diff options
Diffstat (limited to 'tinyusb/hw/bsp/lpc18')
-rwxr-xr-x | tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h | 77 | ||||
-rwxr-xr-x | tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk | 6 | ||||
-rwxr-xr-x | tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld | 404 | ||||
-rwxr-xr-x | tinyusb/hw/bsp/lpc18/boards/mcb1800/board.h | 94 | ||||
-rwxr-xr-x | tinyusb/hw/bsp/lpc18/boards/mcb1800/board.mk | 7 | ||||
-rwxr-xr-x | tinyusb/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld | 323 | ||||
-rwxr-xr-x | tinyusb/hw/bsp/lpc18/family.c | 159 | ||||
-rwxr-xr-x | tinyusb/hw/bsp/lpc18/family.mk | 35 |
8 files changed, 0 insertions, 1105 deletions
diff --git a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h deleted file mode 100755 index b3a7bc44..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -// Note: For USB Host demo, install JP4 -// WARNING: don't install JP4 when running as device - -#ifdef __cplusplus - extern "C" { -#endif - -// LED Red -#define LED_PORT 3 -#define LED_PIN 7 - -// ISP Button -#define BUTTON_PORT 0 -#define BUTTON_PIN 7 - -#define UART_DEV LPC_USART0 - -static inline void board_lpc18_pinmux(void) -{ - const PINMUX_GRP_T pinmuxing[] = - { - // LEDs - { 0x6, 9 , SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC0 }, - { 0x6, 11, SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC0 }, - - // Button - { 0x2, 7, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0 }, - - // UART - { 0x06, 4, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, - { 0x02, 1, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1 }, - - // USB0 - //{ 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function - - //{ 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function - //{ 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION - {0x2, 5, SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC4 }, - }; - - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); -} - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk deleted file mode 100755 index 29b12913..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk +++ /dev/null @@ -1,6 +0,0 @@ -LD_FILE = $(BOARD_PATH)/lpc1837.ld - -# For flash-jlink target -JLINK_DEVICE = LPC18S37 - -flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld deleted file mode 100755 index 51fd1539..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld +++ /dev/null @@ -1,404 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * Copyright (c) 2008-2013 Code Red Technologies Ltd, - * Copyright 2015, 2018-2019 NXP - * (c) NXP Semiconductors 2013-2021 - * Generated linker script file for LPC1837 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v11.2.0 [Build 4120] [2020-07-09] on Mar 3, 2021 4:22:49 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ -} - -/* Define a symbol for the top of each memory region */ -__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ -__base_Flash = 0x1a000000 ; /* Flash */ -__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ -__base_Flash2 = 0x1b000000 ; /* Flash2 */ -__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ -__base_RAM = 0x10000000 ; /* RAM */ -__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ -__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ -__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ -__base_RAM2 = 0x10080000 ; /* RAM2 */ -__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ -__base_RAM3 = 0x20000000 ; /* RAM3 */ -__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ -__base_RAM4 = 0x20008000 ; /* RAM4 */ -__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ -__base_RAM5 = 0x2000c000 ; /* RAM5 */ -__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ -__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - .text_Flash2 : ALIGN(4) - { - FILL(0xff) - *(.text_Flash2) /* for compatibility with previous releases */ - *(.text_MFlashB512) /* for compatibility with previous releases */ - *(.text.$Flash2) - *(.text.$MFlashB512) - *(.text_Flash2.*) /* for compatibility with previous releases */ - *(.text_MFlashB512.*) /* for compatibility with previous releases */ - *(.text.$Flash2.*) - *(.text.$MFlashB512.*) - *(.rodata.$Flash2) - *(.rodata.$MFlashB512) - *(.rodata.$Flash2.*) - *(.rodata.$MFlashB512.