1 files changed, 150 insertions, 0 deletions
diff --git a/tinyusb/hw/bsp/samd11/family.c b/tinyusb/hw/bsp/samd11/family.c
new file mode 100755
index 00000000..8d963397
--- /dev/null
+++ b/tinyusb/hw/bsp/samd11/family.c
@@ -0,0 +1,150 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "sam.h"
+#include "bsp/board.h"
+#include "board.h"
+
+#include "hal/include/hal_gpio.h"
+#include "hal/include/hal_init.h"
+#include "hri/hri_nvmctrl_d11.h"
+
+#include "hpl/gclk/hpl_gclk_base.h"
+#include "hpl_pm_config.h"
+#include "hpl/pm/hpl_pm_base.h"
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void USB_Handler(void)
+{
+  tud_int_handler(0);
+}
+
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+
+/* Referenced GCLKs, should be initialized firstly */
+#define _GCLK_INIT_1ST (1 << 0 | 1 << 1)
+
+/* Not referenced GCLKs, initialized last */
+#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST)
+
+void board_init(void)
+{
+  // Clock init ( follow hpl_init.c )
+  hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, 2);
+
+  _pm_init();
+  _sysctrl_init_sources();
+#if _GCLK_INIT_1ST
+  _gclk_init_generators_by_fref(_GCLK_INIT_1ST);
+#endif
+  _sysctrl_init_referenced_generators();
+  _gclk_init_generators_by_fref(_GCLK_INIT_LAST);
+
+  // 1ms tick timer (samd SystemCoreClock may not correct)
+  SystemCoreClock = CONF_CPU_FREQUENCY;
+  SysTick_Config(CONF_CPU_FREQUENCY / 1000);
+
+  // Led init
+  gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
+  gpio_set_pin_level(LED_PIN, 0);
+
+  // Button init
+  gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
+  gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
+
+  /* USB Clock init
+   * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock
+   * for low speed and full speed operation. */
+  _pm_enable_bus_clock(PM_BUS_APBB, USB);
+  _pm_enable_bus_clock(PM_BUS_AHB, USB);
+  _gclk_enable_channel(USB_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val);
+
+  // USB Pin Init
+  gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT);
+  gpio_set_pin_level(PIN_PA24, false);
+  gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF);
+  gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT);
+  gpio_set_pin_level(PIN_PA25, false);
+  gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF);
+
+  gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM);
+  gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP);
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_led_write(bool state)
+{
+  gpio_set_pin_level(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
+}
+
+uint32_t board_button_read(void)
+{
+  return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN);
+}
+
+int board_uart_read(uint8_t* buf, int len)
+{
+  (void) buf; (void) len;
+  return 0;
+}
+
+int board_uart_write(void const * buf, int len)
+{
+  (void) buf; (void) len;
+  return 0;
+}
+
+#if CFG_TUSB_OS  == OPT_OS_NONE
+
+volatile uint32_t system_ticks = 0;
+
+void SysTick_Handler (void)
+{
+  system_ticks++;
+}
+
+uint32_t board_millis(void)
+{
+  return system_ticks;
+}
+
+void _init(void)
+{
+  // This _init() standin makes certain GCC environments happier.
+  // They expect the main binary to have a constructor called _init; but don't provide a weak default.
+  // Providing an empty constructor satisfies this odd case, and doesn't harm anything.
+}
+
+
+#endif