1 files changed, 0 insertions, 135 deletions
diff --git a/tinyusb/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c b/tinyusb/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c
deleted file mode 100755
index e33a5c6e..00000000
--- a/tinyusb/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include "chip.h"
-#include "../board.h"
-
-//--------------------------------------------------------------------+
-// Forward USB interrupt events to TinyUSB IRQ Handler
-//--------------------------------------------------------------------+
-void USB_IRQHandler(void)
-{
-  tud_int_handler(0);
-}
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM
-//--------------------------------------------------------------------+
-#define LED_PORT              2
-#define LED_PIN               17
-#define LED_STATE_ON          0
-
-// Wake up Switch
-#define BUTTON_PORT           0
-#define BUTTON_PIN            16
-#define BUTTON_STATE_ACTIVE   0
-
-/* System oscillator rate and RTC oscillator rate */
-const uint32_t OscRateIn = 12000000;
-const uint32_t RTCOscRateIn = 32768;
-
-/* Pin muxing table, only items that need changing from their default pin
-   state are in this table. Not every pin is mapped. */
-static const PINMUX_GRP_T pinmuxing[] =
-{
-  {0, 3,  (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS
-  {0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX
-  {0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX
-  {2, 0,  (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALIN
-  {2, 1,  (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALOUT
-};
-
-// Invoked by startup code
-void SystemInit(void)
-{
-  /* Enable IOCON clock */
-  Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON);
-  Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
-  Chip_SetupXtalClocking();
-}
-
-void board_init(void)
-{
-  SystemCoreClockUpdate();
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-  // 1ms tick timer
-  SysTick_Config(SystemCoreClock / 1000);
-#elif CFG_TUSB_OS == OPT_OS_FREERTOS
-  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-  NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
-#endif
-
-  Chip_GPIO_Init(LPC_GPIO);
-
-  // LED
-  Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN);
-
-  // Button
-  Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
-
-  // USB: Setup PLL clock, and power
-  Chip_USB_Init();
-}
-
-//--------------------------------------------------------------------+
-// Board porting API
-//--------------------------------------------------------------------+
-
-void board_led_write(bool state)
-{
-  Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
-}
-
-uint32_t board_button_read(void)
-{
-  return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
-}
-
-int board_uart_read(uint8_t* buf, int len)
-{
-  (void) buf; (void) len;
-  return 0;
-}
-
-int board_uart_write(void const * buf, int len)
-{
-  (void) buf; (void) len;
-  return 0;
-}
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-void SysTick_Handler (void)
-{
-  system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-  return system_ticks;
-}
-#endif