*) } > MFlashB512 - - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlashA512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlashA512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlashA512 - - .ARM.exidx : ALIGN(4) - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > MFlashA512 - - _etext = .; - - /* DATA section for RamLoc40 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - PROVIDE(__start_data_RamLoc40 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc40) - *(.data.$RAM2) - *(.data.$RamLoc40) - *(.data.$RAM2.*) - *(.data.$RamLoc40.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - PROVIDE(__end_data_RamLoc40 = .) ; - } > RamLoc40 AT>MFlashA512 - - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - PROVIDE(__start_data_RamAHB32 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3) - *(.data.$RamAHB32) - *(.data.$RAM3.*) - *(.data.$RamAHB32.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - PROVIDE(__end_data_RamAHB32 = .) ; - } > RamAHB32 AT>MFlashA512 - - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - PROVIDE(__start_data_RamAHB16 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4) - *(.data.$RamAHB16) - *(.data.$RAM4.*) - *(.data.$RamAHB16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - PROVIDE(__end_data_RamAHB16 = .) ; - } > RamAHB16 AT>MFlashA512 - - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - PROVIDE(__start_data_RamAHB_ETB16 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5) - *(.data.$RamAHB_ETB16) - *(.data.$RAM5.*) - *(.data.$RamAHB_ETB16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - PROVIDE(__end_data_RamAHB_ETB16 = .) ; - } > RamAHB_ETB16 AT>MFlashA512 - - /* MAIN DATA SECTION */ - .uninit_RESERVED (NOLOAD) : ALIGN(4) - { - _start_uninit_RESERVED = .; - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 AT> RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - PROVIDE(__start_data_RAM = .) ; - PROVIDE(__start_data_RamLoc32 = .) ; - *(vtable) - *(.ramfunc*) - KEEP(*(CodeQuickAccess)) - KEEP(*(DataQuickAccess)) - *(RamFunction) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - PROVIDE(__end_data_RAM = .) ; - PROVIDE(__end_data_RamLoc32 = .) ; - } > RamLoc32 AT>MFlashA512 - - /* BSS section for RamLoc40 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - PROVIDE(__start_bss_RamLoc40 = .) ; - *(.bss.$RAM2) - *(.bss.$RamLoc40) - *(.bss.$RAM2.*) - *(.bss.$RamLoc40.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - PROVIDE(__end_bss_RamLoc40 = .) ; - } > RamLoc40 AT> RamLoc40 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - PROVIDE(__start_bss_RamAHB32 = .) ; - *(.bss.$RAM3) - *(.bss.$RamAHB32) - *(.bss.$RAM3.*) - *(.bss.$RamAHB32.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - PROVIDE(__end_bss_RamAHB32 = .) ; - } > RamAHB32 AT> RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : ALIGN(4) - { - PROVIDE(__start_bss_RAM4 = .) ; - PROVIDE(__start_bss_RamAHB16 = .) ; - *(.bss.$RAM4) - *(.bss.$RamAHB16) - *(.bss.$RAM4.*) - *(.bss.$RamAHB16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - PROVIDE(__end_bss_RamAHB16 = .) ; - } > RamAHB16 AT> RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : ALIGN(4) - { - PROVIDE(__start_bss_RAM5 = .) ; - PROVIDE(__start_bss_RamAHB_ETB16 = .) ; - *(.bss.$RAM5) - *(.bss.$RamAHB_ETB16) - *(.bss.$RAM5.*) - *(.bss.$RamAHB_ETB16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - PROVIDE(__end_bss_RamAHB_ETB16 = .) ; - } > RamAHB_ETB16 AT> RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - PROVIDE(__start_bss_RAM = .) ; - PROVIDE(__start_bss_RamLoc32 = .) ; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(__end_bss_RAM = .) ; - PROVIDE(__end_bss_RamLoc32 = .) ; - PROVIDE(end = .); - } > RamLoc32 AT> RamLoc32 - - /* NOINIT section for RamLoc40 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - PROVIDE(__start_noinit_RAM2 = .) ; - PROVIDE(__start_noinit_RamLoc40 = .) ; - *(.noinit.$RAM2) - *(.noinit.$RamLoc40) - *(.noinit.$RAM2.*) - *(.noinit.$RamLoc40.*) - . = ALIGN(4) ; - PROVIDE(__end_noinit_RAM2 = .) ; - PROVIDE(__end_noinit_RamLoc40 = .) ; - } > RamLoc40 AT> RamLoc40 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - PROVIDE(__start_noinit_RAM3 = .) ; - PROVIDE(__start_noinit_RamAHB32 = .) ; - *(.noinit.$RAM3) - *(.noinit.$RamAHB32) - *(.noinit.$RAM3.*) - *(.noinit.$RamAHB32.