check if device is Sony DualShock 4 +static inline bool is_sony_ds4(uint8_t dev_addr) +{ + uint16_t vid, pid; + tuh_vid_pid_get(dev_addr, &vid, &pid); + + return (vid == 0x054c && pid == 0x09cc); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +void hid_app_task(void) +{ + // nothing to do +} + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +// Invoked when device with hid interface is mounted +// Report descriptor is also available for use. tuh_hid_parse_report_descriptor() +// can be used to parse common/simple enough descriptor. +// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped +// therefore report_desc = NULL, desc_len = 0 +void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len) +{ + uint16_t vid, pid; + tuh_vid_pid_get(dev_addr, &vid, &pid); + + printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance); + printf("VID = %04x, PID = %04x\r\n", vid, pid); + + // Sony DualShock 4 [CUH-ZCT2x] + if ( is_sony_ds4(dev_addr) ) + { + // request to receive report + // tuh_hid_report_received_cb() will be invoked when report is available + if ( !tuh_hid_receive_report(dev_addr, instance) ) + { + printf("Error: cannot request to receive report\r\n"); + } + } +} + +// Invoked when device with hid interface is un-mounted +void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) +{ + printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance); + +} + +// check if different than 2 +bool diff_than_2(uint8_t x, uint8_t y) +{ + return (x - y > 2) || (y - x > 2); +} + +// check if 2 reports are different enough +bool diff_report(sony_ds4_report_t const* rpt1, sony_ds4_report_t const* rpt2) +{ + bool result; + + // x, y, z, rz must different than 2 to be counted + result = diff_than_2(rpt1->x, rpt2->x) || diff_than_2(rpt1->y , rpt2->y ) || + diff_than_2(rpt1->z, rpt2->z) || diff_than_2(rpt1->rz, rpt2->rz); + + // check the reset with mem compare + result |= memcmp(&rpt1->rz + 1, &rpt2->rz + 1, sizeof(sony_ds4_report_t)-4); + + return result; +} + +void process_sony_ds4(uint8_t const* report, uint16_t len) +{ + const char* dpad_str[] = { "N", "NE", "E", "SE", "S", "SW", "W", "NW", "none" }; + + // previous report used to compare for changes + static sony_ds4_report_t prev_report = { 0 }; + + uint8_t const report_id = report[0]; + report++; + len--; + + // all buttons state is stored in ID 1 + if (report_id == 1) + { + sony_ds4_report_t ds4_report; + memcpy(&ds4_report, report, sizeof(ds4_report)); + + // counter is +1, assign to make it easier to compare 2 report + prev_report.counter = ds4_report.counter; + + // only print if changes since it is polled ~ 5ms + // Since count+1 after each report and x, y, z, rz fluctuate within 1 or 2 + // We need more than memcmp to check if report is different enough + if ( diff_report(&prev_report, &ds4_report) ) + { + printf("(x, y, z, rz) = (%u, %u, %u, %u)\r\n", ds4_report.x, ds4_report.y, ds4_report.z, ds4_report.rz); + printf("DPad = %s ", dpad_str[ds4_report.dpad]); + + if (ds4_report.square ) printf("Square "); + if (ds4_report.cross ) printf("Cross "); + if (ds4_report.circle ) printf("Circle "); + if (ds4_report.triangle ) printf("Triangle "); + + if (ds4_report.l1 ) printf("L1 "); + if (ds4_report.r1 ) printf("R1 "); + if (ds4_report.l2 ) printf("L2 "); + if (ds4_report.r2 ) printf("R2 "); + + if (ds4_report.share ) printf("Share "); + if (ds4_report.option ) printf("Option "); + if (ds4_report.l3 ) printf("L3 "); + if (ds4_report.r3 ) printf("R3 "); + + if (ds4_report.ps ) printf("PS "); + if (ds4_report.tpad ) printf("TPad "); + + printf("\r\n"); + } + + prev_report = ds4_report; + } +} + +// Invoked when received report from device via interrupt endpoint +void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) +{ + if ( is_sony_ds4(dev_addr) ) + { + process_sony_ds4(report, len); + } + + // continue