diff options
Diffstat (limited to 'tinyusb/hw/bsp/nrf/family.c')
| -rwxr-xr-x | tinyusb/hw/bsp/nrf/family.c | 224 |
1 files changed, 0 insertions, 224 deletions
diff --git a/tinyusb/hw/bsp/nrf/family.c b/tinyusb/hw/bsp/nrf/family.c deleted file mode 100755 index ed742daa..00000000 --- a/tinyusb/hw/bsp/nrf/family.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "board.h" - -#include "nrfx.h" -#include "nrfx/hal/nrf_gpio.h" -#include "nrfx/drivers/include/nrfx_power.h" -#include "nrfx/drivers/include/nrfx_uarte.h" - -#ifdef SOFTDEVICE_PRESENT -#include "nrf_sdm.h" -#include "nrf_soc.h" -#endif - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -/*------------------------------------------------------------------*/ -/* MACRO TYPEDEF CONSTANT ENUM - *------------------------------------------------------------------*/ - -static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0); - -// tinyusb function that handles power event (detected, ready, removed) -// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. -extern void tusb_hal_nrf_power_event(uint32_t event); - - -// nrf power callback, could be unused if SD is enabled or usb is disabled (board_test example) -TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event) -{ - tusb_hal_nrf_power_event((uint32_t) event); -} - -void board_init(void) -{ - // stop LF clock just in case we jump from application without reset - NRF_CLOCK->TASKS_LFCLKSTOP = 1UL; - - // Use Internal OSC to compatible with all boards - NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_RC; - NRF_CLOCK->TASKS_LFCLKSTART = 1UL; - - // LED - nrf_gpio_cfg_output(LED_PIN); - board_led_write(false); - - // Button - nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); - - // 1ms tick timer - SysTick_Config(SystemCoreClock/1000); - - // UART - nrfx_uarte_config_t uart_cfg = - { - .pseltxd = UART_TX_PIN, - .pselrxd = UART_RX_PIN, - .pselcts = NRF_UARTE_PSEL_DISCONNECTED, - .pselrts = NRF_UARTE_PSEL_DISCONNECTED, - .p_context = NULL, - .baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE - .interrupt_priority = 7, - .hal_cfg = { - .hwfc = NRF_UARTE_HWFC_DISABLED, - .parity = NRF_UARTE_PARITY_EXCLUDED, - } - }; - - nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler); - - //------------- USB -------------// -#if TUSB_OPT_DEVICE_ENABLED - // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice - // 2 is highest for application - NVIC_SetPriority(USBD_IRQn, 2); - - // USB power may already be ready at this time -> no event generated - // We need to invoke the handler based on the status initially - uint32_t usb_reg; - -#ifdef SOFTDEVICE_PRESENT - uint8_t sd_en = false; - sd_softdevice_is_enabled(&sd_en); - - if ( sd_en ) { - sd_power_usbdetected_enable(true); - sd_power_usbpwrrdy_enable(true); - sd_power_usbremoved_enable(true); - - sd_power_usbregstatus_get(&usb_reg); - }else -#endif - { - // Power module init - const nrfx_power_config_t pwr_cfg = { 0 }; - nrfx_power_init(&pwr_cfg); - - // Register tusb function as USB power handler - // cause cast-function-type warning - const nrfx_power_usbevt_config_t config = { .handler = power_event_handler }; - nrfx_power_usbevt_init(&config); - - nrfx_power_usbevt_enable(); - - usb_reg = NRF_POWER->USBREGSTATUS; - } - - if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED); - if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY); -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -// return NRFX_SUCCESS == nrfx_uart_rx(&_uart_id, buf, (size_t) len) ? len : 0; -} - -int board_uart_write(void const * buf, int len) -{ - return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -#ifdef SOFTDEVICE_PRESENT -// process SOC event from SD -uint32_t proc_soc(void) -{ - uint32_t soc_evt; - uint32_t err = sd_evt_get(&soc_evt); - - if (NRF_SUCCESS == err) - { - /*------------- usb power event handler -------------*/ - int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED ) ? NRFX_POWER_USB_EVT_DETECTED: - (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY : - (soc_evt == NRF_EVT_POWER_USB_REMOVED ) ? NRFX_POWER_USB_EVT_REMOVED : -1; - - if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt); - } - - return err; -} - -uint32_t proc_ble(void) -{ - // do nothing with ble - return NRF_ERROR_NOT_FOUND; -} - -void SD_EVT_IRQHandler(void) -{ - // process BLE and SOC until there is no more events - while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) ) - { - - } -} - -void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) -{ - (void) id; - (void) pc; - (void) info; -} -#endif |