diff options
Diffstat (limited to 'tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h')
| -rwxr-xr-x | tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h b/tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h new file mode 100755 index 00000000..50ca3f15 --- /dev/null +++ b/tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h @@ -0,0 +1,215 @@ +/* Auto-generated config file hpl_usart_config.h */ +#ifndef HPL_USART_CONFIG_H +#define HPL_USART_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include <peripheral_clk_config.h> + +#ifndef CONF_USART_1_ENABLE +#define CONF_USART_1_ENABLE 1 +#endif + +// <h> Basic Configuration + +// <o> Frame parity +// <0x0=>Even parity +// <0x1=>Odd parity +// <0x2=>Parity forced to 0 +// <0x3=>Parity forced to 1 +// <0x4=>No parity +// <i> Parity bit mode for USART frame +// <id> usart_parity +#ifndef CONF_USART_1_PARITY +#define CONF_USART_1_PARITY 0x4 +#endif + +// <o> Character Size +// <0x0=>5 bits +// <0x1=>6 bits +// <0x2=>7 bits +// <0x3=>8 bits +// <i> Data character size in USART frame +// <id> usart_character_size +#ifndef CONF_USART_1_CHSIZE +#define CONF_USART_1_CHSIZE 0x3 +#endif + +// <o> Stop Bit +// <0=>1 stop bit +// <1=>1.5 stop bits +// <2=>2 stop bits +// <i> Number of stop bits in USART frame +// <id> usart_stop_bit +#ifndef CONF_USART_1_SBMODE +#define CONF_USART_1_SBMODE 0 +#endif + +// <o> Clock Output Select +// <0=>The USART does not drive the SCK pin +// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK +// <i> Clock Output Select in USART sck, if in usrt master mode, please drive SCK. +// <id> usart_clock_output_select +#ifndef CONF_USART_1_CLKO +#define CONF_USART_1_CLKO 0 +#endif + +// <o> Baud rate <1-3000000> +// <i> USART baud rate setting +// <id> usart_baud_rate +#ifndef CONF_USART_1_BAUD +#define CONF_USART_1_BAUD 9600 +#endif + +// </h> + +// <e> Advanced configuration +// <id> usart_advanced +#ifndef CONF_USART_1_ADVANCED_CONFIG +#define CONF_USART_1_ADVANCED_CONFIG 0 +#endif + +// <o> Channel Mode +// <0=>Normal Mode +// <1=>Automatic Echo +// <2=>Local Loopback +// <3=>Remote Loopback +// <i> Channel mode in USART frame +// <id> usart_channel_mode +#ifndef CONF_USART_1_CHMODE +#define CONF_USART_1_CHMODE 0 +#endif + +// <q> 9 bits character enable +// <i> Enable 9 bits character, this has high priority than 5/6/7/8 bits. +// <id> usart_9bits_enable +#ifndef CONF_USART_1_MODE9 +#define CONF_USART_1_MODE9 0 +#endif + +// <o> Variable Sync +// <0=>User defined configuration +// <1=>sync field is updated when a character is written into US_THR +// <i> Variable Synchronization of Command/Data Sync Start Frarm Delimiter +// <id> variable_sync +#ifndef CONF_USART_1_VAR_SYNC +#define CONF_USART_1_VAR_SYNC 0 +#endif + +// <o> Oversampling Mode +// <0=>16 Oversampling +// <1=>8 Oversampling +// <i> Oversampling Mode in UART mode +// <id> usart__oversampling_mode +#ifndef CONF_USART_1_OVER +#define CONF_USART_1_OVER 0 +#endif + +// <o> Inhibit Non Ack +// <0=>The NACK is generated +// <1=>The NACK is not generated +// <i> Inhibit Non Acknowledge +// <id> usart__inack +#ifndef CONF_USART_1_INACK +#define CONF_USART_1_INACK 1 +#endif + +// <o> Disable Successive NACK +// <0=>NACK is sent on the ISO line as soon as a parity error occurs +// <1=>Many parity errors generate a NACK on the ISO line +// <i> Disable Successive NACK +// <id> usart_dsnack +#ifndef CONF_USART_1_DSNACK +#define CONF_USART_1_DSNACK 0 +#endif + +// <o> Inverted Data +// <0=>Data isn't inverted, nomal mode +// <1=>Data is inverted +// <i> Inverted Data +// <id> usart_invdata +#ifndef CONF_USART_1_INVDATA +#define CONF_USART_1_INVDATA 0 +#endif + +// <o> Maximum Number of Automatic Iteration <0-7> +// <i> Defines the maximum number of iterations in mode ISO7816, protocol T = 0. +// <id> usart_max_iteration +#ifndef CONF_USART_1_MAX_ITERATION +#define CONF_USART_1_MAX_ITERATION 0 +#endif + +// <q> Receive Line Filter enable +// <i> whether the USART filters the receive line using a three-sample filter +// <id> usart_receive_filter_enable +#ifndef CONF_USART_1_FILTER +#define CONF_USART_1_FILTER 0 +#endif + +// <q> Manchester Encoder/Decoder Enable +// <i> whether the USART Manchester Encoder/Decoder +// <id> usart_manchester_filter_enable +#ifndef CONF_USART_1_MAN +#define CONF_USART_1_MAN 0 +#endif + +// <o> Manchester Synchronization Mode +// <0=>The Manchester start bit is a 0 to 1 transition +// <1=>The Manchester start bit is a 1 to 0 transition +// <i> Manchester Synchronization Mode +// <id> usart_manchester_synchronization_mode +#ifndef CONF_USART_1_MODSYNC +#define CONF_USART_1_MODSYNC 0 +#endif + +// <o> Start Frame Delimiter Selector +// <0=>Start frame delimiter is COMMAND or DATA SYNC +// <1=>Start frame delimiter is one bit +// <i> Start Frame Delimiter Selector +// <id> usart_start_frame_delimiter +#ifndef CONF_USART_1_ONEBIT +#define CONF_USART_1_ONEBIT 0 +#endif + +// <o> Fractional Part <0-7> +// <i> Fractional part of the baud rate if baud rate generator is in fractional mode +// <id> usart_arch_fractional +#ifndef CONF_USART_1_FRACTIONAL +#define CONF_USART_1_FRACTIONAL 0x0 +#endif + +// <o> Data Order +// <0=>LSB is transmitted first +// <1=>MSB is transmitted first +// <i> Data order of the data bits in the frame +// <id> usart_arch_msbf +#ifndef CONF_USART_1_MSBF +#define CONF_USART_1_MSBF 0 +#endif + +// </e> + +#define CONF_USART_1_MODE 0x0 + +// Calculate BAUD register value in UART mode +#if CONF_USART1_CK_SRC < 3 +#ifndef CONF_USART_1_BAUD_CD +#define CONF_USART_1_BAUD_CD ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / 8 / (2 - CONF_USART_1_OVER)) +#endif +#ifndef CONF_USART_1_BAUD_FP +#define CONF_USART_1_BAUD_FP \ + ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / (2 - CONF_USART_1_OVER) - 8 * CONF_USART_1_BAUD_CD) +#endif +#elif CONF_USART1_CK_SRC == 3 +// No division is active. The value written in US_BRGR has no effect. +#ifndef CONF_USART_1_BAUD_CD +#define CONF_USART_1_BAUD_CD 1 +#endif +#ifndef CONF_USART_1_BAUD_FP +#define CONF_USART_1_BAUD_FP 1 +#endif +#endif + +// <<< end of configuration section >>> + +#endif // HPL_USART_CONFIG_H |