1 files changed, 0 insertions, 148 deletions
diff --git a/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c b/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c
deleted file mode 100755
index 7d3a173e..00000000
--- a/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2018, hathach (tinyusb.org)
- * Copyright (c) 2020, Koji Kitayama
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include "../board.h"
-#include "fsl_device_registers.h"
-#include "fsl_gpio.h"
-#include "fsl_port.h"
-#include "fsl_clock.h"
-#include "fsl_lpsci.h"
-
-#include "clock_config.h"
-
-//--------------------------------------------------------------------+
-// Forward USB interrupt events to TinyUSB IRQ Handler
-//--------------------------------------------------------------------+
-void USB0_IRQHandler(void)
-{
-  tud_int_handler(0);
-}
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-// LED
-#define LED_PINMUX            IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
-#define LED_PORT              GPIOB
-#define LED_PIN_CLOCK         kCLOCK_PortB
-#define LED_PIN_PORT          PORTB
-#define LED_PIN               19U
-#define LED_PIN_FUNCTION      kPORT_MuxAsGpio
-#define LED_STATE_ON          0
-
-// UART
-#define UART_PORT             UART0
-#define UART_PIN_CLOCK        kCLOCK_PortA
-#define UART_PIN_PORT         PORTA
-#define UART_PIN_RX           1u
-#define UART_PIN_TX           2u
-#define UART_PIN_FUNCTION     kPORT_MuxAlt2
-#define SOPT5_UART0RXSRC_UART_RX      0x00u   /*!< UART0 receive data source select: UART0_RX pin */
-#define SOPT5_UART0TXSRC_UART_TX      0x00u   /*!< UART0 transmit data source select: UART0_TX pin */
-
-const uint8_t dcd_data[] = { 0x00 };
-
-void board_init(void)
-{
-  BOARD_BootClockRUN();
-  SystemCoreClockUpdate();
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-  // 1ms tick timer
-  SysTick_Config(SystemCoreClock / 1000);
-#elif CFG_TUSB_OS == OPT_OS_FREERTOS
-  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-  NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
-#endif
-
-  // LED
-  CLOCK_EnableClock(LED_PIN_CLOCK);
-  PORT_SetPinMux(LED_PIN_PORT, LED_PIN, LED_PIN_FUNCTION);
-  gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 };
-  GPIO_PinInit(LED_PORT, LED_PIN, &led_config);
-  board_led_write(true);
-
-  // UART
-  CLOCK_EnableClock(UART_PIN_CLOCK);
-  PORT_SetPinMux(UART_PIN_PORT, UART_PIN_RX, UART_PIN_FUNCTION);
-  PORT_SetPinMux(UART_PIN_PORT, UART_PIN_TX, UART_PIN_FUNCTION);
-  SIM->SOPT5 = ((SIM->SOPT5 &
-    (~(SIM_SOPT5_UART0TXSRC_MASK | SIM_SOPT5_UART0RXSRC_MASK)))
-      | SIM_SOPT5_UART0TXSRC(SOPT5_UART0TXSRC_UART_TX)
-      | SIM_SOPT5_UART0RXSRC(SOPT5_UART0RXSRC_UART_RX)
-    );
-
-  lpsci_config_t uart_config;
-  CLOCK_SetLpsci0Clock(1);
-  LPSCI_GetDefaultConfig(&uart_config);
-  uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
-  uart_config.enableTx = true;
-  uart_config.enableRx = true;
-  LPSCI_Init(UART_PORT, &uart_config, CLOCK_GetPllFllSelClkFreq());
-
-  // USB
-  CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcPll0, CLOCK_GetFreq(kCLOCK_PllFllSelClk));
-}
-
-//--------------------------------------------------------------------+
-// Board porting API
-//--------------------------------------------------------------------+
-
-void board_led_write(bool state)
-{
-  GPIO_WritePinOutput(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
-}
-
-uint32_t board_button_read(void)
-{
-  return 0;
-}
-
-int board_uart_read(uint8_t* buf, int len)
-{
-  LPSCI_ReadBlocking(UART_PORT, buf, len);
-  return len;
-}
-
-int board_uart_write(void const * buf, int len)
-{
-  LPSCI_WriteBlocking(UART_PORT, (uint8_t*)buf, len);
-  return len;
-}
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-void SysTick_Handler(void)
-{
-  system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-  return system_ticks;
-}
-#endif