diff options
Diffstat (limited to 'tinyusb/hw/bsp/lpc54/boards')
4 files changed, 149 insertions, 0 deletions
diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.h b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.h new file mode 100755 index 00000000..b1ad4258 --- /dev/null +++ b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT 0 +#define LED_PIN 29 +#define LED_STATE_ON 0 + +// WAKE button +#define BUTTON_PORT 0 +#define BUTTON_PIN 24 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART0 +#define UART_RX_PINMUX 0, 0, IOCON_PIO_DIG_FUNC1_EN +#define UART_TX_PINMUX 0, 1, IOCON_PIO_DIG_FUNC1_EN + +// USB0 VBUS +#define USB0_VBUS_PINMUX 1, 6, IOCON_PIO_DIG_FUNC7_EN + +// XTAL +//#define XTAL0_CLK_HZ (16 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.mk b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.mk new file mode 100755 index 00000000..6e33d8cb --- /dev/null +++ b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.mk @@ -0,0 +1,13 @@ +MCU_VARIANT = LPC54114 +MCU_CORE = LPC54114_cm4 + +CFLAGS += -DCPU_LPC54114J256BD64_cm4 +LD_FILE = $(MCU_DIR)/gcc/LPC54114J256_cm4_flash.ld + +LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_cm4_hardabi.a + +JLINK_DEVICE = LPC54114J256_M4 +PYOCD_TARGET = LPC54114 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.h b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.h new file mode 100755 index 00000000..67027751 --- /dev/null +++ b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT 2 +#define LED_PIN 2 +#define LED_STATE_ON 0 + +// WAKE button +#define BUTTON_PORT 1 +#define BUTTON_PIN 1 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART0 +#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN +#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN + +// USB0 VBUS +#define USB0_VBUS_PINMUX 0, 22, IOCON_PIO_DIG_FUNC7_EN + +// XTAL +//#define XTAL0_CLK_HZ (16 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk new file mode 100755 index 00000000..925374cc --- /dev/null +++ b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk @@ -0,0 +1,18 @@ +MCU_VARIANT = LPC54628 +MCU_CORE = LPC54628 + +PORT ?= 0 + +CFLAGS += -DCPU_LPC54628J512ET180 +CFLAGS += -Wno-error=double-promotion + +LD_FILE = $(MCU_DIR)/gcc/LPC54628J512_flash.ld + +LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a + +JLINK_DEVICE = LPC54628J512 +PYOCD_TARGET = LPC54628 + +#flash: flash-pyocd + +flash: flash-jlink
\ No newline at end of file |