*) - . = ALIGN(4) ; - PROVIDE(__end_noinit_RAM3 = .) ; - PROVIDE(__end_noinit_RamAHB32 = .) ; - } > RamAHB32 AT> RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : ALIGN(4) - { - PROVIDE(__start_noinit_RAM4 = .) ; - PROVIDE(__start_noinit_RamAHB16 = .) ; - *(.noinit.$RAM4) - *(.noinit.$RamAHB16) - *(.noinit.$RAM4.*) - *(.noinit.$RamAHB16.*) - . = ALIGN(4) ; - PROVIDE(__end_noinit_RAM4 = .) ; - PROVIDE(__end_noinit_RamAHB16 = .) ; - } > RamAHB16 AT> RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : ALIGN(4) - { - PROVIDE(__start_noinit_RAM5 = .) ; - PROVIDE(__start_noinit_RamAHB_ETB16 = .) ; - *(.noinit.$RAM5) - *(.noinit.$RamAHB_ETB16) - *(.noinit.$RAM5.*) - *(.noinit.$RamAHB_ETB16.*) - . = ALIGN(4) ; - PROVIDE(__end_noinit_RAM5 = .) ; - PROVIDE(__end_noinit_RamAHB_ETB16 = .) ; - } > RamAHB_ETB16 AT> RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - PROVIDE(__start_noinit_RAM = .) ; - PROVIDE(__start_noinit_RamLoc32 = .) ; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - PROVIDE(__end_noinit_RAM = .) ; - PROVIDE(__end_noinit_RamLoc32 = .) ; - } > RamLoc32 AT> RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.h b/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.h deleted file mode 100755 index 6111da97..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// PD_10 -#define LED_PORT 6 -#define LED_PIN 24 - -// P4_0 -#define BUTTON_PORT 2 -#define BUTTON_PIN 0 - -#define UART_DEV LPC_USART3 - -static inline void board_lpc18_pinmux(void) -{ - const PINMUX_GRP_T pinmuxing[] = - { - // LEDs - { 0xD, 10, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4) }, - { 0xD, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 12, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 13, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 14, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0x9, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - { 0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - { 0x9, 2, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - - // Button - { 0x4, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP) }, - - // UART - { 2, 3, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, - { 2, 4, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, - - // USB0 - { 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function - - { 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function - { 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION - }; - - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - /* Pin clock mux values, re-used structure, value in first index is meaningless */ - const PINMUX_GRP_T pinclockmuxing[] = - { - { 0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - }; - - /* Clock pins only, group field not used */ - for (uint32_t i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) - { - Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); - } -} - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.mk b/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.mk deleted file mode 100755 index 0307a21d..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.mk +++ /dev/null @@ -1,7 +0,0 @@ -LD_FILE = $(BOARD_PATH)/lpc1857.ld - -# For flash-jlink target -JLINK_DEVICE = LPC1857 - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/tinyusb/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld deleted file mode 100755 index 9a308e34..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld +++ /dev/null @@ -1,323 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1857 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 15, 2019 1:01:52 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ -} - -/* Define a symbol for the top of each memory region */ -__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ -__base_Flash = 0x1a000000 ; /* Flash */ -__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ -__base_Flash2 = 0x1b000000 ; /* Flash2 */ -__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ -__base_RAM = 0x10000000 ; /* RAM */ -__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ -__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ -__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ -__base_RAM2 = 0x10080000 ; /* RAM2 */ -__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ -__base_RAM3 = 0x20000000 ; /* RAM3 */ -__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ -__base_RAM4 = 0x20008000 ; /* RAM4 */ -__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ -__base_RAM5 = 0x2000c000 ; /* RAM5 */ -__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ -__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - .text_Flash2 : ALIGN(4) - { - FILL(0xff) - *(.text_Flash2*) /* for compatibility with previous releases */ - *(.text_MFlashB512*) /* for compatibility with previous releases */ - *(.text.