summaryrefslogtreecommitdiffstats
path: root/tinyusb/hw/bsp/da1469x_dk_pro/board.mk
diff options
context:
space:
mode:
Diffstat (limited to 'tinyusb/hw/bsp/da1469x_dk_pro/board.mk')
-rwxr-xr-xtinyusb/hw/bsp/da1469x_dk_pro/board.mk55
1 files changed, 0 insertions, 55 deletions
diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/board.mk b/tinyusb/hw/bsp/da1469x_dk_pro/board.mk
deleted file mode 100755
index 980fc422..00000000
--- a/tinyusb/hw/bsp/da1469x_dk_pro/board.mk
+++ /dev/null
@@ -1,55 +0,0 @@
-CFLAGS += \
- -flto \
- -mthumb \
- -mthumb-interwork \
- -mabi=aapcs \
- -mcpu=cortex-m33+nodsp \
- -mfloat-abi=hard \
- -mfpu=fpv5-sp-d16 \
- -nostdlib \
- -DCORE_M33 \
- -DCFG_TUSB_MCU=OPT_MCU_DA1469X \
- -DCFG_TUD_ENDPOINT0_SIZE=8\
-
-MCU_FAMILY_DIR = hw/mcu/dialog/da1469x
-
-# All source paths should be relative to the top level.
-LD_FILE = hw/bsp/$(BOARD)/da1469x.ld
-
-# While this is for da1469x chip, there is chance that da1468x chip family will also work
-SRC_C += \
- src/portable/dialog/da146xx/dcd_da146xx.c \
- $(MCU_FAMILY_DIR)/src/system_da1469x.c \
- $(MCU_FAMILY_DIR)/src/da1469x_clock.c \
- $(MCU_FAMILY_DIR)/src/hal_gpio.c \
-
-SRC_S += hw/bsp/$(BOARD)/gcc_startup_da1469x.S
-
-INC += \
- $(TOP)/hw/bsp/$(BOARD) \
- $(TOP)/$(MCU_FAMILY_DIR)/include \
- $(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include
-
-# For freeRTOS port source
-FREERTOS_PORT = ARM_CM33_NTZ/non_secure
-
-# For flash-jlink target
-JLINK_DEVICE = DA14699
-
-# flash using jlink but with some twists
-flash: flash-dialog
-
-flash-dialog: $(BUILD)/$(PROJECT).bin
- @echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h
- @echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >>$(BUILD)/version.h
- mkimage da1469x $(BUILD)/$(PROJECT).bin $(BUILD)/version.h $^.img
- cp $(TOP)/hw/bsp/$(BOARD)/product_header.dump $(BUILD)/$(BOARD)-image.bin
- cat $^.img >> $(BUILD)/$(BOARD)-image.bin
- @echo r > $(BUILD)/$(BOARD).jlink
- @echo halt >> $(BUILD)/$(BOARD).jlink
- @echo loadfile $(BUILD)/$(BOARD)-image.bin 0x16000000 >> $(BUILD)/$(BOARD).jlink
- @echo r >> $(BUILD)/$(BOARD).jlink
- @echo go >> $(BUILD)/$(BOARD).jlink
- @echo exit >> $(BUILD)/$(BOARD).jlink
- $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink
-