1 files changed, 59 insertions, 0 deletions
diff --git a/tinyusb/hw/bsp/nutiny_nuc126v/board.mk b/tinyusb/hw/bsp/nutiny_nuc126v/board.mk
new file mode 100755
index 00000000..848b19f9
--- /dev/null
+++ b/tinyusb/hw/bsp/nutiny_nuc126v/board.mk
@@ -0,0 +1,59 @@
+DEPS_SUBMODULES += hw/mcu/nuvoton
+
+CFLAGS += \
+  -flto \
+  -mthumb \
+  -mabi=aapcs-linux \
+  -mcpu=cortex-m0 \
+  -D__ARM_FEATURE_DSP=0 \
+  -DUSE_ASSERT=0 \
+  -D__CORTEX_SC=0 \
+  -DCFG_TUSB_MCU=OPT_MCU_NUC126
+
+# All source paths should be relative to the top level.
+LD_FILE = hw/bsp/$(BOARD)/nuc126_flash.ld
+
+SRC_C += \
+  src/portable/nuvoton/nuc121/dcd_nuc121.c \
+  hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Source/system_NUC126.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/acmp.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/adc.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/clk.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/crc.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/ebi.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/fmc.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/gpio.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/pdma.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/pwm.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/rtc.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/sc.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/scuart.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/spi.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/sys.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/timer.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/timer_pwm.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/uart.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/usbd.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/usci_spi.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/usci_uart.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/wdt.c \
+  hw/mcu/nuvoton/nuc126/StdDriver/src/wwdt.c
+
+SRC_S += \
+  hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Source/GCC/startup_NUC126.S
+
+INC += \
+  $(TOP)/hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Include \
+  $(TOP)/hw/mcu/nuvoton/nuc126/StdDriver/inc \
+  $(TOP)/hw/mcu/nuvoton/nuc126/CMSIS/Include
+
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM0
+
+# For flash-jlink target
+JLINK_DEVICE = NUC126VG4AE
+
+# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
+# Please compile and install it from github source
+flash: $(BUILD)/$(PROJECT).elf
+	openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit"