2 files changed, 0 insertions, 159 deletions
diff --git a/tinyusb b/tinyusb
new file mode 160000
+Subproject f8288be03f28ad7b944e6925f49422dfa39202c
diff --git a/tinyusb/hw/bsp/lpc18/family.c b/tinyusb/hw/bsp/lpc18/family.c
deleted file mode 100755
index d74ebcd3..00000000
--- a/tinyusb/hw/bsp/lpc18/family.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include "chip.h"
-#include "bsp/board.h"
-#include "board.h"
-
-//--------------------------------------------------------------------+
-// USB Interrupt Handler
-//--------------------------------------------------------------------+
-void USB0_IRQHandler(void)
-{
-  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
-    tuh_int_handler(0);
-  #endif
-
-  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
-    tud_int_handler(0);
-  #endif
-}
-
-void USB1_IRQHandler(void)
-{
-  #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
-    tuh_int_handler(1);
-  #endif
-
-  #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
-    tud_int_handler(1);
-  #endif
-}
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-
-
-/* System configuration variables used by chip driver */
-const uint32_t OscRateIn = 12000000;
-const uint32_t ExtRateIn = 0;
-
-// Invoked by startup code
-void SystemInit(void)
-{
-#ifdef __USE_LPCOPEN
-	extern void (* const g_pfnVectors[])(void);
-  unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08;
-	*pSCB_VTOR = (unsigned int) g_pfnVectors;
-#endif
-
-  board_lpc18_pinmux();
-  Chip_SetupXtalClocking();
-}
-
-void board_init(void)
-{
-  SystemCoreClockUpdate();
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-  // 1ms tick timer
-  SysTick_Config(SystemCoreClock / 1000);
-#elif CFG_TUSB_OS == OPT_OS_FREERTOS
-  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-  //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
-#endif
-
-  Chip_GPIO_Init(LPC_GPIO_PORT);
-
-  // LED
-  Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN);
-
-  // Button
-  Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN);
-
-  //------------- UART -------------//
-  Chip_UART_Init(UART_DEV);
-  Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE);
-  Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS);
-  Chip_UART_TXEnable(UART_DEV);
-
-  //------------- USB -------------//
-#if CFG_TUSB_RHPORT0_MODE
-  Chip_USB0_Init();
-#endif
-
-#if CFG_TUSB_RHPORT1_MODE
-  Chip_USB1_Init();
-#endif
-}
-
-//--------------------------------------------------------------------+
-// Board porting API
-//--------------------------------------------------------------------+
-
-void board_led_write(bool state)
-{
-  Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state);
-}
-
-uint32_t board_button_read(void)
-{
-  // active low
-  return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1;
-}
-
-int board_uart_read(uint8_t* buf, int len)
-{
-  //return UART_ReceiveByte(BOARD_UART_PORT);
-  (void) buf; (void) len;
-  return 0;
-}
-
-int board_uart_write(void const * buf, int len)
-{
-  uint8_t const* buf8 = (uint8_t const*) buf;
-  for(int i=0; i<len; i++)
-  {
-    while ((Chip_UART_ReadLineStatus(UART_DEV) & UART_LSR_THRE) == 0) {}
-    Chip_UART_SendByte(UART_DEV, buf8[i]);
-  }
-
-  return len;
-}
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-void SysTick_Handler (void)
-{
-  system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-  return system_ticks;
-}
-#endif