diff options
Diffstat (limited to 'tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h')
-rwxr-xr-x | tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h | 215 |
1 files changed, 0 insertions, 215 deletions
diff --git a/tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h b/tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h deleted file mode 100755 index 4f2837d2..00000000 --- a/tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h +++ /dev/null @@ -1,215 +0,0 @@ -/* Auto-generated config file hpl_usart_config.h */ -#ifndef HPL_USART_CONFIG_H -#define HPL_USART_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -#include <peripheral_clk_config.h> - -#ifndef CONF_USART_7_ENABLE -#define CONF_USART_7_ENABLE 1 -#endif - -// <h> Basic Configuration - -// <o> Frame parity -// <0x0=>Even parity -// <0x1=>Odd parity -// <0x2=>Parity forced to 0 -// <0x3=>Parity forced to 1 -// <0x4=>No parity -// <i> Parity bit mode for USART frame -// <id> usart_parity -#ifndef CONF_USART_7_PARITY -#define CONF_USART_7_PARITY 0x4 -#endif - -// <o> Character Size -// <0x0=>5 bits -// <0x1=>6 bits -// <0x2=>7 bits -// <0x3=>8 bits -// <i> Data character size in USART frame -// <id> usart_character_size -#ifndef CONF_USART_7_CHSIZE -#define CONF_USART_7_CHSIZE 0x3 -#endif - -// <o> Stop Bit -// <0=>1 stop bit -// <1=>1.5 stop bits -// <2=>2 stop bits -// <i> Number of stop bits in USART frame -// <id> usart_stop_bit -#ifndef CONF_USART_7_SBMODE -#define CONF_USART_7_SBMODE 0 -#endif - -// <o> Clock Output Select -// <0=>The USART does not drive the SCK pin -// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK -// <i> Clock Output Select in USART sck, if in usrt master mode, please drive SCK. -// <id> usart_clock_output_select -#ifndef CONF_USART_7_CLKO -#define CONF_USART_7_CLKO 0 -#endif - -// <o> Baud rate <1-3000000> -// <i> USART baud rate setting -// <id> usart_baud_rate -#ifndef CONF_USART_7_BAUD -#define CONF_USART_7_BAUD 9600 -#endif - -// </h> - -// <e> Advanced configuration -// <id> usart_advanced -#ifndef CONF_USART_7_ADVANCED_CONFIG -#define CONF_USART_7_ADVANCED_CONFIG 0 -#endif - -// <o> Channel Mode -// <0=>Normal Mode -// <1=>Automatic Echo -// <2=>Local Loopback -// <3=>Remote Loopback -// <i> Channel mode in USART frame -// <id> usart_channel_mode -#ifndef CONF_USART_7_CHMODE -#define CONF_USART_7_CHMODE 0 -#endif - -// <q> 9 bits character enable -// <i> Enable 9 bits character, this has high priority than 5/6/7/8 bits. -// <id> usart_9bits_enable -#ifndef CONF_USART_7_MODE9 -#define CONF_USART_7_MODE9 0 -#endif - -// <o> Variable Sync -// <0=>User defined configuration -// <1=>sync field is updated when a character is written into US_THR -// <i> Variable Synchronization of Command/Data Sync Start Frarm Delimiter -// <id> variable_sync -#ifndef CONF_USART_7_VAR_SYNC -#define CONF_USART_7_VAR_SYNC 0 -#endif - -// <o> Oversampling Mode -// <0=>16 Oversampling -// <1=>8 Oversampling -// <i> Oversampling Mode in UART mode -// <id> usart__oversampling_mode -#ifndef CONF_USART_7_OVER -#define CONF_USART_7_OVER 0 -#endif - -// <o> Inhibit Non Ack -// <0=>The NACK is generated -// <1=>The NACK is not generated -// <i> Inhibit Non Acknowledge -// <id> usart__inack -#ifndef CONF_USART_7_INACK -#define CONF_USART_7_INACK 1 -#endif - -// <o> Disable Successive NACK -// <0=>NACK is sent on the ISO line as soon as a parity error occurs -// <1=>Many parity errors generate a NACK on the ISO line -// <i> Disable Successive NACK -// <id> usart_dsnack -#ifndef CONF_USART_7_DSNACK -#define CONF_USART_7_DSNACK 0 -#endif - -// <o> Inverted Data -// <0=>Data isn't inverted, nomal mode -// <1=>Data is inverted -// <i> Inverted Data -// <id> usart_invdata -#ifndef CONF_USART_7_INVDATA -#define CONF_USART_7_INVDATA 0 -#endif - -// <o> Maximum Number of Automatic Iteration <0-7> -// <i> Defines the maximum number of iterations in mode ISO7816, protocol T = 0. -// <id> usart_max_iteration -#ifndef CONF_USART_7_MAX_ITERATION -#define CONF_USART_7_MAX_ITERATION 0 -#endif - -// <q> Receive Line Filter enable -// <i> whether the USART filters the receive line using a three-sample filter -// <id> usart_receive_filter_enable -#ifndef CONF_USART_7_FILTER -#define CONF_USART_7_FILTER 0 -#endif - -// <q> Manchester Encoder/Decoder Enable -// <i> whether the USART Manchester Encoder/Decoder -// <id> usart_manchester_filter_enable -#ifndef CONF_USART_7_MAN -#define CONF_USART_7_MAN 0 -#endif - -// <o> Manchester Synchronization Mode -// <0=>The Manchester start bit is a 0 to 1 transition -// <1=>The Manchester start bit is a 1 to 0 transition -// <i> Manchester Synchronization Mode -// <id> usart_manchester_synchronization_mode -#ifndef CONF_USART_7_MODSYNC -#define CONF_USART_7_MODSYNC 0 -#endif - -// <o> Start Frame Delimiter Selector -// <0=>Start frame delimiter is COMMAND or DATA SYNC -// <1=>Start frame delimiter is one bit -// <i> Start Frame Delimiter Selector -// <id> usart_start_frame_delimiter -#ifndef CONF_USART_7_ONEBIT -#define CONF_USART_7_ONEBIT 0 -#endif - -// <o> Fractional Part <0-7> -// <i> Fractional part of the baud rate if baud rate generator is in fractional mode -// <id> usart_arch_fractional -#ifndef CONF_USART_7_FRACTIONAL -#define CONF_USART_7_FRACTIONAL 0x0 -#endif - -// <o> Data Order -// <0=>LSB is transmitted first -// <1=>MSB is transmitted first -// <i> Data order of the data bits in the frame -// <id> usart_arch_msbf -#ifndef CONF_USART_7_MSBF -#define CONF_USART_7_MSBF 0 -#endif - -// </e> - -#define CONF_USART_7_MODE 0x0 - -// Calculate BAUD register value in UART mode -#if CONF_FLEXCOM7_CK_SRC < 3 -#ifndef CONF_USART_7_BAUD_CD -#define CONF_USART_7_BAUD_CD ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / 8 / (2 - CONF_USART_7_OVER)) -#endif -#ifndef CONF_USART_7_BAUD_FP -#define CONF_USART_7_BAUD_FP \ - ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / (2 - CONF_USART_7_OVER) - 8 * CONF_USART_7_BAUD_CD) -#endif -#elif CONF_FLEXCOM7_CK_SRC == 3 -// No division is active. The value written in US_BRGR has no effect. -#ifndef CONF_USART_7_BAUD_CD -#define CONF_USART_7_BAUD_CD 1 -#endif -#ifndef CONF_USART_7_BAUD_FP -#define CONF_USART_7_BAUD_FP 1 -#endif -#endif - -// <<< end of configuration section >>> - -#endif // HPL_USART_CONFIG_H |