to request to receive report + if ( !tuh_hid_receive_report(dev_addr, instance) ) + { + printf("Error: cannot request to receive report\r\n"); + } +} diff --git a/tinyusb/examples/host/hid_controller/src/main.c b/tinyusb/examples/host/hid_controller/src/main.c new file mode 100755 index 00000000..e13fa818 --- /dev/null +++ b/tinyusb/examples/host/hid_controller/src/main.c @@ -0,0 +1,93 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* This example current worked and tested with following controller + * - Sony DualShock 4 [CUH-ZCT2x] VID = 0x054c, PID = 0x09cc + */ + + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ +void led_blinking_task(void); + +extern void cdc_task(void); +extern void hid_app_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + printf("TinyUSB Host HID Controller Example\r\n"); + + tusb_init(); + + while (1) + { + // tinyusb host task + tuh_task(); + led_blinking_task(); + +#if CFG_TUH_CDC + cdc_task(); +#endif + +#if CFG_TUH_HID + hid_app_task(); +#endif + } + + return 0; +} + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + const uint32_t interval_ms = 1000; + static uint32_t start_ms = 0; + + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < interval_ms) return; // not enough time + start_ms += interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/tinyusb/examples/host/hid_controller/src/tusb_config.h b/tinyusb/examples/host/hid_controller/src/tusb_config.h new file mode 100755 index 00000000..74b471ae --- /dev/null +++ b/tinyusb/examples/host/hid_controller/src/tusb_config.h @@ -0,0 +1,95 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED) +#else + #define CFG_TUSB_RHPORT0_MODE OPT_MODE_HOST +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// CONFIGURATION +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#define CFG_TUH_HUB 0 +#define CFG_TUH_CDC 0 +#define CFG_TUH_HID 4 // typical keyboard + mouse device can have 3-4 HID interfaces +#define CFG_TUH_MSC 0 +#define CFG_TUH_VENDOR 0 + +// max device support (excluding hub device) +// 1 hub typically has 4 ports +#define CFG_TUH_DEVICE_MAX (CFG_TUH_HUB ? 4 : 1) + +//------------- HID -------------// + +#define CFG_TUH_HID_EP_BUFSIZE 64 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/tinyusb/examples/make.mk b/tinyusb/examples/make.mk new file mode 100755 index 00000000..9daf60e3 --- /dev/null +++ b/tinyusb/examples/make.mk @@ -0,0 +1,132 @@ +# --------------------------------------- +# Common make definition for all examples +# --------------------------------------- + +# Build directory +BUILD := _build/$(BOARD) + +PROJECT := $(notdir $(CURDIR)) +BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR)) + +# Handy check parameter function +check_defined = \ + $(strip $(foreach 1,$1, \ + $(call __check_defined,$1,$(strip $(value 2))))) +__check_defined = \ + $(if $(value $1),, \ + $(error Undefined make flag: $1$(if $2, ($2)))) + +#-------------- Select the board to build for. ------------ + +# Board without family +ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),) +BOARD_PATH := hw/bsp/$(BOARD) +FAMILY := +endif + +# Board within family +ifeq ($(BOARD_PATH),) + BOARD_PATH := $(subst $(TOP)/,,$(wildcard $(TOP)/hw/bsp/*/boards/$(BOARD))) + FAMILY := $(word 3, $(subst /, ,$(BOARD_PATH))) + FAMILY_PATH = hw/bsp/$(FAMILY) +endif + +ifeq ($(BOARD_PATH),) + $(info You must provide a BOARD parameter with 'BOARD=') + $(error Invalid BOARD specified) +endif + +ifeq ($(FAMILY),) + include $(TOP)/hw/bsp/$(BOARD)/board.mk +else + # Include Family and Board specific defs + include $(TOP)/$(FAMILY_PATH)/family.mk + + SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) +endif + +# Fetch submodules depended by family +fetch_submodule_if_empty = $(if $(wildcard $(TOP)/$1/*),,$(info $(shell git -C $(TOP) submodule update --init $1))) +ifdef DEPS_SUBMODULES + $(foreach s,$(DEPS_SUBMODULES),$(call fetch_submodule_if_empty,$(s))) +endif + +#-------------- Cross Compiler ------------ +# Can be set by board, default to ARM GCC +CROSS_COMPILE ?= arm-none-eabi- + +CC = $(CROSS_COMPILE)gcc +CXX = $(CROSS_COMPILE)g++ +GDB = $(CROSS_COMPILE)gdb +OBJCOPY = $(CROSS_COMPILE)objcopy +SIZE = $(CROSS_COMPILE)size +MKDIR = mkdir + +ifeq ($(CMDEXE),1) + CP = copy + RM = del +else + SED = sed + CP = cp + RM = rm +endif + +#-------------- Source files and compiler flags -------------- + +# Include all source C in family & board folder +SRC_C += hw/bsp/board.c +SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(BOARD_PATH)/*.c)) + +INC += $(TOP)/$(FAMILY_PATH) + +# Compiler Flags +CFLAGS += \ + -ggdb \ + -fdata-sections \ + -ffunction-sections \ + -fsingle-precision-constant \ + -fno-strict-aliasing \ + -Wdouble-promotion \ + -Wstrict-prototypes \ + -Wstrict-overflow \ + -Wall \ + -Wextra \ + -Werror \ + -Wfatal-errors \ + -Werror-implicit-function-declaration \ + -Wfloat-equal \ + -Wundef \ + -Wshadow \ + -Wwrite-strings \ + -Wsign-compare \ + -Wmissing-format-attribute \ + -Wunreachable-code \ + -Wcast-align \ + -Wcast-function-type + +# Debugging/Optimization +ifeq ($(DEBUG), 1) + CFLAGS += -Og +else + CFLAGS += -Os +endif + +# Log level is mapped to TUSB DEBUG option +ifneq ($(LOG),) + CMAKE_DEFSYM += -DLOG=$(LOG) + CFLAGS += -DCFG_TUSB_DEBUG=$(LOG) +endif + +# Logger: default is uart, can be set to rtt or swo +ifneq ($(LOGGER),) + CMAKE_DEFSYM += -DLOGGER=$(LOGGER) +endif + +ifeq ($(LOGGER),rtt) + CFLAGS += -DLOGGER_RTT -DSEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL + RTT_SRC = lib/SEGGER_RTT + INC += $(TOP)/$(RTT_SRC)/RTT + SRC_C += $(RTT_SRC)/RTT/SEGGER_RTT.c +else ifeq ($(LOGGER),swo) + CFLAGS += -DLOGGER_SWO +endif diff --git a/tinyusb/examples/rules.mk b/tinyusb/examples/rules.mk new file mode 100755 index 00000000..4fce468f --- /dev/null +++ b/tinyusb/examples/rules.mk @@ -0,0 +1,204 @@ +# --------------------------------------- +# Common make rules for all examples +# --------------------------------------- + +# Set all as default goal +.DEFAULT_GOAL := all + +# ESP32-SX and RP2040 has its own CMake build system +ifneq ($(FAMILY),esp32s2) +ifneq ($(FAMILY),esp32s3) +ifneq ($(FAMILY),rp2040) +# --------------------------------------- +# GNU Make build system +# --------------------------------------- + +# libc +LIBS += -lgcc -lm -lnosys + +ifneq ($(BOARD), spresense) +LIBS += -lc +endif + +# TinyUSB Stack source +SRC_C += \ + src/tusb.c \ + src/common/tusb_fifo.c \ + src/device/usbd.c \ + src/device/usbd_control.c \ + src/class/audio/audio_device.c \ + src/class/cdc/cdc_device.c \ + src/class/dfu/dfu_device.c \ + src/class/dfu/dfu_rt_device.c \ + src/class/hid/hid_device.c \ + src/class/midi/midi_device.c \ + src/class/msc/msc_device.c \ + src/class/net/net_device.c \ + src/class/usbtmc/usbtmc_device.c \ + src/class/vendor/vendor_device.c + +# TinyUSB stack include +INC += $(TOP)/src + +CFLAGS += $(addprefix -I,$(INC)) + +LDFLAGS += $(CFLAGS) -Wl,-T,$(TOP)/$(LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections +ifneq ($(SKIP_NANOLIB), 1) +LDFLAGS += -specs=nosys.specs -specs=nano.specs +endif + +ASFLAGS += $(CFLAGS) + +# Assembly files can be name with upper case .S, convert it to .s +SRC_S := $(SRC_S:.S=.s) + +# Due to GCC LTO bug https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966 +# assembly file should be placed first in linking order +# '_asm' suffix is added to object of assembly file +OBJ += $(addprefix $(BUILD)/obj/, $(SRC_S:.s=_asm.o)) +OBJ += $(addprefix $(BUILD)/obj/, $(SRC_C:.c=.o)) + +# Verbose mode +ifeq ("$(V)","1") +$(info CFLAGS $(CFLAGS) ) $(info ) +$(info LDFLAGS $(LDFLAGS)) $(info ) +$(info ASFLAGS $(ASFLAGS)) $(info ) +endif + +all: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex size + +uf2: $(BUILD)/$(PROJECT).uf2 + +OBJ_DIRS = $(sort $(dir $(OBJ))) +$(OBJ): | $(OBJ_DIRS) +$(OBJ_DIRS): +ifeq ($(CMDEXE),1) + @$(MKDIR) $(subst /,\,$@) +else + @$(MKDIR) -p $@ +endif + +$(BUILD)/$(PROJECT).elf: $(OBJ) + @echo LINK $@ + @$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group + +$(BUILD)/$(PROJECT).bin: $(BUILD)/$(PROJECT).elf + @echo CREATE $@ + @$(OBJCOPY) -O binary $^ $@ + +$(BUILD)/$(PROJECT).hex: $(BUILD)/$(PROJECT).elf + @echo CREATE $@ + @$(OBJCOPY) -O ihex $^ $@ + +# UF2 generation, iMXRT need to strip to text only before conversion +ifeq ($(FAMILY),imxrt) +$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).elf + @echo CREATE $@ + @$(OBJCOPY) -O ihex -R .flash_config -R .ivt $^ $(BUILD)/$(PROJECT)-textonly.hex + $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -c -o $@ $(BUILD)/$(PROJECT)-textonly.hex +else +$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).hex + @echo CREATE $@ + $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -c -o $@ $^ +endif + +copy-artifact: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex $(BUILD)/$(PROJECT).uf2 + +# We set vpath to point to the top of the tree so that the source files +# can be located. By following this scheme, it allows a single build rule +# to be used to compile all .c files. +vpath %.c . $(TOP) +$(BUILD)/obj/%.o: %.c + @echo CC $(notdir $@) + @$(CC) $(CFLAGS) -c -MD -o $@ $< + +# ASM sources lower case .s +vpath %.s . $(TOP) +$(BUILD)/obj/%_asm.o: %.s + @echo AS $(notdir $@) + @$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< + +# ASM sources upper case .S +vpath %.S . $(TOP) +$(BUILD)/obj/%_asm.o: %.S + @echo AS $(notdir $@) + @$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< + +size: $(BUILD)/$(PROJECT).elf + -@echo '' + @$(SIZE) $< + -@echo '' + +.PHONY: clean +clean: +ifeq ($(CMDEXE),1) + rd /S /Q $(subst /,\,$(BUILD)) +else + $(RM) -rf $(BUILD) +endif + +endif +endif +endif # GNU Make + +# --------------------------------------- +# Flash Targets +# --------------------------------------- + +# Flash binary using Jlink +ifeq ($(OS),Windows_NT) + JLINKEXE = JLink.exe +else + JLINKEXE = JLinkExe +endif + +JLINK_IF ?= swd + +# Flash using jlink +flash-jlink: $(BUILD)/$(PROJECT).hex + @echo halt > $(BUILD)/$(BOARD).jlink + @echo r > $(BUILD)/$(BOARD).jlink + @echo loadfile $^ >> $(BUILD)/$(BOARD).jlink + @echo r >> $(BUILD)/$(BOARD).jlink + @echo go >> $(BUILD)/$(BOARD).jlink + @echo exit >> $(BUILD)/$(BOARD).jlink + $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink + +# flash STM32 MCU using stlink with STM32 Cube Programmer CLI +flash-stlink: $(BUILD)/$(PROJECT).elf + STM32_Programmer_CLI --connect port=swd --write $< --go + +# flash with pyocd +flash-pyocd: $(BUILD)/$(PROJECT).hex + pyocd flash -t $(PYOCD_TARGET) $< + pyocd reset -t $(PYOCD_TARGET) + +# flash with Black Magic Probe + +# This symlink is created by https://github.com/blacksphere/blackmagic/blob/master/driver/99-blackmagic.rules +BMP ?= /dev/ttyBmpGdb + +flash-bmp: $(BUILD)/$(PROJECT).elf + $(GDB) --batch -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' -ex load $< + +debug-bmp: $(BUILD)/$(PROJECT).elf + $(GDB) -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' $< + +#-------------- Artifacts -------------- + +# Create binary directory +$(BIN): + @$(MKDIR) -p $@ + +# Copy binaries .elf, .bin, .hex, .uf2 to BIN for upload +# due to large size of combined artifacts, only uf2 is uploaded for now +copy-artifact: $(BIN) + @$(CP) $(BUILD)/$(PROJECT).uf2 $(BIN) + #@$(CP) $(BUILD)/$(PROJECT).bin $(BIN) + #@$(CP) $(BUILD)/$(PROJECT).hex $(BIN) + #@$(CP) $(BUILD)/$(PROJECT).elf $(BIN) + +# Print out the value of a make variable. +# https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile +print-%: + @echo $* = $($*) |