$Flash2*) - *(.text.$MFlashB512*) - *(.rodata.$Flash2*) - *(.rodata.$MFlashB512*) - } > MFlashB512 - - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlashA512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlashA512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlashA512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlashA512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamLoc40 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc40) - *(.data.$RAM2*) - *(.data.$RamLoc40*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamLoc40 AT>MFlashA512 - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamAHB32 AT>MFlashA512 - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4*) - *(.data.$RamAHB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - } > RamAHB16 AT>MFlashA512 - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5*) - *(.data.$RamAHB_ETB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - } > RamAHB_ETB16 AT>MFlashA512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlashA512 - - /* BSS section for RamLoc40 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamLoc40*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : ALIGN(4) - { - PROVIDE(__start_bss_RAM4 = .) ; - *(.bss.$RAM4*) - *(.bss.$RamAHB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : ALIGN(4) - { - PROVIDE(__start_bss_RAM5 = .) ; - *(.bss.$RAM5*) - *(.bss.$RamAHB_ETB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamLoc40 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamLoc40*) - . = ALIGN(4) ; - } > RamLoc40 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM3*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM4*) - *(.noinit.$RamAHB16*) - . = ALIGN(4) ; - } > RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM5*) - *(.noinit.$RamAHB_ETB16*) - . = ALIGN(4) ; - } > RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpc18/family.c b/tinyusb/hw/bsp/lpc18/family.c deleted file mode 100755 index d74ebcd3..00000000 --- a/tinyusb/hw/bsp/lpc18/family.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "bsp/board.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -void USB1_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); - #endif - - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); - #endif -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - - -/* System configuration variables used by chip driver */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; -#endif - - board_lpc18_pinmux(); - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - - //------------- UART -------------// - Chip_UART_Init(UART_DEV); - Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); - Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); - Chip_UART_TXEnable(UART_DEV); - - //------------- USB -------------// -#if CFG_TUSB_RHPORT0_MODE - Chip_USB0_Init(); -#endif - -#if CFG_TUSB_RHPORT1_MODE - Chip_USB1_Init(); -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - //return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - uint8_t const* buf8 = (uint8_t const*) buf; - for(int i=0; i<len; i++) - { - while ((Chip_UART_ReadLineStatus(UART_DEV) & UART_LSR_THRE) == 0) {} - Chip_UART_SendByte(UART_DEV, buf8[i]); - } - - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/lpc18/family.mk b/tinyusb/hw/bsp/lpc18/family.mk deleted file mode 100755 index 3fed0b45..00000000 --- a/tinyusb/hw/bsp/lpc18/family.mk +++ /dev/null @@ -1,35 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC18XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx - -SRC_C += \ - src/portable/nxp/transdimension/dcd_transdimension.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc18xx.c \ - $(MCU_DIR)/src/chip_18xx_43xx.c \ - $(MCU_DIR)/src/clock_18xx_43xx.c \ - $(MCU_DIR)/src/gpio_18xx_43xx.c \ - $(MCU_DIR)/src/sysinit_18xx_43xx.c \ - $(MCU_DIR)/src/uart_18xx_43xx.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MCU_DIR)/inc \ - $(TOP)/$(MCU_DIR)/inc/config_18xx - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM3 |