diff options
Diffstat (limited to 'tinyusb/hw/bsp/frdm_kl25z')
m--------- | tinyusb | 0 | ||||
-rwxr-xr-x | tinyusb/hw/bsp/frdm_kl25z/board.mk | 46 | ||||
-rwxr-xr-x | tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c | 148 |
3 files changed, 0 insertions, 194 deletions
diff --git a/tinyusb b/tinyusb new file mode 160000 +Subproject f8288be03f28ad7b944e6925f49422dfa39202c diff --git a/tinyusb/hw/bsp/frdm_kl25z/board.mk b/tinyusb/hw/bsp/frdm_kl25z/board.mk deleted file mode 100755 index 451bc37c..00000000 --- a/tinyusb/hw/bsp/frdm_kl25z/board.mk +++ /dev/null @@ -1,46 +0,0 @@ -SDK_DIR = hw/mcu/nxp/nxp_sdk -DEPS_SUBMODULES += $(SDK_DIR) - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -DCPU_MKL25Z128VLK4 \ - -DCFG_TUSB_MCU=OPT_MCU_MKL25ZXX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -MCU_DIR = $(SDK_DIR)/devices/MKL25Z4 - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/MKL25Z128xxx4_flash.ld - -SRC_C += \ - src/portable/nxp/khci/dcd_khci.c \ - $(MCU_DIR)/system_MKL25Z4.c \ - $(MCU_DIR)/project_template/clock_config.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_gpio.c \ - $(MCU_DIR)/drivers/fsl_lpsci.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(SDK_DIR)/CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(MCU_DIR)/project_template \ - -SRC_S += $(MCU_DIR)/gcc/startup_MKL25Z4.S - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = MKL25Z128xxx4 - -# For flash-pyocd target -PYOCD_TARGET = mkl25zl128 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c b/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c deleted file mode 100755 index 7d3a173e..00000000 --- a/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * Copyright (c) 2020, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "fsl_device_registers.h" -#include "fsl_gpio.h" -#include "fsl_port.h" -#include "fsl_clock.h" -#include "fsl_lpsci.h" - -#include "clock_config.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PORT GPIOB -#define LED_PIN_CLOCK kCLOCK_PortB -#define LED_PIN_PORT PORTB -#define LED_PIN 19U -#define LED_PIN_FUNCTION kPORT_MuxAsGpio -#define LED_STATE_ON 0 - -// UART -#define UART_PORT UART0 -#define UART_PIN_CLOCK kCLOCK_PortA -#define UART_PIN_PORT PORTA -#define UART_PIN_RX 1u -#define UART_PIN_TX 2u -#define UART_PIN_FUNCTION kPORT_MuxAlt2 -#define SOPT5_UART0RXSRC_UART_RX 0x00u /*!< UART0 receive data source select: UART0_RX pin */ -#define SOPT5_UART0TXSRC_UART_TX 0x00u /*!< UART0 transmit data source select: UART0_TX pin */ - -const uint8_t dcd_data[] = { 0x00 }; - -void board_init(void) -{ - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - // LED - CLOCK_EnableClock(LED_PIN_CLOCK); - PORT_SetPinMux(LED_PIN_PORT, LED_PIN, LED_PIN_FUNCTION); - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; - GPIO_PinInit(LED_PORT, LED_PIN, &led_config); - board_led_write(true); - - // UART - CLOCK_EnableClock(UART_PIN_CLOCK); - PORT_SetPinMux(UART_PIN_PORT, UART_PIN_RX, UART_PIN_FUNCTION); - PORT_SetPinMux(UART_PIN_PORT, UART_PIN_TX, UART_PIN_FUNCTION); - SIM->SOPT5 = ((SIM->SOPT5 & - (~(SIM_SOPT5_UART0TXSRC_MASK | SIM_SOPT5_UART0RXSRC_MASK))) - | SIM_SOPT5_UART0TXSRC(SOPT5_UART0TXSRC_UART_TX) - | SIM_SOPT5_UART0RXSRC(SOPT5_UART0RXSRC_UART_RX) - ); - - lpsci_config_t uart_config; - CLOCK_SetLpsci0Clock(1); - LPSCI_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - LPSCI_Init(UART_PORT, &uart_config, CLOCK_GetPllFllSelClkFreq()); - - // USB - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcPll0, CLOCK_GetFreq(kCLOCK_PllFllSelClk)); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_WritePinOutput(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - LPSCI_ReadBlocking(UART_PORT, buf, len); - return len; -} - -int board_uart_write(void const * buf, int len) -{ - LPSCI_WriteBlocking(UART_PORT, (uint8_t*)buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif |